diff options
Diffstat (limited to 'tools/run_tests.sh')
| -rwxr-xr-x | tools/run_tests.sh | 304 |
1 files changed, 0 insertions, 304 deletions
diff --git a/tools/run_tests.sh b/tools/run_tests.sh deleted file mode 100755 index 6fe80a36b..000000000 --- a/tools/run_tests.sh +++ /dev/null @@ -1,304 +0,0 @@ -#!/bin/bash - -# Copyright 2018 The gVisor Authors. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -# Fail on any error. Treat unset variables as error. Print commands as executed. -set -eux - -################### -# GLOBAL ENV VARS # -################### - -if [[ -v KOKORO_GIT_COMMIT ]] && [[ -d git/repo ]]; then - readonly WORKSPACE_DIR="${PWD}/git/repo" -elif [[ -v KOKORO_GIT_COMMIT ]] && [[ -d github/repo ]]; then - readonly WORKSPACE_DIR="${PWD}/github/repo" -else - readonly WORKSPACE_DIR="${PWD}" -fi - -# Used to configure RBE. -readonly CLOUD_PROJECT_ID="gvisor-rbe" -readonly RBE_PROJECT_ID="projects/${CLOUD_PROJECT_ID}/instances/default_instance" - -# Random runtime name to avoid collisions. -readonly RUNTIME="runsc_test_$((RANDOM))" - -# Packages that will be built and tested. -readonly BUILD_PACKAGES=("//...") -readonly TEST_PACKAGES=("//pkg/..." "//runsc/..." "//tools/...") - -####################### -# BAZEL CONFIGURATION # -####################### - -# Install the latest version of Bazel and log the version. -(which use_bazel.sh && use_bazel.sh 0.28.0) || which bazel -bazel version - -# Load the kvm module. -sudo -n -E modprobe kvm - -# General Bazel build/test flags. -BAZEL_BUILD_FLAGS=( - "--show_timestamps" - "--test_output=errors" - "--keep_going" - "--verbose_failures=true" -) - -# Bazel build/test for RBE, a super-set of BAZEL_BUILD_FLAGS. -BAZEL_BUILD_RBE_FLAGS=( - "${BAZEL_BUILD_FLAGS[@]}" - "--config=remote" - "--project_id=${CLOUD_PROJECT_ID}" - "--remote_instance_name=${RBE_PROJECT_ID}" -) -if [[ -v KOKORO_BAZEL_AUTH_CREDENTIAL ]]; then - BAZEL_BUILD_RBE_FLAGS=( - "${BAZEL_BUILD_RBE_FLAGS[@]}" - "--auth_credentials=${KOKORO_BAZEL_AUTH_CREDENTIAL}" - ) -fi - -#################### -# Helper Functions # -#################### - -sanity_checks() { - cd ${WORKSPACE_DIR} - bazel run //:gazelle -- update-repos -from_file=go.mod - git diff --exit-code WORKSPACE -} - -build_everything() { - FLAVOR="${1}" - - cd ${WORKSPACE_DIR} - bazel build \ - -c "${FLAVOR}" "${BAZEL_BUILD_RBE_FLAGS[@]}" \ - "${BUILD_PACKAGES[@]}" -} - -build_runsc_debian() { - cd ${WORKSPACE_DIR} - - # TODO(b/135475885): pkg_deb is incompatible with Python3. - # https://github.com/bazelbuild/bazel/issues/8443 - bazel build --host_force_python=py2 runsc:runsc-debian -} - -# Run simple tests runs the tests that require no special setup or -# configuration. -run_simple_tests() { - cd ${WORKSPACE_DIR} - bazel test \ - "${BAZEL_BUILD_FLAGS[@]}" \ - "${TEST_PACKAGES[@]}" -} - -install_runtime() { - cd ${WORKSPACE_DIR} - sudo -n ${WORKSPACE_DIR}/runsc/test/install.sh --runtime ${RUNTIME} -} - -install_helper() { - PACKAGE="${1}" - TAG="${2}" - GOPATH="${3}" - - # Clone the repository. - mkdir -p "${GOPATH}"/src/$(dirname "${PACKAGE}") && \ - git clone https://"${PACKAGE}" "${GOPATH}"/src/"${PACKAGE}" - - # Checkout and build the repository. - (cd "${GOPATH}"/src/"${PACKAGE}" && \ - git checkout "${TAG}" && \ - GOPATH="${GOPATH}" make && \ - sudo -n -E env GOPATH="${GOPATH}" make install) -} - -# Install dependencies for the crictl tests. -install_crictl_test_deps() { - sudo -n -E apt-get update - sudo -n -E apt-get install -y btrfs-tools libseccomp-dev - - # Install containerd & cri-tools. - GOPATH=$(mktemp -d --tmpdir gopathXXXXX) - install_helper github.com/containerd/containerd v1.2.2 "${GOPATH}" - install_helper github.com/kubernetes-sigs/cri-tools v1.11.0 "${GOPATH}" - - # Install gvisor-containerd-shim. - local latest=/tmp/gvisor-containerd-shim-latest - local shim_path=/tmp/gvisor-containerd-shim - wget --no-verbose https://storage.googleapis.com/cri-containerd-staging/gvisor-containerd-shim/latest -O ${latest} - wget --no-verbose https://storage.googleapis.com/cri-containerd-staging/gvisor-containerd-shim/gvisor-containerd-shim-$(cat ${latest}) -O ${shim_path} - chmod +x ${shim_path} - sudo -n -E mv ${shim_path} /usr/local/bin - - # Configure containerd-shim. - local shim_config_path=/etc/containerd - local