diff options
Diffstat (limited to 'pkg/sentry/mm/io.go')
-rw-r--r-- | pkg/sentry/mm/io.go | 639 |
1 files changed, 639 insertions, 0 deletions
diff --git a/pkg/sentry/mm/io.go b/pkg/sentry/mm/io.go new file mode 100644 index 000000000..e4c057d28 --- /dev/null +++ b/pkg/sentry/mm/io.go @@ -0,0 +1,639 @@ +// Copyright 2018 The gVisor Authors. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +package mm + +import ( + "gvisor.googlesource.com/gvisor/pkg/sentry/context" + "gvisor.googlesource.com/gvisor/pkg/sentry/platform" + "gvisor.googlesource.com/gvisor/pkg/sentry/safemem" + "gvisor.googlesource.com/gvisor/pkg/sentry/usermem" + "gvisor.googlesource.com/gvisor/pkg/syserror" +) + +// There are two supported ways to copy data to/from application virtual +// memory: +// +// 1. Internally-mapped copying: Determine the platform.File that backs the +// copied-to/from virtual address, obtain a mapping of its pages, and read or +// write to the mapping. +// +// 2. AddressSpace copying: If platform.Platform.SupportsAddressSpaceIO() is +// true, AddressSpace permissions are applicable, and an AddressSpace is +// available, copy directly through the AddressSpace, handling faults as +// needed. +// +// (Given that internally-mapped copying requires that backing memory is always +// implemented using a host file descriptor, we could also preadv/pwritev to it +// instead. But this would incur a host syscall for each use of the mapped +// page, whereas mmap is a one-time cost.) +// +// The fixed overhead of internally-mapped copying is expected to be higher +// than that of AddressSpace copying since the former always needs to translate +// addresses, whereas the latter only needs to do so when faults occur. +// However, the throughput of internally-mapped copying is expected to be +// somewhat higher than that of AddressSpace copying due to the high cost of +// page faults and because implementations of the latter usually rely on +// safecopy, which doesn't use AVX registers. So we prefer to use AddressSpace +// copying (when available) for smaller copies, and switch to internally-mapped +// copying once a size threshold is exceeded. +const ( + // copyMapMinBytes is the size threshold for switching to internally-mapped + // copying in CopyOut, CopyIn, and ZeroOut. + copyMapMinBytes = 32 << 10 // 32 KB + + // rwMapMinBytes is the size threshold for switching to internally-mapped + // copying in CopyOutFrom and CopyInTo. It's lower than copyMapMinBytes + // since AddressSpace copying in this case requires additional buffering; + // see CopyOutFrom for details. + rwMapMinBytes = 512 +) + +// CheckIORange is similar to usermem.Addr.ToRange, but applies bounds checks +// consistent with Linux's arch/x86/include/asm/uaccess.h:access_ok(). +// +// Preconditions: length >= 0. +func (mm *MemoryManager) CheckIORange(addr usermem.Addr, length int64) (usermem.AddrRange, bool) { + // Note that access_ok() constrains end even if length == 0. + ar, ok := addr.ToRange(uint64(length)) + return ar, (ok && ar.End <= mm.layout.MaxAddr) +} + +// checkIOVec applies bound checks consistent with Linux's +// arch/x86/include/asm/uaccess.h:access_ok() to ars. +func (mm *MemoryManager) checkIOVec(ars usermem.AddrRangeSeq) bool { + for !ars.IsEmpty() { + ar := ars.Head() + if _, ok := mm.CheckIORange(ar.Start, int64(ar.Length())); !ok { + return false + } + ars = ars.Tail() + } + return true +} + +func (mm *MemoryManager) asioEnabled(opts usermem.IOOpts) bool { + return mm.haveASIO && !opts.IgnorePermissions && opts.AddressSpaceActive +} + +// translateIOError converts errors to EFAULT, as is usually reported for all +// I/O errors originating from MM in Linux. +func translateIOError(ctx context.Context, err error) error { + if err == nil { + return nil + } + if logIOErrors { + ctx.Debugf("MM I/O error: %v", err) + } + return syserror.EFAULT +} + +// CopyOut implements usermem.IO.CopyOut. +func (mm *MemoryManager) CopyOut(ctx context.Context, addr usermem.Addr, src []byte, opts usermem.IOOpts) (int, error) { + ar, ok := mm.CheckIORange(addr, int64(len(src))) + if !ok { + return 0, syserror.EFAULT + } + + if len(src) == 0 { + return 0, nil + } + + // Do AddressSpace IO if applicable. + if mm.asioEnabled(opts) && len(src) < copyMapMinBytes { + return mm.asCopyOut(ctx, addr, src) + } + + // Go through internal mappings. + n64, err := mm.withInternalMappings(ctx, ar, usermem.Write, opts.IgnorePermissions, func(ims safemem.BlockSeq) (uint64, error) { + n, err := safemem.CopySeq(ims, safemem.BlockSeqOf(safemem.BlockFromSafeSlice(src))) + return n, translateIOError(ctx, err) + }) + return int(n64), err +} + +func (mm *MemoryManager) asCopyOut(ctx context.Context, addr usermem.Addr, src []byte) (int, error) { + var done int + for { + n, err := mm.as.CopyOut(addr+usermem.Addr(done), src[done:]) + done += n + if err == nil { + return done, nil + } + if f, ok := err.(platform.SegmentationFault); ok { + ar, _ := addr.ToRange(uint64(len(src))) + if err := mm.handleASIOFault(ctx, f.Addr, ar, usermem.Write); err != nil { + return done, err + } + continue + } + return done, translateIOError(ctx, err) + } +} + +// CopyIn implements usermem.IO.CopyIn. +func (mm *MemoryManager) CopyIn(ctx context.Context, addr usermem.Addr, dst []byte, opts usermem.IOOpts) (int, error) { + ar, ok := mm.CheckIORange(addr, int64(len(dst))) + if !ok { + return 0, syserror.EFAULT + } + + if len(dst) == 0 { + return 0, nil + } + + // Do AddressSpace IO if applicable. + if mm.asioEnabled(opts) && len(dst) < copyMapMinBytes { + return mm.asCopyIn(ctx, addr, dst) + } + + // Go through internal mappings. + n64, err := mm.withInternalMappings(ctx, ar, usermem.Read, opts.IgnorePermissions, func(ims safemem.BlockSeq) (uint64, error) { + n, err := safemem.CopySeq(safemem.BlockSeqOf(safemem.BlockFromSafeSlice(dst)), ims) + return n, translateIOError(ctx, err) + }) + return int(n64), err +} + +func (mm *MemoryManager) asCopyIn(ctx context.Context, addr usermem.Addr, dst []byte) (int, error) { + var done int + for { + n, err := mm.as.CopyIn(addr+usermem.Addr(done), dst[done:]) + done += n + if err == nil { + return done, nil + } + if f, ok := err.(platform.SegmentationFault); ok { + ar, _ := addr.ToRange(uint64(len(dst))) + if err := mm.handleASIOFault(ctx, f.Addr, ar, usermem.Read); err != nil { + return done, err + } + continue + } + return done, translateIOError(ctx, err) + } +} + +// ZeroOut implements usermem.IO.ZeroOut. +func (mm *MemoryManager) ZeroOut(ctx context.Context, addr usermem.Addr, toZero int64, opts usermem.IOOpts) (int64, error) { + ar, ok := mm.CheckIORange(addr, toZero) + if !ok { + return 0, syserror.EFAULT + } + + if toZero == 0 { + return 0, nil + } + + // Do AddressSpace IO if applicable. + if mm.asioEnabled(opts) && toZero < copyMapMinBytes { + return mm.asZeroOut(ctx, addr, toZero) + } + + // Go through internal mappings. + return mm.withInternalMappings(ctx, ar, usermem.Write, opts.IgnorePermissions, func(dsts safemem.BlockSeq) (uint64, error) { + n, err := safemem.ZeroSeq(dsts) + return n, translateIOError(ctx, err) + }) +} + +func (mm *MemoryManager) asZeroOut(ctx context.Context, addr usermem.Addr, toZero int64) (int64, error) { + var done int64 + for { + n, err := mm.as.ZeroOut(addr+usermem.Addr(done), uintptr(toZero-done)) + done += int64(n) + if err == nil { + return done, nil + } + if f, ok := err.