diff options
Diffstat (limited to 'pkg')
-rw-r--r-- | pkg/tcpip/network/ipv4/ipv4.go | 2 | ||||
-rw-r--r-- | pkg/tcpip/network/ipv6/ipv6.go | 2 | ||||
-rw-r--r-- | pkg/tcpip/stack/conntrack.go | 24 | ||||
-rw-r--r-- | pkg/tcpip/stack/iptables.go | 53 | ||||
-rw-r--r-- | pkg/tcpip/stack/iptables_targets.go | 5 | ||||
-rw-r--r-- | pkg/tcpip/stack/packet_buffer.go | 13 | ||||
-rw-r--r-- | pkg/tcpip/tests/integration/iptables_test.go | 160 |
7 files changed, 204 insertions, 55 deletions
diff --git a/pkg/tcpip/network/ipv4/ipv4.go b/pkg/tcpip/network/ipv4/ipv4.go index 9b71738ae..6e52cc9bb 100644 --- a/pkg/tcpip/network/ipv4/ipv4.go +++ b/pkg/tcpip/network/ipv4/ipv4.go @@ -439,7 +439,7 @@ func (e *endpoint) WritePacket(r *stack.Route, params stack.NetworkHeaderParams, // We should do this for every packet, rather than only NATted packets, but // removing this check short circuits broadcasts before they are sent out to // other hosts. - if pkt.NatDone { + if pkt.DNATDone { netHeader := header.IPv4(pkt.NetworkHeader().View()) if ep := e.protocol.findEndpointWithAddress(netHeader.DestinationAddress()); ep != nil { // Since we rewrote the packet but it is being routed back to us, we diff --git a/pkg/tcpip/network/ipv6/ipv6.go b/pkg/tcpip/network/ipv6/ipv6.go index 600e805f8..0406a2e6e 100644 --- a/pkg/tcpip/network/ipv6/ipv6.go +++ b/pkg/tcpip/network/ipv6/ipv6.go @@ -761,7 +761,7 @@ func (e *endpoint) WritePacket(r *stack.Route, params stack.NetworkHeaderParams, // We should do this for every packet, rather than only NATted packets, but // removing this check short circuits broadcasts before they are sent out to // other hosts. - if pkt.NatDone { + if pkt.DNATDone { netHeader := header.IPv6(pkt.NetworkHeader().View()) if ep := e.protocol.findEndpointWithAddress(netHeader.DestinationAddress()); ep != nil { // Since we rewrote the packet but it is being routed back to us, we diff --git a/pkg/tcpip/stack/conntrack.go b/pkg/tcpip/stack/conntrack.go index 48f290187..c9a8e72a3 100644 --- a/pkg/tcpip/stack/conntrack.go +++ b/pkg/tcpip/stack/conntrack.go @@ -409,18 +409,19 @@ func (cn *conn) performNATIfNoop(port uint16, address tcpip.Address, dnat bool) } } -func (cn *conn) handlePacket(pkt *PacketBuffer, hook Hook, r *Route) { - if pkt.NatDone { - return - } - +// handlePacket attempts to handle a packet and perform NAT if the connection +// has had NAT performed on it. +// +// Returns true if the packet can skip the NAT table. +func (cn *conn) handlePacket(pkt *PacketBuffer, hook Hook, r *Route) bool { transportHeader, ok := getTransportHeader(pkt) if !ok { - return + return false } fullChecksum := false updatePseudoHeader := false + natDone := &pkt.SNATDone dnat := false switch hook { case Prerouting: @@ -429,11 +430,13 @@ func (cn *conn) handlePacket(pkt *PacketBuffer, hook Hook, r *Route) { fullChecksum = true updatePseudoHeader = true + natDone = &pkt.DNATDone dnat = true case Input: case Forward: panic("should not handle packet in the forwarding hook") case Output: + natDone = &pkt.DNATDone dnat = true fallthrough case Postrouting: @@ -447,6 +450,10 @@ func (cn *conn) handlePacket(pkt *PacketBuffer, hook Hook, r *Route) { panic(fmt.Sprintf("unrecognized hook = %d", hook)) } + if *natDone { + panic(fmt.Sprintf("packet already had NAT(dnat=%t) performed at hook=%s; pkt=%#v", dnat, hook, pkt)) + } + // TODO(gvisor.dev/issue/5748): TCP checksums on inbound packets should be // validated if checksum offloading is off. It may require IP defrag if the // packets are fragmented. @@ -490,7 +497,7 @@ func (cn *conn) handlePacket(pkt *PacketBuffer, hook Hook, r *Route) { return tuple.id(), true }() if !performManip { - return + return false } newPort := tid.dstPort @@ -510,7 +517,8 @@ func (cn *conn) handlePacket(pkt *PacketBuffer, hook Hook, r *Route) { newAddr, ) - pkt.NatDone = true + *natDone = true + return true } // bucket gets the conntrack bucket for a tupleID. diff --git a/pkg/tcpip/stack/iptables.go b/pkg/tcpip/stack/iptables.go index 5808be685..0baa378ea 100644 --- a/pkg/tcpip/stack/iptables.go +++ b/pkg/tcpip/stack/iptables.go @@ -277,10 +277,7 @@ func (it *IPTables) CheckPrerouting(pkt *PacketBuffer, addressEP AddressableEndp return true } - if t := it.connections.getConnOrMaybeInsertNoop(pkt); t != nil { - pkt.tuple = t - t.conn.handlePacket(pkt, hook, nil /* route */) - } + pkt.tuple = it.connections.getConnOrMaybeInsertNoop(pkt) return it.check(hook, pkt, nil /* route */, addressEP, inNicName, "" /* outNicName */) } @@ -298,10 +295,6 @@ func (it *IPTables) CheckInput(pkt *PacketBuffer, inNicName string) bool { return true } - if t := pkt.tuple; t != nil { - t.conn.handlePacket(pkt, hook, nil /* route */) - } - ret := it.check(hook, pkt, nil /* route */, nil /* addressEP */, inNicName, "" /* outNicName */) if t := pkt.tuple; t != nil { t.conn.finalize() @@ -336,10 +329,7 @@ func (it *IPTables) CheckOutput(pkt *PacketBuffer, r *Route, outNicName string) return true } - if t := it.connections.getConnOrMaybeInsertNoop(pkt); t != nil { - pkt.tuple = t - t.conn.handlePacket(pkt, hook, r) - } + pkt.tuple = it.connections.getConnOrMaybeInsertNoop(pkt) return it.check(hook, pkt, r, nil /* addressEP */, "" /* inNicName */, outNicName) } @@ -357,10 +347,6 @@ func (it *IPTables) CheckPostrouting(pkt *PacketBuffer, r *Route, addressEP Addr return true } - if t := pkt.tuple; t != nil { - t.conn.handlePacket(pkt, hook, r) - } - ret := it.check(hook, pkt, r, addressEP, "" /* inNicName */, outNicName) if t := pkt.tuple; t != nil { t.conn.finalize() @@ -396,9 +382,7 @@ func (it *IPTables) check(hook Hook, pkt *PacketBuffer, r *Route, addressEP Addr // Go through each table containing the hook. priorities := it.priorities[hook] for _, tableID := range priorities { - // If handlePacket already NATed the packet, we don't need to - // check the NAT table. - if tableID == NATID && pkt.NatDone { + if t := pkt.tuple; t != nil && tableID == NATID && t.conn.handlePacket(pkt, hook, r) { continue } var table Table @@ -476,7 +460,7 @@ func (it *IPTables) startReaper(interval time.Duration) { func (it *IPTables) CheckOutputPackets(pkts PacketBufferList, r *Route, outNicName string) (drop map[*PacketBuffer]struct{}, natPkts