Age | Commit message (Collapse) | Author |
|
As documented for gofer.dentry.hostFD.
PiperOrigin-RevId: 329372319
|
|
These mostly guard linux-only headers; check for linux instead.
PiperOrigin-RevId: 329362762
|
|
Implement walk directories in gvisor verity file system. For each step,
the child dentry is verified against a verified parent root hash.
PiperOrigin-RevId: 329358747
|
|
PiperOrigin-RevId: 329349158
|
|
Some syscall tests, namely uname_test_* modify the host and domain
name, which modifies the execution environment and can have unintended
consequences on other tests. For example, modifying the hostname
causes some networking tests to fail DNS lookups. Run all syscall
tests in their own uts namespaces to isolate these changes.
PiperOrigin-RevId: 329348127
|
|
PiperOrigin-RevId: 329042549
|
|
PiperOrigin-RevId: 329036994
|
|
Currently the logs produce
TestOne: packetimpact_test.go:182: listing devices on ... container: process terminated with status: 126
which is not actionable; presumably the `ip` command output is interesting.
PiperOrigin-RevId: 329032105
|
|
An earlier change considered the loopback bound to all addresses in an
assigned subnet. This should have only be done for IPv4 to maintain
compatability with Linux:
```
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 2001:db8::1
PING 2001:db8::1(2001:db8::1) 56 data bytes
^C
--- 2001:db8::1 ping statistics ---
4 packets transmitted, 0 received, 100% packet loss, time 3062ms
$ ping 2001:db8::2
PING 2001:db8::2(2001:db8::2) 56 data bytes
^C
--- 2001:db8::2 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2030ms
$ sudo ip addr add 2001:db8::1/64 dev lo
$ ping 2001:db8::1
PING 2001:db8::1(2001:db8::1) 56 data bytes
64 bytes from 2001:db8::1: icmp_seq=1 ttl=64 time=0.055 ms
64 bytes from 2001:db8::1: icmp_seq=2 ttl=64 time=0.074 ms
64 bytes from 2001:db8::1: icmp_seq=3 ttl=64 time=0.073 ms
64 bytes from 2001:db8::1: icmp_seq=4 ttl=64 time=0.071 ms
^C
--- 2001:db8::1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3075ms
rtt min/avg/max/mdev = 0.055/0.068/0.074/0.007 ms
$ ping 2001:db8::2
PING 2001:db8::2(2001:db8::2) 56 data bytes
From 2001:db8::1 icmp_seq=1 Destination unreachable: No route
From 2001:db8::1 icmp_seq=2 Destination unreachable: No route
From 2001:db8::1 icmp_seq=3 Destination unreachable: No route
From 2001:db8::1 icmp_seq=4 Destination unreachable: No route
^C
--- 2001:db8::2 ping statistics ---
4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 3070ms
```
Test: integration_test.TestLoopbackAcceptAllInSubnet
PiperOrigin-RevId: 329011566
|
|
This mainly involved enabling kernfs' client filesystems to provide a
StatFS implementation.
Fixes #3411, #3515.
PiperOrigin-RevId: 329009864
|
|
The existing implementation for NetworkProtocol.{Set}Option take
arguments of an empty interface type which all types (implicitly)
implement; any type may be passed to the functions.
This change introduces marker interfaces for network protocol options
that may be set or queried which network protocol option types implement
to ensure that invalid types are caught at compile time. Different
interfaces are used to allow the compiler to enforce read-only or
set-only socket options.
PiperOrigin-RevId: 328980359
|
|
Also, add corresponding EOF tests for splice/sendfile.
Discovered by syzkaller.
PiperOrigin-RevId: 328975990
|
|
Reported-by: syzbot+074ec22c42305725b79f@syzkaller.appspotmail.com
PiperOrigin-RevId: 328963899
|
|
Updates #3780.
PiperOrigin-RevId: 328922573
|
|
This change was already done as of
https://github.com/google/gvisor/commit/1736b2208f but
https://github.com/google/gvisor/commit/a174aa7597 conflicted with that
change and it was missed in reviews.
This change fixes the conflict.
PiperOrigin-RevId: 328920372
|
|
PiperOrigin-RevId: 328863725
|
|
Fixes *.sh Java runtime tests, where splice()-ing from a pipe to /dev/zero
would not actually empty the pipe.
There was no guarantee that the data would actually be consumed on a splice
operation unless the output file's implementation of Write/PWrite actually
called VFSPipeFD.CopyIn. Now, whatever bytes are "written" are consumed
regardless of whether CopyIn is called or not.
Furthermore, the number of bytes in the IOSequence for reads is now capped at
the amount of data actually available. Before, splicing to /dev/zero would
always return the requested splice size without taking the actual available
data into account.
This change also refactors the case where an input file is spliced into an
output pipe so that it follows a similar pattern, which is arguably cleaner
anyway.
Updates #3576.
PiperOrigin-RevId: 328843954
|
|
PiperOrigin-RevId: 328843560
|
|
PiperOrigin-RevId: 328839759
|
|
The existing implementation for {G,S}etSockOpt take arguments of an
empty interface type which all types (implicitly) implement; any
type may be passed to the functions.
