Age | Commit message (Collapse) | Author |
|
We're currently on 1.13, which can cause build issues with code targeting later
versions.
PiperOrigin-RevId: 385029528
|
|
TCP is fully supported. As with SO_RCVBUF, other transport protocols perform
no-ops per DefaultSocketOptionsHandler.OnSetReceiveBufferSize.
PiperOrigin-RevId: 385023239
|
|
PiperOrigin-RevId: 385019550
|
|
PiperOrigin-RevId: 384823097
|
|
PiperOrigin-RevId: 384796852
|
|
PiperOrigin-RevId: 384776517
|
|
Tested via:
```
bazel test \
//test/syscalls:socket_ipv4_udp_unbound_loopback_nogotsan_test_runsc_ptrace
--runs_per_test=2000
```
PiperOrigin-RevId: 384773477
|
|
|
|
PiperOrigin-RevId: 384586164
|
|
Remove the hack in gVisor vfs that allows verity to bypass the O_PATH
check, since ioctl is not allowed on fds opened with O_PATH in linux.
Verity still opens the lowerFD with O_PATH to open it as a symlink, but
the API no longer expects O_PATH to open a fd to be verity enabled.
Now only O_FOLLOW should be specified when opening and enabling verity
features.
PiperOrigin-RevId: 384567833
|
|
It was confusing to find functions relating to root and non-root
containers. Replace "non-root" and "subcontainer" and make naming
consistent in Sandbox and controller.
PiperOrigin-RevId: 384512518
|
|
Previously, two calls to set the send or receive buffer size could have raced
and left state wherein:
- The actual size depended on one call
- The value returned by getsockopt() depended on the other
PiperOrigin-RevId: 384508720
|
|
Before this change, transmission of the first router solicitation races
with the adding of an IPv6 link-local address. This change creates the
NIC in the disabled state and is only enabled after the address is added
(if required) to avoid this race.
PiperOrigin-RevId: 384493553
|
|
- Keeps Linux-specific behavior out of //pkg/tcpip
- Makes it clearer that clamping is done only for setsockopt calls from users
- Removes code duplication
PiperOrigin-RevId: 384389809
|
|
Kernfs provides an internal mechanism to defer calls to `DecRef()` because
on the last reference `Filesystem.mu` must be held and most places that
need to call `DecRef()` are inside the lock. The same can be true for
filesystems that extend kernfs. procfs needs to look up files and `DecRef()`
them inside the `kernfs.Filesystem.mu`. If the files happen to be procfs
files, it can deadlock trying to decrement if it's the last reference.
This change extends the mechanism to external callers to defer DecRefs
to `vfs.FileDescription` and `vfs.VirtualDentries`.
PiperOrigin-RevId: 384361647
|
|
Instead, roll the output scraping into the main runner. Pass a perf flag to
the runner in order to control leak checking, apply tags via the macro and
appropriately disable logging. This may be removed in the future.
PiperOrigin-RevId: 384348035
|
|
Set stdio ownership based on the container's user to ensure the
user can open/read/write to/from stdios.
1. stdios in the host are changed to have the owner be the same
uid/gid of the process running the sandbox. This ensures that the
sandbox has full control over it.
2. stdios owner owner inside the sandbox is changed to match the
container's user to give access inside the container and make it
behave the same as runc.
Fixes #6180
PiperOrigin-RevId: 384347009
|
|
PiperOrigin-RevId: 384344990
|
|
Update the following from syserror to the linuxerr equivalent:
EEXIST
EFAULT
ENOTDIR
ENOTTY
EOPNOTSUPP
ERANGE
ESRCH
PiperOrigin-RevId: 384329869
|
|
PiperOrigin-RevId: 384305599
|
|
PiperOrigin-RevId: 384295543
|
|
Remove "partial write" handling as io.Writer.Write is not permitted to
return a nil error on partial writes, and this code was already
panicking on non-nil errors.
PiperOrigin-RevId: 384289970
|
|
PiperOrigin-RevId: 384257460
|
|
Go 1.17 adds a new register-based calling convention. While transparent for
most applications, the KVM platform needs special work in a few cases.
First of all, we need the actual address of some assembly functions, rather
than the address of a wrapper. See http://gvisor.dev/pr/5832 for complete
discussion of this.
More relevant to this CL is that ABI0-to-ABIInternal wrappers (i.e., calls from
assembly to Go) access the G via FS_BASE. The KVM quite fast-and-loose about
the Go environment, often calling into (nosplit) Go functions with
uninitialized FS_BASE.
That will no longer work in Go 1.17, so this CL changes the platform to
consistently restore FS_BASE before calling into Go code.
This CL does not affect arm64 code. Go 1.17 does not support the register-based
calling convention for arm64 (it will come in 1.18), but arm64 also does not
use a non-standard register like FS_BASE for TLS, so it may not require any
changes.
PiperOrigin-RevId: 384234305
|
|
PiperOrigin-RevId: 383940663
|
|
- LockOSThread() around prctl(PR_SET_NO_NEW_PRIVS) => seccomp(). go:nosplit
"mostly" prevents async preemption, but IIUC preemption is still permitted
during function prologues:
funcpctab "".seccomp [valfunc=pctopcdata]
0 -1 00000 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) TEXT "".seccomp(SB), NOSPLIT|ABIInternal, $72-32
0 00000 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) TEXT "".seccomp(SB), NOSPLIT|ABIInternal, $72-32
0 -1 00000 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) SUBQ $72, SP
4 00004 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) MOVQ BP, 64(SP)
9 00009 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) LEAQ 64(SP), BP
e 00014 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) FUNCDATA $0, gclocals·ba30782f8935b28ed1adaec603e72627(SB)
e 00014 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) FUNCDATA $1, gclocals·663f8c6bfa83aa777198789ce63d9ab4(SB)
e 00014 (gvisor/pkg/seccomp/seccomp_unsafe.go:110) FUNCDATA $2, "".seccomp.stkobj(SB)
e 00014 (gvisor/pkg/seccomp/seccomp_unsafe.go:111) PCDATA $0, $-2
e -2 00014 (gvisor/pkg/seccomp/seccomp_unsafe.go:111) MOVQ "".ptr+88(SP), AX
(-1 is objabi.PCDATA_UnsafePointSafe and -2 is objabi.PCDATA_UnsafePointUnsafe,
from Go's cmd/internal/objabi.)
