| Age | Commit message (Collapse) | Author |
|---|
|
|
|
On Linux these are meant to be equivalent to POLLIN/POLLOUT. Rather
than hack these on in sys_poll etc it felt cleaner to just cleanup
the call sites to notify for both events. This is what linux does
as well.
Fixes #5544
PiperOrigin-RevId: 364859977
|
|
PiperOrigin-RevId: 364859173
|
|
|
|
This change sets the inner `routeInfo` struct to be a named private member
and replaces direct access with access through getters. Note that direct
access to the fields of `routeInfo` is still possible through the `RouteInfo`
struct.
Fixes #4902
PiperOrigin-RevId: 364822872
|
|
|
|
PiperOrigin-RevId: 364728696
|
|
|
|
This change is inspired by Adin's cl/355256448.
PiperOrigin-RevId: 364695931
|
|
|
|
--file-access-mounts flag is similar to --file-access, but controls
non-root mounts that were previously mounted in shared mode only.
This gives more flexibility to control how mounts are shared within
a container.
PiperOrigin-RevId: 364669882
|
|
|
|
Also adds support for clearing the setuid bit when appropriate (writing,
truncating, changing size, changing UID, or changing GID).
VFS2 only.
PiperOrigin-RevId: 364661835
|
|
|
|
Stateify methods are always called without holding the appropriate
locks. The system is paused and we know there will be no mutations
when we call Save/Load, so this is perfectly safe. However, checklocks
can't know about this, and it will always complain.
Mark stateify generated methods that touch struct fields as
"checklocksignore" to avoid this.
PiperOrigin-RevId: 364610241
|
|
|
|
|
|
These host calls are needed for Verity fs to generate/verify hashes.
PiperOrigin-RevId: 364598180
|
|
PiperOrigin-RevId: 364596526
|
|
|
|
The fio benchmark was changed to a fixed size read/write ammount
because the timed benchmark was overwhelming machine memory on
tmpfs mounts.
Now rand(read|write) operations are prohibitively long, leading to timeouts.
Split the benchmarks as they were in python bm-tools: the read/write as
fixed sized (1GB) and the rand(read|write) as timed operations (15s).
PiperOrigin-RevId: 364584436
|
|
|
|
...instead of opting out of them.
Loopback traffic should be stack-local but gVisor has some clients
that depend on the ability to receive loopback traffic that originated
from outside of the stack. Because of this, we guard this change behind
IP protocol options.
A previous change provided the facility to deny these martian loopback
packets but this change requires client to opt-in to accepting martian
loopback packets as accepting martian loopback packets are not meant
to be accepted, as per RFC 1122 section 3.2.1.3.g:
(g) { 127, <any> }
Internal host loopback address. Addresses of this form
MUST NOT appear outside a host.
PiperOrigin-RevId: 364581174
|
|
|
|
Fixes #5703
PiperOrigin-RevId: 364492235
|
|
|
|
We were only supporting dynamic struct types. With this change, users can make
any type dynamic. The tool (correctly) blindly just generates the remaining
methods needed to implement Marshallable using the 3 methods defined by the
user on the dynamic type.
This is helpful in situations like:
type StringArray []string
Added a test for such a use case.
PiperOrigin-RevId: 364463164
|
|
|
|
- Don't cleanup containers in Network.Cleanup, otherwise containers will
be killed and removed several times.
- Don't set AutoRemove for containers. This will prevent the confusing
'removal already in progress' messages.
Fixes #3795
PiperOrigin-RevId: 364404414
|
|
|
|
PiperOrigin-RevId: 364381970
|
|
|
|
This may be useful for tracking down where build tags come from and
understanding tag import issues in generated files.
PiperOrigin-RevId: 364374931
|
|
|
|
PiperOrigin-RevId: 364370595
|
|
|
|
The tests were not using the correct windowSize so the testing segments were
actually within the window for seqNumOffset=0 tests. The issue is already fixed
by #5674.
