Age | Commit message (Collapse) | Author |
|
Use fd.next to store the iteration start position, which can be used to accelerate allocating new FDs.
And adding the corresponding gtest benchmark to measure performance.
@tanjianfeng
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/758 from DarcySail:master 96685ec7886dfe1a64988406831d3bc002b438cc
PiperOrigin-RevId: 276351250
|
|
This change introduces a new interface, stack.NDPDispatcher. It can be
implemented by the netstack integrator to receive NDP related events. As of this
change, only DAD related events are supported.
Tests: Existing tests were modified to use the NDPDispatcher's DAD events for
DAD tests where it needed to wait for DAD completing (failing and resolving).
PiperOrigin-RevId: 276338733
|
|
Some compilers don't like the comparison between int and size_t. Remove it.
The other changes are minor style cleanups.
PiperOrigin-RevId: 276333450
|
|
PiperOrigin-RevId: 276172466
|
|
PiperOrigin-RevId: 276165962
|
|
SIGKILL can be sent only by an user or OOM-killer. In both cases, we don't
need to panic.
PiperOrigin-RevId: 276150120
|
|
This change is in preparation for NDP Router Discovery where the stack will need
to handle NDP Router Advertisments.
Tests: Test that given an NDP Router Advertisement buffer (body of an ICMPv6
packet, correct values are returned by the field getters).
PiperOrigin-RevId: 276146817
|
|
This change makes sure that when an address which is already known by a NIC and
has kind = permanentExpired gets promoted to permanent, the new
PrimaryEndpointBehavior is respected.
PiperOrigin-RevId: 276136317
|
|
Right now, we send each tcp packet separately, we call one system
call per-packet. This patch allows to generate multiple tcp packets
and send them by sendmmsg.
The arguable part of this CL is a way how to handle multiple headers.
This CL adds the next field to the Prepandable buffer.
Nginx test results:
Server Software: nginx/1.15.9
Server Hostname: 10.138.0.2
Server Port: 8080
Document Path: /10m.txt
Document Length: 10485760 bytes
w/o gso:
Concurrency Level: 5
Time taken for tests: 5.491 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 18.21 [#/sec] (mean)
Time per request: 274.525 [ms] (mean)
Time per request: 54.905 [ms] (mean, across all concurrent requests)
Transfer rate: 186508.03 [Kbytes/sec] received
sw-gso:
Concurrency Level: 5
Time taken for tests: 3.852 seconds
Complete requests: 100
Failed requests: 0
Total transferred: 1048600200 bytes
HTML transferred: 1048576000 bytes
Requests per second: 25.96 [#/sec] (mean)
Time per request: 192.576 [ms] (mean)
Time per request: 38.515 [ms] (mean, across all concurrent requests)
Transfer rate: 265874.92 [Kbytes/sec] received
w/o gso:
$ ./tcp_benchmark --client --duration 15 --ideal
[SUM] 0.0-15.1 sec 2.20 GBytes 1.25 Gbits/sec
software gso:
$ tcp_benchmark --client --duration 15 --ideal --gso $((1<<16)) --swgso
[SUM] 0.0-15.1 sec 3.99 GBytes 2.26 Gbits/sec
PiperOrigin-RevId: 276112677
|
|
This change adds support for optionally auto-generating an IPv6 link-local
address based on the NIC's MAC Address on NIC enable.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that a link-local
address will not be auto-generated unless the stack is explicitly configured.
See `stack.Options` for more details. Specifically, see
`stack.Options.AutoGenIPv6LinkLocal`.
Tests: Tests to make sure that the IPb6 link-local address is only
auto-generated if the stack is specifically configured to do so. Also tests to
make sure that an auto-generated address goes through the DAD process.
PiperOrigin-RevId: 276059813
|
|
PiperOrigin-RevId: 275956240
|
|
Allow file descriptors of directories as well as AT_FDCWD.
PiperOrigin-RevId: 275929668
|
|
PiperOrigin-RevId: 275909782
|
|
Like (AF_INET, SOCK_RAW) sockets, AF_PACKET sockets require CAP_NET_RAW. With
runsc, you'll need to pass `--net-raw=true` to enable them.
Binding isn't supported yet.
PiperOrigin-RevId: 275909366
|
|
Obligatory https://xkcd.com/927
Fixes #626
|
|
PiperOrigin-RevId: 275650307
|
|
PiperOrigin-RevId: 275565958
|
|
There's no need for a linked list here.
PiperOrigin-RevId: 275565920
|
|
Fixes #763
PiperOrigin-RevId: 275563222
|
|
This change fixes several issues with the fsgofer host UDS support. Notably, it
adds support for SOCK_SEQPACKET and SOCK_DGRAM sockets [1]. It also fixes
unsafe use of unet.Socket, which could cause a panic if Socket.FD is called
when err != nil, and calls to Socket.FD with nothing to prevent the garbage
collector from destroying and closing the socket.
A set of tests is added to exercise host UDS access. This required extracting
most of the syscall test runner into a library that can be used by custom
tests.
Updates #235
Updates #1003
[1] N.B. SOCK_DGRAM sockets are likely not particularly useful, as a server can
only reply to a client that binds first. We don't allow bind, so these are
unlikely to be used.
PiperOrigin-RevId: 275558502
|
|
* Use mknod instead of open&close to create an empty file.