shim_config_tmp_path=/tmp/gvisor-containerd-shim.toml - sudo -n -E mkdir -p ${shim_config_path} - cat > ${shim_config_tmp_path} <<-EOF - runc_shim = "/usr/local/bin/containerd-shim" - - [runsc_config] - debug = "true" - debug-log = "/tmp/runsc-logs/" - strace = "true" - file-access = "shared" -EOF - sudo mv ${shim_config_tmp_path} ${shim_config_path} - - # Configure CNI. - (cd "${GOPATH}" && sudo -n -E env PATH="${PATH}" GOPATH="${GOPATH}" \ - src/github.com/containerd/containerd/script/setup/install-cni) -} - -# Run the tests that require docker. -run_docker_tests() { - cd ${WORKSPACE_DIR} - - # Run tests with a default runtime (runc). - bazel test \ - "${BAZEL_BUILD_FLAGS[@]}" \ - --test_env=RUNSC_RUNTIME="" \ - //runsc/test/image:image_test - - # These names are used to exclude tests not supported in certain - # configuration, e.g. save/restore not supported with hostnet. - # Run runsc tests with docker that are tagged manual. - # - # The --nocache_test_results option is used here to eliminate cached results - # from the previous run for the runc runtime. - bazel test \ - "${BAZEL_BUILD_FLAGS[@]}" \ - --test_env=RUNSC_RUNTIME="${RUNTIME}" \ - --nocache_test_results \ - //runsc/test/integration:integration_test \ - //runsc/test/integration:integration_test_hostnet \ - //runsc/test/integration:integration_test_overlay \ - //runsc/test/integration:integration_test_kvm \ - //runsc/test/image:image_test \ - //runsc/test/image:image_test_overlay \ - //runsc/test/image:image_test_hostnet \ - //runsc/test/image:image_test_kvm -} - -# Run the tests that require root. -run_root_tests() { - cd ${WORKSPACE_DIR} - bazel build //runsc/test/root:root_test - local root_test=$(find -L ./bazel-bin/ -executable -type f -name root_test | grep __main__) - if [[ ! -f "${root_test}" ]]; then - echo "root_test executable not found" - exit 1 - fi - sudo -n -E RUNSC_RUNTIME="${RUNTIME}" RUNSC_EXEC=/tmp/"${RUNTIME}"/runsc ${root_test} -} - -# Run syscall unit tests. -run_syscall_tests() { - cd ${WORKSPACE_DIR} - bazel test "${BAZEL_BUILD_RBE_FLAGS[@]}" \ - --test_tag_filters=runsc_ptrace //test/syscalls/... -} - -run_runsc_do_tests() { - local runsc=$(find bazel-bin/runsc -type f -executable -name "runsc" | head -n1) - - # run runsc do without root privileges. - ${runsc} --rootless do true - ${runsc} --rootless --network=none do true - - # run runsc do with root privileges. - sudo -n -E ${runsc} do true -} - -# Find and rename all test xml and log files so that Sponge can pick them up. -# XML files must be named sponge_log.xml, and log files must be named -# sponge_log.log. We move all such files into KOKORO_ARTIFACTS_DIR, in a -# subdirectory named with the test name. -upload_test_artifacts() { - # Skip if no kokoro directory. - [[ -v KOKORO_ARTIFACTS_DIR ]] || return - - cd ${WORKSPACE_DIR} - find -L "bazel-testlogs" -name "test.xml" -o -name "test.log" -o -name "outputs.zip" | - tar --create --files-from - --transform 's/test\./sponge_log./' | - tar --extract --directory ${KOKORO_ARTIFACTS_DIR} - if [[ -d "/tmp/${RUNTIME}/logs" ]]; then - tar --create --gzip "--file=${KOKORO_ARTIFACTS_DIR}/runsc-logs.tar.gz" -C /tmp/ ${RUNTIME}/logs - fi -} - -# Finish runs in the event of an error, uploading all artifacts. -finish() { - # Grab the last exit code, we will return it. - local exit_code=${?} - upload_test_artifacts - exit ${exit_code} -} - -# Run bazel in a docker container -build_in_docker() { - cd ${WORKSPACE_DIR} - bazel clean - bazel shutdown - make - make runsc - make bazel-shutdown -} - -######## -# MAIN # -######## - -main() { - # Register finish to run at exit. - trap finish EXIT - - # Build and run the simple tests. - sanity_checks - build_everything opt - run_simple_tests - - # So far so good. Install more deps and run the integration tests. - install_runtime - install_crictl_test_deps - run_docker_tests - run_root_tests - - run_syscall_tests - run_runsc_do_tests - - build_runsc_debian - - # Build other flavors too. - build_everything dbg - - # We need to upload all the existing test logs and artifacts before shutting - # down and cleaning bazel, otherwise all test information is lost. After this - # point, we don't expect any logs or artifacts. - upload_test_artifacts - trap - EXIT - - # Run docker build tests. - build_in_docker -} - -# Kick it off. -main |