map[*PacketBuffer]struct{}) { return checkPackets(pkts, func(pkt *PacketBuffer) bool { return it.CheckOutput(pkt, r, outNicName) - }) + }, true /* dnat */) } // CheckPostroutingPackets performs the postrouting hook on the packets. @@ -487,24 +471,27 @@ func (it *IPTables) CheckOutputPackets(pkts PacketBufferList, r *Route, outNicNa func (it *IPTables) CheckPostroutingPackets(pkts PacketBufferList, r *Route, addressEP AddressableEndpoint, outNicName string) (drop map[*PacketBuffer]struct{}, natPkts map[*PacketBuffer]struct{}) { return checkPackets(pkts, func(pkt *PacketBuffer) bool { return it.CheckPostrouting(pkt, r, addressEP, outNicName) - }) + }, false /* dnat */) } -func checkPackets(pkts PacketBufferList, f func(*PacketBuffer) bool) (drop map[*PacketBuffer]struct{}, natPkts map[*PacketBuffer]struct{}) { +func checkPackets(pkts PacketBufferList, f func(*PacketBuffer) bool, dnat bool) (drop map[*PacketBuffer]struct{}, natPkts map[*PacketBuffer]struct{}) { for pkt := pkts.Front(); pkt != nil; pkt = pkt.Next() { - if !pkt.NatDone { - if ok := f(pkt); !ok { - if drop == nil { - drop = make(map[*PacketBuffer]struct{}) - } - drop[pkt] = struct{}{} + natDone := &pkt.SNATDone + if dnat { + natDone = &pkt.DNATDone + } + + if ok := f(pkt); !ok { + if drop == nil { + drop = make(map[*PacketBuffer]struct{}) } - if pkt.NatDone { - if natPkts == nil { - natPkts = make(map[*PacketBuffer]struct{}) - } - natPkts[pkt] = struct{}{} + drop[pkt] = struct{}{} + } + if *natDone { + if natPkts == nil { + natPkts = make(map[*PacketBuffer]struct{}) } + natPkts[pkt] = struct{}{} } } return drop, natPkts diff --git a/pkg/tcpip/stack/iptables_targets.go b/pkg/tcpip/stack/iptables_targets.go index 85490e2d4..ef515bdd2 100644 --- a/pkg/tcpip/stack/iptables_targets.go +++ b/pkg/tcpip/stack/iptables_targets.go @@ -175,11 +175,6 @@ type SNATTarget struct { } func natAction(pkt *PacketBuffer, hook Hook, r *Route, port uint16, address tcpip.Address, dnat bool) (RuleVerdict, int) { - // Packet is already manipulated. - if pkt.NatDone { - return RuleAccept, 0 - } - // Drop the packet if network and transport header are not set. if pkt.NetworkHeader().View().IsEmpty() || pkt.TransportHeader().View().IsEmpty() { return RuleDrop, 0 diff --git a/pkg/tcpip/stack/packet_buffer.go b/pkg/tcpip/stack/packet_buffer.go index 888a8bd9d..c4a4bbd22 100644 --- a/pkg/tcpip/stack/packet_buffer.go +++ b/pkg/tcpip/stack/packet_buffer.go @@ -126,9 +126,13 @@ type PacketBuffer struct { EgressRoute RouteInfo GSOOptions GSO - // NatDone indicates if the packet has been manipulated as per NAT - // iptables rule. - NatDone bool + // SNATDone indicates if the packet's source has been manipulated as per + // iptables NAT table. + SNATDone bool + + // DNATDone indicates if the packet's destination has been manipulated as per + // iptables NAT table. + DNATDone bool // PktType indicates the SockAddrLink.PacketType of the packet as defined in // https://www.man7.org/linux/man-pages/man7/packet.7.html. @@ -298,7 +302,8 @@ func (pk *PacketBuffer) Clone() *PacketBuffer { Owner: pk.Owner, GSOOptions: