diff options
Diffstat (limited to 'pkg/cpuid/cpuid_x86.go')
| -rw-r--r-- | pkg/cpuid/cpuid_x86.go | 1111 |
1 files changed, 1111 insertions, 0 deletions
diff --git a/pkg/cpuid/cpuid_x86.go b/pkg/cpuid/cpuid_x86.go new file mode 100644 index 000000000..17a89c00d --- /dev/null +++ b/pkg/cpuid/cpuid_x86.go @@ -0,0 +1,1111 @@ +// Copyright 2019 The gVisor Authors. +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +// +build 386 amd64 + +package cpuid + +import ( + "bytes" + "fmt" + "io/ioutil" + "strconv" + "strings" + + "gvisor.dev/gvisor/pkg/log" +) + +// Common references for CPUID leaves and bits: +// +// Intel: +// * Intel SDM Volume 2, Chapter 3.2 "CPUID" (more up-to-date) +// * Intel Application Note 485 (more detailed) +// +// AMD: +// * AMD64 APM Volume 3, Appendix 3 "Obtaining Processor Information ..." + +// block is a collection of 32 Feature bits. +type block int + +const blockSize = 32 + +// Feature bits are numbered according to "blocks". Each block is 32 bits, and +// feature bits from the same source (cpuid leaf/level) are in the same block. +func featureID(b block, bit int) Feature { + return Feature(32*int(b) + bit) +} + +// Block 0 constants are all of the "basic" feature bits returned by a cpuid in +// ecx with eax=1. +const ( + X86FeatureSSE3 Feature = iota + X86FeaturePCLMULDQ + X86FeatureDTES64 + X86FeatureMONITOR + X86FeatureDSCPL + X86FeatureVMX + X86FeatureSMX + X86FeatureEST + X86FeatureTM2 + X86FeatureSSSE3 // Not a typo, "supplemental" SSE3. + X86FeatureCNXTID + X86FeatureSDBG + X86FeatureFMA + X86FeatureCX16 + X86FeatureXTPR + X86FeaturePDCM + _ // ecx bit 16 is reserved. + X86FeaturePCID + X86FeatureDCA + X86FeatureSSE4_1 + X86FeatureSSE4_2 + X86FeatureX2APIC + X86FeatureMOVBE + X86FeaturePOPCNT + X86FeatureTSCD + X86FeatureAES + X86FeatureXSAVE + X86FeatureOSXSAVE + X86FeatureAVX + X86FeatureF16C + X86FeatureRDRAND + _ // ecx bit 31 is reserved. +) + +// Block 1 constants are all of the "basic" feature bits returned by a cpuid in +// edx with eax=1. +const ( + X86FeatureFPU Feature = 32 + iota + X86FeatureVME + X86FeatureDE + X86FeaturePSE + X86FeatureTSC + X86FeatureMSR + X86FeaturePAE + X86FeatureMCE + X86FeatureCX8 + X86FeatureAPIC + _ // edx bit 10 is reserved. + X86FeatureSEP + X86FeatureMTRR + X86FeaturePGE + X86FeatureMCA + X86FeatureCMOV + X86FeaturePAT + X86FeaturePSE36 + X86FeaturePSN + X86FeatureCLFSH + _ // edx bit 20 is reserved. + X86FeatureDS + X86FeatureACPI + X86FeatureMMX + X86FeatureFXSR + X86FeatureSSE + X86FeatureSSE2 + X86FeatureSS + X86FeatureHTT + X86FeatureTM + X86FeatureIA64 + X86FeaturePBE +) + +// Block 2 bits are the "structured extended" features returned in ebx for +// eax=7, ecx=0. +const ( + X86FeatureFSGSBase Feature = 2*32 + iota + X86FeatureTSC_ADJUST + _ // ebx bit 2 is reserved. + X86FeatureBMI1 + X86FeatureHLE + X86FeatureAVX2 + X86FeatureFDP_EXCPTN_ONLY + X86FeatureSMEP + X86FeatureBMI2 + X86FeatureERMS + X86FeatureINVPCID + X86FeatureRTM + X86FeatureCQM + X86FeatureFPCSDS + X86FeatureMPX + X86FeatureRDT + X86FeatureAVX512F + X86FeatureAVX512DQ + X86FeatureRDSEED + X86FeatureADX + X86FeatureSMAP + X86FeatureAVX512IFMA + X86FeaturePCOMMIT + X86FeatureCLFLUSHOPT + X86FeatureCLWB + X86FeatureIPT // Intel processor trace. + X86FeatureAVX512PF + X86FeatureAVX512ER + X86FeatureAVX512CD + X86FeatureSHA + X86FeatureAVX512BW + X86FeatureAVX512VL +) + +// Block 3 bits are the "extended" features returned in ecx for eax=7, ecx=0. +const ( + X86FeaturePREFETCHWT1 Feature = 3*32 + iota + X86FeatureAVX512VBMI + X86FeatureUMIP + X86FeaturePKU + X86FeatureOSPKE + X86FeatureWAITPKG + X86FeatureAVX512_VBMI2 + _ // ecx bit 7 is reserved + X86FeatureGFNI + X86FeatureVAES + X86FeatureVPCLMULQDQ + X86FeatureAVX512_VNNI + X86FeatureAVX512_BITALG + X86FeatureTME + X86FeatureAVX512_VPOPCNTDQ + _ // ecx bit 15 is reserved + X86FeatureLA57 + // ecx bits 17-21 are reserved + _ + _ + _ + _ + _ + X86FeatureRDPID + // ecx bits 23-24 are reserved + _ + _ + X86FeatureCLDEMOTE + _ // ecx bit 26 is reserved + X86FeatureMOVDIRI + X86FeatureMOVDIR64B +) + +// Block 4 constants are for xsave capabilities in CPUID.