diff options
Diffstat (limited to 'pkg')
| -rw-r--r-- | pkg/cpuid/cpuid.go | 221 | ||||
| -rw-r--r-- | pkg/cpuid/cpuid_test.go | 28 |
2 files changed, 155 insertions, 94 deletions
diff --git a/pkg/cpuid/cpuid.go b/pkg/cpuid/cpuid.go index efe9ebe87..f4b1db896 100644 --- a/pkg/cpuid/cpuid.go +++ b/pkg/cpuid/cpuid.go @@ -39,9 +39,20 @@ import ( "gvisor.googlesource.com/gvisor/pkg/log" ) +// Common references for CPUID leaves and bits: +// +// Intel: +// * Intel SDM Volume 2, Chapter 3.2 "CPUID" (more up-to-date) +// * Intel Application Note 485 (more detailed) +// +// AMD: +// * AMD64 APM Volume 3, Appendix 3 "Obtaining Processor Information ..." + // Feature is a unique identifier for a particular cpu feature. We just use an -// int as a feature number on x86. It corresponds to the bit position in the -// basic feature mask returned by a cpuid with eax=1. +// int as a feature number on x86. +// +// Features are numbered according to "blocks". Each block is 32 bits, and +// feature bits from the same source (cpuid leaf/level) are in the same block. type Feature int // block is a collection of 32 Feature bits. @@ -185,36 +196,60 @@ const ( ) // Block 5 constants are the extended feature bits in -// CPUID.(EAX=0x80000001):ECX. These are very sparse, and so the bit positions -// are assigned manually. +// CPUID.(EAX=0x80000001):ECX. const ( - X86FeatureLAHF64 Feature = 5*32 + 0 - X86FeatureLZCNT Feature = 5*32 + 5 - X86FeaturePREFETCHW Feature = 5*32 + 8 + X86FeatureLAHF64 Feature = 5*32 + iota + X86FeatureCMP_LEGACY + X86FeatureSVM + X86FeatureEXTAPIC + X86FeatureCR8_LEGACY + X86FeatureLZCNT + X86FeatureSSE4A + X86FeatureMISALIGNSSE + X86FeaturePREFETCHW + X86FeatureOSVW + X86FeatureIBS + X86FeatureXOP + X86FeatureSKINIT + X86FeatureWDT + _ // ecx bit 14 is reserved. + X86FeatureLWP + X86FeatureFMA4 + X86FeatureTCE + _ // ecx bit 18 is reserved. + _ // ecx bit 19 is reserved. + _ // ecx bit 20 is reserved. + X86FeatureTBM + X86FeatureTOPOLOGY + X86FeaturePERFCTR_CORE + X86FeaturePERFCTR_NB + _ // ecx bit 25 is reserved. + X86FeatureBPEXT + X86FeaturePERFCTR_TSC + X86FeaturePERFCTR_L2 + X86FeatureMWAITX + // ECX[31:30] are reserved. ) // Block 6 constants are the extended feature bits in -// CPUID.(EAX=0x80000001):EDX. These are very sparse, and so the bit positions -// are assigned manually. +// CPUID.(EAX=0x80000001):EDX. +// +// These are sparse, and so the bit positions are assigned manually. const ( - X86FeatureSYSCALL Feature = 6*32 + 11 - X86FeatureNX Feature = 6*32 + 20 - X86FeatureGBPAGES Feature = 6*32 + 26 - X86FeatureRDTSCP Feature = 6*32 + 27 - X86FeatureLM Feature = 6*32 + 29 - // These are not in the most recent intel manual. Not surprising... It - // shouldn't matter but we should find where these bits come from and - // support them. The linux strings are below for completeness. - //X86FeatureMMXEXT - //X86FeatureMP - //X86FeatureFXSR_OPT - //X86Feature3DNOWEXT - //X86Feature3DNOW - //X86FeatureMMXEXT: "mmxext", - //X86FeatureMP: "mp", - //X86FeatureFXSR_OPT: "fxsr_opt", - //X86Feature3DNOWEXT: "3dnowext", - //X86Feature3DNOW: "3dnow", + // On AMD, EDX[24:23] | EDX[17:12] | EDX[9:0] are duplicate features + // also defined in block 1 (in identical bit positions). Those features + // are not listed here. + block6DuplicateMask = 0x183f3ff + + X86FeatureSYSCALL Feature = 6*32 + 11 + X86FeatureNX Feature = 6*32 + 20 + X86FeatureMMXEXT Feature = 6*32 + 22 + X86FeatureFXSR_OPT Feature = 6*32 + 25 + X86FeatureGBPAGES Feature = 6*32 + 26 + X86FeatureRDTSCP Feature = 6*32 + 27 + X86FeatureLM Feature = 6*32 + 29 + X86Feature3DNOWEXT Feature = 6*32 + 30 + X86Feature3DNOW Feature = 6*32 + 31 ) // linuxBlockOrder defines the order in which linux organizes the feature @@ -224,9 +259,8 @@ const ( // block. var linuxBlockOrder = []block{1, 6, 0, 5, 2, 4, 3} -// To make emulation of /proc/cpuinfo easy down the line, these names match the -// names of the basic features in Linux defined in -// arch/x86/kernel/cpu/capflags.c. +// To make emulation of /proc/cpuinfo easy, these names match the names of the +// basic features in Linux defined in arch/x86/kernel/cpu/capflags.c. var x86FeatureStrings = map[Feature]string{ // Block 0. X86FeatureSSE3: "pni", @@ -329,16 +363,42 @@ var x86FeatureStrings = map[Feature]string{ X86FeatureXGETBV1: "xgetbv1", // Block 5. - X86FeatureLAHF64: "lahf_lm", // LAHF/SAHF in long mode - X86FeatureLZCNT: "abm", // Advanced bit manipulation - X86FeaturePREFETCHW: "3dnowprefetch", + X86FeatureLAHF64: "lahf_lm", // LAHF/SAHF in long mode + X86FeatureCMP_LEGACY: "cmp_legacy", + X86FeatureSVM: "svm", + X86FeatureEXTAPIC: "extapic", + X86FeatureCR8_LEGACY: "cr8_legacy", + X86FeatureLZCNT: "abm", // Advanced bit manipulation + X86FeatureSSE4A: "sse4a", + X86FeatureMISALIGNSSE: "misalignsse", + X86FeaturePREFETCHW: "3dnowprefetch", + X86FeatureOSVW: "osvw", + X86FeatureIBS: "ibs", + X86FeatureXOP: "xop", + X86FeatureSKINIT: "skinit", + X86FeatureWDT: "wdt", + X86FeatureLWP: "lwp", + X86FeatureFMA4: "fma4", + X86FeatureTCE: "tce", + X86FeatureTBM: "tbm", + X86FeatureTOPOLOGY: "topoext", + X86FeaturePERFCTR_CORE: "perfctr_core", + X86FeaturePERFCTR_NB: "perfctr_nb", + X86FeatureBPEXT: "bpext", + X86FeaturePERFCTR_TSC: "ptsc", + X86FeaturePERFCTR_L2: "perfctr_l2", + X86FeatureMWAITX: "mwaitx", // Block 6. - X86FeatureSYSCALL: "syscall", - X86FeatureNX: "nx", - X86FeatureGBPAGES: "pdpe1gb", - X86FeatureRDTSCP: "rdtscp", - X86FeatureLM: "lm", + X86FeatureSYSCALL: "syscall", + X86FeatureNX: "nx", + X86FeatureMMXEXT: "mmxext", + X86FeatureFXSR_OPT: "fxsr_opt", + X86FeatureGBPAGES: "pdpe1gb", + X86FeatureRDTSCP: "rdtscp", + X86FeatureLM: "lm", + X86Feature3DNOWEXT: "3dnowext", + X86Feature3DNOW: "3dnow", } // These flags are parse only---they can be used for setting / unsetting the @@ -358,44 +418,29 @@ var x86FeatureParseOnlyStrings = map[Feature]string{ X86FeatureXSAVES: "xsaves", } -// These are the default values of various FeatureSet fields. -const ( - defaultVendorID = "GenuineIntel" - - // These processor signature defaults are derived from the values - // listed in Intel AN485 for i7/Xeon processors. - defaultExtFamily uint8 = 0 - defaultExtModel uint8 = 1 - defaultType uint8 = 0 - defaultFamily uint8 = 0x06 - defaultModel uint8 = 0x0a - defaultSteppingID uint8 = 0 -) - // Just a way to wrap cpuid function numbers. type cpuidFunction uint32 -// The constants below are the lower or "standard" cpuid functions. See Intel -// AN485 for detailed information about each one. +// The constants below are the lower or "standard" cpuid functions, ordered as +// defined by the hardware. const ( - vendorID cpuidFunction = iota // Returns vendor ID and largest standard function. - featureInfo // Returns basic feature bits and processor signature. - cacheDescriptors // Returns list of cache descriptors. - serialNumber // Returns processor serial number (obsolete on new hardware). - deterministicCacheParams // Returns deterministic cache information. See AN485. - monitorMwaitParams // Returns information about monitor/mwait instructions. - powerParams // Returns information about power management and thermal sensors. - extendedFeatureInfo // Returns extended feature bits. - _ // Function 8 is reserved. - DCAParams // Returns direct cache access information. - pmcInfo // Returns information about performance monitoring features. - x2APICInfo // Returns core/logical processor topology. See AN485 for details. - _ // Function 0xc is reserved. - xSaveInfo // Returns information about extended state management. + vendorID cpuidFunction = iota // Returns vendor ID and largest standard function. + featureInfo // Returns basic feature bits and processor signature. + intelCacheDescriptors // Returns list of cache descriptors. Intel only. + intelSerialNumber // Returns processor serial number (obsolete on new hardware). Intel only. + intelDeterministicCacheParams // Returns deterministic cache information. Intel only. + monitorMwaitParams // Returns information about monitor/mwait instructions. + powerParams // Returns information about power management and thermal sensors. + extendedFeatureInfo // Returns extended feature bits. + _ // Function 0x8 is reserved. + intelDCAParams // Returns direct cache access information. Intel only. + intelPMCInfo // Returns information about