summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-10-28Merge release-20201019.0-79-g22ac9b072 (automated)gVisor bot
2020-10-27Merge pull request #4587 from lnsp:stacktracegVisor bot
PiperOrigin-RevId: 339385609
2020-10-28Merge release-20201019.0-77-g93d2d37a9 (automated)gVisor bot
2020-10-27Add more cgroup unit testsFabricio Voznika
PiperOrigin-RevId: 339380431
2020-10-28Merge release-20201019.0-76-g035b1c827 (automated)gVisor bot
2020-10-27Add support for Timestamp and RecordRoute IP optionsJulian Elischer
IPv4 options extend the size of the IP header and have a basic known format. The framework can process that format without needing to know about every possible option. We can add more code to handle additional option types as we need them. Bad options or mangled option entries can result in ICMP Parameter Problem packets. The first types we support are the Timestamp option and the Record Route option, included in this change. The options are processed at several points in the packet flow within the Network stack, with slightly different requirements. The framework includes a mechanism to control this at each point. Support has been added for such points which are only present in upcoming CLs such as during packet forwarding and fragmentation. With this change, 'ping -R' and 'ping -T' work against gVisor and Fuchsia. $ ping -R 192.168.1.2 PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data. 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.990 ms NOP RR: 192.168.1.1 192.168.1.2 192.168.1.1 $ ping -T tsprespec 192.168.1.2 192.168.1.1 192.168.1.2 PING 192.168.1.2 (192.168.1.2) 56(124) bytes of data. 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=1.20 ms TS: 192.168.1.2 71486821 absolute 192.168.1.1 746 Unit tests included for generic options, Timestamp options and Record Route options. PiperOrigin-RevId: 339379076
2020-10-28Merge release-20201019.0-75-gbc91ae17f (automated)gVisor bot
2020-10-27Add SHA512 to merkle tree libraryChong Cai
PiperOrigin-RevId: 339377254
2020-10-28Merge release-20201019.0-74-g24c33de74 (automated)gVisor bot
2020-10-27Wake up any waiters on an ICMP error on UDP socket.Bhasker Hariharan
This change wakes up any waiters when we receive an ICMP port unreachable control packet on an UDP socket as well as sets waiter.EventErr in the result returned by Readiness() when e.lastError is not nil. The latter is required where an epoll()/poll() is done after the error is already handled since we will never notify again in such cases. PiperOrigin-RevId: 339370469
2020-10-28Merge release-20201019.0-73-g1c2836da3 (automated)gVisor bot
2020-10-27Implement /proc/[pid]/memLennart
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`. @majek COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43 PiperOrigin-RevId: 339369629
2020-10-28Merge release-20201019.0-72-g013d79d8e (automated)gVisor bot
2020-10-27Merge pull request #4420 from workato:dev-optionsgVisor bot
PiperOrigin-RevId: 339363816
2020-10-27Merge release-20201019.0-70-g4d9066d1d (automated)gVisor bot
2020-10-27Pass NeighborEntry in NUD callbacksTamir Duberstein
...instead of passing its fields piecemeal. PiperOrigin-RevId: 339345899
2020-10-27Merge release-20201019.0-69-g6d50185e7 (automated)gVisor bot
2020-10-27Assign VFS2 overlay device numbers based on layer device numbers.Jamie Liu
In VFS1's overlayfs, files use the device and inode number of the lower layer inode if one exists, and the upper layer inode otherwise. The former behavior is inefficient (requiring lower layer lookups even if the file exists and is otherwise wholly determined by the upper layer), and somewhat dangerous if the lower layer is also observable (since both the overlay and lower layer file will have the same device and inode numbers and thus appear to be the same file, despite being behaviorally different). VFS2 overlayfs imitates Linux overlayfs (in its default configuration) instead; it always uses the inode number from the originating layer, but synthesizes a unique device number for directories and another device number for non-directory files that have not been copied-up. As it turns out, the latter is insufficient (in VFS2, and possibly Linux as well), because a given layer may include files with different device numbers. If two distinct files on such a layer have device number X and Y respectively, but share inode number Z, then the overlay will map both files to some private device number X' and inode number Z, potentially confusing applications. Fix this by assigning synthetic device numbers based on the lower layer's device number, rather than the lower layer's vfs.Filesystem. PiperOrigin-RevId: 339300341
2020-10-27Merge release-20201019.0-68-g59e2c9f16 (automated)gVisor bot
2020-10-27Add basic address deletion to netlinkIan Lewis
Updates #3921 PiperOrigin-RevId: 339195417
2020-10-27Merge release-20201019.0-67-gef9378711 (automated)gVisor bot
2020-10-26Fix platforms blog post permalinkIan Lewis
PiperOrigin-RevId: 339182848
2020-10-27Merge release-20201019.0-66-g3bb5f7164 (automated)gVisor bot
2020-10-26Update latest install docs to install containerd shimIan Lewis
PiperOrigin-RevId: 339182137
2020-10-27Merge release-20201019.0-65-gfacb2fb9c (automated)gVisor bot
2020-10-26Implement command IPC_STAT for semctl.Jing Chen
PiperOrigin-RevId: 339166854
2020-10-26Allow overriding mount options for /dev and /dev/ptsKonstantin Baranov
This is useful to optionally set /dev ro,noexec. Treat /dev and /dev/pts the same as /proc and /sys. Make sure the Type is right though. Many config.json snippets on the Internet suggest /dev is tmpfs, not devtmpfs.
