diff options
Diffstat (limited to 'pkg/tcpip/tcpip.go')
| -rw-r--r-- | pkg/tcpip/tcpip.go | 565 |
1 files changed, 478 insertions, 87 deletions
diff --git a/pkg/tcpip/tcpip.go b/pkg/tcpip/tcpip.go index 03be7d3d4..07c85ce59 100644 --- a/pkg/tcpip/tcpip.go +++ b/pkg/tcpip/tcpip.go @@ -35,15 +35,17 @@ import ( "reflect" "strconv" "strings" - "sync" "sync/atomic" "time" + "gvisor.dev/gvisor/pkg/sync" "gvisor.dev/gvisor/pkg/tcpip/buffer" - "gvisor.dev/gvisor/pkg/tcpip/iptables" "gvisor.dev/gvisor/pkg/waiter" ) +// Using header.IPv4AddressSize would cause an import cycle. +const ipv4AddressSize = 4 + // Error represents an error in the netstack error space. Using a special type // ensures that errors outside of this space are not accidentally introduced. // @@ -111,6 +113,71 @@ var ( ErrAddressFamilyNotSupported = &Error{msg: "address family not supported by protocol"} ) +var messageToError map[string]*Error + +var populate sync.Once + +// StringToError converts an error message to the error. +func StringToError(s string) *Error { + populate.Do(func() { + var errors = []*Error{ + ErrUnknownProtocol, + ErrUnknownNICID, + ErrUnknownDevice, + ErrUnknownProtocolOption, + ErrDuplicateNICID, + ErrDuplicateAddress, + ErrNoRoute, + ErrBadLinkEndpoint, + ErrAlreadyBound, + ErrInvalidEndpointState, + ErrAlreadyConnecting, + ErrAlreadyConnected, + ErrNoPortAvailable, + ErrPortInUse, + ErrBadLocalAddress, + ErrClosedForSend, + ErrClosedForReceive, + ErrWouldBlock, + ErrConnectionRefused, + ErrTimeout, + ErrAborted, + ErrConnectStarted, + ErrDestinationRequired, + ErrNotSupported, + ErrQueueSizeNotSupported, + ErrNotConnected, + ErrConnectionReset, + ErrConnectionAborted, + ErrNoSuchFile, + ErrInvalidOptionValue, + ErrNoLinkAddress, + ErrBadAddress, + ErrNetworkUnreachable, + ErrMessageTooLong, + ErrNoBufferSpace, + ErrBroadcastDisabled, + ErrNotPermitted, + ErrAddressFamilyNotSupported, + } + + messageToError = make(map[string]*Error) + for _, e := range errors { + if messageToError[e.String()] != nil { + panic("tcpip errors with duplicated message: " + e.String()) + } + messageToError[e.String()] = e + } + }) + + e, ok := messageToError[s] + if !ok { + panic("unknown error message: " + s) + } + + return e +} + // Errors related to Subnet var ( errSubnetLengthMismatch = errors.New("subnet length of address and mask differ") @@ -128,7 +195,7 @@ func (e ErrSaveRejection) Error() string { return "save rejected due to unsupported networking state: " + e.Err.Error() } -// A Clock provides the current time. +// A Clock provides the current time and schedules work for execution. // // Times returned by a Clock should always be used for application-visible // time. Only monotonic times should be used for netstack internal timekeeping. @@ -139,6 +206,31 @@ type Clock interface { // NowMonotonic returns a monotonic time value. NowMonotonic() int64 + + // AfterFunc waits for the duration to elapse and then calls f in its own + // goroutine. It returns a Timer that can be used to cancel the call using + // its Stop method. + AfterFunc(d time.Duration, f func()) Timer +} + +// Timer represents a single event. A Timer must be created with +// Clock.AfterFunc. +type Timer interface { + // Stop prevents the Timer from firing. It returns true if the call stops the + // timer, false if the timer has already expired or been stopped. + // + // If Stop returns false, then the timer has already expired and the function + // f of Clock.AfterFunc(d, f) has been started in its own goroutine; Stop + // does not wait for f to complete before returning. If the caller needs to + // know whether f is completed, it must coordinate with f explicitly. + Stop() bool + + // Reset changes the timer to expire after duration d. + // + // Reset should be invoked only on stopped or expired timers. If the timer is + // known to have expired, Reset can be used directly. Otherwise, the caller + // must coordinate with the function f of Clock.AfterFunc(d, f). + Reset(d time.Duration) } // Address is a byte slice cast as a string that represents the address of a @@ -231,6 +323,36 @@ func (s *Subnet) Broadcast() Address { return