(EAX=0DH,ECX=01H):EAX. +// The CPUID leaf is available only if 'X86FeatureXSAVE' is present. +const ( + X86FeatureXSAVEOPT Feature = 4*32 + iota + X86FeatureXSAVEC + X86FeatureXGETBV1 + X86FeatureXSAVES + // EAX[31:4] are reserved. +) + +// Block 5 constants are the extended feature bits in +// CPUID.(EAX=0x80000001):ECX. +const ( + X86FeatureLAHF64 Feature = 5*32 + iota + X86FeatureCMP_LEGACY + X86FeatureSVM + X86FeatureEXTAPIC + X86FeatureCR8_LEGACY + X86FeatureLZCNT + X86FeatureSSE4A + X86FeatureMISALIGNSSE + X86FeaturePREFETCHW + X86FeatureOSVW + X86FeatureIBS + X86FeatureXOP + X86FeatureSKINIT + X86FeatureWDT + _ // ecx bit 14 is reserved. + X86FeatureLWP + X86FeatureFMA4 + X86FeatureTCE + _ // ecx bit 18 is reserved. + _ // ecx bit 19 is reserved. + _ // ecx bit 20 is reserved. + X86FeatureTBM + X86FeatureTOPOLOGY + X86FeaturePERFCTR_CORE + X86FeaturePERFCTR_NB + _ // ecx bit 25 is reserved. + X86FeatureBPEXT + X86FeaturePERFCTR_TSC + X86FeaturePERFCTR_LLC + X86FeatureMWAITX + // TODO(b/152776797): Some CPUs set this but it is not documented anywhere. + X86FeatureBlock5Bit30 + _ // ecx bit 31 is reserved. +) + +// Block 6 constants are the extended feature bits in +// CPUID.(EAX=0x80000001):EDX. +// +// These are sparse, and so the bit positions are assigned manually. +const ( + // On AMD, EDX[24:23] | EDX[17:12] | EDX[9:0] are duplicate features + // also defined in block 1 (in identical bit positions). Those features + // are not listed here. + block6DuplicateMask = 0x183f3ff + + X86FeatureSYSCALL Feature = 6*32 + 11 + X86FeatureNX Feature = 6*32 + 20 + X86FeatureMMXEXT Feature = 6*32 + 22 + X86FeatureFXSR_OPT Feature = 6*32 + 25 + X86FeatureGBPAGES Feature = 6*32 + 26 + X86FeatureRDTSCP Feature = 6*32 + 27 + X86FeatureLM Feature = 6*32 + 29 + X86Feature3DNOWEXT Feature = 6*32 + 30 + X86Feature3DNOW Feature = 6*32 + 31 +) + +// linuxBlockOrder defines the order in which linux organizes the feature +// blocks. Linux also tracks feature bits in 32-bit blocks, but in an order +// which doesn't match well here, so for the /proc/cpuinfo generation we simply +// re-map the blocks to Linux's ordering and then go through the bits in each +// block. +var linuxBlockOrder = []block{1, 6, 0, 5, 2, 4, 3} + +// To make emulation of /proc/cpuinfo easy, these names match the names of the +// basic features in Linux defined in arch/x86/kernel/cpu/capflags.c. +var x86FeatureStrings = map[Feature]string{ + // Block 0. + X86FeatureSSE3: "pni", + X86FeaturePCLMULDQ: "pclmulqdq", + X86FeatureDTES64: "dtes64", + X86FeatureMONITOR: "monitor", + X86FeatureDSCPL: "ds_cpl", + X86FeatureVMX: "vmx", + X86FeatureSMX: "smx", + X86FeatureEST: "est", + X86FeatureTM2: "tm2", + X86FeatureSSSE3: "ssse3", + X86FeatureCNXTID: "cid", + X86FeatureSDBG: "sdbg", + X86FeatureFMA: "fma", + X86FeatureCX16: "cx16", + X86FeatureXTPR: "xtpr", + X86FeaturePDCM: "pdcm", + X86FeaturePCID: "pcid", + X86FeatureDCA: "dca", + X86FeatureSSE4_1: "sse4_1", + X86FeatureSSE4_2: "sse4_2", + X86FeatureX2APIC: "x2apic", + X86FeatureMOVBE: "movbe", + X86FeaturePOPCNT: "popcnt", + X86FeatureTSCD: "tsc_deadline_timer", + X86FeatureAES: "aes", + X86FeatureXSAVE: "xsave", + X86FeatureAVX: "avx", + X86FeatureF16C: "f16c", + X86FeatureRDRAND: "rdrand", + + // Block 1. + X86FeatureFPU: "fpu", + X86FeatureVME: "vme", + X86FeatureDE: "de", + X86FeaturePSE: "pse", + X86FeatureTSC: "tsc", + X86FeatureMSR: "msr", + X86FeaturePAE: "pae", + X86FeatureMCE: "mce", + X86FeatureCX8: "cx8", + X86FeatureAPIC: "apic", + X86FeatureSEP: "sep", + X86FeatureMTRR: "mtrr", + X86FeaturePGE: "pge", + X86FeatureMCA: "mca", + X86FeatureCMOV: "cmov", + X86FeaturePAT: "pat", + X86FeaturePSE36: "pse36", + X86FeaturePSN: "pn", + X86FeatureCLFSH: "clflush", + X86FeatureDS: "dts", + X86FeatureACPI: "acpi", + X86FeatureMMX: "mmx", + X86FeatureFXSR: "fxsr", + X86FeatureSSE: "sse", + X86FeatureSSE2: "sse2", + X86FeatureSS: "ss", + X86FeatureHTT: "ht", + X86FeatureTM: "tm", + X86FeatureIA64: "ia64", + X86FeaturePBE: "pbe", + + // Block 2. + X86FeatureFSGSBase: "fsgsbase", + X86FeatureTSC_ADJUST: "tsc_adjust", + X86FeatureBMI1: "bmi1", + X86FeatureHLE: "hle", + X86FeatureAVX2: "avx2", + X86FeatureSMEP: "smep", + X86FeatureBMI2: "bmi2", + X86FeatureERMS: "erms", + X86FeatureINVPCID: "invpcid", + X86FeatureRTM: "rtm", + X86FeatureCQM: "cqm", + X86FeatureMPX: "mpx", + X86FeatureRDT: "rdt_a", + X86FeatureAVX512F: "avx512f", + X86FeatureAVX512DQ: "avx512dq", + X86FeatureRDSEED: "rdseed", + X86FeatureADX: "adx", + X86FeatureSMAP: "smap", + X86FeatureCLWB: "clwb", + X86FeatureAVX512PF: "avx512pf", + X86FeatureAVX512ER: "avx512er", + X86FeatureAVX512CD: "avx512cd", + X86FeatureSHA: "sha_ni", + X86FeatureAVX512BW: "avx512bw", + X86FeatureAVX512VL: "avx512vl", + + // Block 3. + X86FeatureAVX512VBMI: "avx512vbmi", + X86FeatureUMIP: "umip", + X86FeaturePKU: "pku", + X86FeatureOSPKE: "ospke", + X86FeatureWAITPKG: "waitpkg", + X86FeatureAVX512_VBMI2: "avx512_vbmi2", + X86FeatureGFNI: "gfni", + X86FeatureVAES: "vaes", + X86FeatureVPCLMULQDQ: "vpclmulqdq", + X86FeatureAVX512_VNNI: "avx512_vnni", + X86FeatureAVX512_BITALG: "avx512_bitalg", + X86FeatureTME: "tme", + X86FeatureAVX512_VPOPCNTDQ: "avx512_vpopcntdq", + X86FeatureLA57: "la57", + X86FeatureRDPID: "rdpid", + X86FeatureCLDEMOTE: "cldemote", + X86FeatureMOVDIRI: "movdiri", + X86FeatureMOVDIR64B: "movdir64b", + + // Block 4. + X86FeatureXSAVEOPT: "xsaveopt", + X86FeatureXSAVEC: "xsavec", + X86FeatureXGETBV1: "xgetbv1", + X86FeatureXSAVES: "xsaves", + + // Block 5. + X86FeatureLAHF64: "lahf_lm", // LAHF/SAHF in long mode + X86FeatureCMP_LEGACY: "cmp_legacy", + X86FeatureSVM: "svm", + X86FeatureEXTAPIC: "extapic", + X86FeatureCR8_LEGACY: "cr8_legacy", + X86FeatureLZCNT: "abm", // Advanced bit manipulation + X86FeatureSSE4A: "sse4a", + X86FeatureMISALIGNSSE: "misalignsse", + X86FeaturePREFETCHW: "3dnowprefetch", + X86FeatureOSVW: "osvw", + X86FeatureIBS: "ibs", + X86FeatureXOP: "xop", + X86FeatureSKINIT: "skinit", + X86FeatureWDT: "wdt", + X86FeatureLWP: "lwp", + X86FeatureFMA4: "fma4", + X86FeatureTCE: "tce", + X86FeatureTBM: "tbm", + X86FeatureTOPOLOGY: "topoext", + X86FeaturePERFCTR_CORE: "perfctr_core", + X86FeaturePERFCTR_NB: "perfctr_nb", + X86FeatureBPEXT: "bpext", + X86FeaturePERFCTR_TSC: "ptsc", + X86FeaturePERFCTR_LLC: "perfctr_llc", + X86FeatureMWAITX: "mwaitx", + + // Block 6. + X86FeatureSYSCALL: "syscall", + X86FeatureNX: "nx", + X86FeatureMMXEXT: "mmxext", + X86FeatureFXSR_OPT: "fxsr_opt", + X86FeatureGBPAGES: "pdpe1gb", + X86FeatureRDTSCP: "rdtscp", + X86FeatureLM: "lm", + X86Feature3DNOWEXT: "3dnowext", + X86Feature3DNOW: "3dnow", +} + +// These flags are parse only---they can be used for setting / unsetting the +// flags, but will not get printed out in /proc/cpuinfo. +var x86FeatureParseOnlyStrings = map[Feature]string{ + // Block 0. + X86FeatureOSXSAVE: "osxsave", + + // Block 2. + X86FeatureFDP_EXCPTN_ONLY: "fdp_excptn_only", + X86FeatureFPCSDS: "fpcsds", + X86FeatureIPT: "pt", + X86FeatureCLFLUSHOPT: "clfushopt", + + // Block 3. + X86FeaturePREFETCHWT1: "prefetchwt1", + + // Block 5. + X86FeatureBlock5Bit30: "block5_bit30", +} + +// intelCacheDescriptors describe the caches and TLBs on the system. They are +// returned in the registers for eax=2. Intel only. +type intelCacheDescriptor uint8 + +// Valid cache/TLB descriptors. All descriptors can be found in Intel SDM Vol. +// 2, Ch. 3.2, "CPUID", Table 3-12 "Encoding of CPUID Leaf 2 Descriptors". +const ( + intelNullDescriptor intelCacheDescriptor = 0 + intelNoTLBDescriptor intelCacheDescriptor = 0xfe + intelNoCacheDescriptor intelCacheDescriptor = 0xff + + // Most descriptors omitted for brevity as they are currently unused. +) + +// CacheType describes the type of a cache, as returned in eax[4:0] for eax=4. +type CacheType uint8 + +const ( + // cacheNull indicates that there are no more entries. + cacheNull