ext: boilerplate code.

Renamed ext4 to ext since we are targeting ext(2/3/4).
Removed fs.go since we are targeting VFS2.
Added ext.go with filesystem struct.

PiperOrigin-RevId: 257689775

1 files changed, 267 insertions, 0 deletions

diff --git a/pkg/sentry/fs/ext/disklayout/inode.go b/pkg/sentry/fs/ext/disklayout/inode.go
new file mode 100644
index 000000000..b48001910
--- /dev/null
+++ b/pkg/sentry/fs/ext/disklayout/inode.go
@@ -0,0 +1,267 @@
+// Copyright 2019 The gVisor Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+package disklayout
+
+import (
+	"gvisor.dev/gvisor/pkg/abi/linux"
+	"gvisor.dev/gvisor/pkg/sentry/kernel/auth"
+	"gvisor.dev/gvisor/pkg/sentry/kernel/time"
+)
+
+// The Inode interface must be implemented by structs representing ext inodes.
+// The inode stores all the metadata pertaining to the file (except for the
+// file name which is held by the directory entry). It does NOT expose all
+// fields and should be extended if need be.
+//
+// Some file systems (e.g. FAT) use the directory entry to store all this
+// information. Ext file systems do not so that they can support hard links.
+// However, ext4 cheats a little bit and duplicates the file type in the
+// directory entry for performance gains.
+//
+// See https://www.kernel.org/doc/html/latest/filesystems/ext4/dynamic.html#index-nodes.
+type Inode interface {
+	// Mode returns the linux file mode which is majorly used to extract
+	// information like:
+	// - File permissions (read/write/execute by user/group/others).
+	// - Sticky, set UID and GID bits.
+	// - File type.
+	//
+	// Masks to extract this information are provided in pkg/abi/linux/file.go.
+	Mode() linux.FileMode
+
+	// UID returns the owner UID.
+	UID() auth.KUID
+
+	// GID returns the owner GID.
+	GID() auth.KGID
+
+	// Size returns the size of the file in bytes.
+	Size() uint64
+
+	// InodeSize returns the size of this inode struct in bytes.
+	// In ext2 and ext3, the inode struct and inode disk record size was fixed at
+	// 128 bytes. Ext4 makes it possible for the inode struct to be bigger.
+	// However, accessing any field beyond the 128 bytes marker must be verified
+	// using this method.
+	InodeSize() uint16
+
+	// AccessTime returns the last access time. Shows when the file was last read.
+	//
+	// If InExtendedAttr is set, then this should NOT be used because the
+	// underlying field is used to store the extended attribute value checksum.
+	AccessTime() time.Time
+
+	// ChangeTime returns the last change time. Shows when the file meta data
+	// (like permissions) was last changed.
+	//
+	// If InExtendedAttr is set, then this should NOT be used because the
+	// underlying field is used to store the lower 32 bits of the attribute
+	// value’s reference count.
+	ChangeTime() time.Time
+
+	// ModificationTime returns the last modification time. Shows when the file
+	// content was last modified.
+	//
+	// If InExtendedAttr is set, then this should NOT be used because
+	// the underlying field contains the number of the inode that owns the
+	// extended attribute.
+	ModificationTime() time.Time
+
+	// DeletionTime returns the deletion time. Inodes are marked as deleted by
+	// writing to the underlying field. FS tools can restore files until they are
+	// actually overwritten.
+	DeletionTime() time.Time
+
+	// LinksCount returns the number of hard links to this inode.
+	//
+	// Normally there is an upper limit on the number of hard links:
+	//   - ext2/ext3 = 32,000
+	//   - ext4      = 65,000
+	//
+	// This implies that an ext4 directory cannot have more than 64,998
+	// subdirectories because each subdirectory will have a hard link to the
+	// directory via the `..` entry. The directory has hard link via the `.` entry
+	// of its own. And finally the inode is initiated with 1 hard link (itself).
+	//
+	// The underlying value is reset to 1 if all the following hold:
+	//     - Inode is a directory.
+	//     - SbDirNlink is enabled.
+	//     - Number of hard links is incremented past 64,999.
+	// Hard link value of 1 for a directory would indicate that the number of hard
+	// links is unknown because a directory can have minimum 2 hard links (itself
+	// and `.` entry).
