Check in gVisor.

PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463

2 files changed, 228 insertions, 0 deletions

diff --git a/pkg/tcpip/sample/tun_tcp_connect/BUILD b/pkg/tcpip/sample/tun_tcp_connect/BUILD
new file mode 100644
index 000000000..870ee0433
--- /dev/null
+++ b/pkg/tcpip/sample/tun_tcp_connect/BUILD
@@ -0,0 +1,20 @@
+package(licenses = ["notice"])  # BSD
+
+load("@io_bazel_rules_go//go:def.bzl", "go_binary")
+
+go_binary(
+    name = "tun_tcp_connect",
+    srcs = ["main.go"],
+    deps = [
+        "//pkg/tcpip",
+        "//pkg/tcpip/buffer",
+        "//pkg/tcpip/link/fdbased",
+        "//pkg/tcpip/link/rawfile",
+        "//pkg/tcpip/link/sniffer",
+        "//pkg/tcpip/link/tun",
+        "//pkg/tcpip/network/ipv4",
+        "//pkg/tcpip/stack",
+        "//pkg/tcpip/transport/tcp",
+        "//pkg/waiter",
+    ],
+)
diff --git a/pkg/tcpip/sample/tun_tcp_connect/main.go b/pkg/tcpip/sample/tun_tcp_connect/main.go
new file mode 100644
index 000000000..332929c85
--- /dev/null
+++ b/pkg/tcpip/sample/tun_tcp_connect/main.go
@@ -0,0 +1,208 @@
+// Copyright 2016 The Netstack Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// This sample creates a stack with TCP and IPv4 protocols on top of a TUN
+// device, and connects to a peer. Similar to "nc <address> <port>". While the
+// sample is running, attempts to connect to its IPv4 address will result in
+// a RST segment.
+//
+// As an example of how to run it, a TUN device can be created and enabled on
+// a linux host as follows (this only needs to be done once per boot):
+//
+// [sudo] ip tuntap add user <username> mode tun <device-name>
+// [sudo] ip link set <device-name> up
+// [sudo] ip addr add <ipv4-address>/<mask-length> dev <device-name>
+//
+// A concrete example:
+//
+// $ sudo ip tuntap add user wedsonaf mode tun tun0
+// $ sudo ip link set tun0 up
+// $ sudo ip addr add 192.168.1.1/24 dev tun0
+//
+// Then one can run tun_tcp_connect as such:
+//
+// $ ./tun/tun_tcp_connect tun0 192.168.1.2 0 192.168.1.1 1234
+//
+// This will attempt to connect to the linux host's stack. One can run nc in
+// listen mode to accept a connect from tun_tcp_connect and exchange data.
+package main
+
+import (
+	"bufio"
+	"fmt"
+	"log"
+	"math/rand"
+	"net"
+	"os"
+	"strconv"
+	"time"
+
+	"gvisor.googlesource.com/gvisor/pkg/tcpip"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/buffer"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/link/fdbased"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/link/rawfile"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/link/sniffer"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/link/tun"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/network/ipv4"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/stack"
+	"gvisor.googlesource.com/gvisor/pkg/tcpip/transport/tcp"
+	"gvisor.googlesource.com/gvisor/pkg/waiter"
+)
+
+// writer reads from standard input and writes to the endpoint until standard
+// input is closed. It signals that it's done by closing the provided channel.
+func writer(ch chan struct{}, ep tcpip.Endpoint) {
+	defer func() {
+		ep.Shutdown(tcpip.ShutdownWrite)
+		close(ch)
+	}()
+
+	r := bufio.NewReader(os.Stdin)
+	for {
+		v := buffer.NewView(1024)
+		n, err := r.Read(v)
+		if err != nil {
+			return
+		}
