7 files changed, 3 insertions, 541 deletions
diff --git a/pkg/tcpip/link/sharedmem/pipe/BUILD b/pkg/tcpip/link/sharedmem/pipe/BUILD
deleted file mode 100644
index 87020ec08..000000000
--- a/pkg/tcpip/link/sharedmem/pipe/BUILD
+++ /dev/null
@@ -1,23 +0,0 @@
-load("//tools:defs.bzl", "go_library", "go_test")
-
-package(licenses = ["notice"])
-
-go_library(
-    name = "pipe",
-    srcs = [
-        "pipe.go",
-        "pipe_unsafe.go",
-        "rx.go",
-        "tx.go",
-    ],
-    visibility = ["//visibility:public"],
-)
-
-go_test(
-    name = "pipe_test",
-    srcs = [
-        "pipe_test.go",
-    ],
-    library = ":pipe",
-    deps = ["//pkg/sync"],
-)
diff --git a/pkg/tcpip/link/sharedmem/pipe/pipe.go b/pkg/tcpip/link/sharedmem/pipe/pipe.go
index 74c9f0311..74c9f0311 100644..100755
--- a/pkg/tcpip/link/sharedmem/pipe/pipe.go
+++ b/pkg/tcpip/link/sharedmem/pipe/pipe.go
diff --git a/pkg/tcpip/link/sharedmem/pipe/pipe_state_autogen.go b/pkg/tcpip/link/sharedmem/pipe/pipe_state_autogen.go
new file mode 100755
index 000000000..d3b40feb4
--- /dev/null
+++ b/pkg/tcpip/link/sharedmem/pipe/pipe_state_autogen.go
@@ -0,0 +1,3 @@
+// automatically generated by stateify.
+
+package pipe
diff --git a/pkg/tcpip/link/sharedmem/pipe/pipe_test.go b/pkg/tcpip/link/sharedmem/pipe/pipe_test.go
deleted file mode 100644
index dc239a0d0..000000000
--- a/pkg/tcpip/link/sharedmem/pipe/pipe_test.go
+++ /dev/null
@@ -1,518 +0,0 @@
-// Copyright 2018 The gVisor Authors.
-//
-// Licensed under the Apache License, Version 2.0 (the "License");
-// you may not use this file except in compliance with the License.
-// You may obtain a copy of the License at
-//
-//     http://www.apache.org/licenses/LICENSE-2.0
-//
-// Unless required by applicable law or agreed to in writing, software
-// distributed under the License is distributed on an "AS IS" BASIS,
-// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-// See the License for the specific language governing permissions and
-// limitations under the License.
-
-package pipe
-
-import (
-	"math/rand"
-	"reflect"
-	"runtime"
-	"testing"
-
-	"gvisor.dev/gvisor/pkg/sync"
-)
-
-func TestSimpleReadWrite(t *testing.T) {
-	// Check that a simple write can be properly read from the rx side.
-	tr := rand.New(rand.NewSource(99))
-	rr := rand.New(rand.NewSource(99))
-
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	wb := tx.Push(10)
-	if wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	for i := range wb {
-		wb[i] = byte(tr.Intn(256))
-	}
-	tx.Flush()
-
-	var rx Rx
-	rx.Init(b)
-	rb := rx.Pull()
-	if len(rb) != 10 {
-		t.Fatalf("Bad buffer size returned: got %v, want %v", len(rb), 10)
-	}
-
-	for i := range rb {
-		if v := byte(rr.Intn(256)); v != rb[i] {
-			t.Fatalf("Bad read buffer at index %v: got %v, want %v", i, rb[i], v)
-		}
-	}
-	rx.Flush()
-}
-
-func TestEmptyRead(t *testing.T) {
-	// Check that pulling from an empty pipe fails.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on empty pipe")
-	}
-}
-
-func TestTooLargeWrite(t *testing.T) {
-	// Check that writes that are too large are properly rejected.
-	b := make([]byte, 96)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(96); wb != nil {
-		t.Fatalf("Write of 96 bytes succeeded on 96-byte pipe")
-	}
-
-	if wb := tx.Push(88); wb != nil {
-		t.Fatalf("Write of 88 bytes succeeded on 96-byte pipe")
-	}
-
-	if wb := tx.Push(80); wb == nil {
-		t.Fatalf("Write of 80 bytes failed on 96-byte pipe")
-	}
-}
-
-func TestFullWrite(t *testing.T) {
-	// Check that writes fail when the pipe is full.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(80); wb == nil {
-		t.Fatalf("Write of 80 bytes failed on 96-byte pipe")
-	}
-
-	if wb := tx.Push(1); wb != nil {
-		t.Fatalf("Write succeeded on full pipe")
-	}
-}
-
-func TestFullAndFlushedWrite(t *testing.T) {
-	// Check that writes fail when the pipe is full and has already been
-	// flushed.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(80); wb == nil {
-		t.Fatalf("Write of 80 bytes failed on 96-byte pipe")
-	}
-
-	tx.Flush()
-
-	if wb := tx.Push(1); wb != nil {
-		t.Fatalf("Write succeeded on full pipe")
-	}
-}
-
-func TestTxFlushTwice(t *testing.T) {
-	// Checks that a second consecutive tx flush is a no-op.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	// Make copy of original tx queue, flush it, then check that it didn't
-	// change.
