| Age | Commit message (Collapse) | Author |
|---|
|
|
|
We can reuse information about whether a whiteout exists on a given file path
from stepLocked when creating a file at that path. This helps save an Unlink
call to the upper filesystem if the whiteout does NOT exist (common case).
Plumbs this information from lookupLocked() -> getChildLocked() -> stepLocked().
This also helped save a Lookup in RenameAt().
Fixes #1199
PiperOrigin-RevId: 341105351
|
|
|
|
The root dentry was not created through Inode.Lookup, so we should not
release a reference even if inode.Keep() is true.
PiperOrigin-RevId: 341103220
|
|
|
|
Writes to pipes of size < PIPE_BUF are guaranteed to be atomic, so writes
larger than that will return EAGAIN if the pipe has capacity < PIPE_BUF.
Writes to eventfds will return EAGAIN if the write would cause the eventfd
value to go over the max.
In both such cases, calling Ready() on the FD will return true (because it is
possible to write), but specific kinds of writes will in fact return EAGAIN.
This CL fixes an infinite loop in splice and sendfile (VFS1 and VFS2) by
forcing skipping the readiness check for the outfile in send, splice, and tee.
PiperOrigin-RevId: 341102260
|
|
|
|
Port 0 is not meant to identify any remote port so attempting to send
a packet to it should return an error.
PiperOrigin-RevId: 341009528
|
|
|
|
PiperOrigin-RevId: 341001328
|
|
|
|
This change adds a Subnet() method to AddressableEndpoint so that we
can avoid repeated calls to AddressableEndpoint.AddressWithPrefix().Subnet().
Updates #231
PiperOrigin-RevId: 340969877
|
|
|
|
Due to a type doDestroyNotStartedTest was being tested
2x instead of doDestroyStartingTest.
PiperOrigin-RevId: 340969797
|
|
|
|
This was causing gvisor-containerd-shim to crash because the command
suceeded, but there was no stat present.
PiperOrigin-RevId: 340964921
|
|
|
|
This will allow us to run massive runtime tests live java to run in parallel
across multiple jobs.
PiperOrigin-RevId: 340956246
|
|
|
|
|
|
* Remove stack.Route from incoming packet path.
There is no need to pass around a stack.Route during the incoming path
of a packet. Instead, pass around the packet's link/network layer
information in the packet buffer since all layers may need this
information.
* Support address bound and outgoing packet NIC in routes.
When forwarding is enabled, the source address of a packet may be bound
to a different interface than the outgoing interface. This change
updates stack.Route to hold both NICs so that one can be used to write
packets while the other is used to check if the route's bound address
is valid. Note, we need to hold the address's interface so we can check
if the address is a spoofed address.
* Introduce the concept of a local route.
Local routes are routes where the packet never needs to leave the stack;
the destination is stack-local. We can now route between interfaces
within a stack if the packet never needs to leave the stack, even when
forwarding is disabled.
* Always obtain a route from the stack before sending a packet.
If a packet needs to be sent in response to an incoming packet, a route
must be obtained from the stack to ensure the stack is configured to
send packets to the packet's source from the packet's destination.
* Enable spoofing if a stack may send packets from unowned addresses.
This change required changes to some netgophers since previously,
promiscuous mode was enough to let the netstack respond to all
incoming packets regardless of the packet's destination address. Now
that a stack.Route is not held for each incoming packet, finding a route
may fail with local addresses we don't own but accepted packets for
while in promiscuous mode. Since we also want to be able to send from
any address (in response the received promiscuous mode packets), we need
to enable spoofing.
* Skip transport layer checksum checks for locally generated packets.
If a packet is locally generated, the stack can safely assume that no
errors were introduced while being locally routed since the packet is
never sent out the wire.
Some bugs fixed:
- transport layer checksum was never calculated after NAT.
- handleLocal didn't handle routing across interfaces.
- stack didn't support forwarding across interfaces.
- always consult the routing table before creating an endpoint.
Updates #4688
Fixes #3906
PiperOrigin-RevId: 340943442
|
|
PiperOrigin-RevId: 340941898
|
|
|
|
When OOM score adjustment needs to be set, all the containers need to be
loaded to find all containers that belong to the sandbox. However, each
load signals the container to ensure it is still alive. OOM score
adjustment is set during creation and deletion of every container, generating
a flood of signals to all containers. The fix removes the signal check
when it's not needed.
There is also a race fetching OOM score adjustment value from the parent when
the sandbox exits at the same time (the time it took to signal containers above
made this window quite large). The fix is to store the original value
in the sandbox state file and use it when the value needs to be restored.
Also add more logging and made the existing ones more consistent to help with
debugging.
PiperOrigin-RevId: 340940799
|
|
|
|
PiperOrigin-RevId: 340925131
|
|
|
|
- Disable saving in tests that wait for EINTR.
- Do not execute async-signal-unsafe code after fork() (see fork(2)'s manpage,
"After a fork in a multithreaded program ...")
- Check for errors returned by semctl(GETZCNT).
PiperOrigin-RevId: 340901353
|
|
|
|
This was occasionally causing tests to get stuck due to races with the save
process, during which the same mutex is acquired.
PiperOrigin-RevId: 340789616
|
|
|
|
PiperOrigin-RevId: 340763455
|
|
|
|
The file size can now also be verified. Also, since we are zero-padding
the last block of the data, we cannot differentiate the cases between
zero-padded block from the blocks that are ends with zeroes. With the
size included this can be addressed, as those cases would have different
file size.
PiperOrigin-RevId: 340695510
|
|
|
|
Updates #2785
PiperOrigin-RevId: 340566576
|
|
|
|
PiperOrigin-RevId: 340536306
|
|
|
|
The waits-for relationship between an epoll instance and an inotify fd should
be restored.
This fixes flaky inotify vfs2 tests.
PiperOrigin-RevId: 340531367
|
|
|
|
The default pipe size already matched linux, and is unchanged.
Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We
were plumbing usermem.PageSize everywhere, so this is no functional change.
PiperOrigin-RevId: 340497006
|
|
|
|
PiperOrigin-RevId: 340484823
|
|
|
|
Without releasing the mutex, operations on the endpoint following a
nonblocking connect will not make progress until connect is complete.
PiperOrigin-RevId: 340467654
|
|
|
|
Use an sErr injection to trigger sigbus when we receive EFAULT from the
run ioctl.
After applying this patch, mmap_test_runsc_kvm will be passed on
Arm64.
Signed-off-by: Bin Lu <bin.lu@arm.com>
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4542 from lubinszARM:pr_kvm_mmap_1 f81bd42466d1d60a581e5fb34de18b78878c68c1
PiperOrigin-RevId: 340461239
|
|
|
|
PiperOrigin-RevId: 340389884
|