+	LinksCount() uint16
+
+	// Flags returns InodeFlags which represents the inode flags.
+	Flags() InodeFlags
+
+	// Blocks returns the underlying inode.i_block array. This field is special
+	// and is used to store various kinds of things depending on the filesystem
+	// version and inode type.
+	//   - In ext2/ext3, it contains the block map.
+	//   - In ext4, it contains the extent tree.
+	//   - For inline files, it contains the file contents.
+	//   - For symlinks, it contains the link path (if it fits here).
+	//
+	// See https://www.kernel.org/doc/html/latest/filesystems/ext4/dynamic.html#the-contents-of-inode-i-block.
+	Blocks() [60]byte
+}
+
+// Inode flags. This is not comprehensive and flags which were not used in
+// the Linux kernel have been excluded.
+const (
+	// InSync indicates that all writes to the file must be synchronous.
+	InSync = 0x8
+
+	// InImmutable indicates that this file is immutable.
+	InImmutable = 0x10
+
+	// InAppend indicates that this file can only be appended to.
+	InAppend = 0x20
+
+	// InNoDump indicates that teh dump(1) utility should not dump this file.
+	InNoDump = 0x40
+
+	// InNoAccessTime indicates that the access time of this inode must not be
+	// updated.
+	InNoAccessTime = 0x80
+
+	// InIndex indicates that this directory has hashed indexes.
+	InIndex = 0x1000
+
+	// InJournalData indicates that file data must always be written through a
+	// journal device.
+	InJournalData = 0x4000
+
+	// InDirSync indicates that all the directory entiry data must be written
+	// synchronously.
+	InDirSync = 0x10000
+
+	// InTopDir indicates that this inode is at the top of the directory hierarchy.
+	InTopDir = 0x20000
+
+	// InHugeFile indicates that this is a huge file.
+	InHugeFile = 0x40000
+
+	// InExtents indicates that this inode uses extents.
+	InExtents = 0x80000
+
+	// InExtendedAttr indicates that this inode stores a large extended attribute
+	// value in its data blocks.
+	InExtendedAttr = 0x200000
+
+	// InInline indicates that this inode has inline data.
+	InInline = 0x10000000
+
+	// InReserved indicates that this inode is reserved for the ext4 library.
+	InReserved = 0x80000000
+)
+
+// InodeFlags represents all possible combinations of inode flags. It aims to
+// cover the bit masks and provide a more user-friendly interface.
+type InodeFlags struct {
+	Sync         bool
+	Immutable    bool
+	Append       bool
+	NoDump       bool
+	NoAccessTime bool
+	Index        bool
+	JournalData  bool
+	DirSync      bool
+	TopDir       bool
+	HugeFile     bool
+	Extents      bool
+	ExtendedAttr bool
+	Inline       bool
+	Reserved     bool
+}
+
+// ToInt converts inode flags back to its 32-bit rep.
+func (f InodeFlags) ToInt() uint32 {
+	var res uint32
+
+	if f.Sync {
+		res |= InSync
+	}
+	if f.Immutable {
+		res |= InImmutable
+	}
+	if f.Append {
+		res |= InAppend
+	}
+	if f.NoDump {
+		res |= InNoDump
+	}
+	if f.NoAccessTime {
+		res |= InNoAccessTime
+	}
+	if f.Index {
+		res |= InIndex
+	}
+	if f.JournalData {
+		res |= InJournalData
+	}
+	if f.DirSync {
+		res |= InDirSync
+	}
+	if f.TopDir {
+		res |= InTopDir
+	}
+	if f.HugeFile {
+		res |= InHugeFile
+	}
+	if f.Extents {
+		res |= InExtents
+	}
+	if f.ExtendedAttr {
+		res |= InExtendedAttr
+	}
+	if f.Inline {
+		res |= InInline
+	}
+	if f.Reserved {
+		res |= InReserved
+	}
+
+	return res
+}
+
+// InodeFlagsFromInt converts the integer representation of inode flags to
+// a InodeFlags struct.
+func InodeFlagsFromInt(f uint32) InodeFlags {
+	return InodeFlags{
+		Sync:         f&InSync > 0,
+		Immutable:    f&InImmutable > 0,
+		Append:       f&InAppend > 0,
+		NoDump:       f&InNoDump > 0,
+		NoAccessTime: f&InNoAccessTime > 0,
+		Index:        f&InIndex > 0,
+		JournalData:  f&InJournalData > 0,
+		DirSync:      f&InDirSync > 0,
+		TopDir:       f&InTopDir > 0,
+		HugeFile:     f&InHugeFile > 0,
+		Extents:      f&InExtents > 0,
+		ExtendedAttr: f&InExtendedAttr > 0,
+		Inline:       f&InInline > 0,
+		Reserved:     f&InReserved > 0,
+	}
+}
+
+// These masks define how users can view/modify inode flags. The rest of the
+// flags are for internal kernel usage only.
+const (
+	InUserReadFlagMask  = 0x4BDFFF
+	InUserWriteFlagMask = 0x4B80FF
+)