summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2021-10-13Merge release-20210927.0-71-g4e2cc2bef (automated)gVisor bot
2021-10-13Minor fixes to sharedmem.Bhasker Hariharan
Use route/protocol from packetbuffer. Sharedmem implementation should use the EgressRoute/NetworkProtocolNumber embedded in the packetbuffer rather than what is passed as parameters to Write(Raw)Packet(s). PiperOrigin-RevId: 402934171
2021-10-13Merge release-20210927.0-70-g1796cd89d (automated)gVisor bot
2021-10-13add create-only raw socketsKevin Krakauer
These can be used by applications to manipulate iptables rules without enabling arbitrary reads from and writes to the underlying packet socket. PiperOrigin-RevId: 402924733
2021-10-13Merge release-20210927.0-69-g822189379 (automated)gVisor bot
2021-10-13runsc: allow to run rootless containers on cgroupV2Andrei Vagin
Before cl/402392291 and cl/402614820, it worked without any problem. In this case, we just ignore a cgroup configuration. We do the same thing, when we don't have permissions to create new cgroups on cgroupV1. PiperOrigin-RevId: 402913129
2021-10-13Merge release-20210927.0-68-gb74bbe11e (automated)gVisor bot
2021-10-13Represent direction with booleanGhanan Gowripalan
...since direction can only hold one of two possible values. PiperOrigin-RevId: 402855698
2021-10-13Merge release-20210927.0-67-g747cb9246 (automated)gVisor bot
2021-10-12Support Twice NATGhanan Gowripalan
This CL allows both SNAT and DNAT targets to be performed on the same packet. Fixes #5696. PiperOrigin-RevId: 402714738
2021-10-13Merge release-20210927.0-66-g049fa8ea9 (automated)gVisor bot
2021-10-12Merge pull request #6654 from nickkelley42:documentation-nitsgVisor bot
PiperOrigin-RevId: 402705397
2021-10-12Merge release-20210927.0-64-ge54ee7a99 (automated)gVisor bot
2021-10-12Create constants for Keepalive defaults.Bhasker Hariharan
Fixes #6725 PiperOrigin-RevId: 402683244
2021-10-12Merge release-20210927.0-63-g08f1d9616 (automated)gVisor bot
2021-10-12Separate DNAT and SNAT manip statesGhanan Gowripalan
This change also refactors the conntrack packet handling code to not perform the actual rewriting of the packet while holding the lock. This change prepares for a followup CL that adds support for twice-NAT. Updates #5696. PiperOrigin-RevId: 402671685
2021-10-12Merge release-20210927.0-62-g035e44c7c (automated)gVisor bot
2021-10-12Make DoubleLayerEpoll use non blocking pipes.Ayush Ranjan
We don't want the read to block and want to test that epoll_wait returns only when there is data available in rfd to be read. PiperOrigin-RevId: 402631091
2021-10-12Merge release-20210927.0-61-g98a694eeb (automated)gVisor bot
2021-10-12Make cgroup creation/deletion more robustFabricio Voznika
- Don't attempt to create directory is controller is not present in the system - Ensure that all files being written exist in cgroupfs - Attempt to delete directories during Uninstall even if other deletions have failed Fixes #6446 PiperOrigin-RevId: 402614820
2021-10-12Merge release-20210927.0-60-g8682ce689 (automated)gVisor bot
2021-10-12Remove state:"nosave"/"zerovalue" annotations from all waiter.Queues.Jamie Liu
Prior to cl/318010298, //pkg/state couldn't handle pointers to struct fields, which meant that it couldn't handle intrusive linked lists, which meant that it couldn't handle waiter.Queue, which meant that it couldn't handle epoll. As a result, VFS1 unregisters all epoll waiters before saving and re-registers them after loading, and waitable VFS1 file implementations tag their waiter.Queues state:"nosave" (causing them to be skipped by the save/restore machinery) or state:"zerovalue" (causing them to only be checked for zero-value-equality on save). VFS2 required cl/318010298 to support save/restore (due to the Impl inheritance pattern used by vfs.FileDescription, vfs.Dentry, etc.); correspondingly, VFS2 epoll assumes that waiter.Queues *will be* saved and loaded correctly, and VFS2 file implementations do not tag waiter.Queues. Some waiter.Queues, e.g. pipe.Pipe.Queue and kernel.Task.signalQueue, are used by both VFS1 and VFS2 (the latter via signalfd); as a result of the above, tagging these Queues state:"nosave" or state:"zerovalue" breaks VFS2 epoll. Remove VFS1 epoll unregistration before saving (bringing it in line with VFS2), and remove these tags from all waiter.Queues. Also clean up after the epoll test added by cl/402323053, which implied this issue (by instantiating DisableSave in the new test) without reporting it. PiperOrigin-RevId: 402596216
2021-10-12Merge release-20210927.0-59-gab1ef0bab (automated)gVisor bot
2021-10-11Support DNAT targetGhanan Gowripalan
PiperOrigin-RevId: 402468096
2021-10-11Merge release-20210927.0-58-gb9176535c (automated)gVisor bot
2021-10-11Create subcontainer cgroups for compatibilityFabricio Voznika
