summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-07-01Fix FAQ URLMichael Pratt
The existing gvisor.dev/faq link returns 404 because the full URL has mistakenly been capitalized. PiperOrigin-RevId: 319233173
2020-07-01Complete async signal delivery support in vfs2.Dean Deng
- Support FIOASYNC, FIO{SET,GET}OWN, SIOC{G,S}PGRP (refactor getting/setting owner in the process). - Unset signal recipient when setting owner with pid == 0 and valid owner type. Updates #2923. PiperOrigin-RevId: 319231420
2020-07-01Fix HTTPD benchmarks to correctly serve files from /tmp.Bhasker Hariharan
Fixes #3113 PiperOrigin-RevId: 319216671
2020-06-30Fix two bugs in TCP sender.Bhasker Hariharan
a) When GSO is in use we should not cap the segment to maxPayloadSize in sender.maybeSendSegment as the GSO logic will cap the segment to the correct size. Without this the host GSO is not used as we end up breaking up large segments into small MSS sized segments before writing the packets to the host. b) The check to not split a segment due to it not fitting in the receiver window when there are pending segments is incorrect as segments in writeList can be really large as we just take the write call's buffer size and create a single large segment. So a write of say 128KB will just be 1 segment in the writeList. The linux code checks if 1 MSS sized segments fits in the receiver's window and if not then does not split the current segment. gVisor's check was incorrect that it was checking if the whole segment which could be >>> 1 MSS would fit in the receiver's window. This was causing us to prematurely stop sending and falling back to retransmit timer/probe from the other end to send data. This was seen when running HTTPD benchmarks where @ HEAD when sending large files the benchmark was taking forever to run. The tcp_splitseg_mss_test.go is being deleted as the test as written doesn't test what is intended correctly. This is because GSO is enabled by default and the reason the MSS+1 sized segment is sent is because GSO is in use. A proper test will require disabling GSO on linux and netstack which is going to take a bit of work in packetimpact to do it correctly. Separately a new test probably should be written that verifies that a segment > availableWindow is not split if the availableWindow is < 1 MSS. Fixes #3107 PiperOrigin-RevId: 319172089
2020-06-30Fix index calculation for /proc/[pid]/cmdline.Dean Deng
We were truncating buf using a index relative to the middle of the slice (i.e. where envv begins), but we need to calculate the index relative to the entire slice. Updates #2923. PiperOrigin-RevId: 319154950
2020-06-30Allow O_DIRECT on vfs2 tmpfs files.Dean Deng
Updates #2923. PiperOrigin-RevId: 319153792
2020-06-30Add missing newline in /sys/devices/systen/cpu/onineBhasker Hariharan
PiperOrigin-RevId: 319143410
2020-06-30Remove struct packing to fix compiler warning.Dean Deng
-Waddress-of-packed-member warns on inet_aton() being used with a packed struct member. This was added in cl/291990716. PiperOrigin-RevId: 319111253
2020-06-30Avoid multiple atomic loadsTamir Duberstein
...by calling (*tcp.endpoint).EndpointState only once when possible. Avoid wrapping (*sleep.Waker).Assert in a useless func while I'm here. PiperOrigin-RevId: 319074149
2020-06-30Add build target for the provisional style guide.Dean Deng
This includes the provisional style guide in the website and fixes the broken link from CONTRIBUTING.md. The style guide will be located under the "Community" category as it's related to contributing to the project. Also, add missing includes that were causing some presubmits to fail. PiperOrigin-RevId: 319061410
2020-06-29Refactor udp_socket_testZach Koopmans
Bring udp_socket_test into complianc by: - Eliminating IsRunningOnGvisor() invocations. - Wrapping sockets in RAII FileDescriptor objects. - Creating a Bind() method so that the first bind happens on port 0. PiperOrigin-RevId: 318909396
2020-06-27Port GETOWN, SETOWN fcntls to vfs2.Dean Deng
Also make some fixes to vfs1's F_SETOWN. The fcntl test now entirely passes on vfs2. Fixes #2920. PiperOrigin-RevId: 318669529
2020-06-27Support sticky bit in vfs2.Dean Deng
Updates #2923. PiperOrigin-RevId: 318648128
2020-06-27Add documentation for vfs2 inotify.Dean Deng
Updates #1479. PiperOrigin-RevId: 318631247
2020-06-26Add style guide.Ian Gudger
PiperOrigin-RevId: 318591900
2020-06-26Add tests for eventfd/timerfd/inotify operations that should return ESPIPE.Dean Deng
PiperOrigin-RevId: 318585377
2020-06-26IPv6 raw sockets. Needed for ip6tables.Kevin Krakauer
IPv6 raw sockets never include the IPv6 header. PiperOrigin-RevId: 318582989
2020-06-26Implement SO_NO_CHECK socket option.gVisor bot
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket (UDP checksum is optional on IPv4). Test: - TestNoChecksum - SoNoCheckOffByDefault (UdpSocketTest) - SoNoCheck (UdpSocketTest) Fixes #3055 PiperOrigin-RevId: 318575215
2020-06-26Packetimpact test for IPv6 unknown options actionZeling Feng
