diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 457 |
1 files changed, 0 insertions, 457 deletions
diff --git a/Makefile b/Makefile deleted file mode 100644 index 7fe0c9a21..000000000 --- a/Makefile +++ /dev/null @@ -1,457 +0,0 @@ -#!/usr/bin/make -f - -# Copyright 2019 The gVisor Authors. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. - -default: runsc -.PHONY: default - -# Header for debugging (used by other macros). -header = echo --- $(1) >&2 - -# Make hacks. -EMPTY := -SPACE := $(EMPTY) $(EMPTY) -SHELL = /bin/bash - -## usage: make <target> -## or -## make <build|test|copy|run|sudo> STARTUP_OPTIONS="..." OPTIONS="..." TARGETS="..." ARGS="..." -## -## Basic targets. -## -## This Makefile wraps basic build and test targets for ease-of-use. Bazel -## is run inside a canonical Docker container in order to simplify up-front -## requirements. -## -## There are common arguments that may be passed to targets. These are: -## OPTIONS - Build or test options. -## TARGETS - The bazel targets. -## ARGS - Arguments for run or sudo. -## -## Additionally, the copy target expects a DESTINATION to be provided. -## -## For example, to build runsc using this Makefile, you can run: -## make build OPTIONS="" TARGETS="//runsc"' -## -help: ## Shows all targets and help from the Makefile (this message). - @grep --no-filename -E '^([a-z.A-Z_%-]+:.*?|)##' $(MAKEFILE_LIST) | \ - awk 'BEGIN {FS = "(:.*?|)## ?"}; { \ - if (length($$1) > 0) { \ - printf " \033[36m%-20s\033[0m %s\n", $$1, $$2; \ - } else { \ - printf "%s\n", $$2; \ - } \ - }' - -build: ## Builds the given $(TARGETS) with the given $(OPTIONS). E.g. make build TARGETS=runsc - @$(call build,$(OPTIONS) $(TARGETS)) -.PHONY: build - -test: ## Tests the given $(TARGETS) with the given $(OPTIONS). E.g. make test TARGETS=pkg/buffer:buffer_test - @$(call test,$(OPTIONS) $(TARGETS)) -.PHONY: test - -copy: ## Copies the given $(TARGETS) to the given $(DESTINATION). E.g. make copy TARGETS=runsc DESTINATION=/tmp - @$(call copy,$(TARGETS),$(DESTINATION)) -.PHONY: copy - -run: ## Runs the given $(TARGETS), built with $(OPTIONS), using $(ARGS). E.g. make run TARGETS=runsc ARGS=-version - @$(call run,$(TARGETS),$(ARGS)) -.PHONY: run - -sudo: ## Runs the given $(TARGETS) as per run, but using "sudo -E". E.g. make sudo TARGETS=test/root:root_test ARGS=-test.v - @$(call sudo,$(TARGETS),$(ARGS)) -.PHONY: sudo - -# Load image helpers. -include tools/images.mk - -# Load all bazel wrappers. -# -# This file should define the basic "build", "test", "run" and "sudo" rules, in -# addition to the $(BRANCH_NAME) and $(BUILD_ROOTS) variables. -ifneq (,$(wildcard tools/google.mk)) -include tools/google.mk -else -include tools/bazel.mk -endif - -## -## Development helpers and tooling. -## -## These targets faciliate local development by automatically -## installing and configuring a runtime. Several variables may -## be used here to tweak the installation: -## RUNTIME - The name of the installed runtime (default: branch). -## RUNTIME_DIR - Where the runtime will be installed (default: temporary directory with the $RUNTIME). -## RUNTIME_BIN - The runtime binary (default: $RUNTIME_DIR/runsc). -## RUNTIME_LOG_DIR - The logs directory (default: $RUNTIME_DIR/logs). -## RUNTIME_LOGS - The log pattern (default: $RUNTIME_LOG_DIR/runsc.log.