Age | Commit message (Collapse) | Author |
|
Internal tools timeout after 60s during tests that are required to pass before
changes can be submitted. Separate out NDP tests into its own package to help
prevent timeouts when testing.
PiperOrigin-RevId: 288990597
|
|
PiperOrigin-RevId: 288965915
|
|
This makes it possible to call the sockopt from go even when the NIC has no
name.
PiperOrigin-RevId: 288955236
|
|
...retrievable later via stack.NICInfo().
Clients of this library can use it to add metadata that should be tracked
alongside a NIC, to avoid having to keep a map[tcpip.NICID]metadata mirroring
stack.Stack's nic map.
PiperOrigin-RevId: 288924900
|
|
PiperOrigin-RevId: 288921032
|
|
Add a new CancellableTimer type to encapsulate the work of safely stopping
timers when it fires at the same time some "related work" is being handled. The
term "related work" is some work that needs to be done while having obtained
some common lock (L).
Example: Say we have an invalidation timer that may be extended or cancelled by
some event. Creating a normal timer and simply cancelling may not be sufficient
as the timer may have already fired when the event handler attemps to cancel it.
Even if the timer and event handler obtains L before doing work, once the event
handler releases L, the timer will eventually obtain L and do some unwanted
work.
To prevent the timer from doing unwanted work, it checks if it should early
return instead of doing the normal work after obtaining L. When stopping the
timer callers must have L locked so the timer can be safely informed that it
should early return.
Test: Tests that CancellableTimer fires and resets properly. Test to make sure
the timer fn is not called after being stopped within the lock L.
PiperOrigin-RevId: 288806984
|
|
This change calls a new Truncate method on the EndpointReader in RecvMsg for
both netlink and unix sockets. This allows readers such as sockets to peek at
the length of data without actually reading it to a buffer.
Fixes #993 #1240
PiperOrigin-RevId: 288800167
|
|
PiperOrigin-RevId: 288799694
|
|
Panic found by syzakller.
PiperOrigin-RevId: 288799046
|
|
For everyone's joy, this is a tool that reopens issues that
have been closed, but are still referenced by TODOs in the
code. The idea is to run it in Kokoro nightly. Kokoro changes
are coming up next.
PiperOrigin-RevId: 288789560
|
|
...and port V6OnlyOption to it.
PiperOrigin-RevId: 288789451
|
|
PiperOrigin-RevId: 288779416
|
|
PiperOrigin-RevId: 288772878
|
|
PiperOrigin-RevId: 288767927
|
|
PiperOrigin-RevId: 288743614
|
|
Updates #1195
PiperOrigin-RevId: 288725745
|
|
PacketLooping is already a member on the passed Route.
PiperOrigin-RevId: 288721500
|
|
...enabling us to remove the "CreateNamedLoopbackNIC" variant of
CreateNIC and all the plumbing to connect it through to where the value
is read in FindRoute.
PiperOrigin-RevId: 288713093
|
|
PiperOrigin-RevId: 288642552
|
|
The write tests are fitted to Linux-specific behavior, but it is not
well-specified. Tweak the tests to allow for both acceptable outcomes.
PiperOrigin-RevId: 288606386
|
|
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it
should not be used for new connections unless a more preferred endpoint is not
available, or unless the deprecated endpoint was explicitly requested.
Test: Test that deprecated endpoints are only returned when more preferred
endpoints are not available and SLAAC addresses are deprecated after its
preferred lifetime
PiperOrigin-RevId: 288562705
|
|
Test: Test that an IPv6 link-local address is not auto-generated for loopback
NICs, even when it is enabled for non-loopback NICS.
PiperOrigin-RevId: 288519591
|
|
PiperOrigin-RevId: 288402480
|
|
Pass the NIC-internal name to the NIC name function when generating opaque IIDs
so implementations can use the name that was provided when the NIC was created.
Previously, explicit NICID to NIC name resolution was required from the netstack
integrator.
Tests: Test that the name provided when creating a NIC is passed to the NIC name
function when generating opaque IIDs.
PiperOrigin-RevId: 288395359
|
|
Right now, we need to call ptrace(PTRACE_SYSCALL) and wait() twice to execute
one system call in a stub process. With these changes, we will need to call
ptrace + wait only once.
In addition, this allows to workaround the kernel bug when a stub process
doesn't stop on syscall-exit-stop and starts executing the next system call.
Reported-by: syzbot+37143cafa8dc3b5008ee@syzkaller.appspotmail.com
PiperOrigin-RevId: 288393029
|
|
- Renamed memfs to tmpfs.
- Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/
- Changed tmpfs to be backed by filemem instead of byte slice.
- regularFileReadWriter uses a sync.Pool, similar to gofer client.
PiperOrigin-RevId: 288356380
|
|
PiperOrigin-RevId: 288342928
|
|
Currently, shm.Registry.FindByID will return Shm instances without taking an
additional reference on them, making it possible for them to disappear.
