summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2021-09-22Merge pull request #6617 from Stig124:docs-aptgVisor bot
PiperOrigin-RevId: 398393055
2021-09-22Add Execve and ExitNotifyParent checkpoints.Jamie Liu
Call sites for the two checkpoints aren't added yet. PiperOrigin-RevId: 398375903
2021-09-22Track UDP connectionsGhanan Gowripalan
This will enable NAT to be performed on UDP packets that are sent in response to packets sent by the stack. This will also enable ICMP errors to be properly NAT-ed in response to UDP packets (#5916). Updates #5915. PiperOrigin-RevId: 398373251
2021-09-22Make benchmark `String()` output prettier.Etienne Perot
PiperOrigin-RevId: 398372542
2021-09-22Fold rcv_test into tcp_testTamir Duberstein
This prevents go module errors of the form found packages tcp (accept.go) and rcv (rcv_test.go) in ... PiperOrigin-RevId: 398370042
2021-09-22Add `NewCondition` helper in `bigquery.go`.Etienne Perot
PiperOrigin-RevId: 398366805
2021-09-22Do not rate limit ICMP Echos by defaultBruno Dal Bo
As per https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt linux does not limit ICMP Echos by default. icmp_ratemask - INTEGER Mask made of ICMP types for which rates are being limited. Significant bits: IHGFEDCBA9876543210 Default mask: 0000001100000011000 (6168) Bit definitions (see include/linux/icmp.h): 0 Echo Reply 3 Destination Unreachable * 4 Source Quench * 5 Redirect 8 Echo Request B Time Exceeded * C Parameter Problem * D Timestamp Request E Timestamp Reply F Info Request G Info Reply H Address Mask Request I Address Mask Reply * These are rate limited by default (see default mask above) Equivalently for ICMPv6. Lay out foundation for ICMP rate masks, exposing that configuration will be addressed later when the need arises (#6521). Fixes #6519 PiperOrigin-RevId: 398337963
2021-09-22Change EcdsaVerify to specifically P-384 and compute the SHA384 digest.Carmen Hanish
PiperOrigin-RevId: 398336708
2021-09-22Populate forwarded packet buffer's TransportHeaderGhanan Gowripalan
Turns out certain features of iptables (e.g. NAT) will not perform any checks/work unless both the Network and Transport headers are populated. With this change, provide the packet directly to the outgoing network endpoint's `writePacket` method instead of going through `WriteHeaderIncludedPacket` which expected the headers to not be set. PiperOrigin-RevId: 398304004
2021-09-22Remove terminal usage from `runsc spec`Fabricio Voznika
Most usages of `runsc spec`+`runsc run` do not expect stdios to be a terminal. Updates #6619 PiperOrigin-RevId: 398288237
2021-09-21Handle Shutdown on connecting tcp socketArthur Sfez
Fixes #6495 PiperOrigin-RevId: 398121921
2021-09-21Deliver endpoints to the accept queue synchronously when possibleArthur Sfez
Before this change, when a new connection was created after receiving an ACK that matched a SYN-cookie, it was always delivered asynchronously to the accept queue. There was a chance that the listening endpoint would process a SYN from another client before the delivery happened, and the listening endpoint would not know yet that the queue was about to be full, once the delivery happened. Now, when an ACK matching a SYN-cookie is received, the new endpoint is created and moved to the accept queue synchronously, while holding the accept lock. Fixes #6545 PiperOrigin-RevId: 398107254
2021-09-21socket/unix: clean up socket queue after releasing a queue lockAndrei Vagin