%TEST%.%TIMESTAMP%.%COMMAND%). -## -ifeq (,$(BRANCH_NAME)) -RUNTIME := runsc -RUNTIME_DIR := $(shell dirname $(shell mktemp -u))/$(RUNTIME) -else -RUNTIME := $(BRANCH_NAME) -RUNTIME_DIR := $(shell dirname $(shell mktemp -u))/$(RUNTIME) -endif -RUNTIME_BIN := $(RUNTIME_DIR)/runsc -RUNTIME_LOG_DIR := $(RUNTIME_DIR)/logs -RUNTIME_LOGS := $(RUNTIME_LOG_DIR)/runsc.log.%TEST%.%TIMESTAMP%.%COMMAND% - -$(RUNTIME_BIN): # See below. - @mkdir -p "$(RUNTIME_DIR)" - @$(call copy,//runsc,$(RUNTIME_BIN)) -.PHONY: $(RUNTIME_BIN) # Real file, but force rebuild. - -# Configure helpers for below. -configure_noreload = \ - $(call header,CONFIGURE $(1) → $(RUNTIME_BIN) $(2)); \ - sudo $(RUNTIME_BIN) install --experimental=true --runtime="$(1)" -- --debug-log "$(RUNTIME_LOGS)" $(2) && \ - sudo rm -rf "$(RUNTIME_LOG_DIR)" && mkdir -p "$(RUNTIME_LOG_DIR)" -reload_docker = \ - sudo systemctl reload docker && \ - if test -f /etc/docker/daemon.json; then \ - sudo chmod 0755 /etc/docker && \ - sudo chmod 0644 /etc/docker/daemon.json; \ - fi -configure = $(call configure_noreload,$(1),$(2)) && $(reload_docker) - -# Helpers for above. Requires $(RUNTIME_BIN) dependency. -install_runtime = $(call configure,$(1),$(2) --TESTONLY-test-name-env=RUNSC_TEST_NAME) -# Don't use cached results, otherwise multiple runs using different runtimes -# may be skipped, if all other inputs are the same. -test_runtime = $(call test,--test_arg=--runtime=$(1) --nocache_test_results $(PARTITIONS) $(2)) - -refresh: $(RUNTIME_BIN) ## Updates the runtime binary. -.PHONY: refresh - -dev: $(RUNTIME_BIN) ## Installs a set of local runtimes. Requires sudo. - @$(call configure_noreload,$(RUNTIME),--net-raw) - @$(call configure_noreload,$(RUNTIME)-d,--net-raw --debug --strace --log-packets) - @$(call configure_noreload,$(RUNTIME)-p,--net-raw --profile) - @$(call configure_noreload,$(RUNTIME)-vfs2-d,--net-raw --debug --strace --log-packets --vfs2) - @$(call configure_noreload,$(RUNTIME)-vfs2-fuse-d,--net-raw --debug --strace --log-packets --vfs2 --fuse) - @$(call configure_noreload,$(RUNTIME)-vfs2-cgroup-d,--net-raw --debug --strace --log-packets --vfs2 --cgroupfs) - @$(call reload_docker) -.PHONY: dev - -## -## Canonical build and test targets. -## -## These targets are used by continuous integration and provide -## convenient entrypoints for testing changes. If you're adding a -## new subsystem or workflow, consider adding a new target here. -## -## Some targets support a PARTITION (1-indexed) and TOTAL_PARTITIONS -## environment variables for high-level test sharding. Unlike most -## other variables, these are sourced from the environment. -## -PARTITION ?= 1 -TOTAL_PARTITIONS ?