* Limit a number of files to (1<<16) instead of 100K.
In this case, a test set is (1, 8, 64, 512, 4K, 32K, 64K) instead of (1, 8, 64,
512, 4K, 32K, 98K). I think it is easier to compare results for 32K and 64K
than 32K and 98K. And results for 98K doesn't give us more information than for
54K.
PiperOrigin-RevId: 275552507
|
|
It is quite legal to send from the ANY address (it is required for
DHCP). I can't figure out why the broadcast address was included here,
so removing that as well.
PiperOrigin-RevId: 275541954
|
|
Otherwise we need to do a lot of system calls and cooperative_save tests work
slow.
PiperOrigin-RevId: 275536957
|
|
* Pulls common functionality (IO and locking on open) into pipe_util.go.
* Adds pipe/vfs.go, which implements a subset of vfs.FileDescriptionImpl.
A subsequent change will add support for pipes in memfs.
PiperOrigin-RevId: 275322385
|
|
NDP Neighbor Solicitations sent during Duplicate Address Detection must have an
IP hop limit of 255, as all NDP Neighbor Solicitations should have.
Test: Test that DAD messages have the IPv6 hop limit field set to 255.
PiperOrigin-RevId: 275321680
|
|
This change adds support for Duplicate Address Detection on IPv6 addresses
as defined by RFC 4862 section 5.4.
Note, this change will not break existing uses of netstack as the default
configuration for the stack options is set in such a way that DAD will not be
performed. See `stack.Options` and `stack.NDPConfigurations` for more details.
Tests: Tests to make sure that the DAD process properly resolves or fails.
That is, tests make sure that DAD resolves only if:
- No other node is performing DAD for the same address
- No other node owns the same address
PiperOrigin-RevId: 275189471
|
|
PiperOrigin-RevId: 275139066
|
|
Standard Linux kernel versions are VERSION.PATCHLEVEL.SUBLEVEL. e.g., 4.4.0,
even when the sublevel is 0. Match this standard.
PiperOrigin-RevId: 275125715
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
When any of these flags are set, all writes will trigger a subsequent fsync
call. This behavior already existed for "write-through" mounts.
O_DIRECT is treated as an alias for O_SYNC. Better support coming soon.
PiperOrigin-RevId: 275114392
|
|
These syscalls were changed in the amd64 file around the time the arm64 PR was
sent out, so their changes got lost.
Updates #63
PiperOrigin-RevId: 275114194
|
|
PiperOrigin-RevId: 275114157
|
|
These aren't actually death tests in the GUnit sense. i.e., they don't call
EXPECT_EXIT or EXPECT_DEATH.
PiperOrigin-RevId: 275099957
|
|
- Pass context.Context to OnClose().
- Pass memmap.MMapOpts to ConfigureMMap() by pointer so that implementations
can actually mutate it as required.
PiperOrigin-RevId: 274934967
|
|
Reassembly can fail due to an invalid sequence of fragments
being received. eg. Multiple fragments with same id which
claim to be the last one by setting the more flag to 0 etc.
It's safer to just drop the reassembler and increment a metric
than to panic when reassembly fails.
PiperOrigin-RevId: 274920901
|
|
...and do not populate link address cache at dispatch. This partially
reverts 313c767b0001bf6271405f1b765b60a334d6e911, which caused malformed
packets (e.g. NDP Neighbor Adverts with incorrect hop limit values) to
populate the address cache. In particular, this masked a bug that was
introduced to the Neighbor Advert generation code in
7c1587e3401a010d1865df61dbaf117c77dd062e.
PiperOrigin-RevId: 274865182
|
|
fsgofer.attachPoint.Attach has a bunch of funky special logic to create a RW
file or connect a socket rather than creating a standard control file like
localFile.Walk.
This is unecessary and error-prone, as the attach point still has to go through
Open or Connect which will properly convert the control file to something
usable. As such, switch the logic to be equivalent to a simple Walk.
Updates #235
PiperOrigin-RevId: 274827872
|
|
PiperOrigin-RevId: 274700093
|
|
PiperOrigin-RevId: 274675428
|
|
PiperOrigin-RevId: 274673485
|
|
PiperOrigin-RevId: 274672346
|
|
PiperOrigin-RevId: 274638272
|
|
|
|
This allows for peeking at the length of the next message on a netlink socket
without pulling it off the socket's buffer/queue, allowing tools like 'ip' to
work.
This CL also fixes an issue where dump_done_errno was not included in the
NLMSG_DONE messages payload.
Issue #769
PiperOrigin-RevId: 274068637
|
|
Strengthen the header.IPv4.IsValid check to correctly check
for IHL/TotalLength fields. Also add a check to make sure
fragmentOffsets + size of the fragment do not cause a wrap
around for the end of the fragment.
PiperOrigin-RevId: 274049313
|
|
PiperOrigin-RevId: 274042343
|
|
|
|
rt_sigreturn is required for signal handling (e.g., SIGSEGV for nil-pointer
dereference). Before this, nil-pointer dereferences cause a syscall violation
instead of a panic.
PiperOrigin-RevId: 274028767
|
|
The signalfd descriptors otherwise always show as available. This can lead
programs to spin, assuming they are looking to see what signals are pending.
Updates #139
PiperOrigin-RevId: 274017890
|
|
PiperOrigin-RevId: 274011064
|