A socket queue can contain sockets (others and this one). We have to avoid taking locks of the same class where it is possible. PiperOrigin-RevId: 398100744
2021-09-21[lisa] Implement lisafs protocol methods in VFS2 gofer client and fsgofer.Ayush Ranjan
Introduces RPC methods in lisafs. Makes that gofer client use lisafs RPCs instead of p9 when lisafs is enabled. Implements the handlers for those methods in fsgofer. Fixes #5465 PiperOrigin-RevId: 398080310
2021-09-20[lisa] Plumb lisafs through runsc.Ayush Ranjan
lisafs is only supported in VFS2. Added a runsc flag which enables lisafs. When the flag is enabled, the gofer process and the client communicate using lisafs protocol instead of 9P. Added a filesystem option in fsimpl/gofer which indicates if lisafs is being used. That will be used to gate lisafs on the gofer client. Note that this change does not make the gofer client use lisafs just yet. Updates #5465 PiperOrigin-RevId: 397917844
2021-09-20Support getsockname for packet socketsGhanan Gowripalan
Updates #6621 PiperOrigin-RevId: 397898852
2021-09-20Internal change.gVisor bot
PiperOrigin-RevId: 397813331
2021-09-20Do not allow unbinding network protocolGhanan Gowripalan
Once a packet socket is bound to a network protocol, it cannot be unbound from that protocol; the network protocol binding may only be updated to a different network protocol. To comply with Linux. PiperOrigin-RevId: 397810878
2021-09-20[lisa] lisafs package POC.Ayush Ranjan
This change mainly aims to define the semantics of communication for the LISAFS (LInux SAndbox Filesystem) protocol. This protocol aims to replace 9P and intends to bring some performance benefits with it. Some of the notable differences from the p9 package are: - Now the server implementations own the handlers. - As a result, there is no verbose interface like `p9.File` that all servers need to implement. Different implementations can extend their File implementations to varying degrees without imposing those extensions to other server implementations that might not have anything to do with those features. - If a server implementation adds a new RPC message, other implementations are not compelled to support it. I wrote a benchmark `BenchmarkSendRecv` in connection_test.go which competes with p9's `BenchmarkSendRecvChannel`. Running these on an AMD Milan machine shows that lisafs is **45%** faster. **With 9P** goos: linux goarch: amd64 pkg: gvisor/pkg/p9/p9 cpu: AMD EPYC 7B13 64-Core Processor BenchmarkSendRecvLegacy-256 82830 14053 ns/op 633 B/op 23 allocs/op BenchmarkSendRecvChannel-256 776971 1551 ns/op 184 B/op 6 allocs/op **With lisafs** goos: linux goarch: amd64 pkg: pkg/lisafs/connection_test cpu: AMD EPYC 7B13 64-Core Processor BenchmarkSendRecv-256 1399610 853.5 ns/op 48 B/op 2 allocs/op Fixes #5464 PiperOrigin-RevId: 397803163
2021-09-19Support IPV6_RECVPKTINFO on UDP socketsGhanan Gowripalan
PiperOrigin-RevId: 397631833
2021-09-19Deprecating apt-keyNicolas stig124 FORMICHELLA
As apt-key got deprecated in Debian 11 and will be deleted from Debian 12 Replace apt-key by the supported keyring + signed-by method Related : docker/docker.github.io#11625 Debian wiki : https://wiki.debian.org/DebianRepository/UseThirdParty Signed-off-by: Nicolas stig124 FORMICHELLA <stigpro@outlook.fr>
2021-09-18Avoid ambient clock on ICMP Rate LimiterBruno Dal Bo
PiperOrigin-RevId: 397496920
2021-09-17Merge pull request #6182 from zchee:atomicbitops-bpgVisor bot
