diff options
Diffstat (limited to 'pkg/lisafs/message.go')
| -rw-r--r-- | pkg/lisafs/message.go | 993 |
1 files changed, 993 insertions, 0 deletions
diff --git a/pkg/lisafs/message.go b/pkg/lisafs/message.go index 55fd2c0b1..722afd0be 100644 --- a/pkg/lisafs/message.go +++ b/pkg/lisafs/message.go @@ -46,6 +46,94 @@ const ( // Channel requests to start a new communicational channel. Channel MID = 2 + + // FStat requests the stat(2) results for a specified file. + FStat MID = 3 + + // SetStat requests to change file attributes. Note that there is no one + // corresponding Linux syscall. This is a conglomeration of fchmod(2), + // fchown(2), ftruncate(2) and futimesat(2). + SetStat MID = 4 + + // Walk requests to walk the specified path starting from the specified + // directory. Server-side path traversal is terminated preemptively on + // symlinks entries because they can cause non-linear traversal. + Walk MID = 5 + + // WalkStat is the same as Walk, except the following differences: + // * If the first path component is "", then it also returns stat results + // for the directory where the walk starts. + // * Does not return Inode, just the Stat results for each path component. + WalkStat MID = 6 + + // OpenAt is analogous to openat(2). It does not perform any walk. It merely + // duplicates the control FD with the open flags passed. + OpenAt MID = 7 + + // OpenCreateAt is analogous to openat(2) with O_CREAT|O_EXCL added to flags. + // It also returns the newly created file inode. + OpenCreateAt MID = 8 + + // Close is analogous to close(2) but can work on multiple FDs. + Close MID = 9 + + // FSync is analogous to fsync(2) but can work on multiple FDs. + FSync MID = 10 + + // PWrite is analogous to pwrite(2). + PWrite MID = 11 + + // PRead is analogous to pread(2). + PRead MID = 12 + + // MkdirAt is analogous to mkdirat(2). + MkdirAt MID = 13 + + // MknodAt is analogous to mknodat(2). + MknodAt MID = 14 + + // SymlinkAt is analogous to symlinkat(2). + SymlinkAt MID = 15 + + // LinkAt is analogous to linkat(2). + LinkAt MID = 16 + + // FStatFS is analogous to fstatfs(2). + FStatFS MID = 17 + + // FAllocate is analogous to fallocate(2). + FAllocate MID = 18 + + // ReadLinkAt is analogous to readlinkat(2). + ReadLinkAt MID = 19 + + // Flush cleans up the file state. Its behavior is implementation + // dependent and might not even be supported in server implementations. + Flush MID = 20 + + // Connect is loosely analogous to connect(2). + Connect MID = 21 + + // UnlinkAt is analogous to unlinkat(2). + UnlinkAt MID = 22 + + // RenameAt is loosely analogous to renameat(2). + RenameAt MID = 23 + + // Getdents64 is analogous to getdents64(2). + Getdents64 MID = 24 + + // FGetXattr is analogous to fgetxattr(2). + FGetXattr MID = 25 + + // FSetXattr is analogous to fsetxattr(2). + FSetXattr MID = 26 + + // FListXattr is analogous to flistxattr(2). + FListXattr MID = 27 + + // FRemoveXattr is analogous to fremovexattr(2). + FRemoveXattr MID = 28 ) const ( @@ -256,3 +344,908 @@ type ChannelResp struct { type ErrorResp struct { errno uint32 } + +// StatReq requests the stat results for the specified FD. +// +// +marshal +type StatReq struct { + FD FDID +} + +// SetStatReq is used to set attributeds on FDs. +// +// +marshal +type SetStatReq struct { + FD FDID + _ uint32 + Mask uint32 + Mode uint32 // Only permissions part is settable. + UID UID + GID GID + Size uint64 + Atime linux.Timespec + Mtime linux.Timespec +} + +// SetStatResp is used to communicate SetStat results. It contains a mask +// representing the failed changes. It also contains the errno of the failed +// set attribute operation. If multiple operations failed then any of those +// errnos can be returned. +// +// +marshal +type SetStatResp struct { + FailureMask uint32 + FailureErrNo uint32 +} + +// WalkReq is used to request to walk multiple path components at once. This +// is used for both Walk and WalkStat. +type WalkReq struct { + DirFD FDID + Path StringArray +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (w *WalkReq) SizeBytes() int { + return w.DirFD.SizeBytes() + w.Path.