-	orig := tx
-	tx.Flush()
-
-	if !reflect.DeepEqual(orig, tx) {
-		t.Fatalf("Flush mutated tx pipe: got %v, want %v", tx, orig)
-	}
-}
-
-func TestRxFlushTwice(t *testing.T) {
-	// Checks that a second consecutive rx flush is a no-op.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-	rx.Flush()
-
-	// Make copy of original rx queue, flush it, then check that it didn't
-	// change.
-	orig := rx
-	rx.Flush()
-
-	if !reflect.DeepEqual(orig, rx) {
-		t.Fatalf("Flush mutated rx pipe: got %v, want %v", rx, orig)
-	}
-}
-
-func TestWrapInMiddleOfTransaction(t *testing.T) {
-	// Check that writes are not flushed when we need to wrap the buffer
-	// around.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-	rx.Flush()
-
-	// At this point the ring buffer is empty, but the write is at offset
-	// 64 (50 + sizeOfSlotHeader + padding-for-8-byte-alignment).
-	if wb := tx.Push(10); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on non-full pipe")
-	}
-
-	// We haven't flushed yet, so pull must return nil.
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on non-flushed pipe")
-	}
-
-	tx.Flush()
-
-	// The two buffers must be available now.
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-}
-
-func TestWriteAbort(t *testing.T) {
-	// Check that a read fails on a pipe that has had data pushed to it but
-	// has aborted the push.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(10); wb == nil {
-		t.Fatalf("Write failed on empty pipe")
-	}
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on empty pipe")
-	}
-
-	tx.Abort()
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on empty pipe")
-	}
-}
-
-func TestWrappedWriteAbort(t *testing.T) {
-	// Check that writes are properly aborted even if the writes wrap
-	// around.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-	rx.Flush()
-
-	// At this point the ring buffer is empty, but the write is at offset
-	// 64 (50 + sizeOfSlotHeader + padding-for-8-byte-alignment).
-	if wb := tx.Push(10); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on non-full pipe")
-	}
-
-	// We haven't flushed yet, so pull must return nil.
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on non-flushed pipe")
-	}
-
-	tx.Abort()
-
-	// The pushes were aborted, so no data should be readable.
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on non-flushed pipe")
-	}
-
-	// Try the same transactions again, but flush this time.
-	if wb := tx.Push(10); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on non-full pipe")
-	}
-
-	tx.Flush()
-
-	// The two buffers must be available now.
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-}
-
-func TestEmptyReadOnNonFlushedWrite(t *testing.T) {
-	// Check that a read fails on a pipe that has had data pushed to it
-	// but not yet flushed.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(10); wb == nil {
-		t.Fatalf("Write failed on empty pipe")
-	}
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on empty pipe")
-	}
-
-	tx.Flush()
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull on failed on non-empty pipe")
-	}
-}
-
-func TestPullAfterPullingEntirePipe(t *testing.T) {
-	// Check that Pull fails when the pipe is full, but all of it has
-	// already been pulled but not yet flushed.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-	rx.Flush()
-
-	// At this point the ring buffer is empty, but the write is at offset
-	// 64 (50 + sizeOfSlotHeader + padding-for-8-byte-alignment). Write 3
-	// buffers that will fill the pipe.
-	if wb := tx.Push(10); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-
-	if wb := tx.Push(20); wb == nil {
-		t.Fatalf("Push failed on non-full pipe")
-	}
-
-	if wb := tx.Push(24); wb == nil {
-		t.Fatalf("Push failed on non-full pipe")
-	}
-
-	tx.Flush()
-
-	// The three buffers must be available now.
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-
-	// Fourth pull must fail.