PiperOrigin-RevId: 397432940
2021-09-17Allow rebinding packet socket protocolGhanan Gowripalan
...to change the network protocol a packet socket may receive packets from. This CL is a portion of an originally larger CL that was split with https://github.com/google/gvisor/commit/a8ad692fd36cbaf7f5a6b9af39d601053dbee338 being the dependent CL. That CL (accidentally) included the change in the endpoint's `afterLoad` method to take the required lock when accessing the endpoint's netProto field. That change should have been in this CL. The CL that made the change mentioned in the commit message is cl/396946187. PiperOrigin-RevId: 397412582
2021-09-17Fix lock ordering violationGhanan Gowripalan
This fixes a lock ordering violations introduced in https://github.com/google/gvisor/commit/ae3bd32011889fe59bb89946532dd7ee14973696 and https://github.com/google/gvisor/commit/477d7e5e10378e2f80f21ac9f536d12c4b94d7ce when connecting/binding sockets races with handling of packets/errors as the connect/bind path takes the transport/internal/network.Endpoint.mu lock before taking stack.endpointsByNIC.mu but the locks are taken in the reverse order when handling packets/errors. The fix is to revert the change to use a lock instead of atomics in https://github.com/google/gvisor/commit/477d7e5e10378e2f80f21ac9f536d12c4b94d7ce and introduce a new lock protecting only the endpoint info in transport/internal/network.Endpoint. ``` goroutine 60 [semacquire]: sync.runtime_Semacquire(0x62c957) go/gc/src/runtime/sema.go:56 +0x25 gvisor/pkg/sync/sync.(*CrossGoroutineRWMutex).RLock(0xc0006c4870) gvisor/pkg/sync/rwmutex_unsafe.go:76 +0x57 gvisor/pkg/sync/sync.(*RWMutex).RLock(...) gvisor/pkg/sync/rwmutex_unsafe.go:254 gvisor/pkg/tcpip/transport/internal/network/network.(*Endpoint).State(0xc0006c4858) gvisor/pkg/tcpip/transport/internal/network/endpoint.go:123 +0x3c gvisor/pkg/tcpip/transport/udp/udp.(*endpoint).HandleError(0xc0006c4840, {0x1c3a418, 0x2847498}, 0xc0006bdeea) gvisor/pkg/tcpip/transport/udp/endpoint.go:983 +0x5c gvisor/pkg/tcpip/stack/stack.(*endpointsByNIC).handleError(0xc00003dd70, 0xc0000f08c0, {0x75e1, {0xc0005da110, 0x10}, 0xdeea, {0xc0005da120, 0x10}}, {0x1c3a418, 0x2847498}, ...) gvisor/pkg/tcpip/stack/transport_demuxer.go:203 +0x254 gvisor/pkg/tcpip/stack/stack.(*transportDemuxer).deliverError(0xc00047c588, 0xc000688ca8, 0x86dd, 0x11, {0x1c3a418, 0x2847498}, 0xdf2345, {0x75e1, {0xc0005da110, 0x10}, ...}) gvisor/pkg/tcpip/stack/transport_demuxer.go:631 +0x205 gvisor/pkg/tcpip/stack/stack.(*nic).DeliverTransportError(0xc0000f08c0, {0xc0005da110, 0x10}, {0xc0005da120, 0x10}, 0x62c985, 0x0, {0x1c3a418, 0x2847498}, 0xc000299000) gvisor/pkg/tcpip/stack/nic.go:922 +0x253 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).handleControl(0xc00045d000, {0x1c3a418, 0x2847498}, 0xc000299000) gvisor/pkg/tcpip/network/ipv6/icmp.go:209 +0x3ac gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).handleICMP(0xc00045d000, 0xc000299000, 0x0, 0x10) gvisor/pkg/tcpip/network/ipv6/icmp.go:353 +0x96c gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).processExtensionHeaders(0xc00045d000, {0xc0005b7f0e, 0x28, 0x30}, 0xc000299000, 0x0) gvisor/pkg/tcpip/network/ipv6/ipv6.go:1554 +0x849 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).handleValidatedPacket(0xc00045d000, {0xc0005b7f0e, 0x28, 0x2b206370203a3033}, 0xc000299000, {0x18baf5d, 0x2}) gvisor/pkg/tcpip/network/ipv6/ipv6.go:1191 +0x396 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).HandlePacket(0xc00045d000, 0xc000031310) gvisor/pkg/tcpip/network/ipv6/ipv6.go:1107 +0x538 gvisor/pkg/tcpip/stack/stack.