= 1 -PARTITIONS := --test_arg=--partition=$(PARTITION) --test_arg=--total_partitions=$(TOTAL_PARTITIONS) - -runsc: ## Builds the runsc binary. - @$(call build,-c opt //runsc) -.PHONY: runsc - -debian: ## Builds the debian packages. - @$(call build,-c opt //debian:debian) -.PHONY: debian - -smoke-tests: ## Runs a simple smoke test after build runsc. - @$(call run,//runsc,--alsologtostderr --network none --debug --TESTONLY-unsafe-nonroot=true --rootless do true) -.PHONY: smoke-tests - -nogo-tests: - @$(call test,--build_tag_filters=nogo --test_tag_filters=nogo //:all pkg/... tools/...) -.PHONY: nogo-tests - -unit-tests: ## Local package unit tests in pkg/..., tools/.., etc. - @$(call test,--build_tag_filters=-nogo --test_tag_filters=-nogo //:all pkg/... tools/...) -.PHONY: unit-tests - -runsc-tests: ## Run all tests in runsc/... - @$(call test,runsc/...) -.PHONY: runsc-tests - -tests: ## Runs all unit tests and syscall tests. -tests: unit-tests nogo-tests runsc-tests syscall-tests -.PHONY: tests - -integration-tests: ## Run all standard integration tests. -integration-tests: docker-tests overlay-tests hostnet-tests swgso-tests -integration-tests: do-tests kvm-tests containerd-test-1.3.9 -.PHONY: integration-tests - -network-tests: ## Run all networking integration tests. -network-tests: iptables-tests packetdrill-tests packetimpact-tests -.PHONY: network-tests - -# The set of system call targets. -SYSCALL_TARGETS := test/syscalls/... test/fuse/... - -syscall-%-tests: - @$(call test,--test_tag_filters=runsc_$* $(PARTITIONS) test/syscalls/...) - -syscall-native-tests: - @$(call test,--test_tag_filters=native $(PARTITIONS) test/syscalls/...) -.PHONY: syscall-native-tests - -syscall-tests: ## Run all system call tests. - @$(call test,$(PARTITIONS) $(SYSCALL_TARGETS)) -.PHONY: syscall-tests - -%-runtime-tests: load-runtimes_% $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),) # Ensure flags are cleared. - @$(call test_runtime,$(RUNTIME),--test_timeout=10800 //test/runtimes:$*) - -%-runtime-tests_vfs2: load-runtimes_% $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),--vfs2) - @$(call test_runtime,$(RUNTIME),--test_timeout=10800 //test/runtimes:$*) - -do-tests: - @$(call run,//runsc,--rootless do true) - @$(call run,//runsc,--rootless -network=none do true) - @$(call sudo,//runsc,do true) -.PHONY: do-tests - -arm-qemu-smoke-test: BAZEL_OPTIONS=--config=cross-aarch64 -arm-qemu-smoke-test: load-arm-qemu - export T=$$(mktemp -d --tmpdir release.XXXXXX); \ - mkdir -p $$T/bin/arm64/ && \ - $(call copy,//runsc:runsc,$$T/bin/arm64) && \ - docker run --rm -v $$T/bin/arm64/runsc:/workdir/initramfs/runsc gvisor.dev/images/arm-qemu -.PHONY: arm-qemu-smoke-test - -simple-tests: unit-tests # Compatibility target. -.PHONY: simple-tests - -# Standard integration targets. -INTEGRATION_TARGETS := //test/image:image_test //test/e2e:integration_test - -docker-tests: load-basic $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),) # Clear flags. - @$(call test_runtime,$(RUNTIME),$(INTEGRATION_TARGETS)) - @$(call install_runtime,$(RUNTIME),--vfs2) - @$(call test_runtime,$(RUNTIME),$(INTEGRATION_TARGETS)) -.PHONY: docker-tests - -overlay-tests: load-basic $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),--overlay) - @$(call