Age | Commit message (Collapse) | Author |
|
Options that do not change mount behavior inside the Sentry are
irrelevant and should not be used when looking for possible
incompatibilities between master and slave mounts.
PiperOrigin-RevId: 273593486
|
|
PiperOrigin-RevId: 273586605
|
|
Also change the default TTL to 64 to match Linux.
PiperOrigin-RevId: 273430341
|
|
PiperOrigin-RevId: 273421634
|
|
Adds two tests. One to make sure that $HOME is set when starting a container
via 'docker run' and one to make sure that $HOME is set for each container in a
multi-container sandbox.
Issue #701
PiperOrigin-RevId: 273395763
|
|
PiperOrigin-RevId: 273365058
|
|
PiperOrigin-RevId: 273364848
|
|
Adds minimal security policy info to SECURITY.md. This allows Github to
advertise the security policy doc for the repo.
See: https://github.blog/changelog/2019-05-23-security-policy/
See: https://help.github.com/en/articles/adding-a-security-policy-to-your-repository
PiperOrigin-RevId: 273214306
|
|
PiperOrigin-RevId: 272987037
|
|
Also ensure that all flipcall transport errors not returned by p9 (converted to
EIO by the client, or dropped on the floor by channel server goroutines) are
logged.
PiperOrigin-RevId: 272963663
|
|
In Linux (include/linux/types.h), mode_t is an unsigned short.
PiperOrigin-RevId: 272956350
|
|
The behavior for sending and receiving local broadcast (255.255.255.255)
traffic is as follows:
Outgoing
--------
* A broadcast packet sent on a socket that is bound to an interface goes out
that interface
* A broadcast packet sent on an unbound socket follows the route table to
select the outgoing interface
+ if an explicit route entry exists for 255.255.255.255/32, use that one
+ else use the default route
* Broadcast packets are looped back and delivered following the rules for
incoming packets (see next). This is the same behavior as for multicast
packets, except that it cannot be disabled via sockopt.
Incoming
--------
* Sockets wishing to receive broadcast packets must bind to either INADDR_ANY
(0.0.0.0) or INADDR_BROADCAST (255.255.255.255). No other socket receives
broadcast packets.
* Broadcast packets are multiplexed to all sockets matching it. This is the
same behavior as for multicast packets.
* A socket can bind to 255.255.255.255:<port> and then receive its own
broadcast packets sent to 255.255.255.255:<port>
In addition, this change implicitly fixes an issue with multicast reception. If
two sockets want to receive a given multicast stream and one is bound to ANY
while the other is bound to the multicast address, only one of them will
receive the traffic.
PiperOrigin-RevId: 272792377
|
|
PiperOrigin-RevId: 272760964
|
|
The input file descriptor is always a regular file, so sendfile can't lose any
data if it will not be able to write them to the output file descriptor.
Reported-by: syzbot+22d22330a35fa1c02155@syzkaller.appspotmail.com
PiperOrigin-RevId: 272730357
|
|
https://github.com/google/gvisor/commit/dd69b49ed1103bab82a6b2ac95221b89b46f3376
makes this test take longer.
PiperOrigin-RevId: 272535892
|
|
PiperOrigin-RevId: 272522508
|
|
Spoiler alert: it doesn't.
PiperOrigin-RevId: 272513529
|
|
Right now, we can find more than one process with the 1 PID in /proc.
$ for i in `seq 10`; do
> unshare -fp sleep 1000 &
> done
$ ls /proc
1 1 1 1 12 18 24 29 6 loadavg net sys version
1 1 1 1 16 20 26 32 cpuinfo meminfo self thread-self
1 1 1 1 17 21 28 36 filesystems mounts stat uptime
PiperOrigin-RevId: 272506593
|
|
|
|
PiperOrigin-RevId: 272324038
|
|
b/135475885 was fixed by cl/271434565.
PiperOrigin-RevId: 272320178
|
|
gVisor does not currently implement the functionality that would result in
AT_SECURE = 1, but Linux includes AT_SECURE = 0 in the normal case, so we
should do the same.
PiperOrigin-RevId: 272311488
|
|
PiperOrigin-RevId: 272286122
|
|
Tests in the blacklist will be explicitly skipped (with associated log line).
Checks in a blacklist for the nodejs tests.
PiperOrigin-RevId: 272272749
|
|
Refactoring in 0036d1f7eb95bcc52977f15507f00dd07018e7e2 (v4.10) caused Linux to
start unconditionally zeroing the remainder of the last page in the
interpreter. Previously it did not due so if filesz == memsz, and *still* does
not do so when filesz == memsz for loading binaries, only interpreter.
This inconsistency is not worth replicating in gVisor, as it is arguably a bug,
but our tests must ensure we create interpreter ELFs compatible with this new
requirement.
PiperOrigin-RevId: 272266401
|
|
Kernel.cpuClockTicker increments kernel.cpuClock, which tasks use as a clock to
track their CPU usage. This improves latency in the syscall path by avoid
expensive monotonic clock calls on every syscall entry/exit.