This change introduces marker interfaces for socket options that may be
set or queried which socket option types implement to ensure that invalid
types are caught at compile time. Different interfaces are used to allow
the compiler to enforce read-only or set-only socket options.
Fixes #3714.
RELNOTES: n/a
PiperOrigin-RevId: 328832161
|
|
Added a few tests for write(2) and pwrite(2)
1. Regular Files
For write(2)
- write zero bytes should not move the offset
- write non-zero bytes should increment the offset the exact amount
- write non-zero bytes after a lseek() should move the offset the exact amount after the seek
- write non-zero bytes with O_APPEND should move the offset the exact amount after original EOF
For pwrite(2), offset is not affected when
- pwrite zero bytes
- pwrite non-zero bytes
For EOF, added a test asserting the EOF (indicated by lseek(SEEK_END)) is updated properly after writing non-zero bytes
2. Symlink
Added one pwite64() call for symlink that is written as a counterpart of the existing test using pread64()
|
|
BadSocketPair test will return several errnos (EPREM, ESOCKTNOSUPPORT,
EAFNOSUPPORT) meaning the test is just too specific. Checking the syscall
fails is appropriate.
PiperOrigin-RevId: 328813071
|
|
...while we figure out of we want to consider the loopback interface
bound to all IPs in an assigned IPv6 subnet, or not (to maintain
compatibility with Linux).
PiperOrigin-RevId: 328807974
|
|
In an upcoming CL, socket option types are made to implement a marker
interface with pointer receivers. Since this results in calling methods
of an interface with a pointer, we incur an allocation when attempting
to get an Endpoint's last error with the current implementation.
When calling the method of an interface, the compiler is unable to
determine what the interface implementation does with the pointer
(since calling a method on an interface uses virtual dispatch at runtime
so the compiler does not know what the interface method will do) so it
allocates on the heap to be safe incase an implementation continues to
hold the pointer after the functioon returns (the reference escapes the
scope of the object).
In the example below, the compiler does not know what b.foo does with
the reference to a it allocates a on the heap as the reference to a may
escape the scope of a.
```
var a int
var b someInterface
b.foo(&a)
```
This change removes the opportunity for that allocation.
RELNOTES: n/a
PiperOrigin-RevId: 328796559
|
|
More implementation+testing to follow.
#3549.
PiperOrigin-RevId: 328770160
|
|
ioctl calls with TIOCSCTTY fail if the calling process already has a
controlling terminal, which occurs on a 5.4 kernel like our Ubuntu 18 CI.
Thus, run tests calling ioctl TTOCSCTTY in clean subprocess.
Also, while we're here, switch out non-inclusive master/slave for main/replica.
PiperOrigin-RevId: 328756598
|
|
Use reflection and tags to provide automatic conversion from
Config to flags. This makes adding new flags less error-prone,
skips flags using default values (easier to read), and makes
tests correctly use default flag values for test Configs.
Updates #3494
PiperOrigin-RevId: 328662070
|
|
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
|
|
This immediately revealed an escape analysis violation (!), where
the sync.Map was being used in a context that escapes were not
allowed. This is a relatively minor fix and is included.
PiperOrigin-RevId: 328611237
|
|
PiperOrigin-RevId: 328583461
|
|
PiperOrigin-RevId: 328579755
|
|
This is needed to support the overlay opaque attribute.
PiperOrigin-RevId: 328552985
|
|
PiperOrigin-RevId: 328467152
|
|
This uses the refs_vfs2 template in vfs2 as well as objects common to vfs1 and
vfs2. Note that vfs1-only refcounts are not replaced, since vfs1 will be deleted
soon anyway.
The following structs now use the new tool, with leak check enabled:
devpts:rootInode
fuse:inode
kernfs:Dentry
kernfs:dir
kernfs:readonlyDir
kernfs:StaticDirectory
proc:fdDirInode
proc:fdInfoDirInode
proc:subtasksInode
proc:taskInode
proc:tasksInode
vfs:FileDescription
vfs:MountNamespace
vfs:Filesystem
sys:dir
kernel:FSContext
kernel:ProcessGroup
kernel:Session
shm:Shm
mm:aioMappable
mm:SpecialMappable
transport:queue
And the following use the template, but because they currently are not leak
checked, a TODO is left instead of enabling leak check in this patch:
kernel:FDTable
tun:tunEndpoint
Updates #1486.
PiperOrigin-RevId: 328460377
|
|
This does not implement accepting or enforcing any size limit, which will be
more complex and has performance implications; it just returns a fixed non-zero
size.
Updates #1936
PiperOrigin-RevId: 328428588
|
|
In Linux, a kernel configuration is set that compiles the kernel with a
custom function that is called at the beginning of every basic block, which
updates the memory-mapped coverage information. The Go coverage tool does not
allow us to inject arbitrary instructions into basic blocks, but it does
provide data that we can convert to a kcov-like format and transfer them to
userspace through a memory mapping.
