diff options
Diffstat (limited to 'test/packetimpact/tests/test_runner.sh')
| -rwxr-xr-x | test/packetimpact/tests/test_runner.sh | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/test/packetimpact/tests/test_runner.sh b/test/packetimpact/tests/test_runner.sh new file mode 100755 index 000000000..5281cb53d --- /dev/null +++ b/test/packetimpact/tests/test_runner.sh @@ -0,0 +1,246 @@ +#!/bin/bash + +# Copyright 2020 The gVisor Authors. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +# Run a packetimpact test. Two docker containers are made, one for the +# Device-Under-Test (DUT) and one for the test bench. Each is attached with +# two networks, one for control packets that aid the test and one for test +# packets which are sent as part of the test and observed for correctness. + +set -euxo pipefail + +function failure() { + local lineno=$1 + local msg=$2 + local filename="$0" + echo "FAIL: $filename:$lineno: $msg" +} +trap 'failure ${LINENO} "$BASH_COMMAND"' ERR + +declare -r LONGOPTS="dut_platform:,posix_server_binary:,testbench_binary:,runtime:,tshark" + +# Don't use declare below so that the error from getopt will end the script. +PARSED=$(getopt --options "" --longoptions=$LONGOPTS --name "$0" -- "$@") + +eval set -- "$PARSED" + +while true; do + case "$1" in + --dut_platform) + # Either "linux" or "netstack". + declare -r DUT_PLATFORM="$2" + shift 2 + ;; + --posix_server_binary) + declare -r POSIX_SERVER_BINARY="$2" + shift 2 + ;; + --testbench_binary) + declare -r TESTBENCH_BINARY="$2" + shift 2 + ;; + --runtime) + # Not readonly because there might be multiple --runtime arguments and we + # want to use just the last one. Only used if --dut_platform is + # "netstack". + declare RUNTIME="$2" + shift 2 + ;; + --tshark) + declare -r TSHARK="1" + shift 1 + ;; + --) + shift + break + ;; + *) + echo "Programming error" + exit 3 + esac +done + +# All the other arguments are scripts. +declare -r scripts="$@" + +# Check that the required flags are defined in a way that is safe for "set -u". +if [[ "${DUT_PLATFORM-}" == "netstack" ]]; then + if [[ -z "${RUNTIME-}" ]]; then + echo "FAIL: Missing --runtime argument: ${RUNTIME-}" + exit 2 + fi + declare -r RUNTIME_ARG="--runtime ${RUNTIME}" +elif [[ "${DUT_PLATFORM-}" == "linux" ]]; then + declare -r RUNTIME_ARG="" +else + echo "FAIL: Bad or missing --dut_platform argument: ${DUT_PLATFORM-}" + exit 2 +fi +if [[ ! -f "${POSIX_SERVER_BINARY-}" ]]; then + echo "FAIL: Bad or missing --posix_server_binary: ${POSIX_SERVER-}" + exit 2 +fi +if [[ ! -f "${TESTBENCH_BINARY-}" ]]; then + echo "FAIL: Bad or missing --testbench_binary: ${TESTBENCH_BINARY-}" + exit 2 +fi + +# Variables specific to the control network and interface start with CTRL_. +# Variables specific to the test network and interface start with TEST_. +# Variables specific to the DUT start with DUT_. +# Variables specific to the test bench start with TESTBENCH_. +# Use random numbers so that test networks don't collide. +declare -r CTRL_NET="ctrl_net-${RANDOM}${RANDOM}" +declare -r TEST_NET="test_net-${RANDOM}${RANDOM}" +# On both DUT and test bench, testing packets are on the eth2 interface. +declare -r TEST_DEVICE="eth2" +# Number of bits in the *_NET_PREFIX variables. +declare -r NET_MASK="24" +function new_net_prefix() { + # Class C, 192.0.0.0 to 223.255.255.255, transitionally has mask 24. + echo "$(shuf -i 192-223 -n 1).$(shuf -i 0-255 -n 1).$(shuf -i 0-255 -n 1)" +} +# Last bits of the DUT's IP address. +declare -r DUT_NET_SUFFIX=".10" +# Control port. +declare -r CTRL_PORT="40000" +# Last bits of the test bench's IP address. +declare -r TESTBENCH_NET_SUFFIX=".20" +declare -r TIMEOUT="60" +declare -r IMAGE_TAG="gcr.io/gvisor-presubmit/packetimpact" +# Make sure that docker is installed. +docker --version + +function finish { + local cleanup_success=1 + for net in "${CTRL_NET}" "${TEST_NET}"; do + # Kill all processes attached to ${net}. + for docker_command in "kill" "rm"; do + (docker network inspect "${net}" \ + --format '{{range $key, $value := .Containers}}{{$key}} {{end}}' \ + | xargs -r docker "${docker_command}") || \ + cleanup_success=0 + done + # Remove the network. + docker network rm "${net}" || \ + cleanup_success=0 + done + + if ((!