diff options
Diffstat (limited to 'test/syscalls/linux/poll.cc')
-rw-r--r-- | test/syscalls/linux/poll.cc | 294 |
1 files changed, 0 insertions, 294 deletions
diff --git a/test/syscalls/linux/poll.cc b/test/syscalls/linux/poll.cc deleted file mode 100644 index c42472474..000000000 --- a/test/syscalls/linux/poll.cc +++ /dev/null @@ -1,294 +0,0 @@ -// Copyright 2018 The gVisor Authors. -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. - -#include <poll.h> -#include <sys/resource.h> -#include <sys/socket.h> -#include <sys/types.h> - -#include <algorithm> -#include <iostream> - -#include "gtest/gtest.h" -#include "absl/synchronization/notification.h" -#include "absl/time/clock.h" -#include "absl/time/time.h" -#include "test/syscalls/linux/base_poll_test.h" -#include "test/util/eventfd_util.h" -#include "test/util/file_descriptor.h" -#include "test/util/logging.h" -#include "test/util/test_util.h" -#include "test/util/thread_util.h" - -namespace gvisor { -namespace testing { -namespace { - -class PollTest : public BasePollTest { - protected: - void SetUp() override { BasePollTest::SetUp(); } - void TearDown() override { BasePollTest::TearDown(); } -}; - -TEST_F(PollTest, InvalidFds) { - // fds is invalid because it's null, but we tell ppoll the length is non-zero. - EXPECT_THAT(poll(nullptr, 1, 1), SyscallFailsWithErrno(EFAULT)); - EXPECT_THAT(poll(nullptr, -1, 1), SyscallFailsWithErrno(EINVAL)); -} - -TEST_F(PollTest, NullFds) { - EXPECT_THAT(poll(nullptr, 0, 10), SyscallSucceeds()); -} - -TEST_F(PollTest, ZeroTimeout) { - EXPECT_THAT(poll(nullptr, 0, 0), SyscallSucceeds()); -} - -// If random S/R interrupts the poll, SIGALRM may be delivered before poll -// restarts, causing the poll to hang forever. -TEST_F(PollTest, NegativeTimeout_NoRandomSave) { - // Negative timeout mean wait forever so set a timer. - SetTimer(absl::Milliseconds(100)); - EXPECT_THAT(poll(nullptr, 0, -1), SyscallFailsWithErrno(EINTR)); - EXPECT_TRUE(TimerFired()); -} - -TEST_F(PollTest, NonBlockingEventPOLLIN) { - // Create a pipe. - int fds[2]; - ASSERT_THAT(pipe(fds), SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Write some data to the pipe. - char s[] = "foo\n"; - ASSERT_THAT(WriteFd(fd1.get(), s, strlen(s) + 1), SyscallSucceeds()); - - // Poll on the reader fd with POLLIN event. - struct pollfd poll_fd = {fd0.get(), POLLIN, 0}; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, 0), SyscallSucceedsWithValue(1)); - - // Should trigger POLLIN event. - EXPECT_EQ(poll_fd.revents & POLLIN, POLLIN); -} - -TEST_F(PollTest, BlockingEventPOLLIN) { - // Create a pipe. - int fds[2]; - ASSERT_THAT(pipe(fds), SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Start a blocking poll on the read fd. - absl::Notification notify; - ScopedThread t([&fd0, ¬ify]() { - notify.Notify(); - - // Poll on the reader fd with POLLIN event. - struct pollfd poll_fd = {fd0.get(), POLLIN, 0}; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, -1), SyscallSucceedsWithValue(1)); - - // Should trigger POLLIN event. - EXPECT_EQ(poll_fd.revents & POLLIN, POLLIN); - }); - - notify.WaitForNotification(); - absl::SleepFor(absl::Seconds(1.0)); - - // Write some data to the pipe. - char s[] = "foo\n"; - ASSERT_THAT(WriteFd(fd1.get(), s, strlen(s) + 1), SyscallSucceeds()); -} - -TEST_F(PollTest, NonBlockingEventPOLLHUP) { - // Create a pipe. - int fds[2]; - ASSERT_THAT(pipe(fds), SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Close the writer fd. - fd1.reset(); - - // Poll on the reader fd with POLLIN event. - struct pollfd poll_fd = {fd0.get(), POLLIN, 0}; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, 0), SyscallSucceedsWithValue(1)); - - // Should trigger POLLHUP event. - EXPECT_EQ(poll_fd.revents & POLLHUP, POLLHUP); - - // Should not trigger POLLIN event. - EXPECT_EQ(poll_fd.revents & POLLIN, 0); -} - -TEST_F(PollTest, BlockingEventPOLLHUP) { - // Create a pipe. - int fds[2]; - ASSERT_THAT(pipe(fds), SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Start a blocking poll on the read fd. - absl::Notification notify; - ScopedThread t([&fd0, ¬ify]() { - notify.Notify(); - - // Poll on the reader fd with POLLIN event. - struct pollfd poll_fd = {fd0.get(), POLLIN, 0}; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, -1), SyscallSucceedsWithValue(1)); - - // Should trigger POLLHUP event. - EXPECT_EQ(poll_fd.revents & POLLHUP, POLLHUP); - - // Should not trigger POLLIN event. - EXPECT_EQ(poll_fd.revents & POLLIN, 0); - }); - - notify.WaitForNotification(); - absl::SleepFor(absl::Seconds(1.0)); - - // Write some data and close the writer fd. - fd1.reset(); -} - -TEST_F(PollTest, NonBlockingEventPOLLERR) { - // Create a pipe. - int fds[2]; - ASSERT_THAT(pipe(fds), SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Close