+
+		v.CapLength(n)
+		for len(v) > 0 {
+			n, err := ep.Write(tcpip.SlicePayload(v), tcpip.WriteOptions{})
+			if err != nil {
+				fmt.Println("Write failed:", err)
+				return
+			}
+
+			v.TrimFront(int(n))
+		}
+	}
+}
+
+func main() {
+	if len(os.Args) != 6 {
+		log.Fatal("Usage: ", os.Args[0], " <tun-device> <local-ipv4-address> <local-port> <remote-ipv4-address> <remote-port>")
+	}
+
+	tunName := os.Args[1]
+	addrName := os.Args[2]
+	portName := os.Args[3]
+	remoteAddrName := os.Args[4]
+	remotePortName := os.Args[5]
+
+	rand.Seed(time.Now().UnixNano())
+
+	addr := tcpip.Address(net.ParseIP(addrName).To4())
+	remote := tcpip.FullAddress{
+		NIC:  1,
+		Addr: tcpip.Address(net.ParseIP(remoteAddrName).To4()),
+	}
+
+	var localPort uint16
+	if v, err := strconv.Atoi(portName); err != nil {
+		log.Fatalf("Unable to convert port %v: %v", portName, err)
+	} else {
+		localPort = uint16(v)
+	}
+
+	if v, err := strconv.Atoi(remotePortName); err != nil {
+		log.Fatalf("Unable to convert port %v: %v", remotePortName, err)
+	} else {
+		remote.Port = uint16(v)
+	}
+
+	// Create the stack with ipv4 and tcp protocols, then add a tun-based
+	// NIC and ipv4 address.
+	s := stack.New([]string{ipv4.ProtocolName}, []string{tcp.ProtocolName})
+
+	mtu, err := rawfile.GetMTU(tunName)
+	if err != nil {
+		log.Fatal(err)
+	}
+
+	fd, err := tun.Open(tunName)
+	if err != nil {
+		log.Fatal(err)
+	}
+
+	linkID := fdbased.New(&fdbased.Options{FD: fd, MTU: mtu})
+	if err := s.CreateNIC(1, sniffer.New(linkID)); err != nil {
+		log.Fatal(err)
+	}
+
+	if err := s.AddAddress(1, ipv4.ProtocolNumber, addr); err != nil {
+		log.Fatal(err)
+	}
+
+	// Add default route.
+	s.SetRouteTable([]tcpip.Route{
+		{
+			Destination: "\x00\x00\x00\x00",
+			Mask:        "\x00\x00\x00\x00",
+			Gateway:     "",
+			NIC:         1,
+		},
+	})
+
+	// Create TCP endpoint.
+	var wq waiter.Queue
+	ep, e := s.NewEndpoint(tcp.ProtocolNumber, ipv4.ProtocolNumber, &wq)
+	if err != nil {
+		log.Fatal(e)
+	}
+
+	// Bind if a port is specified.
+	if localPort != 0 {
+		if err := ep.Bind(tcpip.FullAddress{0, "", localPort}, nil); err != nil {
+			log.Fatal("Bind failed: ", err)
+		}
+	}
+
+	// Issue connect request and wait for it to complete.
+	waitEntry, notifyCh := waiter.NewChannelEntry(nil)
+	wq.EventRegister(&waitEntry, waiter.EventOut)
+	terr := ep.Connect(remote)
+	if terr == tcpip.ErrConnectStarted {
+		fmt.Println("Connect is pending...")
+		<-notifyCh
+		terr = ep.GetSockOpt(tcpip.ErrorOption{})
+	}
+	wq.EventUnregister(&waitEntry)
+
+	if terr != nil {
+		log.Fatal("Unable to connect: ", terr)
+	}
+
+	fmt.Println("Connected")
+
+	// Start the writer in its own goroutine.
+	writerCompletedCh := make(chan struct{})
+	go writer(writerCompletedCh, ep) // S/R-FIXME
+
+	// Read data and write to standard output until the peer closes the
+	// connection from its side.
+	wq.EventRegister(&waitEntry, waiter.EventIn)
+	for {
+		v, err := ep.Read(nil)
+		if err != nil {
+			if err == tcpip.ErrClosedForReceive {
+				break
+			}
+
+			if err == tcpip.ErrWouldBlock {
+				<-notifyCh
+				continue
+			}
+
+			log.Fatal("Read() failed:", err)
+		}
+
+		os.Stdout.Write(v)
+	}
+	wq.EventUnregister(&waitEntry)
+
+	// The reader has completed. Now wait for the writer as well.
+	<-writerCompletedCh
+
+	ep.Close()
+}