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (w *WalkReq) MarshalBytes(dst []byte) { + w.DirFD.MarshalUnsafe(dst) + dst = dst[w.DirFD.SizeBytes():] + w.Path.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (w *WalkReq) UnmarshalBytes(src []byte) { + w.DirFD.UnmarshalUnsafe(src) + src = src[w.DirFD.SizeBytes():] + w.Path.UnmarshalBytes(src) +} + +// WalkStatus is used to indicate the reason for partial/unsuccessful server +// side Walk operations. Please note that partial/unsuccessful walk operations +// do not necessarily fail the RPC. The RPC is successful with a failure hint +// which can be used by the client to infer server-side state. +type WalkStatus = primitive.Uint8 + +const ( + // WalkSuccess indicates that all path components were successfully walked. + WalkSuccess WalkStatus = iota + + // WalkComponentDoesNotExist indicates that the walk was prematurely + // terminated because an intermediate path component does not exist on + // server. The results of all previous existing path components is returned. + WalkComponentDoesNotExist + + // WalkComponentSymlink indicates that the walk was prematurely + // terminated because an intermediate path component was a symlink. It is not + // safe to resolve symlinks remotely (unaware of mount points). + WalkComponentSymlink +) + +// WalkResp is used to communicate the inodes walked by the server. +type WalkResp struct { + Status WalkStatus + Inodes []Inode +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (w *WalkResp) SizeBytes() int { + return w.Status.SizeBytes() + + (*primitive.Uint32)(nil).SizeBytes() + (len(w.Inodes) * (*Inode)(nil).SizeBytes()) +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (w *WalkResp) MarshalBytes(dst []byte) { + w.Status.MarshalUnsafe(dst) + dst = dst[w.Status.SizeBytes():] + + numInodes := primitive.Uint32(len(w.Inodes)) + numInodes.MarshalUnsafe(dst) + dst = dst[numInodes.SizeBytes():] + + MarshalUnsafeInodeSlice(w.Inodes, dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (w *WalkResp) UnmarshalBytes(src []byte) { + w.Status.UnmarshalUnsafe(src) + src = src[w.Status.SizeBytes():] + + var numInodes primitive.Uint32 + numInodes.UnmarshalUnsafe(src) + src = src[numInodes.SizeBytes():] + + if cap(w.Inodes) < int(numInodes) { + w.Inodes = make([]Inode, numInodes) + } else { + w.Inodes = w.Inodes[:numInodes] + } + UnmarshalUnsafeInodeSlice(w.Inodes, src) +} + +// WalkStatResp is used to communicate stat results for WalkStat. +type WalkStatResp struct { + Stats []linux.Statx +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (w *WalkStatResp) SizeBytes() int { + return (*primitive.Uint32)(nil).SizeBytes() + (len(w.Stats) * linux.SizeOfStatx) +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (w *WalkStatResp) MarshalBytes(dst []byte) { + numStats := primitive.Uint32(len(w.Stats)) + numStats.MarshalUnsafe(dst) + dst = dst[numStats.SizeBytes():] + + linux.MarshalUnsafeStatxSlice(w.Stats, dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (w *WalkStatResp) UnmarshalBytes(src []byte) { + var numStats primitive.Uint32 + numStats.UnmarshalUnsafe(src) + src = src[numStats.SizeBytes():] + + if cap(w.Stats) < int(numStats) { + w.Stats = make([]linux.Statx, numStats) + } else { + w.Stats = w.Stats[:numStats] + } + linux.UnmarshalUnsafeStatxSlice(w.Stats, src) +} + +// OpenAtReq is used to open existing FDs with the specified flags. +// +// +marshal +type OpenAtReq struct { + FD FDID + Flags