Clean up markdown lists

7 files changed, 37 insertions, 37 deletions

diff --git a/content/docs/user_guide/FAQ.md b/content/docs/user_guide/FAQ.md
index da742a41b..74acaa125 100644
--- a/content/docs/user_guide/FAQ.md
+++ b/content/docs/user_guide/FAQ.md
@@ -89,12 +89,12 @@ order to communicate to the DNS server. runsc network is isolated from the
 host and cannot access the DNS server on the host network without breaking the
 sandbox isolation. There are a few different workarounds you can try:
 
-*   Use default bridge network with `--link` to connect containers. Default
-    bridge doesn't use embedded DNS.
-*   Use [`--network=host`][host-net] option in runsc, however beware that it will
-    use the host network stack and is less secure.
-*   Use IPs instead of container names.
-*   Use [Kubernetes][k8s]. Container name lookup works fine in Kubernetes.
+* Use default bridge network with `--link` to connect containers. Default
+  bridge doesn't use embedded DNS.
+* Use [`--network=host`][host-net] option in runsc, however beware that it will
+  use the host network stack and is less secure.
+* Use IPs instead of container names.
+* Use [Kubernetes][k8s]. Container name lookup works fine in Kubernetes.
 
 [security-model]: /docs/architecture_guide/security/
 [old-linux]: /docs/user_guide/networking/#gso
diff --git a/content/docs/user_guide/checkpoint_restore.md b/content/docs/user_guide/checkpoint_restore.md
index f13c5199e..fef4c1dfa 100644
--- a/content/docs/user_guide/checkpoint_restore.md
+++ b/content/docs/user_guide/checkpoint_restore.md
@@ -83,19 +83,19 @@ docker start --checkpoint --checkpoint-dir=<directory> <container>
 
 ### Issues Preventing Compatibility with Docker
 
-*   **[Moby #37360][leave-running]:** Docker version 18.03.0-ce and earlier hangs
-    when checkpointing and does not create the checkpoint. To successfully use
-    this feature, install a custom version of docker-ce from the moby repository.
-    This issue is caused by an improper implementation of the `--leave-running`
-    flag. This issue is fixed in newer releases.
-*   **Docker does not support restoration into new containers:** Docker currently
-    expects the container which created the checkpoint to be the same container
-    used to restore which is not possible in runsc. When Docker supports container
-    migration and therefore restoration into new containers, this will be the
-    flow.
-*   **[Moby #37344][checkpoint-dir]:** Docker does not currently support the
-    `--checkpoint-dir` flag but this will be required when restoring from a
-    checkpoint made in another container.
+- **[Moby #37360][leave-running]:** Docker version 18.03.0-ce and earlier hangs
+  when checkpointing and does not create the checkpoint. To successfully use
+  this feature, install a custom version of docker-ce from the moby repository.
+  This issue is caused by an improper implementation of the `--leave-running`
+  flag. This issue is fixed in newer releases.
+- **Docker does not support restoration into new containers:** Docker currently
+  expects the container which created the checkpoint to be the same container
+  used to restore which is not possible in runsc. When Docker supports container
+  migration and therefore restoration into new containers, this will be the
+  flow.
+- **[Moby #37344][checkpoint-dir]:** Docker does not currently support the
+  `--checkpoint-dir` flag but this will be required when restoring from a
+  checkpoint made in another container.
 
 [leave-running]: https://github.com/moby/moby/pull/37360
 [checkpoint-dir]: https://github.com/moby/moby/issues/37344
diff --git a/content/docs/user_guide/compatibility/_index.md b/content/docs/user_guide/compatibility/_index.md
index ff0e6acce..94fcb6f22 100644
--- a/content/docs/user_guide/compatibility/_index.md
+++ b/content/docs/user_guide/compatibility/_index.md
@@ -40,10 +40,10 @@ The following applications/images have been tested:
 
 Most common utilities work. Note that:
 
-*   Some tools, such as `tcpdump` and old versions of `ping`, require explicitly
-    enabling raw sockets via the unsafe `--net-raw` runsc flag.
-*   Different Docker images can behave differently. For example, Alpine Linux and
-    Ubuntu have different `ip` binaries.
+* Some tools, such as `tcpdump` and old versions of `ping`, require explicitly
+  enabling raw sockets via the unsafe `--net-raw` runsc flag.
+* Different Docker images can behave differently. For example, Alpine Linux and
+  Ubuntu have different `ip` binaries.
 