(*nic).DeliverNetworkPacket(0xc0000f08c0, {0x0, 0xc000688c38}, {0xc0005da09a, 0x6}, 0x86dd, 0xc000299000) gvisor/pkg/tcpip/stack/nic.go:779 +0x3fd gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).DeliverNetworkPacket(0xc0003d1f10, {0xc0005da08a, 0x6}, {0xc0005da09a, 0x6}, 0x62c985, 0x962610) gvisor/pkg/tcpip/link/nested/nested.go:59 +0xd1 gvisor/pkg/tcpip/link/sniffer/sniffer.(*endpoint).DeliverNetworkPacket(0xc0003d1f10, {0xc0005da08a, 0x6}, {0xc0005da09a, 0x6}, 0x610f56, 0x6) gvisor/pkg/tcpip/link/sniffer/sniffer.go:140 +0x87 gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).DeliverNetworkPacket(0xc0005200f0, {0xc0005da08a, 0x6}, {0xc0005da09a, 0x6}, 0x397800, 0x200) gvisor/pkg/tcpip/link/nested/nested.go:59 +0xd1 gvisor/pkg/tcpip/link/ethernet/ethernet.(*Endpoint).DeliverNetworkPacket(0xc0005200f0, {0xc0005032c0, 0x4}, {0x4, 0x26e}, 0x60d600, 0x6) gvisor/pkg/tcpip/link/ethernet/ethernet.go:63 +0x1ad gvisor/pkg/tcpip/link/loopback/loopback.(*endpoint).WriteRawPacket(0xc00019a540, 0xc000298f00) gvisor/pkg/tcpip/link/loopback/loopback.go:107 +0x191 gvisor/pkg/tcpip/link/loopback/loopback.(*endpoint).WritePacket(0x62c985, {{{0xc0005da060, 0x10}, {0xc0005da070, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/link/loopback/loopback.go:80 +0x37 gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).WritePacket(...) gvisor/pkg/tcpip/link/nested/nested.go:107 gvisor/pkg/tcpip/link/ethernet/ethernet.(*Endpoint).WritePacket(0xc0005200f0, {{{0xc0005da060, 0x10}, {0xc0005da070, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/link/ethernet/ethernet.go:78 +0x142 gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).WritePacket(...) gvisor/pkg/tcpip/link/nested/nested.go:107 gvisor/pkg/tcpip/link/sniffer/sniffer.(*endpoint).WritePacket(0xc0003d1f10, {{{0xc0005da060, 0x10}, {0xc0005da070, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/link/sniffer/sniffer.go:169 +0x108 gvisor/pkg/tcpip/stack/stack.(*nic).writePacket(0xc0000f08c0, {{{0xc0005da060, 0x10}, {0xc0005da070, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/stack/nic.go:380 +0x264 gvisor/pkg/tcpip/stack/stack.(*nic).writePacketBuffer(0xc0006c3540, {{{0xc0005da060, 0x10}, {0xc0005da070, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/stack/nic.go:324 +0xec gvisor/pkg/tcpip/stack/stack.(*nic).enqueuePacketBuffer(0xc0000f08c0, 0x62c985, 0xfc2c55, {0x1bfdac0, 0xc000298f00}) gvisor/pkg/tcpip/stack/nic.go:339 +0x234 gvisor/pkg/tcpip/stack/stack.(*nic).WritePacket(0xc000298f00, 0xffd8, 0x41a000, 0x4) gvisor/pkg/tcpip/stack/nic.go:317 +0x50 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).writePacket(0xc00045d000, 0xc0006c3540, 0xc000298f00, 0x3, 0x0) gvisor/pkg/tcpip/network/ipv6/ipv6.go:823 +0x427 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).WritePacket(0xc00045d000, 0xc0006c3540, {0x86dd, 0x0, 0x0}, 0xc000298f00) gvisor/pkg/tcpip/network/ipv6/ipv6.go:774 +0x2db gvisor/pkg/tcpip/stack/stack.(*Route).WritePacket(0xc0006c3540, {0x37a9f0, 0xc0, 0x0}, 0x86dd) gvisor/pkg/tcpip/stack/route.go:462 +0xe4 gvisor/pkg/tcpip/network/ipv6/ipv6.