(platform.SegmentationFault); ok { + ar, _ := addr.ToRange(uint64(toZero)) + if err := mm.handleASIOFault(ctx, f.Addr, ar, usermem.Write); err != nil { + return done, err + } + continue + } + return done, translateIOError(ctx, err) + } +} + +// CopyOutFrom implements usermem.IO.CopyOutFrom. +func (mm *MemoryManager) CopyOutFrom(ctx context.Context, ars usermem.AddrRangeSeq, src safemem.Reader, opts usermem.IOOpts) (int64, error) { + if !mm.checkIOVec(ars) { + return 0, syserror.EFAULT + } + + if ars.NumBytes() == 0 { + return 0, nil + } + + // Do AddressSpace IO if applicable. + if mm.asioEnabled(opts) && ars.NumBytes() < rwMapMinBytes { + // We have to introduce a buffered copy, instead of just passing a + // safemem.BlockSeq representing addresses in the AddressSpace to src. + // This is because usermem.IO.CopyOutFrom() guarantees that it calls + // src.ReadToBlocks() at most once, which is incompatible with handling + // faults between calls. In the future, this is probably best resolved + // by introducing a CopyOutFrom variant or option that allows it to + // call src.ReadToBlocks() any number of times. + // + // This issue applies to CopyInTo as well. + buf := make([]byte, int(ars.NumBytes())) + bufN, bufErr := src.ReadToBlocks(safemem.BlockSeqOf(safemem.BlockFromSafeSlice(buf))) + var done int64 + for done < int64(bufN) { + ar := ars.Head() + cplen := int64(ar.Length()) + if cplen > int64(bufN)-done { + cplen = int64(bufN) - done + } + n, err := mm.asCopyOut(ctx, ar.Start, buf[int(done):int(done+cplen)]) + done += int64(n) + if err != nil { + return done, err + } + ars = ars.Tail() + } + // Do not convert errors returned by src to EFAULT. + return done, bufErr + } + + // Go through internal mappings. + return mm.withVecInternalMappings(ctx, ars, usermem.Write, opts.IgnorePermissions, src.ReadToBlocks) +} + +// CopyInTo implements usermem.IO.CopyInTo. +func (mm *MemoryManager) CopyInTo(ctx context.Context, ars usermem.AddrRangeSeq, dst safemem.Writer, opts usermem.IOOpts) (int64, error) { + if !mm.checkIOVec(ars) { + return 0, syserror.EFAULT + } + + if ars.NumBytes() == 0 { + return 0, nil + } + + // Do AddressSpace IO if applicable. + if mm.asioEnabled(opts) && ars.NumBytes() < rwMapMinBytes { + buf := make([]byte, int(ars.NumBytes())) + var done int + var bufErr error + for !ars.IsEmpty() { + ar := ars.Head() + var n int + n, bufErr = mm.asCopyIn(ctx, ar.Start, buf[done:done+int(ar.Length())]) + done += n + if bufErr != nil { + break + } + ars = ars.Tail() + } + n, err := dst.WriteFromBlocks(safemem.BlockSeqOf(safemem.BlockFromSafeSlice(buf[:done]))) + if err != nil { + return int64(n), err + } + // Do not convert errors returned by dst to EFAULT. + return int64(n), bufErr + } + + // Go through internal mappings. + return mm.withVecInternalMappings(ctx, ars, usermem.Read, opts.IgnorePermissions, dst.WriteFromBlocks) +} + +// SwapUint32 implements usermem.IO.SwapUint32. +func (mm *MemoryManager) SwapUint32(ctx context.Context, addr usermem.Addr, new uint32, opts usermem.IOOpts) (uint32, error) { + ar, ok := mm.CheckIORange(addr, 4) + if !ok { + return 0, syserror.EFAULT + } + + // Do AddressSpace IO if applicable. + if mm.haveASIO && opts.AddressSpaceActive && !opts.IgnorePermissions { + for { + old, err := mm.as.SwapUint32(addr, new) + if err == nil { + return old, nil + } + if f, ok := err.