PiperOrigin-RevId: 364252630
|
|
|
|
syserror allows packages to register translators for errors. These
translators should be called prior to checking if the error is valid,
otherwise it may not account for possible errors that can be returned
from different packages, e.g. safecopy.BusError => syserror.EFAULT.
Second attempt, it passes tests now :-)
PiperOrigin-RevId: 363714508
|
|
Also, drop fio total reads/writes to 1GB as 10GB is
prohibitively slow.
PiperOrigin-RevId: 363714060
|
|
|
|
containerd usually configures both /dev and /dev/shm as tmpfs mounts, e.g.:
```
"mounts": [
...
{
"destination": "/dev",
"type": "tmpfs",
"source": "/run/containerd/io.containerd.runtime.v2.task/moby/10eedbd6a0e7937ddfcab90f2c25bd9a9968b734c4ae361318142165d445e67e/tmpfs",
"options": [
"nosuid",
"strictatime",
"mode=755",
"size=65536k"
]
},
...
{
"destination": "/dev/shm",
"type": "tmpfs",
"source": "/run/containerd/io.containerd.runtime.v2.task/moby/10eedbd6a0e7937ddfcab90f2c25bd9a9968b734c4ae361318142165d445e67e/shm",
"options": [
"nosuid",
"noexec",
"nodev",
"mode=1777",
"size=67108864"
]
},
...
```
(This is mostly consistent with how Linux is usually configured, except that
/dev is conventionally devtmpfs, not regular tmpfs. runc/libcontainer
implements OCI-runtime-spec-undocumented behavior to create
/dev/{ptmx,fd,stdin,stdout,stderr} in non-bind /dev mounts. runsc silently
switches /dev to devtmpfs. In VFS1, this is necessary to get device files like
/dev/null at all, since VFS1 doesn't support real device special files, only
what is hardcoded in devfs. VFS2 does support device special files, but using
devtmpfs is the easiest way to get pre-created files in /dev.)
runsc ignores many /dev submounts in the spec, including /dev/shm. In VFS1,
this appears to be to avoid introducing a submount overlay for /dev, and is
mostly fine since the typical mode for the /dev/shm mount is ~consistent with
the mode of the /dev/shm directory provided by devfs (modulo the sticky bit).
In VFS2, this is vestigial (VFS2 does not use submount overlays), and devtmpfs'
/dev/shm mode is correct for the mount point but not the mount. So turn off
this behavior for VFS2.
After this change:
```
$ docker run --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwt 2 root root 40 Mar 18 00:16 .
drwxr-xr-x 5 root root 360 Mar 18 00:16 ..
$ docker run --runtime=runsc --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwx 1 root root 0 Mar 18 00:16 .
dr-xr-xr-x 1 root root 0 Mar 18 00:16 ..
$ docker run --runtime=runsc-vfs2 --rm -it ubuntu:focal ls -lah /dev/shm
total 0
drwxrwxrwt 2 root root 40 Mar 18 00:16 .
drwxr-xr-x 5 root root 320 Mar 18 00:16 ..
```
Fixes #5687
PiperOrigin-RevId: 363699385
|
|
|
|
Transport demuxer and UDP tests should not use a loopback address as the
source address for packets injected into the stack as martian loopback
packets will be dropped in a later change.
PiperOrigin-RevId: 363479681
|
|
|
|
Loopback traffic should be stack-local but gVisor has some clients
that depend on the ability to receive loopback traffic that originated
from outside of the stack. Because of this, we guard this change behind
IP protocol options.
Test: integration_test.TestExternalLoopbackTraffic
PiperOrigin-RevId: 363461242
|
|
If physical pages of a memory region are not mapped yet, the kernel will
trigger KVM_EXIT_MMIO and we will map physical pages in bluepillHandler().
An instruction that triggered a fault will not be re-executed, it
will be emulated in the kernel, but it can't emulate complex
instructions like xsave, xrstor. We can touch the memory with
simple instructions to workaround this problem.
|
|
|
|
Netstack does not check ACK number for FIN-ACK packets and goes into TIMEWAIT
unconditionally. Fixing the state machine will give us back the retransmission
of FIN.
PiperOrigin-RevId: 363301883
|
|
|