(*protocol).returnError(0xc000298400, {0x1c253e8, 0x2847498}, 0xc000298e00) gvisor/pkg/tcpip/network/ipv6/icmp.go:1277 +0x15f8 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).processExtensionHeaders(0xc00045d000, {0xc0005b7ece, 0x28, 0x30}, 0xc000298e00, 0x0) gvisor/pkg/tcpip/network/ipv6/ipv6.go:1565 +0x12e5 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).handleValidatedPacket(0xc00045d000, {0xc0005b7ece, 0x28, 0x0}, 0xc000298e00, {0x18baf5d, 0x2}) gvisor/pkg/tcpip/network/ipv6/ipv6.go:1191 +0x396 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).HandlePacket(0xc00045d000, 0xc0003df610) gvisor/pkg/tcpip/network/ipv6/ipv6.go:1107 +0x538 gvisor/pkg/tcpip/stack/stack.(*nic).DeliverNetworkPacket(0xc0000f08c0, {0x0, 0xc000688838}, {0xc000663fea, 0x6}, 0x86dd, 0xc000298e00) gvisor/pkg/tcpip/stack/nic.go:779 +0x3fd gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).DeliverNetworkPacket(0xc0003d1f10, {0xc000663fda, 0x6}, {0xc000663fea, 0x6}, 0x62c985, 0x962610) gvisor/pkg/tcpip/link/nested/nested.go:59 +0xd1 gvisor/pkg/tcpip/link/sniffer/sniffer.(*endpoint).DeliverNetworkPacket(0xc0003d1f10, {0xc000663fda, 0x6}, {0xc000663fea, 0x6}, 0x610f56, 0x6) gvisor/pkg/tcpip/link/sniffer/sniffer.go:140 +0x87 gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).DeliverNetworkPacket(0xc0005200f0, {0xc000663fda, 0x6}, {0xc000663fea, 0x6}, 0x397800, 0x200) gvisor/pkg/tcpip/link/nested/nested.go:59 +0xd1 gvisor/pkg/tcpip/link/ethernet/ethernet.(*Endpoint).DeliverNetworkPacket(0xc0005200f0, {0xc00003dec0, 0x2}, {0x2, 0x23e}, 0x60d600, 0x6) gvisor/pkg/tcpip/link/ethernet/ethernet.go:63 +0x1ad gvisor/pkg/tcpip/link/loopback/loopback.(*endpoint).WriteRawPacket(0xc00019a540, 0xc000298d00) gvisor/pkg/tcpip/link/loopback/loopback.go:107 +0x191 gvisor/pkg/tcpip/link/loopback/loopback.(*endpoint).WritePacket(0x62c985, {{{0xc000663fa0, 0x10}, {0xc000378f40, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/link/loopback/loopback.go:80 +0x37 gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).WritePacket(...) gvisor/pkg/tcpip/link/nested/nested.go:107 gvisor/pkg/tcpip/link/ethernet/ethernet.(*Endpoint).WritePacket(0xc0005200f0, {{{0xc000663fa0, 0x10}, {0xc000378f40, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/link/ethernet/ethernet.go:78 +0x142 gvisor/pkg/tcpip/link/nested/nested.(*Endpoint).WritePacket(...) gvisor/pkg/tcpip/link/nested/nested.go:107 gvisor/pkg/tcpip/link/sniffer/sniffer.(*endpoint).WritePacket(0xc0003d1f10, {{{0xc000663fa0, 0x10}, {0xc000378f40, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/link/sniffer/sniffer.go:169 +0x108 gvisor/pkg/tcpip/stack/stack.(*nic).writePacket(0xc0000f08c0, {{{0xc000663fa0, 0x10}, {0xc000378f40, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/stack/nic.go:380 +0x264 gvisor/pkg/tcpip/stack/stack.(*nic).writePacketBuffer(0xc0006c2fa0, {{{0xc000663fa0, 0x10}, {0xc000378f40, 0x10}, {0x1bf6590, 0x6}, {0x0, 0x0}, 0x86dd, ...}, ...}, ...) gvisor/pkg/tcpip/stack/nic.go:324 +0xec gvisor/pkg/tcpip/stack/stack.(*nic).enqueuePacketBuffer(0xc0000f08c0, 0x62c985, 0xfc2c55, {0x1bfdac0, 0xc000298d00}) gvisor/pkg/tcpip/stack/nic.go:339 +0x234 gvisor/pkg/tcpip/stack/stack.(*nic).WritePacket(0xc000298d00, 0xffd8, 0x41a000, 0x4) gvisor/pkg/tcpip/stack/nic.go:317 +0x50 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).writePacket(0xc00045d000, 0xc0006c2fa0, 0xc000298d00, 0x3, 0x0) gvisor/pkg/tcpip/network/ipv6/ipv6.go:823 +0x427 gvisor/pkg/tcpip/network/ipv6/ipv6.(*endpoint).WritePacket(0xc00045d000, 0xc0006c2fa0, {0x86dd, 0x0, 0x0}, 0xc000298d00) gvisor/pkg/tcpip/network/ipv6/ipv6.go:774 +0x2db gvisor/pkg/tcpip/stack/stack.