Address(addr) } +// IsBroadcast returns true if the address is considered a broadcast address. +func (s *Subnet) IsBroadcast(address Address) bool { + // Only IPv4 supports the notion of a broadcast address. + if len(address) != ipv4AddressSize { + return false + } + + // Normally, we would just compare address with the subnet's broadcast + // address but there is an exception where a simple comparison is not + // correct. This exception is for /31 and /32 IPv4 subnets where all + // addresses are considered valid host addresses. + // + // For /31 subnets, the case is easy. RFC 3021 Section 2.1 states that + // both addresses in a /31 subnet "MUST be interpreted as host addresses." + // + // For /32, the case is a bit more vague. RFC 3021 makes no mention of /32 + // subnets. However, the same reasoning applies - if an exception is not + // made, then there do not exist any host addresses in a /32 subnet. RFC + // 4632 Section 3.1 also vaguely implies this interpretation by referring + // to addresses in /32 subnets as "host routes." + return s.Prefix() <= 30 && s.Broadcast() == address +} + +// Equal returns true if s equals o. +// +// Needed to use cmp.Equal on Subnet as its fields are unexported. +func (s Subnet) Equal(o Subnet) bool { + return s == o +} + // NICID is a number that uniquely identifies a NIC. type NICID int32 @@ -245,6 +367,28 @@ const ( ShutdownWrite ) +// PacketType is used to indicate the destination of the packet. +type PacketType uint8 + +const ( + // PacketHost indicates a packet addressed to the local host. + PacketHost PacketType = iota + + // PacketOtherHost indicates an outgoing packet addressed to + // another host caught by a NIC in promiscuous mode. + PacketOtherHost + + // PacketOutgoing for a packet originating from the local host + // that is looped back to a packet socket. + PacketOutgoing + + // PacketBroadcast indicates a link layer broadcast packet. + PacketBroadcast + + // PacketMulticast indicates a link layer multicast packet. + PacketMulticast +) + // FullAddress represents a full transport node address, as required by the // Connect() and Bind() methods. // @@ -301,7 +445,7 @@ type ControlMessages struct { // HasTimestamp indicates whether Timestamp is valid/set. HasTimestamp bool - // Timestamp is the time (in ns) that the last packed used to create + // Timestamp is the time (in ns) that the last packet used to create // the read data was received. Timestamp int64 @@ -310,6 +454,33 @@ type ControlMessages struct { // Inq is the number of bytes ready to be received. Inq int32 + + // HasTOS indicates whether Tos is valid/set. + HasTOS bool + + // TOS is the IPv4 type of service of the associated packet. + TOS uint8 + + // HasTClass indicates whether TClass is valid/set. + HasTClass bool + + // TClass is the IPv6 traffic class of the associated packet. + TClass uint32 + + // HasIPPacketInfo indicates whether PacketInfo is set. + HasIPPacketInfo bool + + // PacketInfo holds interface and address data on an incoming packet. + PacketInfo IPPacketInfo +} + +// PacketOwner is used to get UID and GID of the packet. +type PacketOwner interface { + // UID returns UID of the packet. + UID() uint32 + + // GID returns GID of the packet. + GID() uint32 } // Endpoint is the interface implemented by transport protocols (e.g., tcp, udp) @@ -317,9 +488,15 @@ type ControlMessages struct { // networking stack. type Endpoint interface { // Close puts the endpoint in a closed state and frees all resources - // associated with it. + // associated with it. Close initiates the teardown process, the + // Endpoint may not be fully closed when Close returns. Close() + // Abort initiates an expedited endpoint teardown. As compared to + // Close, Abort prioritizes closing the Endpoint quickly over cleanly. + // Abort is best effort; implementing Abort with Close is acceptable. + Abort() + // Read reads data from the endpoint and optionally returns the sender. // // This method does not block if there is no data pending. It will also @@ -404,17 +581,25 @@ type Endpoint interface { // SetSockOpt sets a socket option. opt should be one of the *Option types. SetSockOpt(opt