diff options
Diffstat (limited to 'pkg/sentry/platform/safecopy')
| -rw-r--r-- | pkg/sentry/platform/safecopy/BUILD | 4 | ||||
| -rw-r--r-- | pkg/sentry/platform/safecopy/atomic_arm64.s | 98 | ||||
| -rw-r--r-- | pkg/sentry/platform/safecopy/memclr_arm64.s | 74 | ||||
| -rw-r--r-- | pkg/sentry/platform/safecopy/memcpy_arm64.s | 78 | ||||
| -rw-r--r-- | pkg/sentry/platform/safecopy/sighandler_arm64.s | 132 |
5 files changed, 386 insertions, 0 deletions
diff --git a/pkg/sentry/platform/safecopy/BUILD b/pkg/sentry/platform/safecopy/BUILD index ee58a805e..cb8347dd8 100644 --- a/pkg/sentry/platform/safecopy/BUILD +++ b/pkg/sentry/platform/safecopy/BUILD @@ -6,11 +6,15 @@ go_library( name = "safecopy", srcs = [ "atomic_amd64.s", + "atomic_arm64.s", "memclr_amd64.s", + "memclr_arm64.s", "memcpy_amd64.s", + "memcpy_arm64.s", "safecopy.go", "safecopy_unsafe.go", "sighandler_amd64.s", + "sighandler_arm64.s", ], importpath = "gvisor.googlesource.com/gvisor/pkg/sentry/platform/safecopy", visibility = ["//pkg/sentry:internal"], diff --git a/pkg/sentry/platform/safecopy/atomic_arm64.s b/pkg/sentry/platform/safecopy/atomic_arm64.s new file mode 100644 index 000000000..554a5c1e1 --- /dev/null +++ b/pkg/sentry/platform/safecopy/atomic_arm64.s @@ -0,0 +1,98 @@ +// Copyright 2014 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +#include "textflag.h" + +// handleSwapUint32Fault returns the value stored in R1. Control is transferred +// to it when swapUint32 below receives SIGSEGV or SIGBUS, with the signal +// number stored in R1. +// +// It must have the same frame configuration as swapUint32 so that it can undo +// any potential call frame set up by the assembler. +TEXT handleSwapUint32Fault(SB), NOSPLIT, $0-24 + MOVW R1, sig+20(FP) + RET + +// See the corresponding doc in safecopy_unsafe.go +// +// The code is derived from Go source runtime/internal/atomic.Xchg. +// +//func swapUint32(ptr unsafe.Pointer, new uint32) (old uint32, sig int32) +TEXT ·swapUint32(SB), NOSPLIT, $0-24 + // Store 0 as the returned signal number. If we run to completion, + // this is the value the caller will see; if a signal is received, + // handleSwapUint32Fault will store a different value in this address. + MOVW $0, sig+20(FP) +again: + MOVD addr+0(FP), R0 + MOVW new+8(FP), R1 + LDAXRW (R0), R2 + STLXRW R1, (R0), R3 + CBNZ R3, again + MOVW R2, old+16(FP) + RET + +// handleSwapUint64Fault returns the value stored in R1. Control is transferred +// to it when swapUint64 below receives SIGSEGV or SIGBUS, with the signal +// number stored in R1. +// +// It must have the same frame configuration as swapUint64 so that it can undo +// any potential call frame set up by the assembler. +TEXT handleSwapUint64Fault(SB), NOSPLIT, $0-28 + MOVW R1, sig+24(FP) + RET + +// See the corresponding doc in safecopy_unsafe.go +// +// The code is derived from Go source runtime/internal/atomic.Xchg64. +// +//func swapUint64(ptr unsafe.Pointer, new uint64) (old uint64, sig int32) +TEXT ·swapUint64(SB), NOSPLIT, $0-28 + // Store 0 as the returned signal number. If we run to completion, + // this is the value the caller will see; if a signal is received, + // handleSwapUint64Fault will store a different value in this address. + MOVW $0, sig+24(FP) +again: + MOVD