Note that this is not a strict implementation of kcov, which is especially
tricky to do because we do not have the same coverage tools available in Go
that that are available for the actual Linux kernel. In Linux, a kernel
configuration is set that compiles the kernel with a custom function that is
called at the beginning of every basic block to write program counters to the
kcov memory mapping. In Go, however, coverage tools only give us a count of
basic blocks as they are executed. Every time we return to userspace, we
collect the coverage information and write out PCs for each block that was
executed, providing userspace with the illusion that the kcov data is always
up to date. For convenience, we also generate a unique synthetic PC for each
block instead of using actual PCs. Finally, we do not provide thread-specific
coverage data (each kcov instance only contains PCs executed by the thread
owning it); instead, we will supply data for any file specified by --
instrumentation_filter.
Also, fix issue in nogo that was causing pkg/coverage:coverage_nogo
compilation to fail.
PiperOrigin-RevId: 328426526
|
|
Test:
- TestV4UnknownDestination
- TestV6UnknownDestination
PiperOrigin-RevId: 328424137
|
|
PiperOrigin-RevId: 328415633
|
|
PiperOrigin-RevId: 328410399
|
|
PiperOrigin-RevId: 328410065
|
|
The actual values used for this field in Netstack are actually EtherType values
of the protocol in an Ethernet frame. Eg. header.IPv4ProtocolNumber is 0x0800
and not the number of the IPv4 Protocol Number itself which is 4. Similarly
header.IPv6ProtocolNumber is set to 0x86DD whereas the IPv6 protocol number is
41.
See:
- https://www.iana.org/assignments/ieee-802-numbers/ieee-802-numbers.xhtml (For EtherType)
- https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml (For ProtocolNumbers)
PiperOrigin-RevId: 328407293
|
|
PiperOrigin-RevId: 328403914
|
|
iptables sockopts were kludged into an unnecessary check, this properly
relegates them to the {get,set}SockOptIP functions.
PiperOrigin-RevId: 328395135
|
|
The debian rules are also moved to the top-level, since they
apply to binaries outside the //runsc directory.
Fixes #3665
PiperOrigin-RevId: 328379709
|
|
Updates #3374
PiperOrigin-RevId: 328378700
|
|
PiperOrigin-RevId: 328374775
|
|
This change adds an option to replace the current implementation of ARP through
linkAddrCache, with an implementation of NUD through neighborCache. Switching
to using NUD for both ARP and NDP is beneficial for the reasons described by
RFC 4861 Section 3.1:
"[Using NUD] significantly improves the robustness of packet delivery in the
presence of failing routers, partially failing or partitioned links, or nodes
that change their link-layer addresses. For instance, mobile nodes can move
off-link without losing any connectivity due to stale ARP caches."
"Unlike ARP, Neighbor Unreachability Detection detects half-link failures and
avoids sending traffic to neighbors with which two-way connectivity is
absent."
Along with these changes exposes the API for querying and operating the
neighbor cache. Operations include:
- Create a static entry
- List all entries
- Delete all entries
- Remove an entry by address
This also exposes the API to change the NUD protocol constants on a per-NIC
basis to allow Neighbor Discovery to operate over links with widely varying
performance characteristics. See [RFC 4861 Section 10][1] for the list of
constants.
Finally, an API for subscribing to NUD state changes is exposed through
NUDDispatcher. See [RFC 4861 Appendix C][3] for the list of edges.
Tests:
pkg/tcpip/network/arp:arp_test
+ TestDirectRequest
pkg/tcpip/network/ipv6:ipv6_test
+ TestLinkResolution
+ TestNDPValidation
+ TestNeighorAdvertisementWithTargetLinkLayerOption
+ TestNeighorSolicitationResponse
+ TestNeighorSolicitationWithSourceLinkLayerOption
+ TestRouterAdvertValidation
pkg/tcpip/stack:stack_test
+ TestCacheWaker
+ TestForwardingWithFakeResolver
+ TestForwardingWithFakeResolverManyPackets
+ TestForwardingWithFakeResolverManyResolutions
+ TestForwardingWithFakeResolverPartialTimeout
+ TestForwardingWithFakeResolverTwoPackets
+ TestIPv6SourceAddressSelectionScopeAndSameAddress
[1]: https://tools.ietf.org/html/rfc4861#section-10
[2]: https://tools.ietf.org/html/rfc4861#appendix-C
Fixes #1889
Fixes #1894
Fixes #1895
Fixes #1947
Fixes #1948
Fixes #1949
Fixes #1950
PiperOrigin-RevId: 328365034
|
|
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
|
|
These tests print disk_free_space()/disk_total_space() and expect the printed
result to be an integer (despite the fact that both the documented and returned
type is float). After cl/297213789, free/total disk space on tmpfs is
sufficiently large that PHP prints the result in scientific notation instead:
========DIFF========
012+ float(9.2233720368548E+18)
013+ float(9.2233720368548E+18)
012- float(%d)
013- float(%d)
========DONE========
FAIL disk_total_space() and disk_free_space() tests [ext/standard/tests/file/disk.phpt]
PiperOrigin-RevId: 328349906
|