However, this timer fires every 10ms. Thus, when all tasks are idle (i.e.,
blocked or stopped), this forces a sentry wakeup every 10ms, when we may
otherwise be able to sleep until the next app-relevant event. These wakeups
cause the sentry to utilize approximately 2% CPU when the application is
otherwise idle.
Updates to clock are not strictly necessary when the app is idle, as there are
no readers of cpuClock. This commit reduces idle CPU by disabling the timer
when tasks are completely idle, and computing its effects at the next wakeup.
Rather than disabling the timer as soon as the app goes idle, we wait until the
next tick, which provides a window for short sleeps to sleep and wakeup without
doing the (relatively) expensive work of disabling and enabling the timer.
PiperOrigin-RevId: 272265822
|
|
PiperOrigin-RevId: 272262368
|
|
'docker exec' was getting CAP_NET_RAW even when --net-raw=false
because it was not filtered out from when copying container's
capabilities.
PiperOrigin-RevId: 272260451
|
|
Linux changed this behavior in 16e72e9b30986ee15f17fbb68189ca842c32af58
(v4.11). Previously, extra pages were always mapped RW. Now, those pages will
be executable if the segment specified PF_X. They still must be writeable.
PiperOrigin-RevId: 272256280
|
|
Reported-by: syzbot+bb5ed342be51d39b0cbb@syzkaller.appspotmail.com
PiperOrigin-RevId: 272110815
|
|
It isn't allowed to splice data from and into the same pipe.
But right now this check is broken, because we don't check that both ends are
pipes.
PiperOrigin-RevId: 272107022
|
|
PiperOrigin-RevId: 272101930
|
|
PiperOrigin-RevId: 272083936
|
|
PiperOrigin-RevId: 272059043
|
|
Netstack always picks a random start point everytime PickEphemeralPort
is called. While this is required for UDP so that DNS requests go
out through a randomized set of ports it is not required for TCP. Infact
Linux explicitly hashes the (srcip, dstip, dstport) and a one time secret
initialized at start of the application to get a random offset. But to
ensure it doesn't start from the same point on every scan it uses a static
hint that is incremented by 2 in every call to pick ephemeral ports.
The reason for 2 is Linux seems to split the port ranges where active connects
seem to use even ones while odd ones are used by listening sockets.
This CL implements a similar strategy where we use a hash + hint to generate
the offset to start the search for a free Ephemeral port.
This ensures that we cycle through the available port space in order for
repeated connects to the same destination and significantly reduces the
chance of picking a recently released port.
PiperOrigin-RevId: 272058370
|
|
The gofer's CachingInodeOperations implementation contains an optimization for
the common open-read-close pattern when we have a host FD. In this case, the
host kernel will update the timestamp for us to a reasonably close time, so we
don't need an extra RPC to the gofer.
However, when the app explicitly sets the timestamps (via futimes or similar)
then we actually DO need to update the timestamps, because the host kernel
won't do it for us.
To fix this, a new boolean `forceSetTimestamps` was added to
CachineInodeOperations.SetMaskedAttributes. It is only set by
gofer.InodeOperations.SetTimestamps.
PiperOrigin-RevId: 272048146
|
|
It looks like the old code attempted to do this, but didn't realize that err !=
nil even in the happy case.
PiperOrigin-RevId: 272005887
|
|
One would reasonably assume that a field named "regex" would expect
a regular expression. However, in this case, one would be wrong.
The "regex" field actually requires "FileSet" [1] syntax.
?\_(?)_/?
[1] http://ant.apache.org/manual/Types/fileset.html
PiperOrigin-RevId: 271917356
|
|
PiperOrigin-RevId: 271675009
|
|
PiperOrigin-RevId: 271665517
|
|
PiperOrigin-RevId: 271664207
|
|
PiperOrigin-RevId: 271649711
|
|
PiperOrigin-RevId: 271644926
|
|
We don't want to upload packages from the presubmit jobs.
This will fix the error:
[11:01:34][ERROR] Cannot inject environment variables into
the build without allowed_env_vars regexes.
PiperOrigin-RevId: 271622996
|
|
BUILD:85:1: in _pkg_deb rule //runsc:runsc-debian: target
'//runsc:runsc-debian' depends on deprecated target
'@bazel_tools//tools/build_defs/pkg:make_deb': The internal version of
make_deb is deprecated. Please use the replacement for pkg_deb from
https://github.com/bazelbuild/rules_pkg/blob/master/pkg.
PiperOrigin-RevId: 271590386
|
|
Updates #235
PiperOrigin-RevId: 271475319
|
|
PiperOrigin-RevId: 271442321
|
|
https://github.com/bazelbuild/bazel/issues/7899 was fixed
and we don't need this hack anymore.
PiperOrigin-RevId: 271434565
|
|
Signed-off-by: Kenta Tada <Kenta.Tada@sony.com>
|
|
PiperOrigin-RevId: 271235134
|