CacheType = iota + + // CacheData is a data cache. + CacheData + + // CacheInstruction is an instruction cache. + CacheInstruction + + // CacheUnified is a unified instruction and data cache. + CacheUnified +) + +// Cache describes the parameters of a single cache on the system. +// +// +stateify savable +type Cache struct { + // Level is the hierarchical level of this cache (L1, L2, etc). + Level uint32 + + // Type is the type of cache. + Type CacheType + + // FullyAssociative indicates that entries may be placed in any block. + FullyAssociative bool + + // Partitions is the number of physical partitions in the cache. + Partitions uint32 + + // Ways is the number of ways of associativity in the cache. + Ways uint32 + + // Sets is the number of sets in the cache. + Sets uint32 + + // InvalidateHierarchical indicates that WBINVD/INVD from threads + // sharing this cache acts upon lower level caches for threads sharing + // this cache. + InvalidateHierarchical bool + + // Inclusive indicates that this cache is inclusive of lower cache + // levels. + Inclusive bool + + // DirectMapped indicates that this cache is directly mapped from + // address, rather than using a hash function. + DirectMapped bool +} + +// Just a way to wrap cpuid function numbers. +type cpuidFunction uint32 + +// The constants below are the lower or "standard" cpuid functions, ordered as +// defined by the hardware. +const ( + vendorID cpuidFunction = iota // Returns vendor ID and largest standard function. + featureInfo // Returns basic feature bits and processor signature. + intelCacheDescriptors // Returns list of cache descriptors. Intel only. + intelSerialNumber // Returns processor serial number (obsolete on new hardware). Intel only. + intelDeterministicCacheParams // Returns deterministic cache information. Intel only. + monitorMwaitParams // Returns information about monitor/mwait instructions. + powerParams // Returns information about power management and thermal sensors. + extendedFeatureInfo // Returns extended feature bits. + _ // Function 0x8 is reserved. + intelDCAParams // Returns direct cache access information. Intel only. + intelPMCInfo // Returns information about performance monitoring features. Intel only. + intelX2APICInfo // Returns core/logical processor topology. Intel only. + _ // Function 0xc is reserved. + xSaveInfo // Returns information about extended state management. +) + +// The "extended" functions start at 0x80000000. +const ( + extendedFunctionInfo cpuidFunction = 0x80000000 + iota // Returns highest available extended function in eax. + extendedFeatures // Returns some extended feature bits in edx and ecx. +) + +// These are the extended floating point state features. They are used to +// enumerate floating point features in XCR0, XSTATE_BV, etc. +const ( + XSAVEFeatureX87 = 1 << 0 + XSAVEFeatureSSE = 1 << 1 + XSAVEFeatureAVX = 1 << 2 + XSAVEFeatureBNDREGS = 1 << 3 + XSAVEFeatureBNDCSR = 1 << 4 + XSAVEFeatureAVX512op = 1 << 5 + XSAVEFeatureAVX512zmm0 = 1 << 6 + XSAVEFeatureAVX512zmm16 = 1 << 7 + XSAVEFeaturePKRU = 1 << 9 +) + +var cpuFreqMHz float64 + +// x86FeaturesFromString includes features from x86FeatureStrings and +// x86FeatureParseOnlyStrings. +var x86FeaturesFromString = make(map[string]Feature) + +// FeatureFromString returns the Feature associated with the given feature +// string plus a bool to indicate if it could find the feature. +func FeatureFromString(s string) (Feature, bool) { + f, b := x86FeaturesFromString[s] + return f, b +} + +// String implements fmt.Stringer. +func (f Feature) String() string { + if s := f.flagString(false); s != "" { + return s + } + + block := int(f) / 32 + bit := int(f) % 32 + return fmt.Sprintf("<cpuflag %d; block %d bit %d>", f, block, bit) +} + +func (f Feature) flagString(cpuinfoOnly bool) string { + if s, ok := x86FeatureStrings[f]; ok { + return s + } + if !cpuinfoOnly { + return x86FeatureParseOnlyStrings[f] + } + return "" +} + +// FeatureSet is a set of Features for a