performance monitoring features. Intel only. + intelX2APICInfo // Returns core/logical processor topology. Intel only. + _ // Function 0xc is reserved. + xSaveInfo // Returns information about extended state management. ) -// The "extended" functions start at 0x80000000. Intel AP-485 has information -// on these as well. +// The "extended" functions start at 0x80000000. const ( extendedFunctionInfo cpuidFunction = 0x80000000 + iota // Returns highest available extended function in eax. extendedFeatures // Returns some extended feature bits in edx and ecx. @@ -419,7 +464,10 @@ func (f Feature) String() string { if s := f.flagString(false); s != "" { return s } - return fmt.Sprintf("<cpuflag %d>", f) + + block := int(f) / 32 + bit := int(f) % 32 + return fmt.Sprintf("<cpuflag %d; block %d bit %d>", f, block, bit) } func (f Feature) flagString(cpuinfoOnly bool) string { @@ -597,27 +645,6 @@ func signatureSplit(v uint32) (ef, em, pt, f, m, sid uint8) { return } -// This factory function is only needed inside the package, package users -// should not be creating and using empty feature sets. -func newEmptyFeatureSet() *FeatureSet { - return newFeatureSet(make(map[Feature]bool)) -} - -// newFeatureSet creates a new FeatureSet with sensible default values and the -// provided set of features. -func newFeatureSet(s map[Feature]bool) *FeatureSet { - return &FeatureSet{ - Set: s, - VendorID: defaultVendorID, - ExtendedFamily: defaultExtFamily, - ExtendedModel: defaultExtModel, - ProcessorType: defaultType, - Family: defaultFamily, - Model: defaultModel, - SteppingID: defaultSteppingID, - } -} - // Helper to convert blockwise feature bit masks into a set of features. Masks // must be provided in order for each block, without skipping them. If a block // does not matter for this feature set, 0 is specified. @@ -726,6 +753,10 @@ func (fs *FeatureSet) EmulateID(origAx, origCx uint32) (ax, bx, cx, dx uint32) { case extendedFeatures: cx = fs.blockMask(block(5)) dx = fs.blockMask(block(6)) + if fs.VendorID == "AuthenticAMD" { + // AMD duplicates some block 1 features in block 6. + dx |= fs.blockMask(block(1)) & block6DuplicateMask + } } return @@ -779,7 +810,9 @@ func HostFeatureSet() *FeatureSet { // eax=0x80000001 gets AMD added feature bits. _, _, cx, dx = HostID(uint32(extendedFeatures), 0) featureBlock5 = cx - featureBlock6 = dx + // Ignore features duplicated from block 1 on AMD. These bits + // are reserved on Intel. + featureBlock6 = dx &^ block6DuplicateMask } set := setFromBlockMasks(featureBlock0, featureBlock1, featureBlock2, featureBlock3, featureBlock4, featureBlock5, featureBlock6) @@ -810,7 +843,7 @@ func initCPUFreq() { // We get the value straight from host /proc/cpuinfo. On machines with // frequency scaling enabled, this will only get the current value - // which will likely be innacurate. This is fine on machines with + // which will likely be inaccurate. This is fine on machines with // frequency scaling disabled. for _, line := range strings.Split(cpuinfo, "\n") { if strings.Contains(line, "cpu MHz") { diff --git a/pkg/cpuid/cpuid_test.go b/pkg/cpuid/cpuid_test.go index 0decd8f08..35e7b8e50 100644 --- a/pkg/cpuid/cpuid_test.go +++ b/pkg/cpuid/cpuid_test.go @@ -18,6 +18,34 @@ import ( "testing" ) +// These are the default values of various FeatureSet fields. +const ( + defaultVendorID = "GenuineIntel" + + // These processor signature defaults are derived from the values + // listed in Intel Application Note 485 for i7/Xeon processors. + defaultExtFamily uint8 = 0 + defaultExtModel uint8 = 1 + defaultType uint8 = 0 + defaultFamily uint8 = 0x06 + defaultModel uint8 = 0x0a + defaultSteppingID uint8 = 0 +) + +// newEmptyFeatureSet creates a new FeatureSet with a sensible default model and no features. +func newEmptyFeatureSet() *FeatureSet { + return &FeatureSet{ + Set: make(map[Feature]bool), + VendorID: defaultVendorID, + ExtendedFamily: defaultExtFamily, + ExtendedModel: defaultExtModel, + ProcessorType: defaultType, + Family: defaultFamily, + Model: defaultModel, + SteppingID: defaultSteppingID, + } +} + var justFPU = &FeatureSet{ Set: map[Feature]bool{ X86FeatureFPU: true, |