diff options
Diffstat (limited to 'pkg/tcpip')
-rw-r--r-- | pkg/tcpip/stack/stack.go | 16 | ||||
-rw-r--r-- | pkg/tcpip/transport/tcp/endpoint.go | 16 | ||||
-rw-r--r-- | pkg/tcpip/transport/tcp/rack.go | 150 | ||||
-rw-r--r-- | pkg/tcpip/transport/tcp/snd.go | 25 | ||||
-rw-r--r-- | pkg/tcpip/transport/tcp/tcp_state_autogen.go | 44 |
5 files changed, 199 insertions, 52 deletions
diff --git a/pkg/tcpip/stack/stack.go b/pkg/tcpip/stack/stack.go index e56183e71..119c4c505 100644 --- a/pkg/tcpip/stack/stack.go +++ b/pkg/tcpip/stack/stack.go @@ -76,12 +76,16 @@ type TCPCubicState struct { // TCPRACKState is used to hold a copy of the internal RACK state when the // TCPProbeFunc is invoked. type TCPRACKState struct { - XmitTime time.Time - EndSequence seqnum.Value - FACK seqnum.Value - RTT time.Duration - Reord bool - DSACKSeen bool + XmitTime time.Time + EndSequence seqnum.Value + FACK seqnum.Value + RTT time.Duration + Reord bool + DSACKSeen bool + ReoWnd time.Duration + ReoWndIncr uint8 + ReoWndPersist int8 + RTTSeq seqnum.Value } // TCPEndpointID is the unique 4 tuple that identifies a given endpoint. diff --git a/pkg/tcpip/transport/tcp/endpoint.go b/pkg/tcpip/transport/tcp/endpoint.go index 9a53f0d56..6e4e26c39 100644 --- a/pkg/tcpip/transport/tcp/endpoint.go +++ b/pkg/tcpip/transport/tcp/endpoint.go @@ -3031,12 +3031,16 @@ func (e *endpoint) completeState() stack.TCPEndpointState { rc := &e.snd.rc s.Sender.RACKState = stack.TCPRACKState{ - XmitTime: rc.xmitTime, - EndSequence: rc.endSequence, - FACK: rc.fack, - RTT: rc.rtt, - Reord: rc.reorderSeen, - DSACKSeen: rc.dsackSeen, + XmitTime: rc.xmitTime, + EndSequence: rc.endSequence, + FACK: rc.fack, + RTT: rc.rtt, + Reord: rc.reorderSeen, + DSACKSeen: rc.dsackSeen, + ReoWnd: rc.reoWnd, + ReoWndIncr: rc.reoWndIncr, + ReoWndPersist: rc.reoWndPersist, + RTTSeq: rc.rttSeq, } return s } diff --git a/pkg/tcpip/transport/tcp/rack.go b/pkg/tcpip/transport/tcp/rack.go index c0578f2d6..d85cb405a 100644 --- a/pkg/tcpip/transport/tcp/rack.go +++ b/pkg/tcpip/transport/tcp/rack.go @@ -22,12 +22,21 @@ import ( "gvisor.dev/gvisor/pkg/tcpip/seqnum" ) -// wcDelayedACKTimeout is the recommended maximum delayed ACK timer value as -// defined in https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5. -// It stands for worst case delayed ACK timer (WCDelAckT). When FlightSize is -// 1, PTO is inflated by WCDelAckT time to compensate for a potential long -// delayed ACK timer at the receiver. -const wcDelayedACKTimeout = 200 * time.Millisecond +const ( + // wcDelayedACKTimeout is the recommended maximum delayed ACK timer + // value as defined in the RFC. It stands for worst case delayed ACK + // timer (WCDelAckT). When FlightSize is 1, PTO is inflated by + // WCDelAckT time to compensate for a potential long delayed ACK timer + // at the receiver. + // See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5. + wcDelayedACKTimeout = 200 * time.Millisecond + + // tcpRACKRecoveryThreshold is the number of loss recoveries for which + // the reorder window is inflated and after that the reorder window is + // reset to its initial value of minRTT/4. + // See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.2. + tcpRACKRecoveryThreshold = 16 +) // RACK is a loss detection algorithm used in TCP to detect packet loss and // reordering using transmission timestamp of the packets instead of packet or @@ -44,6 +53,11 @@ type rackControl struct { // endSequence is the ending TCP sequence number of rackControl.seg. endSequence seqnum.Value + // exitedRecovery indicates if the connection is exiting loss recovery. + // This flag is set if the sender is leaving the recovery after + // receiving an ACK and is reset during