CPU. +// +// +stateify savable +type FeatureSet struct { + // Set is the set of features that are enabled in this FeatureSet. + Set map[Feature]bool + + // VendorID is the 12-char string returned in ebx:edx:ecx for eax=0. + VendorID string + + // ExtendedFamily is part of the processor signature. + ExtendedFamily uint8 + + // ExtendedModel is part of the processor signature. + ExtendedModel uint8 + + // ProcessorType is part of the processor signature. + ProcessorType uint8 + + // Family is part of the processor signature. + Family uint8 + + // Model is part of the processor signature. + Model uint8 + + // SteppingID is part of the processor signature. + SteppingID uint8 + + // Caches describes the caches on the CPU. + Caches []Cache + + // CacheLine is the size of a cache line in bytes. + // + // All caches use the same line size. This is not enforced in the CPUID + // encoding, but is true on all known x86 processors. + CacheLine uint32 +} + +// FlagsString prints out supported CPU flags. If cpuinfoOnly is true, it is +// equivalent to the "flags" field in /proc/cpuinfo. +func (fs *FeatureSet) FlagsString(cpuinfoOnly bool) string { + var s []string + for _, b := range linuxBlockOrder { + for i := 0; i < blockSize; i++ { + if f := featureID(b, i); fs.Set[f] { + if fstr := f.flagString(cpuinfoOnly); fstr != "" { + s = append(s, fstr) + } + } + } + } + return strings.Join(s, " ") +} + +// WriteCPUInfoTo is to generate a section of one cpu in /proc/cpuinfo. This is +// a minimal /proc/cpuinfo, it is missing some fields like "microcode" that are +// not always printed in Linux. The bogomips field is simply made up. +func (fs FeatureSet) WriteCPUInfoTo(cpu uint, b *bytes.Buffer) { + fmt.Fprintf(b, "processor\t: %d\n", cpu) + fmt.Fprintf(b, "vendor_id\t: %s\n", fs.VendorID) + fmt.Fprintf(b, "cpu family\t: %d\n", ((fs.ExtendedFamily<<4)&0xff)|fs.Family) + fmt.Fprintf(b, "model\t\t: %d\n", ((fs.ExtendedModel<<4)&0xff)|fs.Model) + fmt.Fprintf(b, "model name\t: %s\n", "unknown") // Unknown for now. + fmt.Fprintf(b, "stepping\t: %s\n", "unknown") // Unknown for now. + fmt.Fprintf(b, "cpu MHz\t\t: %.3f\n", cpuFreqMHz) + fmt.Fprintln(b, "fpu\t\t: yes") + fmt.Fprintln(b, "fpu_exception\t: yes") + fmt.Fprintf(b, "cpuid level\t: %d\n", uint32(xSaveInfo)) // Same as ax in vendorID. + fmt.Fprintln(b, "wp\t\t: yes") + fmt.Fprintf(b, "flags\t\t: %s\n", fs.FlagsString(true)) + fmt.Fprintf(b, "bogomips\t: %.02f\n", cpuFreqMHz) // It's bogus anyway. + fmt.Fprintf(b, "clflush size\t: %d\n", fs.CacheLine) + fmt.Fprintf(b, "cache_alignment\t: %d\n", fs.CacheLine) + fmt.Fprintf(b, "address sizes\t: %d bits physical, %d bits virtual\n", 46, 48) + fmt.Fprintln(b, "power management:") // This is always here, but can be blank. + fmt.Fprintln(b, "") // The /proc/cpuinfo file ends with an extra newline. +} + +const ( + amdVendorID = "AuthenticAMD" + intelVendorID = "GenuineIntel" +) + +// AMD returns true if fs describes an AMD CPU. +func (fs *FeatureSet) AMD() bool { + return fs.VendorID == amdVendorID +} + +// Intel returns true if fs describes an Intel CPU. +func (fs *FeatureSet) Intel() bool { + return fs.VendorID == intelVendorID +} + +// ErrIncompatible is returned by FeatureSet.HostCompatible if fs is not a +// subset of the host feature set. +type ErrIncompatible struct { + message string +} + +// Error implements error. +func (e ErrIncompatible) Error() string { + return e.message +} + +// CheckHostCompatible returns nil if fs is a subset of the host feature set. +func (fs *FeatureSet) CheckHostCompatible() error { + hfs := HostFeatureSet() + + if diff := fs.Subtract(hfs); diff != nil { + return ErrIncompatible{fmt.Sprintf("CPU feature set %v incompatible with host feature set %v (missing: %v)", fs.FlagsString(false), hfs.FlagsString(false), diff)} + } + + // The size of a cache line must match, as it is critical to correctly + // utilizing CLFLUSH. Other cache properties are allowed to change, as + // they are not important to correctness. + if