  Specific tools include:
 
diff --git a/content/docs/user_guide/debugging.md b/content/docs/user_guide/debugging.md
index c19269934..49f9638d7 100644
--- a/content/docs/user_guide/debugging.md
+++ b/content/docs/user_guide/debugging.md
@@ -106,9 +106,9 @@ Then restart docker to refresh the runtime options. While the container is runni
 execute `runsc debug` to collect profile information and save to a file. Here are
 the options available:
 
-*   **--profile-heap:** Generates heap profile to the speficied file.
-*   **--profile-cpu:** Enables CPU profiler, waits for `--profile-delay` seconds 
-    and generates CPU profile to the speficied file.
+* **--profile-heap:** Generates heap profile to the speficied file.
+* **--profile-cpu:** Enables CPU profiler, waits for `--profile-delay` seconds 
+  and generates CPU profile to the speficied file.
 
 For example:
 
@@ -120,7 +120,7 @@ sudo runsc --root /var/run/docker/runtime-runsc-prof/moby debug --profile-heap=/
 sudo runsc --root /var/run/docker/runtime-runsc-prof/moby debug --profile-cpu=/tmp/cpu.prof --profile-delay=30 63254c6ab3a6989623fa1fb53616951eed31ac605a2637bb9ddba5d8d404b35b
 ```
 
-The resulting files can be opened using `go tool pprof` or [pprof][pprof]. The examples 
+The resulting files can be opened using `go tool pprof` or [pprof][]. The examples 
 below create image file (`.svg`) with the heap profile and writes the top 
 functions using CPU to the console:
 
diff --git a/content/docs/user_guide/install.md b/content/docs/user_guide/install.md
index d1bf79dd5..f25bc0d73 100644
--- a/content/docs/user_guide/install.md
+++ b/content/docs/user_guide/install.md
@@ -102,9 +102,9 @@ Based on the release type, you will need to substitute `${DIST}` below, using
 one of:
 
 * `master`: For HEAD.
-* `nightly: For nightly releases.
-* `release: For the latest release.
-* `${yyyymmdd}: For a specific releases (see above).
+* `nightly`: For nightly releases.
+* `release`: For the latest release.
+* `${yyyymmdd}`: For a specific releases (see above).
 
 The repository for the release you wish to install should be added:
 
diff --git a/content/docs/user_guide/platforms.md b/content/docs/user_guide/platforms.md
index 72e640cc8..b0b76c0ee 100644
--- a/content/docs/user_guide/platforms.md
+++ b/content/docs/user_guide/platforms.md
@@ -58,10 +58,10 @@ If you are using a virtual machine you will need to make sure that nested
 virtualization is configured. Here are links to documents on how to set up
 nested virtualization in several popular environments:
 
-*   Google Cloud: [Enabling Nested Virtualization for VM Instances][nested-gcp]
-*   Microsoft Azure: [How to enable nested virtualization in an Azure VM][nested-azure]
-*   VirtualBox: [Nested Virtualization][nested-virtualbox]
-*   KVM: [Nested Guests][nested-kvm]
+* Google Cloud: [Enabling Nested Virtualization for VM Instances][nested-gcp]
+* Microsoft Azure: [How to enable nested virtualization in an Azure VM][nested-azure]
+* VirtualBox: [Nested Virtualization][nested-virtualbox]
+* KVM: [Nested Guests][nested-kvm]
 
 ### Configuring Docker
 
diff --git a/content/docs/user_guide/quick_start/_index.md b/content/docs/user_guide/quick_start/_index.md
index bb35e748f..3d1524bc8 100644
--- a/content/docs/user_guide/quick_start/_index.md
+++ b/content/docs/user_guide/quick_start/_index.md
@@ -7,6 +7,6 @@ gVisor can be used with Docker, Kubernetes, or directly using `runsc` with
 crafted OCI spec for your container. Use the links below to see detailed
 instructions for each of them:
 
-*   [Docker](./docker/): The quickest and easiest way to get started.
-*   [Kubernetes](./kubernetes/): Isolate Pods in your K8s cluster with gVisor.
-*   [OCI](./oci/): Expert mode. Customize gVisor for your environment.
+* [Docker](./docker/): The quickest and easiest way to get started.
+* [Kubernetes](./kubernetes/): Isolate Pods in your K8s cluster with gVisor.
+* [OCI](./oci/): Expert mode. Customize gVisor for your environment.