$cleanup_success)); then + echo "FAIL: Cleanup command failed" + exit 4 + fi +} +trap finish EXIT + +# Subnet for control packets between test bench and DUT. +declare CTRL_NET_PREFIX=$(new_net_prefix) +while ! docker network create \ + "--subnet=${CTRL_NET_PREFIX}.0/${NET_MASK}" "${CTRL_NET}"; do + sleep 0.1 + declare CTRL_NET_PREFIX=$(new_net_prefix) +done + +# Subnet for the packets that are part of the test. +declare TEST_NET_PREFIX=$(new_net_prefix) +while ! docker network create \ + "--subnet=${TEST_NET_PREFIX}.0/${NET_MASK}" "${TEST_NET}"; do + sleep 0.1 + declare TEST_NET_PREFIX=$(new_net_prefix) +done + +docker pull "${IMAGE_TAG}" + +# Create the DUT container and connect to network. +DUT=$(docker create ${RUNTIME_ARG} --privileged --rm \ + --stop-timeout ${TIMEOUT} -it ${IMAGE_TAG}) +docker network connect "${CTRL_NET}" \ + --ip "${CTRL_NET_PREFIX}${DUT_NET_SUFFIX}" "${DUT}" \ + || (docker kill ${DUT}; docker rm ${DUT}; false) +docker network connect "${TEST_NET}" \ + --ip "${TEST_NET_PREFIX}${DUT_NET_SUFFIX}" "${DUT}" \ + || (docker kill ${DUT}; docker rm ${DUT}; false) +docker start "${DUT}" + +# Create the test bench container and connect to network. +TESTBENCH=$(docker create --privileged --rm \ + --stop-timeout ${TIMEOUT} -it ${IMAGE_TAG}) +docker network connect "${CTRL_NET}" \ + --ip "${CTRL_NET_PREFIX}${TESTBENCH_NET_SUFFIX}" "${TESTBENCH}" \ + || (docker kill ${TESTBENCH}; docker rm ${TESTBENCH}; false) +docker network connect "${TEST_NET}" \ + --ip "${TEST_NET_PREFIX}${TESTBENCH_NET_SUFFIX}" "${TESTBENCH}" \ + || (docker kill ${TESTBENCH}; docker rm ${TESTBENCH}; false) +docker start "${TESTBENCH}" + +# Start the posix_server in the DUT. +declare -r DOCKER_POSIX_SERVER_BINARY="/$(basename ${POSIX_SERVER_BINARY})" +docker cp -L ${POSIX_SERVER_BINARY} "${DUT}:${DOCKER_POSIX_SERVER_BINARY}" + +docker exec -t "${DUT}" \ + /bin/bash -c "${DOCKER_POSIX_SERVER_BINARY} \ + --ip ${CTRL_NET_PREFIX}${DUT_NET_SUFFIX} \ + --port ${CTRL_PORT}" & + +# Because the Linux kernel receives the SYN-ACK but didn't send the SYN it will +# issue a RST. To prevent this IPtables can be used to filter those out. +docker exec "${TESTBENCH}" \ + iptables -A INPUT -i ${TEST_DEVICE} -j DROP + +# Wait for the DUT server to come up. Attempt to connect to it from the test +# bench every 100 milliseconds until success. +while ! docker exec "${TESTBENCH}" \ + nc -zv "${CTRL_NET_PREFIX}${DUT_NET_SUFFIX}" "${CTRL_PORT}"; do + sleep 0.1 +done + +declare -r REMOTE_MAC=$(docker exec -t "${DUT}" ip link show \ + "${TEST_DEVICE}" | tail -1 | cut -d' ' -f6) +declare -r LOCAL_MAC=$(docker exec -t "${TESTBENCH}" ip link show \ + "${TEST_DEVICE}" | tail -1 | cut -d' ' -f6) + +declare -r DOCKER_TESTBENCH_BINARY="/$(basename ${TESTBENCH_BINARY})" +docker cp -L "${TESTBENCH_BINARY}" "${TESTBENCH}:${DOCKER_TESTBENCH_BINARY}" + +if [[ -z "${TSHARK-}" ]]; then + # Run tcpdump in the test bench unbuffered, without dns resolution, just on + # the interface with the test packets. + docker exec -t "${TESTBENCH}" \ + tcpdump -S -vvv -U -n -i "${TEST_DEVICE}" net "${TEST_NET_PREFIX}/24" & +else + # Run tshark in the test bench unbuffered, without dns resolution, just on the + # interface with the test packets. + docker exec -t "${TESTBENCH}" \ + tshark -V -l -n -i "${TEST_DEVICE}" \ + host "${TEST_NET_PREFIX}${TESTBENCH_NET_SUFFIX}" & +fi + +# tcpdump and tshark take time to startup +sleep 3 + +# Start a packetimpact test on the test bench. The packetimpact test sends and +# receives packets and also sends POSIX socket commands to the posix_server to +# be executed on the DUT. +docker exec -t "${TESTBENCH}" \ + /bin/bash -c "${DOCKER_TESTBENCH_BINARY} \ + --posix_server_ip=${CTRL_NET_PREFIX}${DUT_NET_SUFFIX} \ + --posix_server_port=${CTRL_PORT} \ + --remote_ipv4=${TEST_NET_PREFIX}${DUT_NET_SUFFIX} \ + --local_ipv4=${TEST_NET_PREFIX}${TESTBENCH_NET_SUFFIX} \ + --remote_mac=${REMOTE_MAC} \ + --local_mac=${LOCAL_MAC} \ + --device=${TEST_DEVICE}" + +echo PASS: No errors. |