fs.CacheLine != hfs.CacheLine { + return ErrIncompatible{fmt.Sprintf("CPU cache line size %d incompatible with host cache line size %d", fs.CacheLine, hfs.CacheLine)} + } + + return nil +} + +// Helper to convert 3 regs into 12-byte vendor ID. +func vendorIDFromRegs(bx, cx, dx uint32) string { + bytes := make([]byte, 0, 12) + for i := uint(0); i < 4; i++ { + b := byte(bx >> (i * 8)) + bytes = append(bytes, b) + } + + for i := uint(0); i < 4; i++ { + b := byte(dx >> (i * 8)) + bytes = append(bytes, b) + } + + for i := uint(0); i < 4; i++ { + b := byte(cx >> (i * 8)) + bytes = append(bytes, b) + } + return string(bytes) +} + +var maxXsaveSize = func() uint32 { + // Leaf 0 of xsaveinfo function returns the size for currently + // enabled xsave features in ebx, the maximum size if all valid + // features are saved with xsave in ecx, and valid XCR0 bits in + // edx:eax. + // + // If xSaveInfo isn't supported, cpuid will not fault but will + // return bogus values. + _, _, maxXsaveSize, _ := HostID(uint32(xSaveInfo), 0) + return maxXsaveSize +}() + +// ExtendedStateSize returns the number of bytes needed to save the "extended +// state" for this processor and the boundary it must be aligned to. Extended +// state includes floating point registers, and other cpu state that's not +// associated with the normal task context. +// +// Note: We can save some space here with an optimization where we use a +// smaller chunk of memory depending on features that are actually enabled. +// Currently we just use the largest possible size for simplicity (which is +// about 2.5K worst case, with avx512). +func (fs *FeatureSet) ExtendedStateSize() (size, align uint) { + if fs.UseXsave() { + return uint(maxXsaveSize), 64 + } + + // If we don't support xsave, we fall back to fxsave, which requires + // 512 bytes aligned to 16 bytes. + return 512, 16 +} + +// ValidXCR0Mask returns the bits that may be set to 1 in control register +// XCR0. +func (fs *FeatureSet) ValidXCR0Mask() uint64 { + if !fs.UseXsave() { + return 0 + } + eax, _, _, edx := HostID(uint32(xSaveInfo), 0) + return uint64(edx)<<32 | uint64(eax) +} + +// vendorIDRegs returns the 3 register values used to construct the 12-byte +// vendor ID string for eax=0. +func (fs *FeatureSet) vendorIDRegs() (bx, dx, cx uint32) { + for i := uint(0); i < 4; i++ { + bx |= uint32(fs.VendorID[i]) << (i * 8) + } + + for i := uint(0); i < 4; i++ { + dx |= uint32(fs.VendorID[i+4]) << (i * 8) + } + + for i := uint(0); i < 4; i++ { + cx |= uint32(fs.VendorID[i+8]) << (i * 8) + } + return +} + +// signature returns the signature dword that's returned in eax when eax=1. +func (fs *FeatureSet) signature() uint32 { + var s uint32 + s |= uint32(fs.SteppingID & 0xf) + s |= uint32(fs.Model&0xf) << 4 + s |= uint32(fs.Family&0xf) << 8 + s |= uint32(fs.ProcessorType&0x3) << 12 + s |= uint32(fs.ExtendedModel&0xf) << 16 + s |= uint32(fs.ExtendedFamily&0xff) << 20 + return s +} + +// Helper to deconstruct signature dword. +func signatureSplit(v uint32) (ef, em, pt, f, m, sid uint8) { + sid = uint8(v & 0xf) + m = uint8(v>>4) & 0xf + f = uint8(v>>8) & 0xf + pt = uint8(v>>12) & 0x3 + em = uint8(v>>16) & 0xf + ef = uint8(v >> 20) + return +} + +// Helper to convert blockwise feature bit masks into a set of features. Masks +// must be provided in order for each block, without skipping them. If a block +// does not matter for this feature set, 0 is specified. +func setFromBlockMasks(blocks ...uint32) map[Feature]bool { + s := make(map[Feature]bool) + for b, blockMask := range blocks { + for i := 0; i < blockSize; i++ { + if blockMask&1 != 0 { + s[featureID(block(b), i)] = true + } + blockMask >>= 1 + } + } + return s +} + +// blockMask returns the 32-bit mask associated with a block of features. +func (fs *FeatureSet) blockMask(b block) uint32 { + var mask uint32 + for i := 0; i < blockSize; i++ { + if fs.Set[featureID(b, i)] { + mask |= 1 << uint(i) + } + } + return mask +} + +// Remove removes a Feature from a FeatureSet. It