(platform.SegmentationFault); ok { + if err := mm.handleASIOFault(ctx, f.Addr, ar, usermem.ReadWrite); err != nil { + return 0, err + } + continue + } + return 0, translateIOError(ctx, err) + } + } + + // Go through internal mappings. + var old uint32 + _, err := mm.withInternalMappings(ctx, ar, usermem.ReadWrite, opts.IgnorePermissions, func(ims safemem.BlockSeq) (uint64, error) { + if ims.NumBlocks() != 1 || ims.NumBytes() != 4 { + // Atomicity is unachievable across mappings. + return 0, syserror.EFAULT + } + im := ims.Head() + var err error + old, err = safemem.SwapUint32(im, new) + if err != nil { + return 0, translateIOError(ctx, err) + } + // Return the number of bytes read. + return 4, nil + }) + return old, err +} + +// CompareAndSwapUint32 implements usermem.IO.CompareAndSwapUint32. +func (mm *MemoryManager) CompareAndSwapUint32(ctx context.Context, addr usermem.Addr, old, new uint32, opts usermem.IOOpts) (uint32, error) { + ar, ok := mm.CheckIORange(addr, 4) + if !ok { + return 0, syserror.EFAULT + } + + // Do AddressSpace IO if applicable. + if mm.haveASIO && opts.AddressSpaceActive && !opts.IgnorePermissions { + for { + prev, err := mm.as.CompareAndSwapUint32(addr, old, new) + if err == nil { + return prev, nil + } + if f, ok := err.(platform.SegmentationFault); ok { + if err := mm.handleASIOFault(ctx, f.Addr, ar, usermem.ReadWrite); err != nil { + return 0, err + } + continue + } + return 0, translateIOError(ctx, err) + } + } + + // Go through internal mappings. + var prev uint32 + _, err := mm.withInternalMappings(ctx, ar, usermem.ReadWrite, opts.IgnorePermissions, func(ims safemem.BlockSeq) (uint64, error) { + if ims.NumBlocks() != 1 || ims.NumBytes() != 4 { + // Atomicity is unachievable across mappings. + return 0, syserror.EFAULT + } + im := ims.Head() + var err error + prev, err = safemem.CompareAndSwapUint32(im, old, new) + if err != nil { + return 0, translateIOError(ctx, err) + } + // Return the number of bytes read. + return 4, nil + }) + return prev, err +} + +// LoadUint32 implements usermem.IO.LoadUint32. +func (mm *MemoryManager) LoadUint32(ctx context.Context, addr usermem.Addr, opts usermem.IOOpts) (uint32, error) { + ar, ok := mm.CheckIORange(addr, 4) + if !ok { + return 0, syserror.EFAULT + } + + // Do AddressSpace IO if applicable. + if mm.haveASIO && opts.AddressSpaceActive && !opts.IgnorePermissions { + for { + val, err := mm.as.LoadUint32(addr) + if err == nil { + return val, nil + } + if f, ok := err.(platform.SegmentationFault); ok { + if err := mm.handleASIOFault(ctx, f.Addr, ar, usermem.Read); err != nil { + return 0, err + } + continue + } + return 0, translateIOError(ctx, err) + } + } + + // Go through internal mappings. + var val uint32 + _, err := mm.withInternalMappings(ctx, ar, usermem.Read, opts.IgnorePermissions, func(ims safemem.BlockSeq) (uint64, error) { + if ims.NumBlocks() != 1 || ims.NumBytes() != 4 { + // Atomicity is unachievable across mappings. + return 0, syserror.EFAULT + } + im := ims.Head() + var err error + val, err = safemem.LoadUint32(im) + if err != nil { + return 0, translateIOError(ctx, err) + } + // Return the number of bytes read. + return 4, nil + }) + return val, err +} + +// handleASIOFault handles a page fault at address addr for an