diff options
Diffstat (limited to 'pkg/sentry/fsimpl/ext/disklayout/superblock.go')
| -rw-r--r-- | pkg/sentry/fsimpl/ext/disklayout/superblock.go | 477 |
1 files changed, 0 insertions, 477 deletions
diff --git a/pkg/sentry/fsimpl/ext/disklayout/superblock.go b/pkg/sentry/fsimpl/ext/disklayout/superblock.go deleted file mode 100644 index 70948ebe9..000000000 --- a/pkg/sentry/fsimpl/ext/disklayout/superblock.go +++ /dev/null @@ -1,477 +0,0 @@ -// Copyright 2019 The gVisor Authors. -// -// Licensed under the Apache License, Version 2.0 (the "License"); -// you may not use this file except in compliance with the License. -// You may obtain a copy of the License at -// -// http://www.apache.org/licenses/LICENSE-2.0 -// -// Unless required by applicable law or agreed to in writing, software -// distributed under the License is distributed on an "AS IS" BASIS, -// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -// See the License for the specific language governing permissions and -// limitations under the License. - -package disklayout - -import ( - "gvisor.dev/gvisor/pkg/marshal" -) - -const ( - // SbOffset is the absolute offset at which the superblock is placed. - SbOffset = 1024 -) - -// SuperBlock should be implemented by structs representing the ext superblock. -// The superblock holds a lot of information about the enclosing filesystem. -// This interface aims to provide access methods to important information held -// by the superblock. It does NOT expose all fields of the superblock, only the -// ones necessary. This can be expanded when need be. -// -// Location and replication: -// - The superblock is located at offset 1024 in block group 0. -// - Redundant copies of the superblock and group descriptors are kept in -// all groups if SbSparse feature flag is NOT set. If it is set, the -// replicas only exist in groups whose group number is either 0 or a -// power of 3, 5, or 7. -// - There is also a sparse superblock feature v2 in which there are just -// two replicas saved in the block groups pointed by sb.s_backup_bgs. -// -// Replicas should eventually be updated if the superblock is updated. -// -// See https://www.kernel.org/doc/html/latest/filesystems/ext4/globals.html#super-block. -type SuperBlock interface { - marshal.Marshallable - - // InodesCount returns the total number of inodes in this filesystem. - InodesCount() uint32 - - // BlocksCount returns the total number of data blocks in this filesystem. - BlocksCount() uint64 - - // FreeBlocksCount returns the number of free blocks in this filesystem. - FreeBlocksCount() uint64 - - // FreeInodesCount returns the number of free inodes in this filesystem. - FreeInodesCount() uint32 - - // MountCount returns the number of mounts since the last fsck. - MountCount() uint16 - - // MaxMountCount returns the number of mounts allowed beyond which a fsck is - // needed. - MaxMountCount() uint16 - - // FirstDataBlock returns the absolute block number of the first data block, - // which contains the super block itself. - // - // If the filesystem has 1kb data blocks then this should return 1. For all - // other configurations, this typically returns 0. - FirstDataBlock() uint32 - - // BlockSize returns the size of one data block in this filesystem. - // This can be calculated by 2^(10 + sb.s_log_block_size). This ensures that - // the smallest block size is 1kb. - BlockSize() uint64 - - // BlocksPerGroup returns the number of data blocks in a block group. - BlocksPerGroup() uint32 - - // ClusterSize returns block cluster size (set during mkfs time by admin). - // This can be calculated by 2^(10 + sb.s_log_cluster_size). This ensures that - // the smallest cluster size is 1kb. - // - // sb.s_log_cluster_size