- Handle non-errno failures from seccomp() with SECCOMP_FILTER_FLAG_TSYNC.
PiperOrigin-RevId: 383757580
|
|
PiperOrigin-RevId: 383750666
|
|
PiperOrigin-RevId: 383705129
|
|
PiperOrigin-RevId: 383689096
|
|
PiperOrigin-RevId: 383684320
|
|
Commit 16b751b6c610ec2c5a913cb8a818e9239ee7da71 introduced a bug where writes of
zero size would end up queueing a zero sized segment which will cause the
sandbox to panic when trying to send a zero sized segment(e.g. after an RTO) as
netstack asserts that the all non FIN segments have size > 0.
This change adds the check for a zero sized payload back to avoid queueing
such segments. The associated test panics without the fix and passes with it.
PiperOrigin-RevId: 383677884
|
|
PiperOrigin-RevId: 383481745
|
|
PiperOrigin-RevId: 383472507
|
|
PiperOrigin-RevId: 383426091
|
|
This test single handedly causes the syscalls:socket_inet_loopback_test test
variants to take more than an hour to run on some of our testing environments.
Reduce how aggressively this test tries to replicate a fixed flake. This is a
regression test.
PiperOrigin-RevId: 382849039
|
|
PiperOrigin-RevId: 382845950
|
|
PiperOrigin-RevId: 382788878
|
|
More-specific route discovery allows hosts to pick a more appropriate
router for off-link destinations.
Fixes #6172.
PiperOrigin-RevId: 382779880
|
|
This change makes the checklocks analyzer considerable more powerful, adding:
* The ability to traverse complex structures, e.g. to have multiple nested
fields as part of the annotation.
* The ability to resolve simple anonymous functions and closures, and perform
lock analysis across these invocations. This does not apply to closures that
are passed elsewhere, since it is not possible to know the context in which
they might be invoked.
* The ability to annotate return values in addition to receivers and other
parameters, with the same complex structures noted above.
* Ignoring locking semantics for "fresh" objects, i.e. objects that are
allocated in the local frame (typically a new-style function).
* Sanity checking of locking state across block transitions and returns, to
ensure that no unexpected locks are held.
Note that initially, most of these findings are excluded by a comprehensive
nogo.yaml. The findings that are included are fundamental lock violations.
The changes here should be relatively low risk, minor refactorings to either
include necessary annotations to simplify the code structure (in general
removing closures in favor of methods) so that the analyzer can be easily
track the lock state.
This change additional includes two changes to nogo itself:
* Sanity checking of all types to ensure that the binary and ast-derived
types have a consistent objectpath, to prevent the bug above from occurring
silently (and causing much confusion). This also requires a trick in
order to ensure that serialized facts are consumable downstream. This can
be removed with https://go-review.googlesource.com/c/tools/+/331789 merged.
* A minor refactoring to isolation the objdump settings in its own package.
This was originally used to implement the sanity check above, but this
information is now being passed another way. The minor refactor is preserved
however, since it cleans up the code slightly and is minimal risk.
PiperOrigin-RevId: 382613300
|
|
In gVisor today its possible that when trying to bind a TCP socket
w/ SO_REUSEADDR specified and requesting the kernel pick a port by
setting port to zero can result in a previously bound port being
returned. This behaviour is incorrect as the user is clearly requesting
a free port. The behaviour is fine when the user explicity specifies
a port.
This change now checks if the user specified a port when making a port
reservation for a TCP port and only returns unbound ports even if
SO_REUSEADDR was specified.
Fixes #6209
PiperOrigin-RevId: 382607638
|
|
PiperOrigin-RevId: 382603592
|
|
Update/remove most syserror errors to linuxerr equivalents. For list
of removed errors, see //pkg/syserror/syserror.go.
PiperOrigin-RevId: 382574582
|
|
PiperOrigin-RevId: 382427879
|
|
Update all instances of the above errors to the faster linuxerr implementation.
With the temporary linuxerr.Equals(), no logical changes are made.
PiperOrigin-RevId: 382306655
|
|
This change prepares for a later change which supports the NDP
Route Information option to discover more-specific routes, as
per RFC 4191.
Updates #6172.
PiperOrigin-RevId: 382225812
|
|
PiperOrigin-RevId: 382202462
|
|
The unordered map may generate different hash due to its order. The
children map needs to be sorted each time before hashing to avoid false
verification failure due to the map.
Store the sorted children map in verity dentry to avoid sorting it each
time verification happens.
Also serialize the whole VerityDescriptor struct to hash now that the
map is removed from it.
PiperOrigin-RevId: 382201560
|
|
PiperOrigin-RevId: 382194711
|
|
Remove three syserror entries duplicated in linuxerr. Because of the
linuxerr.Equals method, this is a mere change of return values from
syserror to linuxerr definitions.
Done with only these three errnos as CLs removing all grow to a significantly
large size.
PiperOrigin-RevId: 382173835
|
|
The PID files are not used after they are read, so there is
no point in keeping them around until the shim is deleted.
Updates #6225
PiperOrigin-RevId: 382169916
|