updating of reorder window. + exitedRecovery bool + // fack is the highest selectively or cumulatively acknowledged // sequence. fack seqnum.Value @@ -51,15 +65,30 @@ type rackControl struct { // minRTT is the estimated minimum RTT of the connection. minRTT time.Duration + // reorderSeen indicates if reordering has been detected on this + // connection. + reorderSeen bool + + // reoWnd is the reordering window time used for recording packet + // transmission times. It is used to defer the moment at which RACK + // marks a packet lost. + reoWnd time.Duration + + // reoWndIncr is the multiplier applied to adjust reorder window. + reoWndIncr uint8 + + // reoWndPersist is the number of loss recoveries before resetting + // reorder window. + reoWndPersist int8 + // rtt is the RTT of the most recently delivered packet on the // connection (either cumulatively acknowledged or selectively // acknowledged) that was not marked invalid as a possible spurious // retransmission. rtt time.Duration - // reorderSeen indicates if reordering has been detected on this - // connection. - reorderSeen bool + // rttSeq is the SND.NXT when rtt is updated. + rttSeq seqnum.Value // xmitTime is the latest transmission timestamp of rackControl.seg. xmitTime time.Time `state:".(unixTime)"` @@ -75,29 +104,36 @@ type rackControl struct { // tlpHighRxt the value of sender.sndNxt at the time of sending // a TLP retransmission. tlpHighRxt seqnum.Value + + // snd is a reference to the sender. + snd *sender } // init initializes RACK specific fields. -func (rc *rackControl) init() { +func (rc *rackControl) init(snd *sender, iss seqnum.Value) { + rc.fack = iss + rc.reoWndIncr = 1 + rc.snd = snd rc.probeTimer.init(&rc.probeWaker) } // update will update the RACK related fields when an ACK has been received. -// See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.2 -func (rc *rackControl) update(seg *segment, ackSeg *segment, offset uint32) { +// See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-09#section-6.2 +func (rc *rackControl) update(seg *segment, ackSeg *segment) { rtt := time.Now().Sub(seg.xmitTime) + tsOffset := rc.snd.ep.tsOffset // If the ACK is for a retransmitted packet, do not update if it is a // spurious inference which is determined by below checks: - // 1. When Timestamping option is available, if the TSVal is less than the - // transmit time of the most recent retransmitted packet. + // 1. When Timestamping option is available, if the TSVal is less than + // the transmit time of the most recent retransmitted packet. // 2. When RTT calculated for the packet is less than the smoothed RTT // for the connection. // See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.2 // step 2 if seg.xmitCount > 1 { if ackSeg.parsedOptions.TS && ackSeg.parsedOptions.TSEcr != 0 { - if ackSeg.parsedOptions.TSEcr < tcpTimeStamp(seg.xmitTime, offset) { + if ackSeg.parsedOptions.TSEcr < tcpTimeStamp(seg.xmitTime, tsOffset) { return } } @@ -149,9 +185,8 @@ func (rc *rackControl) detectReorder(seg *segment) { } } -// setDSACKSeen updates rack control if duplicate SACK is seen by the connection. -func (rc *rackControl) setDSACKSeen() { - rc.dsackSeen = true +func (rc *rackControl) setDSACKSeen(dsackSeen bool) { + rc.dsackSeen = dsackSeen } // shouldSchedulePTO dictates whether we should schedule a PTO or not. @@ -272,3 +307,82 @@ func (s *sender) detectTLPRecovery(ack seqnum.Value, rcvdSeg *segment) { } } } + +// updateRACKReorderWindow updates the reorder window. +// See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.2 +// * Step 4: Update RACK reordering window +// To handle the prevalent small degree of reordering, RACK.reo_wnd serves as +// an allowance for settling