the reader fd. - fd0.reset(); - - // Poll on the writer fd with POLLOUT event. - struct pollfd poll_fd = {fd1.get(), POLLOUT, 0}; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, 0), SyscallSucceedsWithValue(1)); - - // Should trigger POLLERR event. - EXPECT_EQ(poll_fd.revents & POLLERR, POLLERR); - - // Should also trigger POLLOUT event. - EXPECT_EQ(poll_fd.revents & POLLOUT, POLLOUT); -} - -// This test will validate that if an FD is already ready on some event, whether -// it's POLLIN or POLLOUT it will not immediately return unless that's actually -// what the caller was interested in. -TEST_F(PollTest, ImmediatelyReturnOnlyOnPollEvents) { - // Create a pipe. - int fds[2]; - ASSERT_THAT(pipe(fds), SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Wait for read related event on the write side of the pipe, since a write - // is possible on fds[1] it would mean that POLLOUT would return immediately. - // We should make sure that we're not woken up with that state that we didn't - // specificially request. - constexpr int kTimeoutMs = 100; - struct pollfd poll_fd = {fd1.get(), POLLIN | POLLPRI | POLLRDHUP, 0}; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, kTimeoutMs), - SyscallSucceedsWithValue(0)); // We should timeout. - EXPECT_EQ(poll_fd.revents, 0); // Nothing should be in returned events. - - // Now let's poll on POLLOUT and we should get back 1 fd as being ready and - // it should contain POLLOUT in the revents. - poll_fd.events = POLLOUT; - EXPECT_THAT(RetryEINTR(poll)(&poll_fd, 1, kTimeoutMs), - SyscallSucceedsWithValue(1)); // 1 fd should have an event. - EXPECT_EQ(poll_fd.revents, POLLOUT); // POLLOUT should be in revents. -} - -// This test validates that poll(2) while data is available immediately returns. -TEST_F(PollTest, PollLevelTriggered) { - int fds[2] = {}; - ASSERT_THAT(socketpair(AF_UNIX, SOCK_STREAM, /*protocol=*/0, fds), - SyscallSucceeds()); - - FileDescriptor fd0(fds[0]); - FileDescriptor fd1(fds[1]); - - // Write two bytes to the socket. - const char* kBuf = "aa"; - ASSERT_THAT(RetryEINTR(send)(fd0.get(), kBuf, /*len=*/2, /*flags=*/0), - SyscallSucceedsWithValue(2)); // 2 bytes should be written. - - // Poll(2) should immediately return as there is data available to read. - constexpr int kInfiniteTimeout = -1; - struct pollfd poll_fd = {fd1.get(), POLLIN, 0}; - ASSERT_THAT(RetryEINTR(poll)(&poll_fd, /*nfds=*/1, kInfiniteTimeout), - SyscallSucceedsWithValue(1)); // 1 fd should be ready to read. - EXPECT_NE(poll_fd.revents & POLLIN, 0); - - // Read a single byte. - char read_byte = 0; - ASSERT_THAT(RetryEINTR(recv)(fd1.get(), &read_byte, /*len=*/1, /*flags=*/0), - SyscallSucceedsWithValue(1)); // 1 byte should be read. - ASSERT_EQ(read_byte, 'a'); // We should have read a single 'a'. - - // Create a separate pollfd for our second poll. - struct pollfd poll_fd_after = {fd1.get(), POLLIN, 0}; - - // Poll(2) should again immediately return since we only read one byte. - ASSERT_THAT(RetryEINTR(poll)(&poll_fd_after, /*nfds=*/1, kInfiniteTimeout), - SyscallSucceedsWithValue(1)); // 1 fd should be ready to read. - EXPECT_NE(poll_fd_after.revents & POLLIN, 0); -} - -TEST_F(PollTest, Nfds) { - // Stash value of RLIMIT_NOFILES. - struct rlimit rlim; - TEST_PCHECK(getrlimit(RLIMIT_NOFILE, &rlim) == 0); - - // gVisor caps the number of FDs that epoll can use beyond RLIMIT_NOFILE. - constexpr rlim_t gVisorMax = 1048576; - if (rlim.rlim_cur > gVisorMax) { - rlim.rlim_cur = gVisorMax; - TEST_PCHECK(setrlimit(RLIMIT_NOFILE, &rlim) == 0); - } - - rlim_t max_fds = rlim.rlim_cur; - std::cout << "Using limit: " << max_fds; - - // Create an eventfd. Since its value is initially zero, it is writable. - FileDescriptor efd = ASSERT_NO_ERRNO_AND_VALUE(NewEventFD()); - - // Create the biggest possible pollfd array such that each element is valid. - // Each entry in the 'fds' array refers to the eventfd and polls for - // "writable" events (events=POLLOUT). This essentially guarantees that the - // poll() is a no-op and allows negative testing of the 'nfds' parameter. - std::vector<struct pollfd> fds(max_fds + 1, - {.fd = efd.get(), .events = POLLOUT}); - - // Verify that 'nfds' up to RLIMIT_NOFILE are allowed. - EXPECT_THAT(RetryEINTR(poll)(fds.data(), 1, 1), SyscallSucceedsWithValue(1)); - EXPECT_THAT(RetryEINTR(poll)(fds.data(), max_fds / 2, 1), - SyscallSucceedsWithValue(max_fds / 2)); - EXPECT_THAT(RetryEINTR(poll)(fds.data(), max_fds, 1), - SyscallSucceedsWithValue(max_fds)); - - // If 'nfds' exceeds RLIMIT_NOFILE then it must fail with EINVAL. - EXPECT_THAT(poll(fds.data(), max_fds + 1, 1), SyscallFailsWithErrno(EINVAL)); -} - -} // namespace -} // namespace testing -} // namespace gvisor |