test_runtime,$(RUNTIME),$(INTEGRATION_TARGETS)) -.PHONY: overlay-tests - -swgso-tests: load-basic $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),--software-gso=true --gso=false) - @$(call test_runtime,$(RUNTIME),$(INTEGRATION_TARGETS)) -.PHONY: swgso-tests - -hostnet-tests: load-basic $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),--network=host) - @$(call test_runtime,$(RUNTIME),--test_arg=-checkpoint=false --test_arg=-hostnet=true $(INTEGRATION_TARGETS)) -.PHONY: hostnet-tests - -kvm-tests: load-basic $(RUNTIME_BIN) - @(lsmod | grep -E '^(kvm_intel|kvm_amd)') || sudo modprobe kvm - @if ! test -w /dev/kvm; then sudo chmod a+rw /dev/kvm; fi - @$(call test,//pkg/sentry/platform/kvm:kvm_test) - @$(call install_runtime,$(RUNTIME),--platform=kvm) - @$(call test_runtime,$(RUNTIME),$(INTEGRATION_TARGETS)) -.PHONY: kvm-tests - -iptables-tests: load-iptables $(RUNTIME_BIN) - @sudo modprobe iptable_filter - @sudo modprobe ip6table_filter - @$(call test,--test_arg=-runtime=runc $(PARTITIONS) //test/iptables:iptables_test) - @$(call install_runtime,$(RUNTIME),--net-raw) - @$(call test_runtime,$(RUNTIME),//test/iptables:iptables_test) -.PHONY: iptables-tests - -packetdrill-tests: load-packetdrill $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),) # Clear flags. - @$(call test_runtime,$(RUNTIME),//test/packetdrill:all_tests) -.PHONY: packetdrill-tests - -packetimpact-tests: load-packetimpact $(RUNTIME_BIN) - @sudo modprobe iptable_filter - @sudo modprobe ip6table_filter - @$(call install_runtime,$(RUNTIME),) # Clear flags. - @$(call test_runtime,$(RUNTIME),--jobs=HOST_CPUS*3 --local_test_jobs=HOST_CPUS*3 //test/packetimpact/tests:all_tests) -.PHONY: packetimpact-tests - -fsstress-test: load-basic $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),--vfs2) - @$(call test_runtime,$(RUNTIME),//test/fsstress:fsstress_test) -.PHONY: fsstress-test - -# Specific containerd version tests. -containerd-test-%: load-basic_alpine load-basic_python load-basic_busybox load-basic_resolv load-basic_httpd load-basic_ubuntu $(RUNTIME_BIN) - @$(call install_runtime,$(RUNTIME),) # Clear flags. - @$(call sudo,tools/installers:containerd,$*) - @$(call sudo,tools/installers:shim) - @$(call sudo,test/root:root_test,--runtime=$(RUNTIME) -test.v) - -# The shim builds with containerd 1.3.9 and it's not backward compatible. Test -# with 1.3.9 and newer versions. -containerd-tests: ## Runs all supported containerd version tests. -containerd-tests: containerd-test-1.3.9 -containerd-tests: containerd-test-1.4.3 -containerd-tests: containerd-test-1.5.4 - -## -## Benchmarks. -## -## Targets to run benchmarks. See //test/benchmarks for details. -## -## common arguments: -## BENCHMARKS_PROJECT - BigQuery project to which to send data. -## BENCHMARKS_DATASET - BigQuery dataset to which to send data. -## BENCHMARKS_TABLE - BigQuery table to which to send data. -## BENCHMARKS_SUITE - name of the benchmark suite. See //tools/bigquery/bigquery.go. -## BENCHMARKS_UPLOAD - if true, upload benchmark data from the run. -## BENCHMARKS_OFFICIAL - marks the data as official. -## BENCHMARKS_PLATFORMS - platforms to run benchmarks (e.g. ptrace kvm). -## BENCHMARKS_FILTER - filter to be applied to the test suite. -## BENCHMARKS_OPTIONS - options to be passed to the test. -## BENCHMARKS_PROFILE - profile options to be passed to the test. -## BENCH_RUNTIME_ARGS - args to configure the runtime which runs the benchmarks. -## -BENCHMARKS_PROJECT ?