must equal sb.s_log_block_size if bigalloc feature - // is NOT set and consequently BlockSize() = ClusterSize() in that case. - ClusterSize() uint64 - - // ClustersPerGroup returns: - // - number of clusters per group if bigalloc is enabled. - // - BlocksPerGroup() otherwise. - ClustersPerGroup() uint32 - - // InodeSize returns the size of the inode disk record size in bytes. Use this - // to iterate over inode arrays on disk. - // - // In ext2 and ext3: - // - Each inode had a disk record of 128 bytes. - // - The inode struct size was fixed at 128 bytes. - // - // In ext4 its possible to allocate larger on-disk inodes: - // - Inode disk record size = sb.s_inode_size (function return value). - // = 256 (default) - // - Inode struct size = 128 + inode.i_extra_isize. - // = 128 + 32 = 160 (default) - InodeSize() uint16 - - // InodesPerGroup returns the number of inodes in a block group. - InodesPerGroup() uint32 - - // BgDescSize returns the size of the block group descriptor struct. - // - // In ext2, ext3, ext4 (without 64-bit feature), the block group descriptor - // is only 32 bytes long. - // In ext4 with 64-bit feature, the block group descriptor expands to AT LEAST - // 64 bytes. It might be bigger than that. - BgDescSize() uint16 - - // CompatibleFeatures returns the CompatFeatures struct which holds all the - // compatible features this fs supports. - CompatibleFeatures() CompatFeatures - - // IncompatibleFeatures returns the CompatFeatures struct which holds all the - // incompatible features this fs supports. - IncompatibleFeatures() IncompatFeatures - - // ReadOnlyCompatibleFeatures returns the CompatFeatures struct which holds all the - // readonly compatible features this fs supports. - ReadOnlyCompatibleFeatures() RoCompatFeatures - - // Magic() returns the magic signature which must be 0xef53. - Magic() uint16 - - // Revision returns the superblock revision. Superblock struct fields from - // offset 0x54 till 0x150 should only be used if superblock has DynamicRev. - Revision() SbRevision -} - -// SbRevision is the type for superblock revisions. -type SbRevision uint32 - -// Super block revisions. -const ( - // OldRev is the good old (original) format. - OldRev SbRevision = 0 - - // DynamicRev is v2 format w/ dynamic inode sizes. - DynamicRev SbRevision = 1 -) - -// Superblock compatible features. -// This is not exhaustive, unused features are not listed. -const ( - // SbDirPrealloc indicates directory preallocation. - SbDirPrealloc = 0x1 - - // SbHasJournal indicates the presence of a journal. jbd2 should only work - // with this being set. - SbHasJournal = 0x4 - - // SbExtAttr indicates extended attributes support. - SbExtAttr = 0x8 - - // SbResizeInode indicates that the fs has reserved GDT blocks (right after - // group descriptors) for fs expansion. - SbResizeInode = 0x10 - - // SbDirIndex indicates that the fs has directory indices. - SbDirIndex = 0x20 - - // SbSparseV2 stands for Sparse superblock version 2. - SbSparseV2 = 0x200 -) - -// CompatFeatures represents a superblock's compatible feature set. If the -// kernel does not understand any of these feature, it can still read/write -// to this fs. -type CompatFeatures struct { - DirPrealloc bool - HasJournal bool - ExtAttr bool - ResizeInode bool - DirIndex bool - SparseV2 bool -} - -// ToInt converts superblock compatible features back to its 32-bit rep. -func (f CompatFeatures) ToInt() uint32 { - var res uint32 - - if f.DirPrealloc { - res |= SbDirPrealloc - } - if f.HasJournal { - res |= SbHasJournal - } - if f.ExtAttr { - res |= SbExtAttr - } - if f.ResizeInode { - res |= SbResizeInode - } - if f.DirIndex { - res |= SbDirIndex - } - if f.SparseV2 { - res |= SbSparseV2 - } - - return