time before marking a packet lost. RACK starts +// initially with a conservative window of min_RTT/4. If no reordering has +// been observed RACK uses reo_wnd of zero during loss recovery, in order to +// retransmit quickly, or when the number of DUPACKs exceeds the classic +// DUPACKthreshold. +func (rc *rackControl) updateRACKReorderWindow(ackSeg *segment) { + dsackSeen := rc.dsackSeen + snd := rc.snd + + // React to DSACK once per round trip. + // If SND.UNA < RACK.rtt_seq: + // RACK.dsack = false + if snd.sndUna.LessThan(rc.rttSeq) { + dsackSeen = false + } + + // If RACK.dsack: + // RACK.reo_wnd_incr += 1 + // RACK.dsack = false + // RACK.rtt_seq = SND.NXT + // RACK.reo_wnd_persist = 16 + if dsackSeen { + rc.reoWndIncr++ + dsackSeen = false + rc.rttSeq = snd.sndNxt + rc.reoWndPersist = tcpRACKRecoveryThreshold + } else if rc.exitedRecovery { + // Else if exiting loss recovery: + // RACK.reo_wnd_persist -= 1 + // If RACK.reo_wnd_persist <= 0: + // RACK.reo_wnd_incr = 1 + rc.reoWndPersist-- + if rc.reoWndPersist <= 0 { + rc.reoWndIncr = 1 + } + rc.exitedRecovery = false + } + + // Reorder window is zero during loss recovery, or when the number of + // DUPACKs exceeds the classic DUPACKthreshold. + // If RACK.reord is FALSE: + // If in loss recovery: (If in fast or timeout recovery) + // RACK.reo_wnd = 0 + // Return + // Else if RACK.pkts_sacked >= RACK.dupthresh: + // RACK.reo_wnd = 0 + // return + if !rc.reorderSeen { + if snd.state == tcpip.RTORecovery || snd.state == tcpip.SACKRecovery { + rc.reoWnd = 0 + return + } + + if snd.sackedOut >= nDupAckThreshold { + rc.reoWnd = 0 + return + } + } + + // Calculate reorder window. + // RACK.reo_wnd = RACK.min_RTT / 4 * RACK.reo_wnd_incr + // RACK.reo_wnd = min(RACK.reo_wnd, SRTT) + snd.rtt.Lock() + srtt := snd.rtt.srtt + snd.rtt.Unlock() + rc.reoWnd = time.Duration((int64(rc.minRTT) / 4) * int64(rc.reoWndIncr)) + if srtt < rc.reoWnd { + rc.reoWnd = srtt + } +} + +func (rc *rackControl) exitRecovery() { + rc.exitedRecovery = true +} diff --git a/pkg/tcpip/transport/tcp/snd.go b/pkg/tcpip/transport/tcp/snd.go index 2967c9f97..dfc8fd248 100644 --- a/pkg/tcpip/transport/tcp/snd.go +++ b/pkg/tcpip/transport/tcp/snd.go @@ -258,14 +258,9 @@ func newSender(ep *endpoint, iss, irs seqnum.Value, sndWnd seqnum.Size, mss uint highRxt: iss, rescueRxt: iss, }, - rc: rackControl{ - fack: iss, - }, gso: ep.gso != nil, } - s.rc.init() - if s.gso { s.ep.gso.MSS = uint16(maxPayloadSize) } @@ -273,6 +268,7 @@ func newSender(ep *endpoint, iss, irs seqnum.Value, sndWnd seqnum.Size, mss uint s.cc = s.initCongestionControl(ep.cc) s.lr = s.initLossRecovery() + s.rc.init(s, iss) // A negative sndWndScale means that no scaling is in use, otherwise we // store the scaling value. @@ -1058,7 +1054,6 @@ func (s *sender) leaveRecovery() { // Deflate cwnd. It had been artificially inflated when new dups arrived. s.sndCwnd = s.sndSsthresh - s.cc.PostRecovery() } @@ -1195,11 +1190,13 @@ func (s *sender) isDupAck(seg *segment) bool { // See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.2 // steps 2 and 3. func (s *sender) walkSACK(rcvdSeg *segment) { + s.rc.setDSACKSeen(false) + // Look for DSACK block. idx := 0 n := len(rcvdSeg.parsedOptions.SACKBlocks) if checkDSACK(rcvdSeg) { - s.rc.setDSACKSeen() + s.rc.setDSACKSeen(true) idx = 1 n-- } @@ -1220,7 +1217,7 @@ func (s *sender) walkSACK(rcvdSeg *segment) { for _, sb := range sackBlocks { for seg != nil && seg.sequenceNumber.LessThan(sb.End) && seg.xmitCount != 0 { if sb.Start.LessThanEq(seg.sequenceNumber) && !seg.acked { - s.rc.update(seg, rcvdSeg, s.ep.tsOffset) + s.rc.update(seg, rcvdSeg) s.rc.detectReorder(seg) seg.acked = true s.sackedOut += s.pCount(seg, s.maxPayloadSize) @@ -1424,7 +1421,7 @@ func (s *sender) handleRcvdSegment(rcvdSeg *segment) { // Update the RACK fields if SACK is enabled. if s.ep.sackPermitted && !seg.acked { - s.rc.update(seg, rcvdSeg, s.ep.tsOffset) + s.rc.update(seg, rcvdSeg) s.rc.detectReorder(seg) } @@ -1454,6 +1451,10 @@ func (s *sender) handleRcvdSegment(rcvdSeg *segment) { s.cc.Update(originalOutstanding - s.outstanding) if s.fr.last.LessThan(s.sndUna) { s.state = tcpip.Open + // Update RACK when we are exiting fast or RTO + // recovery as described in the RFC + // draft-ietf-tcpm-rack-08 Section-7.2 Step 4. + s.rc.exitRecovery() } } @@ -1477,6 +1478,12 @@ func (s *sender) handleRcvdSegment(rcvdSeg *segment) { } } + // Update RACK reorder window. + // See: https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.2 + // * Upon receiving an ACK: + // * Step 4: Update RACK reordering window + s.rc.updateRACKReorderWindow(rcvdSeg) + // Now that we've popped all acknowledged data from the retransmit // queue, retransmit if needed. if s.fr.active { diff --git a/pkg/tcpip/transport/tcp/tcp_state_autogen.go b/pkg/tcpip/transport/tcp/tcp_state_autogen.go index 52824b728..cb49e63fe 100644 --- a/pkg/tcpip/transport/tcp/tcp_state_autogen.go +++ b/pkg/tcpip/transport/tcp/tcp_state_autogen.go @@ -393,13 +393,19 @@ func (rc *rackControl) StateFields() []string { return []string{ "dsackSeen", "endSequence", + "exitedRecovery", "fack", "minRTT", - "rtt", "reorderSeen", + "reoWnd", + "reoWndIncr", + "reoWndPersist", + "rtt", + "rttSeq", "xmitTime", "tlpRxtOut", "tlpHighRxt", + "snd", } } @@ -408,27 +414,39 @@ func (rc *rackControl) beforeSave() {} func (rc *rackControl) StateSave(stateSinkObject state.Sink) { rc.beforeSave() var xmitTimeValue unixTime = rc.saveXmitTime() - stateSinkObject.SaveValue(6, xmitTimeValue) + stateSinkObject.SaveValue(11, xmitTimeValue) stateSinkObject.Save(0, &rc.dsackSeen) stateSinkObject.Save(1, &rc.endSequence) - stateSinkObject.Save(2, &rc.fack) - stateSinkObject.Save(3, &rc.minRTT) - stateSinkObject.Save(4, &rc.rtt) + stateSinkObject.Save(2, &rc.exitedRecovery) + stateSinkObject.Save(3, &rc.fack) + stateSinkObject.Save(4, &rc.minRTT) stateSinkObject.Save(5, &rc.reorderSeen) - stateSinkObject.Save(7, &rc.tlpRxtOut) - stateSinkObject.Save(8, &rc.tlpHighRxt) + stateSinkObject.Save(6, &rc.reoWnd) + stateSinkObject.Save(7, &rc.reoWndIncr) + stateSinkObject.Save(8, &rc.reoWndPersist) + stateSinkObject.Save(9, &rc.rtt) + stateSinkObject.Save(10, &rc.rttSeq) + stateSinkObject.Save(12, &rc.tlpRxtOut) + stateSinkObject.Save(13, &rc.tlpHighRxt) + stateSinkObject.Save(14, &rc.snd) } func (rc *rackControl) StateLoad(stateSourceObject state.Source) { stateSourceObject.Load(0, &rc.dsackSeen) stateSourceObject.Load(1, &rc.endSequence) - stateSourceObject.Load(2, &rc.fack) - stateSourceObject.Load(3, &rc.minRTT) - stateSourceObject.Load(4, &rc.rtt) + stateSourceObject.Load(2, &rc.exitedRecovery) + stateSourceObject.Load(3, &rc.fack) + stateSourceObject.Load(4, &rc.minRTT) stateSourceObject.Load(5, &rc.reorderSeen) - stateSourceObject.Load(7, &rc.tlpRxtOut) - stateSourceObject.Load(8, &rc.tlpHighRxt) - stateSourceObject.LoadValue(6, new(unixTime), func(y interface{}) { rc.loadXmitTime(y.(unixTime)) }) + stateSourceObject.Load(6, &rc.reoWnd) + stateSourceObject.Load(7, &rc.reoWndIncr) + stateSourceObject.Load(8, &rc.reoWndPersist) + stateSourceObject.Load(9, &rc.rtt) + stateSourceObject.Load(10, &rc.rttSeq) + stateSourceObject.Load(12, &rc.tlpRxtOut) + stateSourceObject.Load(13, &rc.tlpHighRxt) + stateSourceObject.Load(14, &rc.snd) + stateSourceObject.LoadValue(11, new(unixTime), func(y interface{}) { rc.loadXmitTime(y.(unixTime)) }) stateSourceObject.AfterLoad(rc.afterLoad) } |