More explicitly handle references. All callers hold a reference for the
duration that they hold the instance. Registry.shms may transitively hold Shms
with no references, so it must TryIncRef to determine if they are still valid.
PiperOrigin-RevId: 288314529
|
|
Support using opaque interface identifiers when generating IPv6 addresses via
SLAAC when configured to do so.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Test: Test that when SLAAC addresses are generated, they use opaque interface
identifiers when configured to do so.
PiperOrigin-RevId: 288078605
|
|
PiperOrigin-RevId: 288075400
|
|
Support generating opaque interface identifiers as defined by RFC 7217 for
auto-generated IPv6 link-local addresses. Opaque interface identifiers will also
be used for IPv6 addresses auto-generated via SLAAC in a later change.
Note, this change does not handle retries in response to DAD conflicts yet.
That will also come in a later change.
Tests: Test that when configured to generated opaque IIDs, they are properly
generated as outlined by RFC 7217.
PiperOrigin-RevId: 288035349
|
|
- Add FileDescriptionOptions.UseDentryMetadata, which reduces the amount of
boilerplate needed for device FDs and the like between filesystems.
- Switch back to having FileDescription.Init() take references on the Mount and
Dentry; otherwise managing refcounts around failed calls to
OpenDeviceSpecialFile() / Device.Open() is tricky.
PiperOrigin-RevId: 287575574
|
|
Updates #1195
PiperOrigin-RevId: 287269106
|
|
Updates #1195
PiperOrigin-RevId: 287227722
|
|
PiperOrigin-RevId: 287225250
|
|
PiperOrigin-RevId: 287221280
|
|
PiperOrigin-RevId: 287217899
|
|
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If
enabled, TOS from the incoming Network Header passed as ancillary data in the
ControlMessages.
Test:
* Added unit test to udp_test.go that tests getting/setting as well as
verifying that we receive expected TOS from incoming packet.
* Added a syscall test
PiperOrigin-RevId: 287029703
|
|
There are 2 jobs have been finished in this patch:
1, a comment was added to explain the purpose of the extra NOPs in Vectors().
2, some merge errors were fixed.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
It was calling Dentry.InsertChild with the dentry's mutex
already locked.
Updates #1035
PiperOrigin-RevId: 286962742
|
|
- Make FilesystemImpl methods that operate on parent directories require
!rp.Done() (i.e. there is at least one path component to resolve) as
precondition and postcondition (in cases where they do not finish path
resolution due to mount boundary / absolute symlink), and require that they
do not need to follow the last path component (the file being created /
deleted) as a symlink. Check for these in VFS.
- Add FilesystemImpl.GetParentDentryAt(), which is required to obtain the old
parent directory for VFS.RenameAt(). (Passing the Dentry to be renamed
instead has the wrong semantics if the file named by the old path is a mount
point since the Dentry will be on the wrong Mount.)
- Update memfs to implement these methods correctly (?), including RenameAt.
- Change fspath.Parse() to allow empty paths (to simplify implementation of
AT_EMPTY_PATH).
- Change vfs.PathOperation to take a fspath.Path instead of a raw pathname;
non-test callers will need to fspath.Parse() pathnames themselves anyway in
order to detect absolute paths and select PathOperation.Start accordingly.
PiperOrigin-RevId: 286934941
|
|
bm-tools requires python3 and pip3 in order to run
tests. Add pip3 so that dependencies correctly install
for Kokoro runs with bazel.
PiperOrigin-RevId: 286923840
|
|
This change supports clearing all host-only NDP state when NICs become routers.
All discovered routers, discovered on-link prefixes and auto-generated addresses
will be invalidated when becoming a router. This is because normally, routers do
not process Router Advertisements to discover routers or on-link prefixes, and
do not do SLAAC.
Tests: Unittest to make sure that all discovered routers, discovered prefixes
and auto-generated addresses get invalidated when transitioning from a host to
a router.
PiperOrigin-RevId: 286902309
|
|
Linux PTRACE_SYSEMU support on arm64 was merged to mainline from
V5.3, and the corresponding support in go also enabled recently.
Since the "syscall" package is locked down from go 1.4, so the ptrace
PTRACE_SYSEMU definition can't be added to package "syscall" on arm64.
According to the golang community, updates required by new systems or
versions should use the corresponding package in the golang.org/x/sys
repository instead(https://golang.org/pkg/syscall/).
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2f917bb2be62f990c3e158e2bb99e094ea03f751
|
|
PiperOrigin-RevId: 286667216
|
|
PiperOrigin-RevId: 286666533
|
|
PiperOrigin-RevId: 286660774
|
|
PiperOrigin-RevId: 286639163
|
|
PiperOrigin-RevId: 286616668
|
|
Otherwise, CopyInFDSet will try to allocate a negative-length slice.
PiperOrigin-RevId: 286584907
|