interface{}) *Error + // SetSockOptBool sets a socket option, for simple cases where a value + // has the bool type. + SetSockOptBool(opt SockOptBool, v bool) *Error + // SetSockOptInt sets a socket option, for simple cases where a value // has the int type. - SetSockOptInt(opt SockOpt, v int) *Error + SetSockOptInt(opt SockOptInt, v int) *Error // GetSockOpt gets a socket option. opt should be a pointer to one of the // *Option types. GetSockOpt(opt interface{}) *Error + // GetSockOptBool gets a socket option for simple cases where a return + // value has the bool type. + GetSockOptBool(SockOptBool) (bool, *Error) + // GetSockOptInt gets a socket option for simple cases where a return // value has the int type. - GetSockOptInt(SockOpt) (int, *Error) + GetSockOptInt(SockOptInt) (int, *Error) // State returns a socket's lifecycle state. The returned value is // protocol-specific and is primarily used for diagnostics. @@ -427,14 +612,36 @@ type Endpoint interface { // NOTE: This method is a no-op for sockets other than TCP. ModerateRecvBuf(copied int) - // IPTables returns the iptables for this endpoint's stack. - IPTables() (iptables.IPTables, error) - // Info returns a copy to the transport endpoint info. Info() EndpointInfo // Stats returns a reference to the endpoint stats. Stats() EndpointStats + + // SetOwner sets the task owner to the endpoint owner. + SetOwner(owner PacketOwner) +} + +// LinkPacketInfo holds Link layer information for a received packet. +// +// +stateify savable +type LinkPacketInfo struct { + // Protocol is the NetworkProtocolNumber for the packet. + Protocol NetworkProtocolNumber + + // PktType is used to indicate the destination of the packet. + PktType PacketType +} + +// PacketEndpoint are additional methods that are only implemented by Packet +// endpoints. +type PacketEndpoint interface { + // ReadPacket reads a datagram/packet from the endpoint and optionally + // returns the sender and additional LinkPacketInfo. + // + // This method does not block if there is no data pending. It will also + // either return an error or data, never both. + ReadPacket(*FullAddress, *LinkPacketInfo) (buffer.View, ControlMessages, *Error) } // EndpointInfo is the interface implemented by each endpoint info struct. @@ -469,13 +676,117 @@ type WriteOptions struct { Atomic bool } -// SockOpt represents socket options which values have the int type. -type SockOpt int +// SockOptBool represents socket options which values have the bool type. +type SockOptBool int const ( + // BroadcastOption is used by SetSockOptBool/GetSockOptBool to specify + // whether datagram sockets are allowed to send packets to a broadcast + // address. + BroadcastOption SockOptBool = iota + + // CorkOption is used by SetSockOptBool/GetSockOptBool to specify if + // data should be held until segments are full by the TCP transport + // protocol. + CorkOption + + // DelayOption is used by SetSockOptBool/GetSockOptBool to specify if + // data should be sent out immediately by the transport protocol. For + // TCP, it determines if the Nagle algorithm is on or off. + DelayOption + + // KeepaliveEnabledOption is used by SetSockOptBool/GetSockOptBool to + // specify whether TCP keepalive is enabled for this socket. + KeepaliveEnabledOption + + // MulticastLoopOption is used by SetSockOptBool/GetSockOptBool to + // specify whether multicast packets sent over a non-loopback interface + // will be looped back. + MulticastLoopOption + + // NoChecksumOption is used by SetSockOptBool/GetSockOptBool to specify + // whether UDP checksum is disabled for this socket. + NoChecksumOption + + // PasscredOption is used by SetSockOptBool/GetSockOptBool to specify + // whether SCM_CREDENTIALS socket control messages are enabled. + // + // Only supported on Unix sockets. + PasscredOption + + // QuickAckOption is stubbed out in SetSockOptBool/GetSockOptBool. + QuickAckOption + + // ReceiveTClassOption is used by SetSockOptBool/GetSockOptBool to + // specify if the IPV6_TCLASS ancillary message is passed with incoming + // packets. + ReceiveTClassOption + + // ReceiveTOSOption is used by SetSockOptBool/GetSockOptBool