addr+0(FP), R0 + MOVD new+8(FP), R1 + LDAXR (R0), R2 + STLXR R1, (R0), R3 + CBNZ R3, again + MOVD R2, old+16(FP) + RET + +// handleCompareAndSwapUint32Fault returns the value stored in R1. Control is +// transferred to it when compareAndSwapUint32 below receives SIGSEGV or SIGBUS, +// with the signal number stored in R1. +// +// It must have the same frame configuration as compareAndSwapUint32 so that it +// can undo any potential call frame set up by the assembler. +TEXT handleCompareAndSwapUint32Fault(SB), NOSPLIT, $0-24 + MOVW R1, sig+20(FP) + RET + +// See the corresponding doc in safecopy_unsafe.go +// +// The code is derived from Go source runtime/internal/atomic.Cas. +// +//func compareAndSwapUint32(ptr unsafe.Pointer, old, new uint32) (prev uint32, sig int32) +TEXT ·compareAndSwapUint32(SB), NOSPLIT, $0-24 + // Store 0 as the returned signal number. If we run to completion, this is + // the value the caller will see; if a signal is received, + // handleCompareAndSwapUint32Fault will store a different value in this + // address. + MOVW $0, sig+20(FP) + + MOVD addr+0(FP), R0 + MOVW old+8(FP), R1 + MOVW new+12(FP), R2 +again: + LDAXRW (R0), R3 + CMPW R1, R3 + BNE done + STLXRW R2, (R0), R4 + CBNZ R4, again +done: + MOVW R3, prev+16(FP) + RET diff --git a/pkg/sentry/platform/safecopy/memclr_arm64.s b/pkg/sentry/platform/safecopy/memclr_arm64.s new file mode 100644 index 000000000..7361b9067 --- /dev/null +++ b/pkg/sentry/platform/safecopy/memclr_arm64.s @@ -0,0 +1,74 @@ +// Copyright 2014 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +#include "textflag.h" + +// handleMemclrFault returns (the value stored in R0, the value stored in R1). +// Control is transferred to it when memclr below receives SIGSEGV or SIGBUS, +// with the faulting address stored in R0 and the signal number stored in R1. +// +// It must have the same frame configuration as memclr so that it can undo any +// potential call frame set up by the assembler. +TEXT handleMemclrFault(SB), NOSPLIT, $0-28 + MOVD R0, addr+16(FP) + MOVW R1, sig+24(FP) + RET + +// See the corresponding doc in safecopy_unsafe.go +// +// The code is derived from runtime.memclrNoHeapPointers. +// +// func memclr(ptr unsafe.Pointer, n uintptr) (fault unsafe.Pointer, sig int32) +TEXT ·memclr(SB), NOSPLIT, $0-28 + // Store 0 as the returned signal number. If we run to completion, + // this is the value the caller will see; if a signal is received, + // handleMemclrFault will store a different value in this address. + MOVW $0, sig+24(FP) + MOVD ptr+0(FP), R0 + MOVD n+8(FP), R1 + + // If size is less than 16 bytes, use tail_zero to zero what remains + CMP $16, R1 + BLT tail_zero + // Get buffer offset into 16 byte aligned address for better performance + ANDS $15, R0, ZR + BNE unaligned_to_16 +aligned_to_16: + LSR $4, R1, R2 +zero_by_16: + STP.P (ZR, ZR), 16(R0) // Store pair with post index. + SUBS $1, R2, R2 + BNE zero_by_16 + ANDS $15, R1, R1 + BEQ end + + // Zero buffer with size=R1 < 16 +tail_zero: + TBZ $3, R1, tail_zero_4 + MOVD.P ZR, 8(R0) +tail_zero_4: + TBZ $2, R1, tail_zero_2 + MOVW.P ZR, 4(R0) +tail_zero_2: + TBZ $1, R1, tail_zero_1 + MOVH.P ZR, 2(R0) +tail_zero_1: + TBZ $0, R1, end + MOVB ZR, (R0) +end: + RET + +unaligned_to_16: + MOVD R0, R2 +head_loop: + MOVBU.P ZR, 1(R0) + ANDS $15, R0, ZR + BNE head_loop + // Adjust length for what remains + SUB R2, R0, R3 + SUB R3, R1 + // If size is less than 16 bytes, use tail_zero to zero what remains + CMP $16, R1 + BLT tail_zero + B aligned_to_16 diff --git a/pkg/sentry/platform/safecopy/memcpy_arm64.s b/pkg/sentry/platform/safecopy/memcpy_arm64.s new file mode 100644 index 000000000..e7e541565 --- /dev/null +++ b/pkg/sentry/platform/safecopy/memcpy_arm64.s @@ -0,0 +1,78 @@ +// Copyright 2014 The Go Authors. All rights reserved. +// Use of this source code is governed by a BSD-style +// license that can be found in the LICENSE file. + +#include "textflag.h" + +// handleMemcpyFault returns (the value stored in R0, the value stored in R1). +// Control is transferred to it when memcpy below receives SIGSEGV or SIGBUS, +// with the faulting address stored in R0 and the signal number stored in R1. +// +// It must have the same frame configuration as memcpy so that it can undo any +// potential call frame set up by the assembler. +TEXT handleMemcpyFault(SB), NOSPLIT, $0-36 + MOVD R0, addr+24(FP) + MOVW R1, sig+32(FP) + RET + +// memcpy copies data from src to dst. If a SIGSEGV or SIGBUS signal is received +// during the copy, it returns the address that caused the fault and the number +// of the signal that was received. Otherwise, it returns an unspecified address +// and a signal number of 0. +// +// Data is copied in order, such that if a fault happens at address p, it is +// safe to assume that all data before p-maxRegisterSize has already been +// successfully copied. +// +// The code is derived from the Go source runtime.memmove. +// +// func memcpy(dst, src unsafe.Pointer, n uintptr) (fault unsafe.Pointer, sig int32) +TEXT ·memcpy(SB), NOSPLIT, $-8-36 + // Store 0 as the returned signal number. If we run to completion, + // this is the value the caller will see; if a signal is received, + // handleMemcpyFault will store a different value in this address. + MOVW $0, sig+32(FP) + + MOVD to+0(FP), R3 + MOVD from+8(FP), R4 + MOVD n+16(FP), R5 + CMP $0, R5 + BNE check + RET + +check: + AND $~7, R5, R7 // R7 is N&~7. + SUB R7, R5, R6 // R6 is N&7. + + // Copying forward proceeds by copying R7/8 words then copying R6 bytes. + // R3 and R4 are advanced as we copy. + + // (There may be implementations of armv8 where copying by bytes until + // at least one of source or dest is word aligned is a worthwhile + // optimization, but the on the one tested so far (xgene) it did not + // make a significance difference.) + + CMP $0, R7 // Do we need to do any word-by-word copying? + BEQ noforwardlarge + ADD R3, R7, R9 // R9 points just past where we copy by word. + +forwardlargeloop: + MOVD.P 8(R4), R8 // R8 is just a scratch register. + MOVD.P R8, 8(R3) + CMP R3, R9 + BNE forwardlargeloop + +noforwardlarge: + CMP $0, R6 // Do we need to do any byte-by-byte copying? + BNE forwardtail + RET + +forwardtail: + ADD R3, R6, R9 // R9 points just past the destination memory. + +forwardtailloop: + MOVBU.P 1(R4), R8 + MOVBU.P R8, 1(R3) + CMP R3, R9 + BNE forwardtailloop + RET diff --git a/pkg/sentry/platform/safecopy/sighandler_arm64.s b/pkg/sentry/platform/safecopy/sighandler_arm64.s new file mode 100644 index 