ignores features +// that are not in the FeatureSet. +func (fs *FeatureSet) Remove(feature Feature) { + delete(fs.Set, feature) +} + +// Add adds a Feature to a FeatureSet. It ignores duplicate features. +func (fs *FeatureSet) Add(feature Feature) { + fs.Set[feature] = true +} + +// HasFeature tests whether or not a feature is in the given feature set. +func (fs *FeatureSet) HasFeature(feature Feature) bool { + return fs.Set[feature] +} + +// Subtract returns the features present in fs that are not present in other. +// If all features in fs are present in other, Subtract returns nil. +func (fs *FeatureSet) Subtract(other *FeatureSet) (diff map[Feature]bool) { + for f := range fs.Set { + if !other.Set[f] { + if diff == nil { + diff = make(map[Feature]bool) + } + diff[f] = true + } + } + + return +} + +// EmulateID emulates a cpuid instruction based on the feature set. +func (fs *FeatureSet) EmulateID(origAx, origCx uint32) (ax, bx, cx, dx uint32) { + switch cpuidFunction(origAx) { + case vendorID: + ax = uint32(xSaveInfo) // 0xd (xSaveInfo) is the highest function we support. + bx, dx, cx = fs.vendorIDRegs() + case featureInfo: + // CLFLUSH line size is encoded in quadwords. Other fields in bx unsupported. + bx = (fs.CacheLine / 8) << 8 + cx = fs.blockMask(block(0)) + dx = fs.blockMask(block(1)) + ax = fs.signature() + case intelCacheDescriptors: + if !fs.Intel() { + // Reserved on non-Intel. + return 0, 0, 0, 0 + } + + // "The least-significant byte in register EAX (register AL) + // will always return 01H. Software should ignore this value + // and not interpret it as an informational descriptor." - SDM + // + // We only support reporting cache parameters via + // intelDeterministicCacheParams; report as much here. + // + // We do not support exposing TLB information at all. + ax = 1 | (uint32(intelNoCacheDescriptor) << 8) + case intelDeterministicCacheParams: + if !fs.Intel() { + // Reserved on non-Intel. + return 0, 0, 0, 0 + } + + // cx is the index of the cache to describe. + if int(origCx) >= len(fs.Caches) { + return uint32(cacheNull), 0, 0, 0 + } + c := fs.Caches[origCx] + + ax = uint32(c.Type) + ax |= c.Level << 5 + ax |= 1 << 8 // Always claim the cache is "self-initializing". + if c.FullyAssociative { + ax |= 1 << 9 + } + // Processor topology not supported. + + bx = fs.CacheLine - 1 + bx |= (c.Partitions - 1) << 12 + bx |= (c.Ways - 1) << 22 + + cx = c.Sets - 1 + + if !c.InvalidateHierarchical { + dx |= 1 + } + if c.Inclusive { + dx |= 1 << 1 + } + if !c.DirectMapped { + dx |= 1 << 2 + } + case xSaveInfo: + if !fs.UseXsave() { + return 0, 0, 0, 0 + } + return HostID(uint32(xSaveInfo), origCx) + case extendedFeatureInfo: + if origCx != 0 { + break // Only leaf 0 is supported. + } + bx = fs.blockMask(block(2)) + cx = fs.blockMask(block(3)) + case extendedFunctionInfo: + // We only support showing the extended features. + ax = uint32(extendedFeatures) + cx = 0 + case extendedFeatures: + cx = fs.blockMask(block(5)) + dx = fs.blockMask(block(6)) + if fs.AMD() { + // AMD duplicates some block 1 features in block 6. + dx |= fs.blockMask(block(1)) & block6DuplicateMask + } + } + + return +} + +// UseXsave returns the choice of fp state saving instruction. +func (fs *FeatureSet) UseXsave() bool { + return fs.HasFeature(X86FeatureXSAVE) && fs.HasFeature(X86FeatureOSXSAVE) +} + +// UseXsaveopt returns true if 'fs' supports the "xsaveopt" instruction. +func (fs *FeatureSet) UseXsaveopt() bool { + return fs.UseXsave() && fs.HasFeature(X86FeatureXSAVEOPT) +} + +// HostID executes a native CPUID instruction. +func HostID(axArg, cxArg uint32) (ax, bx, cx, dx uint32) + +// HostFeatureSet uses cpuid to get host values and construct a feature set +// that matches that of the host machine. Note that there are several places +// where there appear to be some unnecessary assignments between register names +// (ax, bx, cx, or dx) and featureBlockN variables. This is to explicitly show +// where the different feature blocks come from, to