uint32 +} + +// OpenAtResp is used to communicate the newly created FD. +// +// +marshal +type OpenAtResp struct { + NewFD FDID +} + +// +marshal +type createCommon struct { + DirFD FDID + Mode linux.FileMode + _ uint16 // Need to make struct packed. + UID UID + GID GID +} + +// OpenCreateAtReq is used to make OpenCreateAt requests. +type OpenCreateAtReq struct { + createCommon + Name SizedString + Flags primitive.Uint32 +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (o *OpenCreateAtReq) SizeBytes() int { + return o.createCommon.SizeBytes() + o.Name.SizeBytes() + o.Flags.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (o *OpenCreateAtReq) MarshalBytes(dst []byte) { + o.createCommon.MarshalUnsafe(dst) + dst = dst[o.createCommon.SizeBytes():] + o.Name.MarshalBytes(dst) + dst = dst[o.Name.SizeBytes():] + o.Flags.MarshalUnsafe(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (o *OpenCreateAtReq) UnmarshalBytes(src []byte) { + o.createCommon.UnmarshalUnsafe(src) + src = src[o.createCommon.SizeBytes():] + o.Name.UnmarshalBytes(src) + src = src[o.Name.SizeBytes():] + o.Flags.UnmarshalUnsafe(src) +} + +// OpenCreateAtResp is used to communicate successful OpenCreateAt results. +// +// +marshal +type OpenCreateAtResp struct { + Child Inode + NewFD FDID + _ uint32 // Need to make struct packed. +} + +// FdArray is a utility struct which implements a marshallable type for +// communicating an array of FDIDs. In memory, the array data is preceded by a +// uint32 denoting the array length. +type FdArray []FDID + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (f *FdArray) SizeBytes() int { + return (*primitive.Uint32)(nil).SizeBytes() + (len(*f) * (*FDID)(nil).SizeBytes()) +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (f *FdArray) MarshalBytes(dst []byte) { + arrLen := primitive.Uint32(len(*f)) + arrLen.MarshalUnsafe(dst) + dst = dst[arrLen.SizeBytes():] + MarshalUnsafeFDIDSlice(*f, dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (f *FdArray) UnmarshalBytes(src []byte) { + var arrLen primitive.Uint32 + arrLen.UnmarshalUnsafe(src) + src = src[arrLen.SizeBytes():] + if cap(*f) < int(arrLen) { + *f = make(FdArray, arrLen) + } else { + *f = (*f)[:arrLen] + } + UnmarshalUnsafeFDIDSlice(*f, src) +} + +// CloseReq is used to close(2) FDs. +type CloseReq struct { + FDs FdArray +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (c *CloseReq) SizeBytes() int { + return c.FDs.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (c *CloseReq) MarshalBytes(dst []byte) { + c.FDs.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (c *CloseReq) UnmarshalBytes(src []byte) { + c.FDs.UnmarshalBytes(src) +} + +// FsyncReq is used to fsync(2) FDs. +type FsyncReq struct { + FDs FdArray +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (f *FsyncReq) SizeBytes() int { + return f.FDs.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (f *FsyncReq) MarshalBytes(dst []byte) { + f.FDs.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (f *FsyncReq) UnmarshalBytes(src []byte) { + f.FDs.UnmarshalBytes(src) +} + +// PReadReq is used to pread(2) on an FD. +// +// +marshal +type PReadReq struct { + Offset uint64 + FD FDID + Count uint32 +} + +// PReadResp is used to return the result of pread(2). +type PReadResp struct { + NumBytes primitive.Uint32 + Buf []byte +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (r *PReadResp) SizeBytes() int { + return r.NumBytes.SizeBytes() + int(r.NumBytes) +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (r *PReadResp) MarshalBytes(dst []byte) { + r.NumBytes.MarshalUnsafe(dst) + dst = dst[r.NumBytes.SizeBytes():] + copy(dst[:r.NumBytes], r.Buf[:r.NumBytes]) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (r *PReadResp) UnmarshalBytes(src []byte) { + r.NumBytes.UnmarshalUnsafe(src) + src = src[r.NumBytes.SizeBytes():] + + // We expect the client to have already allocated r.Buf. r.Buf probably + // (optimally) points to usermem. Directly copy into that. + copy(r.Buf[:r.NumBytes], src[:r.NumBytes]) +} + +// PWriteReq is used to pwrite(2) on an FD. +type PWriteReq struct { + Offset primitive.Uint64 + FD FDID + NumBytes primitive.Uint32 + Buf []byte +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (w *PWriteReq) SizeBytes() int { + return w.Offset.SizeBytes() + w.FD.SizeBytes() + w.NumBytes.SizeBytes() + int(w.NumBytes) +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (w *PWriteReq) MarshalBytes(dst []byte) { + w.Offset.MarshalUnsafe(dst) + dst = dst[w.Offset.SizeBytes():] + w.FD.MarshalUnsafe(dst) + dst = dst[w.FD.SizeBytes():] + w.NumBytes.MarshalUnsafe(dst) + dst = dst[w.NumBytes.SizeBytes():] + copy(dst[:w.NumBytes], w.Buf[:w.NumBytes]) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (w *PWriteReq) UnmarshalBytes(src []byte) { + w.Offset.UnmarshalUnsafe(src) + src = src[w.Offset.SizeBytes():] + w.FD.UnmarshalUnsafe(src) + src = src[w.FD.SizeBytes():] + w.NumBytes.UnmarshalUnsafe(src) + src = src[w.NumBytes.SizeBytes():] + + // This is an optimization. Assuming that the server is making this call, it + // is safe to just point to src rather than allocating and copying. + w.Buf = src[:w.NumBytes] +} + +// PWriteResp is used to return the result of pwrite(2). +// +// +marshal +type PWriteResp struct { + Count uint64 +} + +// MkdirAtReq is used to make MkdirAt requests. +type MkdirAtReq struct { + createCommon + Name SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (m *MkdirAtReq) SizeBytes() int { + return m.createCommon.SizeBytes() + m.Name.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (m *MkdirAtReq) MarshalBytes(dst []byte) { + m.createCommon.MarshalUnsafe(dst) + dst = dst[m.createCommon.SizeBytes():] + m.Name.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (m *MkdirAtReq) UnmarshalBytes(src []byte) { + m.createCommon.UnmarshalUnsafe(src) + src = src[m.createCommon.SizeBytes():] + m.Name.UnmarshalBytes(src) +} + +// MkdirAtResp is the response to a successful MkdirAt request. +// +// +marshal +type MkdirAtResp struct { + ChildDir Inode +} + +// MknodAtReq is used to make MknodAt requests. +type MknodAtReq struct { + createCommon + Name SizedString + Minor primitive.Uint32 + Major primitive.Uint32 +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (m *MknodAtReq) SizeBytes() int { + return m.createCommon.SizeBytes() + m.Name.SizeBytes() + m.Minor.SizeBytes() + m.Major.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (m *MknodAtReq) MarshalBytes(dst []byte) { + m.createCommon.MarshalUnsafe(dst) + dst = dst[m.createCommon.SizeBytes():] + m.Name.MarshalBytes(dst) + dst = dst[m.Name.SizeBytes():] + m.Minor.MarshalUnsafe(dst) + dst = dst[m.Minor.SizeBytes():] + m.Major.MarshalUnsafe(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (m *MknodAtReq) UnmarshalBytes(src []byte) { + m.createCommon.UnmarshalUnsafe(src) + src = src[m.createCommon.SizeBytes():] + m.Name.UnmarshalBytes(src) + src = src[m.Name.SizeBytes():] + m.Minor.UnmarshalUnsafe(src) + src = src[m.Minor.SizeBytes():] + m.Major.UnmarshalUnsafe(src) +} + +// MknodAtResp is the response to a successful MknodAt request. +// +// +marshal +type MknodAtResp struct { + Child Inode +} + +// SymlinkAtReq is used to make SymlinkAt request. +type SymlinkAtReq struct { + DirFD FDID + Name SizedString + Target SizedString + UID UID + GID GID +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (s *SymlinkAtReq) SizeBytes() int { + return s.DirFD.SizeBytes() + s.Name.SizeBytes() + s.Target.SizeBytes() + s.UID.SizeBytes() + s.GID.