AddressSpaceIO +// operation spanning ioar. +// +// Preconditions: mm.as != nil. ioar.Length() != 0. ioar.Contains(addr). +func (mm *MemoryManager) handleASIOFault(ctx context.Context, addr usermem.Addr, ioar usermem.AddrRange, at usermem.AccessType) error { + // Try to map all remaining pages in the I/O operation. This RoundUp can't + // overflow because otherwise it would have been caught by CheckIORange. + end, _ := ioar.End.RoundUp() + ar := usermem.AddrRange{addr.RoundDown(), end} + + // Don't bother trying existingPMAsLocked; in most cases, if we did have + // existing pmas, we wouldn't have faulted. + + // Ensure that we have usable vmas. Here and below, only return early if we + // can't map the first (faulting) page; failure to map later pages are + // silently ignored. This maximizes partial success. + mm.mappingMu.RLock() + vseg, vend, err := mm.getVMAsLocked(ctx, ar, at, false) + if vendaddr := vend.Start(); vendaddr < ar.End { + if vendaddr <= ar.Start { + mm.mappingMu.RUnlock() + return translateIOError(ctx, err) + } + ar.End = vendaddr + } + + // Ensure that we have usable pmas. + mm.activeMu.Lock() + pseg, pend, err := mm.getPMAsLocked(ctx, vseg, ar, at) + mm.mappingMu.RUnlock() + if pendaddr := pend.Start(); pendaddr < ar.End { + if pendaddr <= ar.Start { + mm.activeMu.Unlock() + return translateIOError(ctx, err) + } + ar.End = pendaddr + } + + // Downgrade to a read-lock on activeMu since we don't need to mutate pmas + // anymore. + mm.activeMu.DowngradeLock() + + err = mm.mapASLocked(pseg, ar, false) + mm.activeMu.RUnlock() + return translateIOError(ctx, err) +} + +// withInternalMappings ensures that pmas exist for all addresses in ar, +// support access of type (at, ignorePermissions), and have internal mappings +// cached. It then calls f with mm.activeMu locked for reading, passing +// internal mappings for the subrange of ar for which this property holds. +// +// withInternalMappings takes a function returning uint64 since many safemem +// functions have this property, but returns an int64 since this is usually +// more useful for usermem.IO methods. +// +// Preconditions: 0 < ar.Length() <= math.MaxInt64. +func (mm *MemoryManager) withInternalMappings(ctx context.Context, ar usermem.AddrRange, at usermem.AccessType, ignorePermissions bool, f func(safemem.BlockSeq) (uint64, error)) (int64, error) { + // If pmas are already available, we can do IO without touching mm.vmas or + // mm.mappingMu. + mm.activeMu.RLock() + if pseg := mm.existingPMAsLocked(ar, at, ignorePermissions, true /* needInternalMappings */); pseg.Ok() { + n, err := f(mm.internalMappingsLocked(pseg, ar)) + mm.activeMu.RUnlock() + // Do not convert errors returned by f to EFAULT. + return int64(n), err + } + mm.activeMu.RUnlock() + + // Ensure that we have usable vmas. + mm.mappingMu.RLock() + vseg, vend, verr := mm.getVMAsLocked(ctx, ar, at, ignorePermissions) + if vendaddr := vend.Start(); vendaddr < ar.End { + if vendaddr <= ar.Start { + mm.mappingMu.RUnlock() + return 0, translateIOError(ctx, verr) + } + ar.End = vendaddr + } + + // Ensure that we have usable pmas. + mm.activeMu.Lock() + pseg, pend, perr := mm.getPMAsLocked(ctx, vseg, ar, at) + mm.mappingMu.RUnlock() + if pendaddr := pend.Start(); pendaddr < ar.End { + if pendaddr <= ar.Start { + mm.activeMu.Unlock() + return 0, translateIOError(ctx, perr) + } + ar.End = pendaddr + } + imend, imerr := mm.getPMAInternalMappingsLocked(pseg, ar) + mm.activeMu.DowngradeLock() + if imendaddr := imend.Start(); imendaddr < ar.End { + if imendaddr <= ar.Start { + mm.activeMu.RUnlock() + return 0, translateIOError(ctx, imerr) + } + ar.End = imendaddr + } + + // Do I/O. + un, err := f(mm.internalMappingsLocked(pseg, ar)) + mm.activeMu.RUnlock() + n := int64(un) + + // Return the first error in order of progress through ar. + if err != nil { + // Do not convert errors returned by f to EFAULT. + return n, err + } + if imerr != nil { + return n, translateIOError(ctx, imerr) + } + if perr != nil { + return n, translateIOError(ctx, perr) + } + return n, translateIOError(ctx, verr) +} + +// withVecInternalMappings ensures that pmas exist for all addresses in ars, +// support access of type (at, ignorePermissions), and have internal mappings +// cached. It then calls f with mm.activeMu locked for reading, passing +// internal mappings for the subset of ars for which this property holds. +// +// Preconditions: !ars.IsEmpty(). +func (mm *MemoryManager) withVecInternalMappings(ctx context.Context, ars usermem.AddrRangeSeq, at usermem.AccessType, ignorePermissions bool, f func(safemem.BlockSeq) (uint64, error)) (int64, error) { + // withInternalMappings is faster than withVecInternalMappings because of + // iterator plumbing (this isn't generally practical in the vector case due + // to iterator invalidation between AddrRanges). Use it if possible. + if ars.NumRanges() == 1 { + return mm.withInternalMappings(ctx, ars.Head(), at, ignorePermissions, f) + } + + // If pmas are already available, we can do IO without touching mm.vmas or + // mm.mappingMu. + mm.activeMu.RLock() + if mm.existingVecPMAsLocked(ars, at, ignorePermissions, true /* needInternalMappings */) { + n, err := f(mm.vecInternalMappingsLocked(ars)) + mm.activeMu.RUnlock() + // Do not convert errors returned by f to EFAULT. + return int64(n), err + } + mm.activeMu.RUnlock() + + // Ensure that we have usable vmas. + mm.mappingMu.RLock() + vars, verr := mm.getVecVMAsLocked(ctx, ars, at, ignorePermissions) + if vars.NumBytes() == 0 { + mm.mappingMu.RUnlock() + return 0, translateIOError(ctx, verr) + } + + // Ensure that we have usable pmas. + mm.activeMu.Lock() + pars, perr := mm.getVecPMAsLocked(ctx, vars, at) + mm.mappingMu.RUnlock() + if pars.NumBytes() == 0 { + mm.activeMu.Unlock() + return 0, translateIOError(ctx, perr) + } + imars, imerr := mm.getVecPMAInternalMappingsLocked(pars) + mm.activeMu.DowngradeLock() + if imars.NumBytes() == 0 { + mm.activeMu.RUnlock() + return 0, translateIOError(ctx, imerr) + } + + // Do I/O. + un, err := f(mm.vecInternalMappingsLocked(imars)) + mm.activeMu.RUnlock() + n := int64(un) + + // Return the first error in order of progress through ars. + if err != nil { + // Do not convert errors from f to EFAULT. + return n, err + } + if imerr != nil { + return n, translateIOError(ctx, imerr) + } + if perr != nil { + return n, translateIOError(ctx, perr) + } + return n, translateIOError(ctx, verr) +} + +// truncatedAddrRangeSeq returns a copy of ars, but with the end truncated to +// at most address end on AddrRange arsit.Head(). It is used in vector I/O paths to +// truncate usermem.AddrRangeSeq when errors occur. +// +// Preconditions: !arsit.IsEmpty(). end <= arsit.Head().End. +func truncatedAddrRangeSeq(ars, arsit usermem.AddrRangeSeq, end usermem.Addr) usermem.AddrRangeSeq { + ar := arsit.Head() + if end <= ar.Start { + return ars.TakeFirst64(ars.NumBytes() - arsit.NumBytes()) + } + return ars.TakeFirst64(ars.NumBytes() - arsit.NumBytes() + int64(end-ar.Start)) +} |