(*Route).WritePacket(0xc0006c2fa0, {0x2080000, 0xea, 0xde}, 0x6) gvisor/pkg/tcpip/stack/route.go:462 +0xe4 gvisor/pkg/tcpip/transport/internal/network/network.(*WriteContext).WritePacket(0xc0003e05e0, 0xc000298d00, 0x0) gvisor/pkg/tcpip/transport/internal/network/endpoint.go:212 +0x154 gvisor/pkg/tcpip/transport/udp/udp.(*endpoint).write(0xc0006c4840, {0x1c23ad0, 0xc0006cfd60}, {0xc0002ecf00, 0xf0, 0xdb, 0x3}) gvisor/pkg/tcpip/transport/udp/endpoint.go:457 +0x74c gvisor/pkg/tcpip/transport/udp/udp.(*endpoint).Write(0xc0006c4840, {0x1c23ad0, 0xc0006cfd60}, {0xc0002ecf00, 0x85, 0xc9, 0x62}) gvisor/pkg/tcpip/transport/udp/endpoint.go:323 +0x74 goroutine 133 [semacquire]: sync.runtime_Semacquire(0xc00003dd70) go/gc/src/runtime/sema.go:56 +0x25 gvisor/pkg/sync/sync.(*CrossGoroutineRWMutex).Lock(0xc00003dd70) gvisor/pkg/sync/rwmutex_unsafe.go:151 +0x79 gvisor/pkg/sync/sync.(*RWMutex).Lock(...) gvisor/pkg/sync/rwmutex_unsafe.go:286 gvisor/pkg/tcpip/stack/stack.(*endpointsByNIC).unregisterEndpoint(0xc00003dd70, 0x37a300, {0x1c3a558, 0xc0006c4840}, {0x0, 0x0, 0x0}) gvisor/pkg/tcpip/stack/transport_demuxer.go:246 +0x72 gvisor/pkg/tcpip/stack/stack.(*transportEndpoints).unregisterEndpoint(0xc0004b3f40, {0x75e1, {0x0, 0x0}, 0x0, {0x0, 0x0}}, {0x1c3a558, 0xc0006c4840}, {0x0, ...}, ...) gvisor/pkg/tcpip/stack/transport_demuxer.go:52 +0x193 gvisor/pkg/tcpip/stack/stack.(*transportDemuxer).unregisterEndpoint(0xc00047c588, {0xc000663fc8, 0x2, 0x0}, 0x11, {0x75e1, {0x0, 0x0}, 0x0, {0x0, ...}}, ...) gvisor/pkg/tcpip/stack/transport_demuxer.go:527 +0x1d4 gvisor/pkg/tcpip/stack/stack.(*Stack).UnregisterTransportEndpoint(...) gvisor/pkg/tcpip/stack/stack.go:1417 gvisor/pkg/tcpip/transport/udp/udp.(*endpoint).Connect.func1(0x86dd, {0x75e1, {0x0, 0x0}, 0x0, {0x0, 0x0}}, {0x75e1, {0x0, 0x0}, ...}) gvisor/pkg/tcpip/transport/udp/endpoint.go:619 +0x433 gvisor/pkg/tcpip/transport/internal/network/network.(*Endpoint).ConnectAndThen(0xc0006c4858, {0x0, {0xc000144270, 0xa0000eade88c0}, 0xabc5}, 0xc000353518) gvisor/pkg/tcpip/transport/internal/network/endpoint.go:408 +0x3cc gvisor/pkg/tcpip/transport/udp/udp.(*endpoint).Connect(0xc0006c4840, {0x37b9e0, {0xc000144270, 0xc000328a80}, 0xc1a0}) gvisor/pkg/tcpip/transport/udp/endpoint.go:593 +0x149 ``` PiperOrigin-RevId: 397412256
2021-09-16Allow creating packet socket bound to any protocolGhanan Gowripalan
...even protocols the stack is unaware of. While I am here, annotate checklocks on stack.packetEndpointList. PiperOrigin-RevId: 397226754
2021-09-16Annotate checklocks on mutex protected fieldsGhanan Gowripalan
...to catch lock-related bugs in nogo tests. Checklocks also pointed out a locking violation which is fixed in this change. Updates #6566. PiperOrigin-RevId: 397225322
2021-09-16Rename packet_socket to packet_socket_dgramGhanan Gowripalan
...so that a later change can add a new packet_socket syscall test target that holds raw/dgram packet socket generic common tests. The current packet_socket syscall test target holds tests specific to dgram packet sockets. While I am here, remove the defines for the packet_socket_raw_test target as no code is guarded with `__linux__` in the target's sources. PiperOrigin-RevId: 397217761
2021-09-16Limit most file mmaps to the range of an int64.Jamie Liu
