diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 198 |
1 files changed, 162 insertions, 36 deletions
@@ -1,47 +1,173 @@ -UID := $(shell id -u ${USER}) -GID := $(shell id -g ${USER}) -GVISOR_BAZEL_CACHE := $(shell readlink -f ~/.cache/bazel/) +#!/usr/bin/make -f -all: runsc +# Copyright 2019 The gVisor Authors. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. -docker-build: - docker build -t gvisor-bazel . +# Described below. +OPTIONS := +TARGETS := //runsc +ARGS := -bazel-shutdown: - docker exec -i gvisor-bazel bazel shutdown && \ - docker kill gvisor-bazel +default: runsc +.PHONY: default -bazel-server-start: docker-build - mkdir -p "$(GVISOR_BAZEL_CACHE)" && \ - docker run -d --rm --name gvisor-bazel \ - --user 0:0 \ - -v "$(GVISOR_BAZEL_CACHE):$(HOME)/.cache/bazel/" \ - -v "$(CURDIR):$(CURDIR)" \ - --workdir "$(CURDIR)" \ - --tmpfs /tmp:rw,exec \ - --privileged \ - gvisor-bazel \ - sh -c "while :; do sleep 100; done" && \ - docker exec --user 0:0 -i gvisor-bazel sh -c "groupadd --gid $(GID) --non-unique gvisor && useradd --uid $(UID) --gid $(GID) -d $(HOME) gvisor" +## usage: make <target> +## or +## make <build|test|copy|run|sudo> OPTIONS="..." TARGETS="..." ARGS="..." +## +## Basic targets. +## +## This Makefile wraps basic build and test targets for ease-of-use. Bazel +## is run inside a canonical Docker container in order to simplify up-front +## requirements. +## +## There are common arguments that may be passed to targets. These are: +## OPTIONS - Build or test options. +## TARGETS - The bazel targets. +## ARGS - Arguments for run or sudo. +## +## Additionally, the copy target expects a DESTINATION to be provided. +## +## For example, to build runsc using this Makefile, you can run: +## make build OPTIONS="" TARGETS="//runsc"' +## +help: ## Shows all targets and help from the Makefile (this message). + @grep --no-filename -E '^([a-z.A-Z_-]+:.*?|)##' $(MAKEFILE_LIST) | \ + awk 'BEGIN {FS = "(:.*?|)## ?"}; { \ + if (length($$1) > 0) { \ + printf " \033[36m%-20s\033[0m %s\n", $$1, $$2; \ + } else { \ + printf "%s\n", $$2; \ + } \ + }' +build: ## Builds the given $(TARGETS) with the given $(OPTIONS). E.g. make build TARGETS=runsc +test: ## Tests the given $(TARGETS) with the given $(OPTIONS). E.g. make test TARGETS=pkg/buffer:buffer_test +copy: ## Copies the given $(TARGETS) to the given $(DESTINATION). E.g. make copy TARGETS=runsc DESTINATION=/tmp +run: ## Runs the given $(TARGETS), built with $(OPTIONS), using $(ARGS). E.g. make run TARGETS=runsc ARGS=-version +sudo: ## Runs the given $(TARGETS) as per run, but using "sudo -E". E.g. make sudo TARGETS=test/root:root_test ARGS=-test.v +.PHONY: help build test copy run sudo -bazel-server: - docker exec gvisor-bazel true || \ - $(MAKE) bazel-server-start +# Load all bazel wrappers. +# +# This file should define the basic "build", "test", "run" and "sudo" rules, in +# addition to the $(BRANCH_NAME) variable. +ifneq (,$(wildcard tools/google.mk)) +include tools/google.mk +else +include tools/bazel.mk +endif -BAZEL_OPTIONS := build runsc -bazel: bazel-server - docker exec -u $(UID):$(GID) -i gvisor-bazel bazel $(BAZEL_OPTIONS) +## +## Docker image targets. +## +## Images used by the tests must also be built and available locally. +## The canonical test targets defined below will automatically load +## relevant images. These can be loaded or built manually via these +## targets. +## +## (*) Note that you may provide an ARCH parameter in order to build +## and load images from an alternate archiecture (using qemu). When +## bazel is run as a server, this has the effect of running an full +## cross-architecture chain, and can produce cross-compiled binaries. +## +define images +$(1)-%: ## Image tool: $(1) a given image (also may use 'all-images'). + @$(MAKE) -C images $$@ +endef +rebuild-...: ## Rebuild the given image. Also may use 'rebuild-all-images'. +$(eval $(call images,rebuild)) +push-...: ## Push the given image. Also may use 'push-all-images'. +$(eval $(call images,pull)) +pull-...: ## Pull the given image. Also may use 'pull-all-images'. +$(eval $(call images,push)) +load-...: ## Load (pull or rebuild) the given image. Also may use 'load-all-images'. +$(eval $(call images,load)) +list-images: ## List all available images. + @$(MAKE) -C images $$@ -bazel-alias: - @echo "alias bazel='docker exec -u $(UID):$(GID) -i gvisor-bazel bazel'" +## +## Canonical build and test targets. +## +## These targets are used by continuous integration and provide +## convenient entrypoints for testing changes. If you're adding a +## new subsystem or workflow, consider adding a new target here. +## +runsc: ## Builds the runsc binary. + @$(MAKE) build TARGETS="//runsc" +.PHONY: runsc -runsc: - $(MAKE) BAZEL_OPTIONS="build runsc" bazel +smoke-test: ## Runs a simple smoke test after build runsc. + @$(MAKE) run DOCKER_RUN_OPTIONS="" ARGS="--alsologtostderr --network none --debug --TESTONLY-unsafe-nonroot=true --rootless do true" +.PHONY: smoke-tests -tests: - $(MAKE) BAZEL_OPTIONS="test --test_tag_filters runsc_ptrace //test/syscalls/..." bazel +unit-tests: ## Runs all unit tests in pkg runsc and tools. + @$(MAKE) test OPTIONS="pkg/... runsc/... tools/..." +.PHONY: unit-tests -unit-tests: - $(MAKE) BAZEL_OPTIONS="test //pkg/... //runsc/... //tools/..." bazel +tests: ## Runs all local ptrace system call tests. + @$(MAKE) test OPTIONS="--test_tag_filter runsc_ptrace test/syscalls/..." +.PHONY: tests -.PHONY: docker-build bazel-shutdown bazel-server-start bazel-server bazel runsc tests +## +## Development helpers and tooling. +## +## These targets faciliate local development by automatically +## installing and configuring a runtime. Several variables may +## be used here to tweak the installation: +## RUNTIME - The name of the installed runtime (default: branch). +## RUNTIME_DIR - Where the runtime will be installed (default: temporary directory with the $RUNTIME). +## RUNTIME_BIN - The runtime binary (default: $RUNTIME_DIR/runsc). +## RUNTIME_LOG_DIR - The logs directory (default: $RUNTIME_DIR/logs). +## RUNTIME_LOGS - The log pattern (default: $RUNTIME_LOG_DIR/runsc.log.%TEST%.%TIMESTAMP%.%COMMAND%). +## +ifeq (,$(BRANCH_NAME)) +RUNTIME := runsc +RUNTIME_DIR := $(shell dirname $(shell mktemp -u))/runsc +else +RUNTIME := $(BRANCH_NAME) +RUNTIME_DIR := $(shell dirname $(shell mktemp -u))/$(BRANCH_NAME) +endif +RUNTIME_BIN := $(RUNTIME_DIR)/runsc +RUNTIME_LOG_DIR := $(RUNTIME_DIR)/logs +RUNTIME_LOGS := $(RUNTIME_LOG_DIR)/runsc.log.%TEST%.%TIMESTAMP%.%COMMAND% + +dev: ## Installs a set of local runtimes. Requires sudo. + @$(MAKE) refresh ARGS="--net-raw" + @$(MAKE) configure RUNTIME="$(RUNTIME)" ARGS="--net-raw" + @$(MAKE) configure RUNTIME="$(RUNTIME)-d" ARGS="--net-raw --debug --strace --log-packets" + @$(MAKE) configure RUNTIME="$(RUNTIME)-p" ARGS="--net-raw --profile" + @sudo systemctl restart docker +.PHONY: dev + +refresh: ## Refreshes the runtime binary (for development only). Must have called 'dev' or 'test-install' first. + @mkdir -p "$(RUNTIME_DIR)" + @$(MAKE) copy TARGETS=runsc DESTINATION="$(RUNTIME_BIN)" && chmod 0755 "$(RUNTIME_BIN)" +.PHONY: install + +test-install: ## Installs the runtime for testing. Requires sudo. + @$(MAKE) refresh ARGS="--net-raw --TESTONLY-test-name-env=RUNSC_TEST_NAME --debug --strace --log-packets $(ARGS)" + @$(MAKE) configure + @sudo systemctl restart docker +.PHONY: install-test + +configure: ## Configures a single runtime. Requires sudo. Typically called from dev or test-install. + @sudo sudo "$(RUNTIME_BIN)" install --experimental=true --runtime="$(RUNTIME)" -- --debug-log "$(RUNTIME_LOGS)" $(ARGS) + @echo "Installed runtime \"$(RUNTIME)\" @ $(RUNTIME_BIN)" + @echo "Logs are in: $(RUNTIME_LOG_DIR)" + @sudo rm -rf "$(RUNTIME_LOG_DIR)" && mkdir -p "$(RUNTIME_LOG_DIR)" +.PHONY: configure + +test-runtime: ## A convenient wrapper around test that provides the runtime argument. Target must still be provided. + @$(MAKE) test OPTIONS="$(OPTIONS) --test_arg=--runtime=$(RUNTIME)" +.PHONY: runtime-test |