make the code easier to +// inspect and read. +func HostFeatureSet() *FeatureSet { + // eax=0 gets max supported feature and vendor ID. + _, bx, cx, dx := HostID(0, 0) + vendorID := vendorIDFromRegs(bx, cx, dx) + + // eax=1 gets basic features in ecx:edx. + ax, bx, cx, dx := HostID(1, 0) + featureBlock0 := cx + featureBlock1 := dx + ef, em, pt, f, m, sid := signatureSplit(ax) + cacheLine := 8 * (bx >> 8) & 0xff + + // eax=4, ecx=i gets details about cache index i. Only supported on Intel. + var caches []Cache + if vendorID == intelVendorID { + // ecx selects the cache index until a null type is returned. + for i := uint32(0); ; i++ { + ax, bx, cx, dx := HostID(4, i) + t := CacheType(ax & 0xf) + if t == cacheNull { + break + } + + lineSize := (bx & 0xfff) + 1 + if lineSize != cacheLine { + panic(fmt.Sprintf("Mismatched cache line size: %d vs %d", lineSize, cacheLine)) + } + + caches = append(caches, Cache{ + Type: t, + Level: (ax >> 5) & 0x7, + FullyAssociative: ((ax >> 9) & 1) == 1, + Partitions: ((bx >> 12) & 0x3ff) + 1, + Ways: ((bx >> 22) & 0x3ff) + 1, + Sets: cx + 1, + InvalidateHierarchical: (dx & 1) == 0, + Inclusive: ((dx >> 1) & 1) == 1, + DirectMapped: ((dx >> 2) & 1) == 0, + }) + } + } + + // eax=7, ecx=0 gets extended features in ecx:ebx. + _, bx, cx, _ = HostID(7, 0) + featureBlock2 := bx + featureBlock3 := cx + + // Leaf 0xd is supported only if CPUID.1:ECX.XSAVE[bit 26] is set. + var featureBlock4 uint32 + if (featureBlock0 & (1 << 26)) != 0 { + featureBlock4, _, _, _ = HostID(uint32(xSaveInfo), 1) + } + + // eax=0x80000000 gets supported extended levels. We use this to + // determine if there are any non-zero block 4 or block 6 bits to find. + var featureBlock5, featureBlock6 uint32 + if ax, _, _, _ := HostID(uint32(extendedFunctionInfo), 0); ax >= uint32(extendedFeatures) { + // eax=0x80000001 gets AMD added feature bits. + _, _, cx, dx = HostID(uint32(extendedFeatures), 0) + featureBlock5 = cx + // Ignore features duplicated from block 1 on AMD. These bits + // are reserved on Intel. + featureBlock6 = dx &^ block6DuplicateMask + } + + set := setFromBlockMasks(featureBlock0, featureBlock1, featureBlock2, featureBlock3, featureBlock4, featureBlock5, featureBlock6) + return &FeatureSet{ + Set: set, + VendorID: vendorID, + ExtendedFamily: ef, + ExtendedModel: em, + ProcessorType: pt, + Family: f, + Model: m, + SteppingID: sid, + CacheLine: cacheLine, + Caches: caches, + } +} + +// Reads max cpu frequency from host /proc/cpuinfo. Must run before syscall +// filter installation. This value is used to create the fake /proc/cpuinfo +// from a FeatureSet. +func initCPUFreq() { + cpuinfob, err := ioutil.ReadFile("/proc/cpuinfo") + if err != nil { + // Leave it as 0... The standalone VDSO bails out in the same + // way. + log.Warningf("Could not read /proc/cpuinfo: %v", err) + return + } + cpuinfo := string(cpuinfob) + + // We get the value straight from host /proc/cpuinfo. On machines with + // frequency scaling enabled, this will only get the current value + // which will likely be inaccurate. This is fine on machines with + // frequency scaling disabled. + for _, line := range strings.Split(cpuinfo, "\n") { + if strings.Contains(line, "cpu MHz") { + splitMHz := strings.Split(line, ":") + if len(splitMHz) < 2 { + log.Warningf("Could not read /proc/cpuinfo: malformed cpu MHz line") + return + } + + // If there was a problem, leave cpuFreqMHz as 0. + var err error + cpuFreqMHz, err = strconv.ParseFloat(strings.TrimSpace(splitMHz[1]), 64) + if err != nil { + log.Warningf("Could not parse cpu MHz value %v: %v", splitMHz[1], err) + cpuFreqMHz = 0 + return + } + return + } + } + log.Warningf("Could not parse /proc/cpuinfo, it is empty or does not contain cpu MHz") +} + +func initFeaturesFromString() { + for f, s := range x86FeatureStrings { + x86FeaturesFromString[s] = f + } + for f, s := range x86FeatureParseOnlyStrings { + x86FeaturesFromString[s] = f + } +} + +func init() { + initCPUFreq() + initFeaturesFromString() +} |