pk.GSOOptions, NetworkProtocolNumber: pk.NetworkProtocolNumber, - NatDone: pk.NatDone, + DNATDone: pk.DNATDone, + SNATDone: pk.SNATDone, TransportProtocolNumber: pk.TransportProtocolNumber, PktType: pk.PktType, NICID: pk.NICID, diff --git a/pkg/tcpip/tests/integration/iptables_test.go b/pkg/tcpip/tests/integration/iptables_test.go index 7f872c271..957a779bf 100644 --- a/pkg/tcpip/tests/integration/iptables_test.go +++ b/pkg/tcpip/tests/integration/iptables_test.go @@ -1285,19 +1285,109 @@ func TestNAT(t *testing.T) { }, } + setupTwiceNAT := func(t *testing.T, s *stack.Stack, netProto tcpip.NetworkProtocolNumber, transProto tcpip.TransportProtocolNumber, dnatAddr tcpip.Address, snatTarget stack.Target) { + t.Helper() + + ipv6 := netProto == ipv6.ProtocolNumber + ipt := s.IPTables() + + table := stack.Table{ + Rules: []stack.Rule{ + // Prerouting + { + Filter: stack.IPHeaderFilter{ + Protocol: transProto, + CheckProtocol: true, + InputInterface: utils.RouterNIC2Name, + }, + Target: &stack.DNATTarget{NetworkProtocol: netProto, Addr: dnatAddr, Port: listenPort}, + }, + { + Target: &stack.AcceptTarget{}, + }, + + // Input + { + Target: &stack.AcceptTarget{}, + }, + + // Forward + { + Target: &stack.AcceptTarget{}, + }, + + // Output + { + Target: &stack.AcceptTarget{}, + }, + + // Postrouting + { + Filter: stack.IPHeaderFilter{ + Protocol: transProto, + CheckProtocol: true, + OutputInterface: utils.RouterNIC1Name, + }, + Target: snatTarget, + }, + { + Target: &stack.AcceptTarget{}, + }, + }, + BuiltinChains: [stack.NumHooks]int{ + stack.Prerouting: 0, + stack.Input: 2, + stack.Forward: 3, + stack.Output: 4, + stack.Postrouting: 5, + }, + } + + if err := ipt.ReplaceTable(stack.NATID, table, ipv6); err != nil { + t.Fatalf("ipt.ReplaceTable(%d, _, %t): %s", stack.NATID, ipv6, err) + } + } + twiceNATTypes := []natType{ + { + name: "DNAT-Masquerade", + setupNAT: func(t *testing.T, s *stack.Stack, netProto tcpip.NetworkProtocolNumber, transProto tcpip.TransportProtocolNumber, snatAddr, dnatAddr tcpip.Address) { + t.Helper() + + setupTwiceNAT(t, s, netProto, transProto, dnatAddr, &stack.MasqueradeTarget{NetworkProtocol: netProto}) + }, + }, + { + name: "DNAT-SNAT", + setupNAT: func(t *testing.T, s *stack.Stack, netProto tcpip.NetworkProtocolNumber, transProto tcpip.TransportProtocolNumber, snatAddr, dnatAddr tcpip.Address) { + t.Helper() + + setupTwiceNAT(t, s, netProto, transProto, dnatAddr, &stack.SNATTarget{NetworkProtocol: netProto, Addr: snatAddr}) + }, + }, + } + tests := []struct { name string netProto tcpip.NetworkProtocolNumber // Setups up the stacks in such a way that: // // - Host2 is the client for all tests. - // - Host1 is the server when performing SNAT + // - When performing SNAT only: + // + Host1 is the server. // + NAT will transform client-originating packets' source addresses to // the router's NIC1's address before reaching Host1. - // - Router is the server when performing DNAT (client will still attempt to - // send packets to Host1). + // - When performing DNAT only: + // + Router is the server. + // + Client will send packets