to specify + // if the TOS ancillary message is passed with incoming packets. + ReceiveTOSOption + + // ReceiveIPPacketInfoOption is used by SetSockOptBool/GetSockOptBool to + // specify if more inforamtion is provided with incoming packets such as + // interface index and address. + ReceiveIPPacketInfoOption + + // ReuseAddressOption is used by SetSockOptBool/GetSockOptBool to + // specify whether Bind() should allow reuse of local address. + ReuseAddressOption + + // ReusePortOption is used by SetSockOptBool/GetSockOptBool to permit + // multiple sockets to be bound to an identical socket address. + ReusePortOption + + // V6OnlyOption is used by SetSockOptBool/GetSockOptBool to specify + // whether an IPv6 socket is to be restricted to sending and receiving + // IPv6 packets only. + V6OnlyOption + + // IPHdrIncludedOption is used by SetSockOpt to indicate for a raw + // endpoint that all packets being written have an IP header and the + // endpoint should not attach an IP header. + IPHdrIncludedOption +) + +// SockOptInt represents socket options which values have the int type. +type SockOptInt int + +const ( + // KeepaliveCountOption is used by SetSockOptInt/GetSockOptInt to + // specify the number of un-ACKed TCP keepalives that will be sent + // before the connection is closed. + KeepaliveCountOption SockOptInt = iota + + // IPv4TOSOption is used by SetSockOptInt/GetSockOptInt to specify TOS + // for all subsequent outgoing IPv4 packets from the endpoint. + IPv4TOSOption + + // IPv6TrafficClassOption is used by SetSockOptInt/GetSockOptInt to + // specify TOS for all subsequent outgoing IPv6 packets from the + // endpoint. + IPv6TrafficClassOption + + // MaxSegOption is used by SetSockOptInt/GetSockOptInt to set/get the + // current Maximum Segment Size(MSS) value as specified using the + // TCP_MAXSEG option. + MaxSegOption + + // MTUDiscoverOption is used to set/get the path MTU discovery setting. + // + // NOTE: Setting this option to any other value than PMTUDiscoveryDont + // is not supported and will fail as such, and getting this option will + // always return PMTUDiscoveryDont. + MTUDiscoverOption + + // MulticastTTLOption is used by SetSockOptInt/GetSockOptInt to control + // the default TTL value for multicast messages. The default is 1. + MulticastTTLOption + // ReceiveQueueSizeOption is used in GetSockOptInt to specify that the // number of unread bytes in the input buffer should be returned. - ReceiveQueueSizeOption SockOpt = iota + ReceiveQueueSizeOption // SendBufferSizeOption is used by SetSockOptInt/GetSockOptInt to // specify the send buffer size option. @@ -489,47 +800,52 @@ const ( // number of unread bytes in the output buffer should be returned. SendQueueSizeOption - // DelayOption is used by SetSockOpt/GetSockOpt to specify if data - // should be sent out immediately by the transport protocol. For TCP, - // it determines if the Nagle algorithm is on or off. - DelayOption + // TTLOption is used by SetSockOptInt/GetSockOptInt to control the + // default TTL/hop limit value for unicast messages. The default is + // protocol specific. + // + // A zero value indicates the default. + TTLOption - // TODO(b/137664753): convert all int socket options to be handled via - // GetSockOptInt. + // TCPSynCountOption is used by SetSockOptInt/GetSockOptInt to specify + // the number of SYN retransmits that TCP should send before aborting + // the attempt to connect. It cannot exceed 255. + // + // NOTE: This option is currently only stubbed out and is no-op. + TCPSynCountOption + + // TCPWindowClampOption is used by SetSockOptInt/GetSockOptInt to bound + // the size of the advertised window to this value. + // + // NOTE: This option is currently only stubed out and is a no-op + TCPWindowClampOption ) -// ErrorOption is used in GetSockOpt to specify that the last error reported by -// the endpoint should be cleared and returned. -type ErrorOption struct{} +const ( + // PMTUDiscoveryWant is a setting of the MTUDiscoverOption to use + // per-route settings. + PMTUDiscoveryWant int = iota -// V6OnlyOption is used by SetSockOpt/GetSockOpt to specify whether an IPv6 -// socket is to be restricted to sending and receiving IPv6 packets only. -type V6OnlyOption int + // PMTUDiscoveryDont is a setting of the MTUDiscoverOption to disable + // path MTU discovery. + PMTUDiscoveryDont -// CorkOption is used by SetSockOpt/GetSockOpt to specify if data should be -// held until segments are full by the TCP transport protocol. -type CorkOption int + // PMTUDiscoveryDo is a setting of the MTUDiscoverOption to always do + // path MTU discovery. + PMTUDiscoveryDo -// ReuseAddressOption is used by SetSockOpt/GetSockOpt to specify whether Bind() -// should allow reuse of local address. -type ReuseAddressOption int + // PMTUDiscoveryProbe is a setting of the MTUDiscoverOption to set DF + // but ignore path MTU. + PMTUDiscoveryProbe +) -// ReusePortOption is used by SetSockOpt/GetSockOpt to permit multiple sockets -// to be bound to an identical socket address. -type ReusePortOption int +// ErrorOption is used in GetSockOpt to specify that the last error reported by +// the endpoint should be cleared and returned. +type ErrorOption struct{} // BindToDeviceOption is used by SetSockOpt/GetSockOpt to specify that sockets // should bind only on a specific NIC. -type BindToDeviceOption string - -// QuickAckOption is stubbed out in SetSockOpt/GetSockOpt. -type QuickAckOption int - -// PasscredOption is used by SetSockOpt/GetSockOpt to specify whether -// SCM_CREDENTIALS socket control messages are enabled. -// -// Only supported on Unix sockets. -type PasscredOption int +type BindToDeviceOption NICID // TCPInfoOption is used by GetSockOpt to expose TCP statistics. // @@ -539,10 +855,6 @@ type TCPInfoOption struct { RTTVar time.Duration } -// KeepaliveEnabledOption is used by SetSockOpt/GetSockOpt to specify whether -// TCP keepalive is enabled for this socket. -type KeepaliveEnabledOption int - // KeepaliveIdleOption is used by SetSockOpt/GetSockOpt to specify the time a // connection must remain idle before the first TCP keepalive packet is sent. // Once this time is reached, KeepaliveIntervalOption is used instead. @@ -552,10 +864,10 @@ type KeepaliveIdleOption time.Duration // interval between sending TCP keepalive packets. type KeepaliveIntervalOption time.Duration -// KeepaliveCountOption is used by SetSockOpt/GetSockOpt to specify the number -// of un-ACKed TCP keepalives that will be sent before the connection is -// closed. -type KeepaliveCountOption int +// TCPUserTimeoutOption is used by SetSockOpt/GetSockOpt to specify a user +// specified timeout for a given TCP connection. +// See: RFC5482 for details. +type TCPUserTimeoutOption time.Duration // CongestionControlOption is used by SetSockOpt/GetSockOpt to set/get // the current congestion control algorithm. @@ -565,23 +877,45 @@ type CongestionControlOption string // control algorithms. type AvailableCongestionControlOption string -// ModerateReceiveBufferOption allows the caller to enable/disable TCP receive -// buffer moderation. +// ModerateReceiveBufferOption is used by buffer moderation. type ModerateReceiveBufferOption bool -// MaxSegOption is used by SetSockOpt/GetSockOpt to set/get the current -// Maximum Segment Size(MSS) value as specified using the TCP_MAXSEG option. -type MaxSegOption int +// TCPLingerTimeoutOption is used by SetSockOpt/GetSockOpt to set/get the +// maximum duration for which a socket lingers in the TCP_FIN_WAIT_2 state +// before being marked closed. +type TCPLingerTimeoutOption time.Duration -// TTLOption is used by SetSockOpt/GetSockOpt to control the default TTL/hop -// limit value for unicast messages. The default is protocol specific. -// -// A zero value indicates the default. -type TTLOption uint8 +// TCPTimeWaitTimeoutOption is used by SetSockOpt/GetSockOpt to set/get the +// maximum duration for which a socket lingers in the TIME_WAIT state +// before being marked closed. +type TCPTimeWaitTimeoutOption time.Duration + +// TCPDeferAcceptOption is used by SetSockOpt/GetSockOpt to allow a +// accept to return a completed connection only when there is data to be +// read. This usually means the listening socket will drop the final ACK +// for a handshake till the