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (s *SymlinkAtReq) MarshalBytes(dst []byte) { + s.DirFD.MarshalUnsafe(dst) + dst = dst[s.DirFD.SizeBytes():] + s.Name.MarshalBytes(dst) + dst = dst[s.Name.SizeBytes():] + s.Target.MarshalBytes(dst) + dst = dst[s.Target.SizeBytes():] + s.UID.MarshalUnsafe(dst) + dst = dst[s.UID.SizeBytes():] + s.GID.MarshalUnsafe(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (s *SymlinkAtReq) UnmarshalBytes(src []byte) { + s.DirFD.UnmarshalUnsafe(src) + src = src[s.DirFD.SizeBytes():] + s.Name.UnmarshalBytes(src) + src = src[s.Name.SizeBytes():] + s.Target.UnmarshalBytes(src) + src = src[s.Target.SizeBytes():] + s.UID.UnmarshalUnsafe(src) + src = src[s.UID.SizeBytes():] + s.GID.UnmarshalUnsafe(src) +} + +// SymlinkAtResp is the response to a successful SymlinkAt request. +// +// +marshal +type SymlinkAtResp struct { + Symlink Inode +} + +// LinkAtReq is used to make LinkAt requests. +type LinkAtReq struct { + DirFD FDID + Target FDID + Name SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (l *LinkAtReq) SizeBytes() int { + return l.DirFD.SizeBytes() + l.Target.SizeBytes() + l.Name.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (l *LinkAtReq) MarshalBytes(dst []byte) { + l.DirFD.MarshalUnsafe(dst) + dst = dst[l.DirFD.SizeBytes():] + l.Target.MarshalUnsafe(dst) + dst = dst[l.Target.SizeBytes():] + l.Name.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (l *LinkAtReq) UnmarshalBytes(src []byte) { + l.DirFD.UnmarshalUnsafe(src) + src = src[l.DirFD.SizeBytes():] + l.Target.UnmarshalUnsafe(src) + src = src[l.Target.SizeBytes():] + l.Name.UnmarshalBytes(src) +} + +// LinkAtResp is used to respond to a successful LinkAt request. +// +// +marshal +type LinkAtResp struct { + Link Inode +} + +// FStatFSReq is used to request StatFS results for the specified FD. +// +// +marshal +type FStatFSReq struct { + FD FDID +} + +// StatFS is responded to a successful FStatFS request. +// +// +marshal +type StatFS struct { + Type uint64 + BlockSize int64 + Blocks uint64 + BlocksFree uint64 + BlocksAvailable uint64 + Files uint64 + FilesFree uint64 + NameLength uint64 +} + +// FAllocateReq is used to request to fallocate(2) an FD. This has no response. +// +// +marshal +type FAllocateReq struct { + FD FDID + _ uint32 + Mode uint64 + Offset uint64 + Length uint64 +} + +// ReadLinkAtReq is used to readlinkat(2) at the specified FD. +// +// +marshal +type ReadLinkAtReq struct { + FD FDID +} + +// ReadLinkAtResp is used to communicate ReadLinkAt results. +type ReadLinkAtResp struct { + Target SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (r *ReadLinkAtResp) SizeBytes() int { + return r.Target.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (r *ReadLinkAtResp) MarshalBytes(dst []byte) { + r.Target.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (r *ReadLinkAtResp) UnmarshalBytes(src []byte) { + r.Target.UnmarshalBytes(src) +} + +// FlushReq is used to make Flush requests. +// +// +marshal +type FlushReq struct { + FD FDID +} + +// ConnectReq is used to make a Connect request. +// +// +marshal +type ConnectReq struct { + FD FDID + // SockType is used to specify the socket type to connect to. As a special + // case, SockType = 0 means that the socket type does not matter and the + // requester will accept any socket type. + SockType uint32 +} + +// UnlinkAtReq is used to make UnlinkAt request. +type UnlinkAtReq struct { + DirFD FDID + Name SizedString + Flags primitive.Uint32 +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (u *UnlinkAtReq) SizeBytes() int { + return u.DirFD.SizeBytes() + u.Name.SizeBytes() + u.Flags.