Tools (e.g. cAdvisor) watches for changes inside /sys/fs/cgroup to detect when containers are created and deleted. With gVisor, container cgroups were not created because the containers are not visible to the host. This change enables the creation of [empty] subcontainer cgroups that can be used by tools to detect creation/deletion of subcontainers. This change required a new annotation to be added so that the shim can communicate the pod cgroup path to runsc, so pod and container cgroups can be identified, Fixes #6500 PiperOrigin-RevId: 402392291
2021-10-11Merge release-20210927.0-57-g125fae59b (automated)gVisor bot
2021-10-11Add unit test for Redirect targetGhanan Gowripalan
We already have integration tests `make iptables-tests` that tests the REDIRECT target, but unit tests are a lot faster and easier to run than the integration test. PiperOrigin-RevId: 402365412
2021-10-11Merge release-20210927.0-56-g4ea18a8a7 (automated)gVisor bot
2021-10-11Support IP_PKTINFO and IPV6_RECVPKTINFO on raw socketsGhanan Gowripalan
Updates #1584, #3556. PiperOrigin-RevId: 402354066
2021-10-11Merge release-20210927.0-55-g09a42f997 (automated)gVisor bot
2021-10-11Merge pull request #6428 from dillanzhou:fix_epoll_vfs2gVisor bot
PiperOrigin-RevId: 402323053
2021-10-09Merge release-20210927.0-53-g3f1642e4b (automated)gVisor bot
2021-10-08Remove ring0 floating point save/load functions on amd64.Jamie Liu
ring0.Save/LoadFloatingPoint() are only usable if the caller can ensure that Go will not clobber floating point registers before/after calling them respectively. Due to regabig in Go 1.17, this is no longer the case; regabig (among other things) maintains a zeroed XMM15 during ABIInternal execution, including by zeroing it after ABI0-to-ABIInternal transitions. In ring0.sysenter/exception, this happens in ring0.kernelSyscall/kernelException.abi0 respectively; in ring0.CPU.SwitchToUser, this happens after returning from ring0.sysret/iret.abi0. Delete these functions and do floating point save/load in assembly. While arm64 doesn't appear to be immediately affected (so this CL permits us to resume usage of Go 1.17), its use of Save/LoadFloatingPoint() still seems to be incorrect for the same fundamental reason (Go code can't sanely assume what registers the Go compiler will or won't use) and should be fixed eventually. PiperOrigin-RevId: 401895658
2021-10-08Merge release-20210927.0-52-g34e68b6b4 (automated)gVisor bot
2021-10-08Remove redundant slice copy in lisafs gofer client.Ayush Ranjan
listXattr() was doing redundant work. Remove it. PiperOrigin-RevId: 401871315
2021-10-08Merge release-20210927.0-51-gda41ecc5b (automated)gVisor bot
2021-10-08Disallow "trusted" namespace xattr in VFS2 gofer client.Ayush Ranjan
Allowing this namespace makes way for a lot of GetXattr RPCs to the gofer process when the gofer filesystem is the lower layer of an overlay. The overlay filesystem aggressively queries for "trusted.overlay.opaque" which in practice is never found in the lower layer gofer. But leads to a lot of wasted work. A consequence is that mutable gofer upper layer is not supported anymore but that is still consistent with VFS1. We can revisit when need arises. PiperOrigin-RevId: 401860585
2021-10-08Merge release-20210927.0-50-ge44b10065 (automated)gVisor bot
2021-10-07add convenient wrapper for eventfdKevin Krakauer
The same create/write/read pattern is copied around several places. It's easier to understand in a package with names and comments, and we can reuse the smart blocking code in package rawfile. PiperOrigin-RevId: 401647108
2021-10-07Merge release-20210927.0-49-g487651ac4 (automated)gVisor bot
2021-10-07Add a new metric to detect the number of spurious loss recoveries.Nayana Bidari
- Implements RFC 3522 (Eifel detection algorithm) to detect if the connection entered loss recovery unnecessarily. - Added a new metric to count the total number of spurious loss recoveries. - Added tests to verify the new metric. PiperOrigin-RevId: 401637359
2021-10-07Merge release-20210927.0-48-g0743a862e (automated)gVisor bot
2021-10-07Update compat list for tcpdump.Bhasker Hariharan
A libpcap change broke tcpdump support in gvisor. As a result tcpdump w/ libpcap> 1.10 fails with gvisor. Updates #6664, #6699 PiperOrigin-RevId: 401633061
2021-10-07Merge release-20210927.0-47-g710e51372 (automated)gVisor bot
2021-10-07tests: use a proper path to the kvm deviceAndrei Vagin
PiperOrigin-RevId: 401624134
2021-10-07Merge release-20210927.0-46-g3517d070c (automated)gVisor bot
2021-10-07Track UDP packets performing REDIRECT NATGhanan Gowripalan
PiperOrigin-RevId: 401620449
2021-10-07Merge release-20210927.0-45-g113009f3d (automated)gVisor bot
2021-10-07Modify the TCP test to receive re-transmitted packet before sending ACK.Nayana Bidari
TestRACKWithWindowFull was sending ACK for the last packet to avoid TLP. But, sometimes the ACK is delayed and the sender sends the re-transmitted packet before receiving ACK. The test is now modified to expect the re-transmitted packet always and then send a DSACK to avoid entering recovery. Before: http://sponge2/6473db18-137a-4afb-9d60-c3eafd236ea9 After: http://sponge2/6a0f744c-7ea3-40fa-8f76-68503bf142ca PiperOrigin-RevId: 401606848
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 17:06:50 +0000