specified timeout until a segment with data arrives. +type TCPDeferAcceptOption time.Duration + +// TCPMinRTOOption is use by SetSockOpt/GetSockOpt to allow overriding +// default MinRTO used by the Stack. +type TCPMinRTOOption time.Duration + +// TCPMaxRTOOption is use by SetSockOpt/GetSockOpt to allow overriding +// default MaxRTO used by the Stack. +type TCPMaxRTOOption time.Duration -// MulticastTTLOption is used by SetSockOpt/GetSockOpt to control the default -// TTL value for multicast messages. The default is 1. -type MulticastTTLOption uint8 +// TCPMaxRetriesOption is used by SetSockOpt/GetSockOpt to set/get the +// maximum number of retransmits after which we time out the connection. +type TCPMaxRetriesOption uint64 + +// TCPSynRcvdCountThresholdOption is used by SetSockOpt/GetSockOpt to specify +// the number of endpoints that can be in SYN-RCVD state before the stack +// switches to using SYN cookies. +type TCPSynRcvdCountThresholdOption uint64 + +// TCPSynRetriesOption is used by SetSockOpt/GetSockOpt to specify stack-wide +// default for number of times SYN is retransmitted before aborting a connect. +type TCPSynRetriesOption uint8 // MulticastInterfaceOption is used by SetSockOpt/GetSockOpt to specify a // default interface for multicast. @@ -590,10 +924,6 @@ type MulticastInterfaceOption struct { InterfaceAddr Address } -// MulticastLoopOption is used by SetSockOpt/GetSockOpt to specify whether -// multicast packets sent over a non-loopback interface will be looped back. -type MulticastLoopOption bool - // MembershipOption is used by SetSockOpt/GetSockOpt as an argument to // AddMembershipOption and RemoveMembershipOption. type MembershipOption struct { @@ -616,21 +946,51 @@ type RemoveMembershipOption MembershipOption // TCP out-of-band data is delivered along with the normal in-band data. type OutOfBandInlineOption int -// BroadcastOption is used by SetSockOpt/GetSockOpt to specify whether -// datagram sockets are allowed to send packets to a broadcast address. -type BroadcastOption int - // DefaultTTLOption is used by stack.(*Stack).NetworkProtocolOption to specify // a default TTL. type DefaultTTLOption uint8 -// IPv4TOSOption is used by SetSockOpt/GetSockOpt to specify TOS -// for all subsequent outgoing IPv4 packets from the endpoint. -type IPv4TOSOption uint8 +// SocketDetachFilterOption is used by SetSockOpt to detach a previously attached +// classic BPF filter on a given endpoint. +type SocketDetachFilterOption int + +// OriginalDestinationOption is used to get the original destination address +// and port of a redirected packet. +type OriginalDestinationOption FullAddress + +// TCPTimeWaitReuseOption is used stack.(*Stack).TransportProtocolOption to +// specify if the stack can reuse the port bound by an endpoint in TIME-WAIT for +// new connections when it is safe from protocol viewpoint. +type TCPTimeWaitReuseOption uint8 + +const ( + // TCPTimeWaitReuseDisabled indicates reuse of port bound by endponts in TIME-WAIT cannot + // be reused for new connections. + TCPTimeWaitReuseDisabled TCPTimeWaitReuseOption = iota + + // TCPTimeWaitReuseGlobal indicates reuse of port bound by endponts in TIME-WAIT can + // be reused for new connections irrespective of the src/dest addresses. + TCPTimeWaitReuseGlobal + + // TCPTimeWaitReuseLoopbackOnly indicates reuse of port bound by endpoint in TIME-WAIT can + // only be reused if the connection was a connection over loopback. i.e src/dest adddresses + // are loopback addresses. + TCPTimeWaitReuseLoopbackOnly +) + +// IPPacketInfo is the message structure for IP_PKTINFO. +// +// +stateify savable +type IPPacketInfo struct { + // NIC is the ID of the NIC to be used. + NIC NICID + + // LocalAddr is the local address. + LocalAddr Address -// IPv6TrafficClassOption is used by SetSockOpt/GetSockOpt to specify TOS -// for all subsequent outgoing IPv6 packets from the endpoint. -type IPv6TrafficClassOption uint8 + // DestinationAddr is the destination address found in the IP header. + DestinationAddr Address +} // Route is a row in the routing table. It specifies through which NIC (and // gateway) sets of packets should