diff options
Diffstat (limited to 'runsc/boot/config.go')
-rw-r--r-- | runsc/boot/config.go | 329 |
1 files changed, 329 insertions, 0 deletions
diff --git a/runsc/boot/config.go b/runsc/boot/config.go new file mode 100644 index 000000000..bb01b8fb5 --- /dev/null +++ b/runsc/boot/config.go @@ -0,0 +1,329 @@ +// Copyright 2018 The gVisor Authors. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +package boot + +import ( + "fmt" + "strconv" + "strings" + + "gvisor.dev/gvisor/pkg/refs" + "gvisor.dev/gvisor/pkg/sentry/watchdog" +) + +// FileAccessType tells how the filesystem is accessed. +type FileAccessType int + +const ( + // FileAccessShared sends IO requests to a Gofer process that validates the + // requests and forwards them to the host. + FileAccessShared FileAccessType = iota + + // FileAccessExclusive is the same as FileAccessShared, but enables + // extra caching for improved performance. It should only be used if + // the sandbox has exclusive access to the filesystem. + FileAccessExclusive +) + +// MakeFileAccessType converts type from string. +func MakeFileAccessType(s string) (FileAccessType, error) { + switch s { + case "shared": + return FileAccessShared, nil + case "exclusive": + return FileAccessExclusive, nil + default: + return 0, fmt.Errorf("invalid file access type %q", s) + } +} + +func (f FileAccessType) String() string { + switch f { + case FileAccessShared: + return "shared" + case FileAccessExclusive: + return "exclusive" + default: + return fmt.Sprintf("unknown(%d)", f) + } +} + +// NetworkType tells which network stack to use. +type NetworkType int + +const ( + // NetworkSandbox uses internal network stack, isolated from the host. + NetworkSandbox NetworkType = iota + + // NetworkHost redirects network related syscalls to the host network. + NetworkHost + + // NetworkNone sets up just loopback using netstack. + NetworkNone +) + +// MakeNetworkType converts type from string. +func MakeNetworkType(s string) (NetworkType, error) { + switch s { + case "sandbox": + return NetworkSandbox, nil + case "host": + return NetworkHost, nil + case "none": + return NetworkNone, nil + default: + return 0, fmt.Errorf("invalid network type %q", s) + } +} + +func (n NetworkType) String() string { + switch n { + case NetworkSandbox: + return "sandbox" + case NetworkHost: + return "host" + case NetworkNone: + return "none" + default: + return fmt.Sprintf("unknown(%d)", n) + } +} + +// MakeWatchdogAction converts type from string. +func MakeWatchdogAction(s string) (watchdog.Action, error) { + switch strings.ToLower(s) { + case "log", "logwarning": + return watchdog.LogWarning, nil + case "panic": + return watchdog.Panic, nil + default: + return 0, fmt.Errorf("invalid watchdog action %q", s) + } +} + +// MakeRefsLeakMode converts type from string. +func MakeRefsLeakMode(s string) (refs.LeakMode, error) { + switch strings.ToLower(s) { + case "disabled": + return refs.NoLeakChecking, nil + case "log-names": + return refs.LeaksLogWarning, nil + case "log-traces": + return refs.LeaksLogTraces, nil + default: + return 0, fmt.Errorf("invalid refs leakmode %q", s) + } +} + +func refsLeakModeToString(mode refs.LeakMode) string { + switch mode { + // If not set, default it to disabled. + case refs.UninitializedLeakChecking, refs.NoLeakChecking: + return "disabled" + case refs.LeaksLogWarning: + return "log-names" + case refs.LeaksLogTraces: + return "log-traces" + default: + panic(fmt.Sprintf("Invalid leakmode: %d", mode)) + } +} + +// Config holds configuration that is not part of the runtime spec. +type Config struct { + // RootDir is the runtime root directory. + RootDir string + + // Debug indicates that debug logging should be enabled. + Debug bool + + // LogFilename is the filename to log to, if not empty. + LogFilename string + + // LogFormat is the log format. + LogFormat string + + // DebugLog is the path to log debug information to, if not empty. + DebugLog string + + // PanicLog is the path to log GO's runtime messages, if not empty. + PanicLog string + + // DebugLogFormat is the log format for debug. + DebugLogFormat string + + // FileAccess indicates how the filesystem is accessed. + FileAccess FileAccessType + + // Overlay is whether to wrap the root filesystem in an overlay. + Overlay bool + + // FSGoferHostUDS enables the gofer to mount a host UDS. + FSGoferHostUDS bool + + // Network indicates what type of network to use. + Network NetworkType + + // EnableRaw indicates whether raw sockets should be enabled. Raw + // sockets are disabled by stripping CAP_NET_RAW from the list of + // capabilities. + EnableRaw bool + + // HardwareGSO indicates that hardware segmentation offload is enabled. + HardwareGSO bool + + // SoftwareGSO indicates that software segmentation offload is enabled. + SoftwareGSO bool + + // TXChecksumOffload indicates that TX Checksum Offload is enabled. + TXChecksumOffload bool + + // RXChecksumOffload indicates that RX Checksum Offload is enabled. + RXChecksumOffload bool + + // QDisc indicates the type of queuening discipline to use by default + // for non-loopback