directed to Host1. // + NAT will transform client-originating packets' destination addresses // to the router's NIC2's address. + // - When performing Twice-NAT: + // + Host1 is the server. + // + Client will send packets directed to router's NIC2. + // + NAT will transform client originating packets' destination addresses + // to Host1's address. + // + NAT will transform client-originating packets' source addresses to + // the router's NIC1's address before reaching Host1. epAndAddrs func(t *testing.T, host1Stack, routerStack, host2Stack *stack.Stack, proto tcpip.TransportProtocolNumber) endpointAndAddresses natTypes []natType }{ @@ -1370,6 +1460,38 @@ func TestNAT(t *testing.T) { natTypes: dnatTypes, }, { + name: "IPv4 Twice-NAT", + netProto: ipv4.ProtocolNumber, + epAndAddrs: func(t *testing.T, host1Stack, routerStack, host2Stack *stack.Stack, proto tcpip.TransportProtocolNumber) endpointAndAddresses { + t.Helper() + + listenerStack := host1Stack + serverAddr := tcpip.FullAddress{ + Addr: utils.Host1IPv4Addr.AddressWithPrefix.Address, + Port: listenPort, + } + serverConnectAddr := utils.RouterNIC1IPv4Addr.AddressWithPrefix.Address + clientConnectPort := serverAddr.Port + ep1, ep1WECH := newEP(t, listenerStack, proto, ipv4.ProtocolNumber) + ep2, ep2WECH := newEP(t, host2Stack, proto, ipv4.ProtocolNumber) + return endpointAndAddresses{ + serverEP: ep1, + serverAddr: serverAddr, + serverReadableCH: ep1WECH, + serverConnectAddr: serverConnectAddr, + + clientEP: ep2, + clientAddr: utils.Host2IPv4Addr.AddressWithPrefix.Address, + clientReadableCH: ep2WECH, + clientConnectAddr: tcpip.FullAddress{ + Addr: utils.RouterNIC2IPv4Addr.AddressWithPrefix.Address, + Port: clientConnectPort, + }, + } + }, + natTypes: twiceNATTypes, + }, + { name: "IPv6 SNAT", netProto: ipv6.ProtocolNumber, epAndAddrs: func(t *testing.T, host1Stack, routerStack, host2Stack *stack.Stack, proto tcpip.TransportProtocolNumber) endpointAndAddresses { @@ -1437,6 +1559,38 @@ func TestNAT(t *testing.T) { }, natTypes: dnatTypes, }, + { + name: "IPv6 Twice-NAT", + netProto: ipv6.ProtocolNumber, + epAndAddrs: func(t *testing.T, host1Stack, routerStack, host2Stack *stack.Stack, proto tcpip.TransportProtocolNumber) endpointAndAddresses { + t.Helper() + + listenerStack := host1Stack + serverAddr := tcpip.FullAddress{ + Addr: utils.Host1IPv6Addr.AddressWithPrefix.Address, + Port: listenPort, + } + serverConnectAddr := utils.RouterNIC1IPv6Addr.AddressWithPrefix.Address + clientConnectPort := serverAddr.Port + ep1, ep1WECH := newEP(t, listenerStack, proto, ipv6.ProtocolNumber) + ep2, ep2WECH := newEP(t, host2Stack, proto, ipv6.ProtocolNumber) + return endpointAndAddresses{ + serverEP: ep1, + serverAddr: serverAddr, + serverReadableCH: ep1WECH, + serverConnectAddr: serverConnectAddr, + + clientEP: ep2, + clientAddr: utils.Host2IPv6Addr.AddressWithPrefix.Address, + clientReadableCH: ep2WECH, + clientConnectAddr: tcpip.FullAddress{ + Addr: utils.RouterNIC2IPv6Addr.AddressWithPrefix.Address, + Port: clientConnectPort, + }, + } + }, + natTypes: twiceNATTypes, + }, } subTests := []struct { |