res -} - -// CompatFeaturesFromInt converts the integer representation of superblock -// compatible features to CompatFeatures struct. -func CompatFeaturesFromInt(f uint32) CompatFeatures { - return CompatFeatures{ - DirPrealloc: f&SbDirPrealloc > 0, - HasJournal: f&SbHasJournal > 0, - ExtAttr: f&SbExtAttr > 0, - ResizeInode: f&SbResizeInode > 0, - DirIndex: f&SbDirIndex > 0, - SparseV2: f&SbSparseV2 > 0, - } -} - -// Superblock incompatible features. -// This is not exhaustive, unused features are not listed. -const ( - // SbDirentFileType indicates that directory entries record the file type. - // We should use struct DirentNew for dirents then. - SbDirentFileType = 0x2 - - // SbRecovery indicates that the filesystem needs recovery. - SbRecovery = 0x4 - - // SbJournalDev indicates that the filesystem has a separate journal device. - SbJournalDev = 0x8 - - // SbMetaBG indicates that the filesystem is using Meta block groups. Moves - // the group descriptors from the congested first block group into the first - // group of each metablock group to increase the maximum block groups limit - // and hence support much larger filesystems. - // - // See https://www.kernel.org/doc/html/latest/filesystems/ext4/overview.html#meta-block-groups. - SbMetaBG = 0x10 - - // SbExtents indicates that the filesystem uses extents. Must be set in ext4 - // filesystems. - SbExtents = 0x40 - - // SbIs64Bit indicates that this filesystem addresses blocks with 64-bits. - // Hence can support 2^64 data blocks. - SbIs64Bit = 0x80 - - // SbMMP indicates that this filesystem has multiple mount protection. - // - // See https://www.kernel.org/doc/html/latest/filesystems/ext4/globals.html#multiple-mount-protection. - SbMMP = 0x100 - - // SbFlexBg indicates that this filesystem has flexible block groups. Several - // block groups are tied into one logical block group so that all the metadata - // for the block groups (bitmaps and inode tables) are close together for - // faster loading. Consequently, large files will be continuous on disk. - // However, this does not affect the placement of redundant superblocks and - // group descriptors. - // - // See https://www.kernel.org/doc/html/latest/filesystems/ext4/overview.html#flexible-block-groups. - SbFlexBg = 0x200 - - // SbLargeDir shows that large directory enabled. Directory htree can be 3 - // levels deep. Directory htrees are allowed to be 2 levels deep otherwise. - SbLargeDir = 0x4000 - - // SbInlineData allows inline data in inodes for really small files. - SbInlineData = 0x8000 - - // SbEncrypted indicates that this fs contains encrypted inodes. - SbEncrypted = 0x10000 -) - -// IncompatFeatures represents a superblock's incompatible feature set. If the -// kernel does not understand any of these feature, it should refuse to mount. -type IncompatFeatures struct { - DirentFileType bool - Recovery bool - JournalDev bool - MetaBG bool - Extents bool - Is64Bit bool - MMP bool - FlexBg bool - LargeDir bool - InlineData bool - Encrypted bool -} - -// ToInt converts superblock incompatible features back to its 32-bit rep. -func (f IncompatFeatures) ToInt() uint32 { - var res uint32 - - if f.DirentFileType { - res |= SbDirentFileType - } - if f.Recovery { - res |= SbRecovery - } - if f.JournalDev { - res |= SbJournalDev - } - if f.MetaBG { - res |= SbMetaBG - } - if f.Extents { - res |= SbExtents - } - if f.Is64Bit { - res |= SbIs64Bit - } - if f.MMP { - res |= SbMMP - } - if f.FlexBg { - res |= SbFlexBg - } - if f.LargeDir { - res |= SbLargeDir - } - if f.InlineData { - res |= SbInlineData - } - if f.Encrypted { - res |= SbEncrypted - } - - return res -} - -// IncompatFeaturesFromInt converts the integer representation of superblock -// incompatible features to IncompatFeatures struct. -func IncompatFeaturesFromInt(f uint32) IncompatFeatures { - return IncompatFeatures{ - DirentFileType: f&SbDirentFileType > 0, - Recovery: f&SbRecovery > 0, - JournalDev: f&SbJournalDev > 0, - MetaBG: f&SbMetaBG > 0, - Extents: f&SbExtents > 0, - Is64Bit: f&SbIs64Bit > 0, - MMP: f&SbMMP > 0, - FlexBg: f&SbFlexBg > 0, - LargeDir: f&SbLargeDir > 0, - InlineData: f&SbInlineData > 0, - Encrypted: f&SbEncrypted > 0, - } -} - -// Superblock readonly compatible features. -// This is not exhaustive, unused features are not listed. -const ( - // SbSparse indicates sparse superblocks. Only groups with number either 0 or - // a power of 3, 5, or 7 will have redundant copies of the superblock and - // block descriptors. - SbSparse = 0x1 - - // SbLargeFile indicates that this fs has been used to store a file >= 2GiB. - SbLargeFile = 0x2 - - // SbHugeFile indicates that this fs contains files whose sizes are - // represented in units of logicals blocks, not 512-byte sectors. - SbHugeFile = 0x8 - - // SbGdtCsum indicates that group descriptors have checksums. - SbGdtCsum = 0x10 - - // SbDirNlink indicates that the new subdirectory limit is 64,999. Ext3 has a - // 32,000 subdirectory limit. - SbDirNlink = 0x20 - - // SbExtraIsize indicates that large inodes exist on this filesystem. - SbExtraIsize = 0x40 - - // SbHasSnapshot indicates the existence of a snapshot. - SbHasSnapshot = 0x80 - - // SbQuota enables usage tracking for all quota types. - SbQuota = 0x100 - - // SbBigalloc maps to the bigalloc feature. When set, the minimum allocation - // unit becomes a cluster rather than a data block. Then block bitmaps track - // clusters, not data blocks. - // - // See https://www.kernel.org/doc/html/latest/filesystems/ext4/overview.html#bigalloc. - SbBigalloc = 0x200 - - // SbMetadataCsum indicates that the fs supports metadata checksumming. - SbMetadataCsum = 0x400 - - // SbReadOnly marks this filesystem as readonly. Should refuse to mount in - // read/write mode. - SbReadOnly = 0x1000 -) - -// RoCompatFeatures represents a superblock's readonly compatible feature set. -// If the kernel does not understand any of these feature, it can still mount -// readonly. But if the user wants to mount read/write, the kernel should -// refuse to mount. -type RoCompatFeatures struct { - Sparse bool - LargeFile bool - HugeFile bool - GdtCsum bool - DirNlink bool - ExtraIsize bool - HasSnapshot bool - Quota bool - Bigalloc bool - MetadataCsum bool - ReadOnly bool -} - -// ToInt converts superblock readonly compatible features to its 32-bit rep. -func (f RoCompatFeatures) ToInt() uint32 { - var res uint32 - - if f.Sparse { - res |= SbSparse - } - if f.LargeFile { - res |= SbLargeFile - } - if f.HugeFile { - res |= SbHugeFile - } - if f.GdtCsum { - res |= SbGdtCsum - } - if f.DirNlink { - res |= SbDirNlink - } - if f.ExtraIsize { - res |= SbExtraIsize - } - if f.HasSnapshot { - res |= SbHasSnapshot - } - if f.Quota { - res |= SbQuota - } - if f.Bigalloc { - res |= SbBigalloc - } - if f.MetadataCsum { - res |= SbMetadataCsum - } - if f.ReadOnly { - res |= SbReadOnly - } - - return res -} - -// RoCompatFeaturesFromInt converts the integer representation of superblock -// readonly compatible features to RoCompatFeatures struct. -func RoCompatFeaturesFromInt(f uint32) RoCompatFeatures { - return RoCompatFeatures{ - Sparse: f&SbSparse > 0, - LargeFile: f&SbLargeFile > 0, - HugeFile: f&SbHugeFile > 0, - GdtCsum: f&SbGdtCsum > 0, - DirNlink: f&SbDirNlink > 0, - ExtraIsize: f&SbExtraIsize > 0, - HasSnapshot: f&SbHasSnapshot > 0, - Quota: f&SbQuota > 0, - Bigalloc: f&SbBigalloc > 0, - MetadataCsum: f&SbMetadataCsum > 0, - ReadOnly: f&SbReadOnly > 0, - } -} |