000000000..5e8e193e7 --- /dev/null +++ b/pkg/sentry/platform/safecopy/sighandler_arm64.s @@ -0,0 +1,132 @@ +// Copyright 2018 Google LLC +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#include "textflag.h" + +// The signals handled by sigHandler. +#define SIGBUS 7 +#define SIGSEGV 11 + +// Offsets to the registers in context->uc_mcontext.gregs[]. +#define REG_R0 0xB8 +#define REG_R1 0xC0 +#define REG_PC 0x1B8 + +// Offset to the si_addr field of siginfo. +#define SI_CODE 0x08 +#define SI_ADDR 0x10 + +// signalHandler is the signal handler for SIGSEGV and SIGBUS signals. It must +// not be set up as a handler to any other signals. +// +// If the instruction causing the signal is within a safecopy-protected +// function, the signal is handled such that execution resumes in the +// appropriate fault handling stub with R0 containing the faulting address and +// R1 containing the signal number. Otherwise control is transferred to the +// previously configured signal handler (savedSigSegvHandler or +// savedSigBusHandler). +// +// This function cannot be written in go because it runs whenever a signal is +// received by the thread (preempting whatever was running), which includes when +// garbage collector has stopped or isn't expecting any interactions (like +// barriers). +// +// The arguments are the following: +// R0 - The signal number. +// R1 - Pointer to siginfo_t structure. +// R2 - Pointer to ucontext structure. +TEXT ·signalHandler(SB),NOSPLIT,$0 + // Check if the signal is from the kernel, si_code > 0 means a kernel signal. + MOVD SI_CODE(R1), R7 + CMPW $0x0, R7 + BLE original_handler + + // Check if PC is within the area we care about. + MOVD REG_PC(R2), R7 + MOVD ·memcpyBegin(SB), R8 + CMP R8, R7 + BLO not_memcpy + MOVD ·memcpyEnd(SB), R8 + CMP R8, R7 + BHS not_memcpy + + // Modify the context such that execution will resume in the fault handler. + MOVD $handleMemcpyFault(SB), R7 + B handle_fault + +not_memcpy: + MOVD ·memclrBegin(SB), R8 + CMP R8, R7 + BLO not_memclr + MOVD ·memclrEnd(SB), R8 + CMP R8, R7 + BHS not_memclr + + MOVD $handleMemclrFault(SB), R7 + B handle_fault + +not_memclr: + MOVD ·swapUint32Begin(SB), R8 + CMP R8, R7 + BLO not_swapuint32 + MOVD ·swapUint32End(SB), R8 + CMP R8, R7 + BHS not_swapuint32 + + MOVD $handleSwapUint32Fault(SB), R7 + B handle_fault + +not_swapuint32: + MOVD ·swapUint64Begin(SB), R8 + CMP R8, R7 + BLO not_swapuint64 + MOVD ·swapUint64End(SB), R8 + CMP R8, R7 + BHS not_swapuint64 + + MOVD $handleSwapUint64Fault(SB), R7 + B handle_fault + +not_swapuint64: + MOVD ·compareAndSwapUint32Begin(SB), R8 + CMP R8, R7 + BLO not_casuint32 + MOVD ·compareAndSwapUint32End(SB), R8 + CMP R8, R7 + BHS not_casuint32 + + MOVD $handleCompareAndSwapUint32Fault(SB), R7 + B handle_fault + +not_casuint32: +original_handler: + // Jump to the previous signal handler, which is likely the golang one. + MOVD ·savedSigBusHandler(SB), R7 + MOVD ·savedSigSegVHandler(SB), R8 + CMPW $SIGSEGV, R0 + CSEL EQ, R8, R7, R7 + B (R7) + +handle_fault: + // Entered with the address of the fault handler in R7; store it in PC. + MOVD R7, REG_PC(R2) + + // Store the faulting address in R0. + MOVD SI_ADDR(R1), R7 + MOVD R7, REG_R0(R2) + + // Store the signal number in R1. + MOVW R0, REG_R1(R2) + + RET |