The Option Type identifiers are internally encoded such that their highest-order two bits specify the action that must be taken if the processing IPv6 node does not recognize the Option Type: 00 - skip over this option and continue processing the header. 01 - discard the packet. 10 - discard the packet and, regardless of whether or not the packet's Destination Address was a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. 11 - discard the packet and, only if the packet's Destination Address was not a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. PiperOrigin-RevId: 318566613
2020-06-26Require CAP_SYS_ADMIN in the root user namespace for TTY theftKevin Krakauer
PiperOrigin-RevId: 318563543
2020-06-26Support IPv6 extension headers in packetimpact tests.Zeling Feng
- IPv6 HopByHop Options Extension Header - IPv6 Destination Options Extension Header PiperOrigin-RevId: 318551425
2020-06-26Support inotify IN_ONESHOT.Dean Deng
Also, while we're here, make sure that gofer inotify events are generated when files are created in remote revalidating mode. Updates #1479. PiperOrigin-RevId: 318536354
2020-06-26Merge pull request #2931 from ridwanmsharif:ridwanmsharif/fuse-char-devicegVisor bot
PiperOrigin-RevId: 318511615
2020-06-26Enable docker IPv6 in kokoroKevin Krakauer
We need docker IPv6 for ip6tables tests. Docker has spotty IPv6 support, so just enabling IPv6 in daemon.json breaks the Ruby image test (AFAICT it breaks anything that tries to use IPv6 to reach the internet). An ip6tables NAT rule is added to handle this. We could make these changes as part of scripts/, but these would overwrite global values and possibly break users' systems. PiperOrigin-RevId: 318508209
2020-06-25conntrack refactor, no behavior changesKevin Krakauer
- Split connTrackForPacket into 2 functions instead of switching on flag - Replace hash with struct keys. - Remove prefixes where possible - Remove unused connStatus, timeout - Flatten ConnTrack struct a bit - some intermediate structs had no meaning outside of the context of their parent. - Protect conn.tcb with a mutex - Remove redundant error checking (e.g. when is pkt.NetworkHeader valid) - Clarify that HandlePacket and CreateConnFor are the expected entrypoints for ConnTrack PiperOrigin-RevId: 318407168
2020-06-25Avoid an allocation in epollTamir Duberstein
PiperOrigin-RevId: 318346153
2020-06-25Test that the fuse device can be openedRidwan Sharif
2020-06-25Moved FUSE device under the fuse directoryRidwan Sharif
2020-06-25Add FUSE character deviceRidwan Sharif
This change adds a FUSE character device backed by devtmpfs. This device will be used to establish a connection between the FUSE server daemon and fusefs. The FileDescriptionImpl methods will be implemented as we flesh out fusefs some more. The tests assert that the device can be opened and used.
2020-06-25Drop unused markdown links.Adin Scannell
PiperOrigin-RevId: 318284693
2020-06-24Fix procfs bugs in vfs2.Dean Deng
- Support writing on proc/[pid]/{uid,gid}map - Return EIO for writing to static files. Updates #2923. PiperOrigin-RevId: 318188503
2020-06-24Internal change.gVisor bot
PiperOrigin-RevId: 318180382
2020-06-24Port /dev/net/tun device to VFS2.Nicolas Lacasse
Updates #2912 #1035 PiperOrigin-RevId: 318162565
2020-06-24Remove waiter.Entry.ContextTamir Duberstein
This field is redundant since state can be stored in the callback. PiperOrigin-RevId: 318134855
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-23Support for saving pointers to fields in the state package.Adin Scannell
Previously, it was not possible to encode/decode an object graph which contained a pointer to a field within another type. This was because the encoder was previously unable to disambiguate a pointer to an object and a pointer within the object. This CL remedies this by constructing an address map tracking the full memory range object occupy. The encoded Refvalue message has been extended to allow references to children objects within another object. Because the encoding process may learn about object structure over time, we cannot encode any objects under the entire graph has been generated. This CL also updates the state package to use standard interfaces intead of reflection-based dispatch in order to improve performance overall. This includes a custom wire protocol to significantly reduce the number of allocations and take advantage of structure packing. As part of these changes, there are a small number of minor changes in other places of the code base: * The lists used during encoding are changed to use intrusive lists with the objectEncodeState directly, which required that the ilist Len() method is updated to work properly with the ElementMapper mechanism. * A bug is fixed in the list code wherein Remove() called on an element that is already removed can corrupt the list (removing the element if there's only a single element). Now the behavior is correct. * Standard error wrapping is introduced. * Compressio was updated to implement the new wire.Reader and wire.Writer inteface methods directly. The lack of a ReadByte and WriteByte caused issues not due to interface dispatch, but because underlying slices for a Read or Write call through an interface would always escape to the heap! * Statify has been updated to support the new APIs. See README.md for a description of how the new mechanism works. PiperOrigin-RevId: 318010298