2020-10-26Merge release-20201019.0-64-g528bc3802 (automated)gVisor bot
2020-10-26Add verity tests for deleted/renamed casesChong Cai
Also change verity test to use a context with an active task. This is required to delete/rename the file in the underlying file system. PiperOrigin-RevId: 339146445
2020-10-26Merge release-20201019.0-63-g652f11380 (automated)gVisor bot
2020-10-26[vfs] kernfs: Implement LRU cache for kernfs dentries.Ayush Ranjan
Much like the VFS2 gofer client, kernfs too now caches dentries. The size of the LRU cache is configurable via mount options. Have adopted the same reference semantics from gofer client dentry. Only sysfs and procfs use this LRU cache. The rest of the kernfs users (devpts, fusefs, host, pipefs, sockfs) still use the no cache approach. PiperOrigin-RevId: 339139835
2020-10-26Merge release-20201019.0-62-g0bdcee38b (automated)gVisor bot
2020-10-26Fix SCM Rights S/R reference leak.Dean Deng
Control messages collected when peeking into a socket were being leaked. PiperOrigin-RevId: 339114961
2020-10-26Merge release-20201019.0-61-g7926a9e28 (automated)gVisor bot
2020-10-26Add nogo configuration.Adin Scannell
This splits the nogo rules into a separate configuration yaml file, and allows for multiple files to be provided. Because attrs cannot be passed down to aspects, this required that all findings are propagated up the aspect Provider. This doesn't mean that any extra work must be done, just that this information must be carried through the graph, and some additional starlark complexity is required. PiperOrigin-RevId: 339076357
2020-10-26Merge release-20201019.0-60-ge2dce0460 (automated)gVisor bot
2020-10-26Add parser for open source benchmarks.Zach Koopmans
Add a parser binary for parsing files containing Benchmark output and sending data to BigQuery. PiperOrigin-RevId: 339066396
2020-10-24Merge release-20201019.0-59-g73a186353 (automated)gVisor bot
2020-10-24Implement Seek in verity fsChong Cai
PiperOrigin-RevId: 338847417
2020-10-24Merge release-20201019.0-58-g4feb5c7c2 (automated)gVisor bot
2020-10-24Add leak checking to vfs2 structures that cannot use the refs_vfs2 template.Dean Deng
Updates #1486. PiperOrigin-RevId: 338832085
2020-10-24Merge release-20201019.0-57-gbc814b01a (automated)gVisor bot
2020-10-24Merge release-20201019.0-56-g0a035a101 (automated)gVisor bot
2020-10-24Avoid excessive save/restore cycles in socket_ipv4_udp_unbound tests.Jamie Liu
PiperOrigin-RevId: 338805321
2020-10-24Send ICMP error message if IP fragment reassembly failsToshi Kikuchi
Fixes #4427, #4428 PiperOrigin-RevId: 338805047
2020-10-24Merge release-20201019.0-55-gd1e4813e0 (automated)gVisor bot
2020-10-23Internal change.Chong Cai
PiperOrigin-RevId: 338798433
2020-10-24Merge release-20201019.0-54-g54d2d927a (automated)gVisor bot
2020-10-23Direct gvisor.dev/issues to the same place as gvisor.dev/issue.Dean Deng
Also let the Github bug reviver detect both in TODOs. PiperOrigin-RevId: 338785089
2020-10-24Merge release-20201019.0-53-g8dfbec28a (automated)gVisor bot