= gvisor-benchmarks -BENCHMARKS_DATASET ?= kokoro -BENCHMARKS_TABLE ?= benchmarks -BENCHMARKS_SUITE ?= ffmpeg -BENCHMARKS_UPLOAD ?= false -BENCHMARKS_OFFICIAL ?= false -BENCHMARKS_PLATFORMS ?= ptrace -BENCHMARKS_TARGETS := //test/benchmarks/media:ffmpeg_test -BENCHMARKS_FILTER := . -BENCHMARKS_OPTIONS := -test.benchtime=30s -BENCHMARKS_ARGS := -test.v -test.bench=$(BENCHMARKS_FILTER) $(BENCHMARKS_OPTIONS) -BENCHMARKS_PROFILE := -pprof-dir=/tmp/profile -pprof-cpu -pprof-heap -pprof-block -pprof-mutex -BENCH_VFS := --vfs2 -BENCH_RUNTIME_ARGS ?= - -init-benchmark-table: ## Initializes a BigQuery table with the benchmark schema. - @$(call run,//tools/parsers:parser,init --project=$(BENCHMARKS_PROJECT) --dataset=$(BENCHMARKS_DATASET) --table=$(BENCHMARKS_TABLE)) -.PHONY: init-benchmark-table - -# $(1) is the runtime name, $(2) are the arguments. -run_benchmark = \ - ($(call header,BENCHMARK $(1) $(2)); \ - set -euo pipefail; \ - export T=$$(mktemp --tmpdir logs.$(1).XXXXXX); \ - if test "$(1)" = "runc"; then $(call sudo,$(BENCHMARKS_TARGETS),-runtime=$(1) $(BENCHMARKS_ARGS)) | tee $$T; fi; \ - if test "$(1)" != "runc"; then $(call install_runtime,$(1),--profile $(2)); \ - $(call sudo,$(BENCHMARKS_TARGETS),-runtime=$(1) $(BENCHMARKS_ARGS) $(BENCHMARKS_PROFILE)) | tee $$T; fi; \ - if test "$(BENCHMARKS_UPLOAD)" = "true"; then \ - $(call run,tools/parsers:parser,parse --debug --file=$$T --runtime=$(1) --suite_name=$(BENCHMARKS_SUITE) --project=$(BENCHMARKS_PROJECT) --dataset=$(BENCHMARKS_DATASET) --table=$(BENCHMARKS_TABLE) --official=$(BENCHMARKS_OFFICIAL)); \ - fi; \ - rm -rf $$T) - -benchmark-platforms: load-benchmarks $(RUNTIME_BIN) ## Runs benchmarks for runc and all given platforms in BENCHMARK_PLATFORMS. - @$(foreach PLATFORM,$(BENCHMARKS_PLATFORMS), \ - $(call run_benchmark,$(PLATFORM),--platform=$(PLATFORM) $(BENCH_RUNTIME_ARGS) --vfs2) && \ - $(call run_benchmark,$(PLATFORM)_vfs1,--platform=$(PLATFORM) $(BENCH_RUNTIME_ARGS)) && \ - ) true - @$(call run_benchmark,runc) -.PHONY: benchmark-platforms - -run-benchmark: load-benchmarks $(RUNTIME_BIN) ## Runs single benchmark and optionally sends data to BigQuery. - @if test "$(RUNTIME)" = "runc"; then $(call run_benchmark,$(RUNTIME)); fi; - @if test "$(RUNTIME)" != "runc"; then $(call run_benchmark,$(RUNTIME)$(BENCH_VFS),$(BENCH_RUNTIME_ARGS) $(BENCH_VFS)); fi; -.PHONY: run-benchmark - -## -## Website & documentation helpers. -## -## The website is built from repository documentation and wrappers, using -## using a locally-defined Docker image (see images/jekyll). The following -## variables may be set when using website-push: -## WEBSITE_IMAGE - The name of the container image. -## WEBSITE_SERVICE - The backend service. -## WEBSITE_PROJECT - The project id to use. -## WEBSITE_REGION - The region to deploy to. -## -WEBSITE_IMAGE := gcr.io/gvisordev/gvisordev -WEBSITE_SERVICE := gvisordev -WEBSITE_PROJECT := gvisordev -WEBSITE_REGION := us-central1 - -website-build: load-jekyll ## Build the site image locally. - @$(call run,//website:website,$(WEBSITE_IMAGE)) -.PHONY: website-build - -website-server: website-build ## Run a local server for development. - @docker run -i -p 8080:8080 $(WEBSITE_IMAGE) -.PHONY: website-server - -website-push: website-build ## Push a new image and update the service. - @docker push $(WEBSITE_IMAGE) -.PHONY: website-push - -website-deploy: website-push ## Deploy a new version of the website. - @gcloud run deploy $(WEBSITE_SERVICE) --platform=managed --region=$(WEBSITE_REGION) --project=$(WEBSITE_PROJECT) --image=$(WEBSITE_IMAGE) --memory 1Gi -.PHONY: website-deploy - -## -## Repository builders. -## -## This builds a local apt repository. The following variables may be set: -## RELEASE_ROOT - The repository root (default: "repo" directory). -## RELEASE_KEY - The repository GPG private key file (default: dummy key is created). -## RELEASE_ARTIFACTS - The release artifacts directory. May contain multiple. -## RELEASE_NIGHTLY - Set to true if a nightly release (default: false). -## RELEASE_COMMIT - The commit or Change-Id for the release (needed for tag). -## RELEASE_NAME - The name of the release in the proper format (needed for tag). -## RELEASE_NOTES - The file containing release notes (needed for tag). -## -RELEASE_ROOT := repo -RELEASE_KEY := repo.key -RELEASE_ARTIFACTS := artifacts -RELEASE_NIGHTLY := false -RELEASE_COMMIT := -RELEASE_NAME := -RELEASE_NOTES := -GPG_TEST_OPTIONS := $(shell if gpg --pinentry-mode loopback --version >/dev/null 2>&1; then echo --pinentry-mode loopback; fi) - -$(RELEASE_KEY): - @echo "WARNING: Generating a key for testing ($@); don't use this." - @T=$$(mktemp --tmpdir keyring.XXXXXX); \ - C=$$(mktemp --tmpdir config.XXXXXX); \ - echo Key-Type: DSA >> $$C && \ - echo Key-Length: 1024 >> $$C && \ - echo Name-Real: Test >> $$C && \ - echo Name-Email: test@example.com >> $$C && \ - echo Expire-Date: 0 >> $$C && \ - echo %commit >> $$C && \ - gpg --batch $(GPG_TEST_OPTIONS) --passphrase '' --no-default-keyring --secret-keyring $$T --no-tty --gen-key $$C && \ - gpg --batch $(GPG_TEST_OPTIONS) --export-secret-keys --no-default-keyring --secret-keyring $$T > $@; \ - rc=$$?; rm -f $$T $$C; exit $$rc - -$(RELEASE_ARTIFACTS)/%: - @mkdir -p $@ - @$(call copy,//runsc:runsc,$@) - @$(call copy,//shim:containerd-shim-runsc-v1,$@) - @$(call copy,//debian:debian,$@) - -release: $(RELEASE_KEY) $(RELEASE_ARTIFACTS)/$(ARCH) - @mkdir -p $(RELEASE_ROOT) - @NIGHTLY=$(RELEASE_NIGHTLY) tools/make_release.sh $(RELEASE_KEY) $(RELEASE_ROOT) $$(find $(RELEASE_ARTIFACTS) -type f) -.PHONY: release - -tag: ## Creates and pushes a release tag. - @tools/tag_release.sh "$(RELEASE_COMMIT)" "$(RELEASE_NAME)" "$(RELEASE_NOTES)" -.PHONY: tag |