2020-06-23Resolve remaining inotify TODOs.Dean Deng
Also refactor HandleDeletion(). Updates #1479. PiperOrigin-RevId: 317989000
2020-06-23Clean up hostfs TODOs.Dean Deng
This CL does a handful of things: - Support O_DSYNC, O_SYNC - Support O_APPEND and document an unavoidable race condition - Ignore O_DIRECT; we probably don't want to allow applications to set O_DIRECT on the host fd itself. - Leave a TODO for supporting O_NONBLOCK, which is a simple fix once RWF_NOWAIT is supported. - Get rid of caching TODO; force_page_cache is not configurable for host fs in vfs1 or vfs2 after whitelist fs was removed. - For the remaining TODOs, link to more specific bugs. Fixes #1672. PiperOrigin-RevId: 317985269
2020-06-23Add support for SO_REUSEADDR to TCP sockets/endpoints.Ian Gudger
For TCP sockets, SO_REUSEADDR relaxes the rules for binding addresses. gVisor/netstack already supported a behavior similar to SO_REUSEADDR, but did not allow disabling it. This change brings the SO_REUSEADDR behavior closer to the behavior implemented by Linux and adds a new SO_REUSEADDR disabled behavior. Like Linux, SO_REUSEADDR is now disabled by default. PiperOrigin-RevId: 317984380
2020-06-23Port /dev/tty device to VFS2.Nicolas Lacasse
Support is limited to the functionality that exists in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317981417
2020-06-23Complete inotify IN_EXCL_UNLINK implementation in VFS2.Dean Deng
Events were only skipped on parent directories after their children were unlinked; events on the unlinked file itself need to be skipped as well. As a result, all Watches.Notify() calls need to know whether the dentry where the call came from was unlinked. Updates #1479. PiperOrigin-RevId: 317979476
2020-06-23Nit fix: Create and use a std::string object for `const char*`.Ting-Yu Wang
PiperOrigin-RevId: 317973144
2020-06-23Support inotify in vfs2 gofer fs.Dean Deng
Because there is no inode structure stored in the sandbox, inotify watches must be held on the dentry. This would be an issue in the presence of hard links, where multiple dentries would need to share the same set of watches, but in VFS2, we do not support the internal creation of hard links on gofer fs. As a result, we make the assumption that every dentry corresponds to a unique inode. Furthermore, dentries can be cached and then evicted, even if the underlying file has not be deleted. We must prevent this from occurring if there are any watches that would be lost. Note that if the dentry was deleted or invalidated (d.vfsd.IsDead()), we should still destroy it along with its watches. Additionally, when a dentry’s last watch is removed, we cache it if it also has zero references. This way, the dentry can eventually be evicted from memory if it is no longer needed. This is accomplished with a new dentry method, OnZeroWatches(), which is called by Inotify.RmWatch and Inotify.Release. Note that it must be called after all inotify locks are released to avoid violating lock order. Stress tests are added to make sure that inotify operations don't deadlock with gofer.OnZeroWatches. Updates #1479. PiperOrigin-RevId: 317958034
2020-06-23Deflake proc test: Don't fail on DT_UNKNOWN.Ting-Yu Wang
Per manual page: "All applications must properly handle a return of DT_UNKNOWN." PiperOrigin-RevId: 317957013
2020-06-23Port readahead to VFS2.Nicolas Lacasse
It preserves the same functionality (almost none) as in VFS1. Updates #2923 #1035 PiperOrigin-RevId: 317943522
2020-06-23Internal change.gVisor bot
PiperOrigin-RevId: 317941748
2020-06-23Merge pull request #2272 from lubinszARM:pr_serr_injectiongVisor bot
PiperOrigin-RevId: 317933650
2020-06-22Only allow regular files, sockets, pipes, and char devices to be imported.Dean Deng
PiperOrigin-RevId: 317796028
2020-06-22Fix the way PR build clones gVisor.Ayush Ranjan
Copybara force-pushes to the PR immediately before merging which triggers a PR build. Since the PR is merged, the refspec +refs/pull/{pr_num}/merge is not available and the build fails causing all master commit CI builds to show a failure. This change remove the clone step from travis and clone manually in a way which always would succeed. We fetch +refs/pull/{pr_num}/head and cherry pick that onto the target branch. I have tested this in https://github.com/ayushr2/gvisor/pull/1 and https://github.com/ayushr2/gvisor/pull/2. PiperOrigin-RevId: 317759891
2020-06-22Check for invalid trailing / when traversing path in gofer OpenAt.Dean Deng
Updates #2923. PiperOrigin-RevId: 317700049
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 12:52:55 +0000