In the general case, files may have offsets between MaxInt64 and MaxUint64; in Linux pgoff is consistently represented by an unsigned long, and in gVisor the offset types in memmap.MappableRange are uint64. However, regular file mmap is constrained to int64 offsets (on 64-bit systems) by mm/mmap.c:file_mmap_size_max() => MAX_LFS_FILESIZE == LLONG_MAX. As a related fix, check for chunkStart overflow in fsutil.HostFileMapper; chunk offsets are uint64s, but as noted above some file types may use uint64 offsets beyond MaxInt64. Reported-by: syzbot+71342a1585aed97ed9f7@syzkaller.appspotmail.com PiperOrigin-RevId: 397136751
2021-09-16Don't allow binding to broadcast on ICMP socketsGhanan Gowripalan
...to match Linux behaviour. Fixes #5711. PiperOrigin-RevId: 397132671
2021-09-16Merge pull request #6579 from prattmic:runsc_do_profilegVisor bot
PiperOrigin-RevId: 397114051
2021-09-16runsc: add global profile collection flagsMichael Pratt
Add global flags -profile-{block,cpu,heap,mutex} and -trace which enable collection of the specified profile for the entire duration of a container execution. This provides a way to definitively start profiling before that application starts, rather than attempting to race with an out-of-band `runsc debug`. Note that only the main boot process is profiled. This exposed a bug in Task.traceExecEvent: a crash when tracing and -race are enabled. traceExecEvent is called off of the task goroutine, but uses the Task as a context, which is a violation of the Task contract. Switching to the AsyncContext fixes the issue. Fixes #220
2021-09-15Annotate checklocks on mutex protected fieldsGhanan Gowripalan
...to catch lock-related bugs in nogo tests. Also update the endpoint's state field to be accessed while the mutex is held instead of requiring atomic operations as nothing needs to call the State method while the mutex is held. Updates #6566. PiperOrigin-RevId: 397010316
2021-09-15Annotate checklocks on mutex protected fieldsGhanan Gowripalan
...to catch lock-related bugs in nogo tests. This change also disables/enables packet reception before/after save/restore with a flag that is protected by rcvMu instead of mu. Updates #6566. PiperOrigin-RevId: 396946187
2021-09-15Merge pull request #6581 from prattmic:runsc_rootlessgVisor bot
PiperOrigin-RevId: 396938550
2021-09-15Pass address properties in a single structTony Gong
Replaced the current AddAddressWithOptions method with AddAddressWithProperties which passes all address properties in a single AddressProperties type. More properties that need to be configured in the future are expected, so adding a type makes adding them easier. PiperOrigin-RevId: 396930729
2021-09-15[bind] Return EINVAL for under sized addressGhanan Gowripalan
...and EAFNOSUPPORT for unexpected address family. To comply with Linux. Updates #6021, #6575. PiperOrigin-RevId: 396893590
2021-09-14Remove extra newlineMichael Pratt
PiperOrigin-RevId: 396754242
2021-09-14Compose raw IP with datagram-based endpointGhanan Gowripalan
A raw IP endpoint's write and socket option get/set path can use the datagram-based endpoint. This change extracts tests from UDP that may also run on Raw IP sockets. Updates #6565. Test: Raw IP + datagram-based socket syscall tests. PiperOrigin-RevId: 396729727
2021-09-14Use a shared method to get loopback indexGhanan Gowripalan
Code to get the loopback interface's index is scattered throughout the syscall tests. Implement the code once and use that in tests (where applicable). While I am here, trim the dependencies/includes for network namespace tests. PiperOrigin-RevId: 396718124
2021-09-14Fix race on msgrcv(MSG_COPY).Rahat Mahmood