interfaces. + QDisc QueueingDiscipline + + // LogPackets indicates that all network packets should be logged. + LogPackets bool + + // Platform is the platform to run on. + Platform string + + // Strace indicates that strace should be enabled. + Strace bool + + // StraceSyscalls is the set of syscalls to trace. If StraceEnable is + // true and this list is empty, then all syscalls will be traced. + StraceSyscalls []string + + // StraceLogSize is the max size of data blobs to display. + StraceLogSize uint + + // DisableSeccomp indicates whether seccomp syscall filters should be + // disabled. Pardon the double negation, but default to enabled is important. + DisableSeccomp bool + + // WatchdogAction sets what action the watchdog takes when triggered. + WatchdogAction watchdog.Action + + // PanicSignal registers signal handling that panics. Usually set to + // SIGUSR2(12) to troubleshoot hangs. -1 disables it. + PanicSignal int + + // ProfileEnable is set to prepare the sandbox to be profiled. + ProfileEnable bool + + // RestoreFile is the path to the saved container image + RestoreFile string + + // NumNetworkChannels controls the number of AF_PACKET sockets that map + // to the same underlying network device. This allows netstack to better + // scale for high throughput use cases. + NumNetworkChannels int + + // Rootless allows the sandbox to be started with a user that is not root. + // Defense is depth measures are weaker with rootless. Specifically, the + // sandbox and Gofer process run as root inside a user namespace with root + // mapped to the caller's user. + Rootless bool + + // AlsoLogToStderr allows to send log messages to stderr. + AlsoLogToStderr bool + + // ReferenceLeakMode sets reference leak check mode + ReferenceLeakMode refs.LeakMode + + // OverlayfsStaleRead instructs the sandbox to assume that the root mount + // is on a Linux overlayfs mount, which does not necessarily preserve + // coherence between read-only and subsequent writable file descriptors + // representing the "same" file. + OverlayfsStaleRead bool + + // TestOnlyAllowRunAsCurrentUserWithoutChroot should only be used in + // tests. It allows runsc to start the sandbox process as the current + // user, and without chrooting the sandbox process. This can be + // necessary in test environments that have limited capabilities. + TestOnlyAllowRunAsCurrentUserWithoutChroot bool + + // TestOnlyTestNameEnv should only be used in tests. It looks up for the + // test name in the container environment variables and adds it to the debug + // log file name. This is done to help identify the log with the test when + // multiple tests are run in parallel, since there is no way to pass + // parameters to the runtime from docker. + TestOnlyTestNameEnv string + + // CPUNumFromQuota sets CPU number count to available CPU quota, using + // least integer value greater than or equal to quota. + // + // E.g. 0.2 CPU quota will result in 1, and 1.9 in 2. + CPUNumFromQuota bool + + // Enables VFS2 (not plumbled through yet). + VFS2 bool +} + +// ToFlags returns a slice of flags that correspond to the given Config. +func (c *Config) ToFlags() []string { + f := []string{ + "--root=" + c.RootDir, + "--debug=" + strconv.FormatBool(c.Debug), + "--log=" + c.LogFilename, + "--log-format=" + c.LogFormat, + "--debug-log=" + c.DebugLog, + "--panic-log=" + c.PanicLog, + "--debug-log-format=" + c.DebugLogFormat, + "--file-access=" + c.FileAccess.String(), + "--overlay=" + strconv.FormatBool(c.Overlay), + "--fsgofer-host-uds=" + strconv.FormatBool(c.FSGoferHostUDS), + "--network=" + c.Network.String(), + "--log-packets=" + strconv.FormatBool(c.LogPackets), + "--platform=" + c.Platform, + "--strace=" + strconv.FormatBool(c.Strace), + "--strace-syscalls=" + strings.Join(c.StraceSyscalls, ","), + "--strace-log-size=" + strconv.Itoa(int(c.StraceLogSize)), + "--watchdog-action=" + c.WatchdogAction.String(), + "--panic-signal=" + strconv.Itoa(c.PanicSignal), + "--profile=" + strconv.FormatBool(c.ProfileEnable), + "--net-raw=" + strconv.FormatBool(c.EnableRaw), + "--num-network-channels=" + strconv.Itoa(c.NumNetworkChannels), + "--rootless=" + strconv.FormatBool(c.Rootless), + "--alsologtostderr=" + strconv.FormatBool(c.AlsoLogToStderr), + "--ref-leak-mode=" + refsLeakModeToString(c.ReferenceLeakMode), + "--gso=" + strconv.FormatBool(c.HardwareGSO), + "--software-gso=" + strconv.FormatBool(c.SoftwareGSO), + "--rx-checksum-offload=" + strconv.FormatBool(c.RXChecksumOffload), + "--tx-checksum-offload=" + strconv.FormatBool(c.TXChecksumOffload), + "--overlayfs-stale-read=" + strconv.FormatBool(c.OverlayfsStaleRead), + "--qdisc=" + c.QDisc.String(), + } + if c.CPUNumFromQuota { + f = append(f, "--cpu-num-from-quota") + } + // Only include these if set since it is never to be used by users. + if c.TestOnlyAllowRunAsCurrentUserWithoutChroot { + f = append(f, "--TESTONLY-unsafe-nonroot=true") + } + if len(c.TestOnlyTestNameEnv) != 0 { + f = append(f, "--TESTONLY-test-name-env="+c.TestOnlyTestNameEnv) + } + + if c.VFS2 { + f = append(f, "--vfs2=true") + } + + return f +} |