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (u *UnlinkAtReq) MarshalBytes(dst []byte) { + u.DirFD.MarshalUnsafe(dst) + dst = dst[u.DirFD.SizeBytes():] + u.Name.MarshalBytes(dst) + dst = dst[u.Name.SizeBytes():] + u.Flags.MarshalUnsafe(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (u *UnlinkAtReq) UnmarshalBytes(src []byte) { + u.DirFD.UnmarshalUnsafe(src) + src = src[u.DirFD.SizeBytes():] + u.Name.UnmarshalBytes(src) + src = src[u.Name.SizeBytes():] + u.Flags.UnmarshalUnsafe(src) +} + +// RenameAtReq is used to make Rename requests. Note that the request takes in +// the to-be-renamed file's FD instead of oldDir and oldName like renameat(2). +type RenameAtReq struct { + Renamed FDID + NewDir FDID + NewName SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (r *RenameAtReq) SizeBytes() int { + return r.Renamed.SizeBytes() + r.NewDir.SizeBytes() + r.NewName.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (r *RenameAtReq) MarshalBytes(dst []byte) { + r.Renamed.MarshalUnsafe(dst) + dst = dst[r.Renamed.SizeBytes():] + r.NewDir.MarshalUnsafe(dst) + dst = dst[r.NewDir.SizeBytes():] + r.NewName.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (r *RenameAtReq) UnmarshalBytes(src []byte) { + r.Renamed.UnmarshalUnsafe(src) + src = src[r.Renamed.SizeBytes():] + r.NewDir.UnmarshalUnsafe(src) + src = src[r.NewDir.SizeBytes():] + r.NewName.UnmarshalBytes(src) +} + +// Getdents64Req is used to make Getdents64 requests. +// +// +marshal +type Getdents64Req struct { + DirFD FDID + // Count is the number of bytes to read. A negative value of Count is used to + // indicate that the implementation must lseek(0, SEEK_SET) before calling + // getdents64(2). Implementations must use the absolute value of Count to + // determine the number of bytes to read. + Count int32 +} + +// Dirent64 is analogous to struct linux_dirent64. +type Dirent64 struct { + Ino primitive.Uint64 + DevMinor primitive.Uint32 + DevMajor primitive.Uint32 + Off primitive.Uint64 + Type primitive.Uint8 + Name SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (d *Dirent64) SizeBytes() int { + return d.Ino.SizeBytes() + d.DevMinor.SizeBytes() + d.DevMajor.SizeBytes() + d.Off.SizeBytes() + d.Type.SizeBytes() + d.Name.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (d *Dirent64) MarshalBytes(dst []byte) { + d.Ino.MarshalUnsafe(dst) + dst = dst[d.Ino.SizeBytes():] + d.DevMinor.MarshalUnsafe(dst) + dst = dst[d.DevMinor.SizeBytes():] + d.DevMajor.MarshalUnsafe(dst) + dst = dst[d.DevMajor.SizeBytes():] + d.Off.MarshalUnsafe(dst) + dst = dst[d.Off.SizeBytes():] + d.Type.MarshalUnsafe(dst) + dst = dst[d.Type.SizeBytes():] + d.Name.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (d *Dirent64) UnmarshalBytes(src []byte) { + d.Ino.UnmarshalUnsafe(src) + src = src[d.Ino.SizeBytes():] + d.DevMinor.UnmarshalUnsafe(src) + src = src[d.DevMinor.SizeBytes():] + d.DevMajor.UnmarshalUnsafe(src) + src = src[d.DevMajor.SizeBytes():] + d.Off.UnmarshalUnsafe(src) + src = src[d.Off.SizeBytes():] + d.Type.UnmarshalUnsafe(src) + src = src[d.Type.SizeBytes():] + d.Name.UnmarshalBytes(src) +} + +// Getdents64Resp is used to communicate getdents64 results. +type Getdents64Resp struct { + Dirents []Dirent64 +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (g *Getdents64Resp) SizeBytes() int { + ret := (*primitive.Uint32)(nil).SizeBytes() + for i := range g.Dirents { + ret += g.Dirents[i].SizeBytes() + } + return ret +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (g *Getdents64Resp) MarshalBytes(dst []byte) { + numDirents := primitive.Uint32(len(g.Dirents)) + numDirents.MarshalUnsafe(dst) + dst = dst[numDirents.SizeBytes():] + for i := range g.Dirents { + g.Dirents[i].MarshalBytes(dst) + dst = dst[g.Dirents[i].SizeBytes():] + } +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (g *Getdents64Resp) UnmarshalBytes(src []byte) { + var numDirents primitive.Uint32 + numDirents.UnmarshalUnsafe(src) + if cap(g.Dirents) < int(numDirents) { + g.Dirents = make([]Dirent64, numDirents) + } else { + g.Dirents = g.Dirents[:numDirents] + } + + src = src[numDirents.SizeBytes():] + for i := range g.Dirents { + g.Dirents[i].UnmarshalBytes(src) + src = src[g.Dirents[i].SizeBytes():] + } +} + +// FGetXattrReq is used to make FGetXattr requests. The response to this is +// just a SizedString containing the xattr value. +type FGetXattrReq struct { + FD FDID + BufSize primitive.Uint32 + Name SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (g *FGetXattrReq) SizeBytes() int { + return g.FD.SizeBytes() + g.BufSize.SizeBytes() + g.Name.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (g *FGetXattrReq) MarshalBytes(dst []byte) { + g.FD.MarshalUnsafe(dst) + dst = dst[g.FD.SizeBytes():] + g.BufSize.MarshalUnsafe(dst) + dst = dst[g.BufSize.SizeBytes():] + g.Name.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (g *FGetXattrReq) UnmarshalBytes(src []byte) { + g.FD.UnmarshalUnsafe(src) + src = src[g.FD.SizeBytes():] + g.BufSize.UnmarshalUnsafe(src) + src = src[g.BufSize.SizeBytes():] + g.Name.UnmarshalBytes(src) +} + +// FGetXattrResp is used to respond to FGetXattr request. +type FGetXattrResp struct { + Value SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (g *FGetXattrResp) SizeBytes() int { + return g.Value.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (g *FGetXattrResp) MarshalBytes(dst []byte) { + g.Value.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (g *FGetXattrResp) UnmarshalBytes(src []byte) { + g.Value.UnmarshalBytes(src) +} + +// FSetXattrReq is used to make FSetXattr requests. It has no response. +type FSetXattrReq struct { + FD FDID + Flags primitive.Uint32 + Name SizedString + Value SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (s *FSetXattrReq) SizeBytes() int { + return s.FD.SizeBytes() + s.Flags.SizeBytes() + s.Name.SizeBytes() + s.Value.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (s *FSetXattrReq) MarshalBytes(dst []byte) { + s.FD.MarshalUnsafe(dst) + dst = dst[s.FD.SizeBytes():] + s.Flags.MarshalUnsafe(dst) + dst = dst[s.Flags.SizeBytes():] + s.Name.MarshalBytes(dst) + dst = dst[s.Name.SizeBytes():] + s.Value.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (s *FSetXattrReq) UnmarshalBytes(src []byte) { + s.FD.UnmarshalUnsafe(src) + src = src[s.FD.SizeBytes():] + s.Flags.UnmarshalUnsafe(src) + src = src[s.Flags.SizeBytes():] + s.Name.UnmarshalBytes(src) + src = src[s.Name.SizeBytes():] + s.Value.UnmarshalBytes(src) +} + +// FRemoveXattrReq is used to make FRemoveXattr requests. It has no response. +type FRemoveXattrReq struct { + FD FDID + Name SizedString +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (r *FRemoveXattrReq) SizeBytes() int { + return r.FD.SizeBytes() + r.Name.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (r *FRemoveXattrReq) MarshalBytes(dst []byte) { + r.FD.MarshalUnsafe(dst) + dst = dst[r.FD.SizeBytes():] + r.Name.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (r *FRemoveXattrReq) UnmarshalBytes(src []byte) { + r.FD.UnmarshalUnsafe(src) + src = src[r.FD.SizeBytes():] + r.Name.UnmarshalBytes(src) +} + +// FListXattrReq is used to make FListXattr requests. +// +// +marshal +type FListXattrReq struct { + FD FDID + _ uint32 + Size uint64 +} + +// FListXattrResp is used to respond to FListXattr requests. +type FListXattrResp struct { + Xattrs StringArray +} + +// SizeBytes implements marshal.Marshallable.SizeBytes. +func (l *FListXattrResp) SizeBytes() int { + return l.Xattrs.SizeBytes() +} + +// MarshalBytes implements marshal.Marshallable.MarshalBytes. +func (l *FListXattrResp) MarshalBytes(dst []byte) { + l.Xattrs.MarshalBytes(dst) +} + +// UnmarshalBytes implements marshal.Marshallable.UnmarshalBytes. +func (l *FListXattrResp) UnmarshalBytes(src []byte) { + l.Xattrs.UnmarshalBytes(src) +} |