Previously, we weren't making a copy when a sysv message queue was receiving a message with the MSG_COPY flag. This flag indicates the message being received should be left in the queue and a copy of the message should be returned to userspace. Without the copy, a racing process can modify the original message while it's being marshalled to user memory. Reported-by: syzbot+cb15e644698b20ff4e17@syzkaller.appspotmail.com PiperOrigin-RevId: 396712856
2021-09-14Explicitly bind endpoint to a NICGhanan Gowripalan
Previously, any time a datagram-based network endpoint (e.g. UDP) was bound, the bound NIC is always set based on the bound address (if specified). However, we should only consider the endpoint bound to an NIC if a NIC was explicitly bound to. If an endpoint has been bound to an address and attempts to send packets to an unconnected remote, the endpoint will default to sending packets through the bound address' NIC if not explicitly bound to a NIC. Updates #6565. PiperOrigin-RevId: 396712415
2021-09-14Fix bug in RecvMMsgDispatcher.Bhasker Hariharan
Fixed a bug introduced in the following commit: https://github.com/google/gvisor/commit/979d6e7d77b17e94defc29515180cc75d3560383 The commit introduced a bug which causes the recvmmsg dispatcher to never exit as BlockingPoll is now called with two fds and poll will not return an error anymore if one of the FD is closed. We need to explicitly check the events for each FD to determine if the sentry FD is closed. ReadV dispatcher does not have the same issue as Readv does not rely on sk_err field of the underlying socket to determine if the socket is in an error state. Recvmmsg OTOH seems to get confused and always returns EAGAIN if poll() is called which queries the sk_err field and clears it. PiperOrigin-RevId: 396676135
2021-09-14Don't use SOL_UDP when creating socketsGhanan Gowripalan
SOL_UDP is used when get/set-ing socket options to specify the socket level. When creating normal UDP sockets, the protocol need not be specified. When creating RAW IP sockets for UDP, use IPPROTO_UDP. PiperOrigin-RevId: 396675986
2021-09-14Defer mutex unlockingGhanan Gowripalan
PiperOrigin-RevId: 396670516
2021-09-14runsc: allow rootless mode for runsc runMichael Pratt
Rootless mode seems to work fine for simple containers with runsc run, so allow its use. Since runsc run is more widely used, require a workable --network option is passed rather than automatically switching like runsc do does. Fixes #3036
2021-09-13Accept packets destined to bound addressGhanan Gowripalan
...if bound to an address. We previously checked the source of a packet instead of the destination of a packet when bound to an address. PiperOrigin-RevId: 396497647
2021-09-13Typo fix.Etienne Perot
PiperOrigin-RevId: 396476303
2021-09-13tools/show_paths.bzl: check that provider_map isn't NoneAndrei Vagin
Otherwise it can fail: $ bazel cquery pkg/p9/... --output=starlark --starlark:file=tools/show_paths.bzl ... ERROR: Starlark evaluation error for //pkg/p9/p9test:mockgen: Traceback (most recent call last): File "tools/show_paths.bzl", line 8, column 32, in format Error: 'NoneType' value has no field or method 'get' PiperOrigin-RevId: 396457764
2021-09-13Set NICID before delivering packet to raw endpointGhanan Gowripalan
...as raw endpoints expect the packet's NICID to be set. PiperOrigin-RevId: 396446552
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 16:45:28 +0000