be routed. A row is considered viable if the @@ -852,9 +1212,13 @@ type IPStats struct { // link layer in nic.DeliverNetworkPacket. PacketsReceived *StatCounter - // InvalidAddressesReceived is the total number of IP packets received - // with an unknown or invalid destination address. - InvalidAddressesReceived *StatCounter + // InvalidDestinationAddressesReceived is the total number of IP packets + // received with an unknown or invalid destination address. + InvalidDestinationAddressesReceived *StatCounter + + // InvalidSourceAddressesReceived is the total number of IP packets received + // with a source address that should never have been received on the wire. + InvalidSourceAddressesReceived *StatCounter // PacketsDelivered is the total number of incoming IP packets that // are successfully delivered to the transport layer via HandlePacket. @@ -887,14 +1251,26 @@ type TCPStats struct { PassiveConnectionOpenings *StatCounter // CurrentEstablished is the number of TCP connections for which the - // current state is either ESTABLISHED or CLOSE-WAIT. + // current state is ESTABLISHED. CurrentEstablished *StatCounter + // CurrentConnected is the number of TCP connections that + // are in connected state. + CurrentConnected *StatCounter + // EstablishedResets is the number of times TCP connections have made // a direct transition to the CLOSED state from either the // ESTABLISHED state or the CLOSE-WAIT state. EstablishedResets *StatCounter + // EstablishedClosed is the number of times established TCP connections + // made a transition to CLOSED state. + EstablishedClosed *StatCounter + + // EstablishedTimedout is the number of times an established connection + // was reset because of keep-alive time out. + EstablishedTimedout *StatCounter + // ListenOverflowSynDrop is the number of times the listen queue overflowed // and a SYN was dropped. ListenOverflowSynDrop *StatCounter @@ -987,6 +1363,12 @@ type UDPStats struct { // PacketSendErrors is the number of datagrams failed to be sent. PacketSendErrors *StatCounter + + // ChecksumErrors is the number of datagrams dropped due to bad checksums. + ChecksumErrors *StatCounter + + // InvalidSourceAddress is the number of invalid sourced datagrams dropped. + InvalidSourceAddress *StatCounter } // Stats holds statistics about the networking stack. @@ -1030,6 +1412,9 @@ type ReceiveErrors struct { // ClosedReceiver is the number of received packets dropped because // of receiving endpoint state being closed. ClosedReceiver StatCounter + + // ChecksumErrors is the number of packets dropped due to bad checksums. + ChecksumErrors StatCounter } // SendErrors collects packet send errors within the transport layer for @@ -1055,6 +1440,10 @@ type ReadErrors struct { // InvalidEndpointState is the number of times we found the endpoint state // to be unexpected. InvalidEndpointState StatCounter + + // NotConnected is the number of times we tried to read but found that the + // endpoint was not connected. + NotConnected StatCounter } // WriteErrors collects packet write errors from an endpoint write call. @@ -1097,7 +1486,9 @@ type TransportEndpointStats struct { // marker interface. func (*TransportEndpointStats) IsEndpointStats() {} -func fillIn(v reflect.Value) { +// InitStatCounters initializes v's fields with nil StatCounter fields to new +// StatCounters. +func InitStatCounters(v reflect.Value) { for i := 0; i < v.NumField(); i++ { v := v.Field(i) if s, ok := v.Addr().Interface().(**StatCounter); ok { @@ -1105,14 +1496,14 @@ func fillIn(v reflect.Value) { *s = new(StatCounter) } } else { - fillIn(v) + InitStatCounters(v) } } } // FillIn returns a copy of s with nil fields initialized to new StatCounters. func (s Stats) FillIn() Stats { - fillIn(reflect.ValueOf(&s).Elem()) + InitStatCounters(reflect.ValueOf(&s).Elem()) return s } @@ -1322,8 +1713,8 @@ var ( // GetDanglingEndpoints returns all dangling endpoints. func GetDanglingEndpoints() []Endpoint { - es := make([]Endpoint, 0, len(danglingEndpoints)) danglingEndpointsMu.Lock() + es := make([]Endpoint, 0, len(danglingEndpoints)) for e := range danglingEndpoints { es = append(es, e) } |