-	if rb := rx.Pull(); rb != nil {
-		t.Fatalf("Pull succeeded on empty pipe")
-	}
-}
-
-func TestNoRoomToWrapOnPush(t *testing.T) {
-	// Check that Push fails when it tries to allocate room to add a wrap
-	// message.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	var rx Rx
-	rx.Init(b)
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-	rx.Flush()
-
-	// At this point the ring buffer is empty, but the write is at offset
-	// 64 (50 + sizeOfSlotHeader + padding-for-8-byte-alignment). Write 20,
-	// which won't fit (64+20+8+padding = 96, which wouldn't leave room for
-	// the padding), so it wraps around.
-	if wb := tx.Push(20); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-
-	tx.Flush()
-
-	// Buffer offset is at 28. Try to write 70, which would require a wrap
-	// slot which cannot be created now.
-	if wb := tx.Push(70); wb != nil {
-		t.Fatalf("Push succeeded on pipe with no room for wrap message")
-	}
-}
-
-func TestRxImplicitFlushOfWrapMessage(t *testing.T) {
-	// Check if the first read is that of a wrapping message, that it gets
-	// immediately flushed.
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	if wb := tx.Push(50); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-	tx.Flush()
-
-	// This will cause a wrapping message to written.
-	if wb := tx.Push(60); wb != nil {
-		t.Fatalf("Push succeeded when there is no room in pipe")
-	}
-
-	var rx Rx
-	rx.Init(b)
-
-	// Read the first message.
-	if rb := rx.Pull(); rb == nil {
-		t.Fatalf("Pull failed on non-empty pipe")
-	}
-	rx.Flush()
-
-	// This should fail because of the wrapping message is taking up space.
-	if wb := tx.Push(60); wb != nil {
-		t.Fatalf("Push succeeded when there is no room in pipe")
-	}
-
-	// Try to read the next one. This should consume the wrapping message.
-	rx.Pull()
-
-	// This must now succeed.
-	if wb := tx.Push(60); wb == nil {
-		t.Fatalf("Push failed on empty pipe")
-	}
-}
-
-func TestConcurrentReaderWriter(t *testing.T) {
-	// Push a million buffers of random sizes and random contents. Check
-	// that buffers read match what was written.
-	tr := rand.New(rand.NewSource(99))
-	rr := rand.New(rand.NewSource(99))
-
-	b := make([]byte, 100)
-	var tx Tx
-	tx.Init(b)
-
-	var rx Rx
-	rx.Init(b)
-
-	const count = 1000000
-	var wg sync.WaitGroup
-	wg.Add(1)
-	go func() {
-		defer wg.Done()
-		runtime.Gosched()
-		for i := 0; i < count; i++ {
-			n := 1 + tr.Intn(80)
-			wb := tx.Push(uint64(n))
-			for wb == nil {
-				wb = tx.Push(uint64(n))
-			}
-
-			for j := range wb {
-				wb[j] = byte(tr.Intn(256))
-			}
-
-			tx.Flush()
-		}
-	}()
-
-	wg.Add(1)
-	go func() {
-		defer wg.Done()
-		runtime.Gosched()
-		for i := 0; i < count; i++ {
-			n := 1 + rr.Intn(80)
-			rb := rx.Pull()
-			for rb == nil {
-				rb = rx.Pull()
-			}
-
-			if n != len(rb) {
-				t.Fatalf("Bad %v-th buffer length: got %v, want %v", i, len(rb), n)
-			}
-
-			for j := range rb {
-				if v := byte(rr.Intn(256)); v != rb[j] {
-					t.Fatalf("Bad %v-th read buffer at index %v: got %v, want %v", i, j, rb[j], v)
-				}
-			}
-
-			rx.Flush()
-		}
-	}()
-
-	wg.Wait()
-}
diff --git a/pkg/tcpip/link/sharedmem/pipe/pipe_unsafe.go b/pkg/tcpip/link/sharedmem/pipe/pipe_unsafe.go
index 62d17029e..62d17029e 100644..100755
--- a/pkg/tcpip/link/sharedmem/pipe/pipe_unsafe.go
+++ b/pkg/tcpip/link/sharedmem/pipe/pipe_unsafe.go
diff --git a/pkg/tcpip/link/sharedmem/pipe/rx.go b/pkg/tcpip/link/sharedmem/pipe/rx.go
index f22e533ac..f22e533ac 100644..100755
--- a/pkg/tcpip/link/sharedmem/pipe/rx.go
+++ b/pkg/tcpip/link/sharedmem/pipe/rx.go
diff --git a/pkg/tcpip/link/sharedmem/pipe/tx.go b/pkg/tcpip/link/sharedmem/pipe/tx.go
index 9841eb231..9841eb231 100644..100755
--- a/pkg/tcpip/link/sharedmem/pipe/tx.go
+++ b/pkg/tcpip/link/sharedmem/pipe/tx.go