# Copyright (C) 2014,2015 Nippon Telegraph and Telephone Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or # implied. # See the License for the specific language governing permissions and # limitations under the License. import time import sys import nose import quagga_access as qaccess import docker_control as fab import StringIO from noseplugin import OptionParser from noseplugin import parser_option from gobgp_test import GoBGPTestBase from constant import * from fabric.api import local def print_elapsed_time(f): def wrapped(*args, **kwargs): start = time.time() f(*args, **kwargs) elapsed_time = time.time() - start print "%s: elapsed_time:%d sec" % (f.__name__, elapsed_time) return wrapped class GoBGPTest(GoBGPTestBase): quagga_num = 3 retry_count_common = 2 initial_wait_time = 5 def __init__(self, *args, **kwargs): super(GoBGPTest, self).__init__(*args, **kwargs) @print_elapsed_time def setUp(self): self.quagga_configs = [] self.use_ipv6_gobgp = False self.use_exa_bgp = False self.retry_count_common = 2 self.initial_wait_time = 1 self.wait_per_retry = 3 if fab.docker_container_check() or fab.bridge_setting_check(): print "gobgp test environment already exists. clean up..." fab.docker_containers_destroy(False, False) @classmethod @print_elapsed_time def setUpClass(cls): print 'prepare gobgp' cls.go_path = parser_option.go_path cls.image = parser_option.gobgp_image cls.log_debug = True if parser_option.gobgp_log_level == 'debug' else False fab.prepare_gobgp(cls.log_debug, cls.image) fab.build_config_tools(cls.go_path) @print_elapsed_time def initialize(self): fab.init_policy_test_env_executor(self.quagga_num, use_ipv6=self.use_ipv6_gobgp, use_exabgp=self.use_exa_bgp) print "please wait " + str(self.initial_wait_time) + " second" time.sleep(self.initial_wait_time) self.assertTrue(self.check_load_config()) @print_elapsed_time def setup_config(self, peer, policy_name, target, add_exabgp=False, defaultReject=False): ipver = IPv4 if not self.use_ipv6_gobgp else IPv6 fab.make_config(self.quagga_num, self.go_path, BRIDGE_0, use_compiled=True, ipver=ipver) if add_exabgp: self.setup_exabgp() fab.update_policy_config(self.go_path, peer, policy_name, target, defaultReject=defaultReject) @print_elapsed_time def setup_exabgp(self): self.use_exa_bgp = True ipver = IPv4 if not self.use_ipv6_gobgp else IPv6 fab.make_config_append(100, self.go_path, BRIDGE_0, peer_opts="--none-peer", use_compiled=True, ipver=ipver) """ import-policy test --------------------------------------- peer2 ->(192.168.2.0/24)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer3-rib | --------------------------------------- """ def test_01_import_policy_initial(self): peer1 = "10.0.0.1" peer2 = "10.0.0.2" peer3 = "10.0.0.3" prefix1 = "192.168.2.0/24" w = self.wait_per_retry # policy:test_02_export_policy_initial which rejects paths # that are 192.168.0.0/16 (16...24) and coming from peer2(10.0.0.2) # is attached to peer3(10.0.0.3)'s import-policy. self.setup_config(peer3, "test_01_import_policy_initial", "import") self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-in in peer2 path = self.get_adj_rib_in(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) path = self.get_paths_in_localrib(peer3, prefix1,retry=0) self.assertIsNone(path) # check show ip bgp on peer1(quagga3) qpath = self.get_route(peer3, prefix1, retry=self.retry_count_common, interval=w) self.assertIsNone(qpath) """ export-policy test --------------------------------------- peer2 ->(192.168.2.0/24)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer3-rib ->x peer3-adj-rib-out | --------------------------------------- """ def test_02_export_policy_initial(self): peer1 = "10.0.0.1" peer2 = "10.0.0.2" peer3 = "10.0.0.3" prefix1 = "192.168.2.0/24" w = self.wait_per_retry # policy:test_02_export_policy_initial which rejects paths # that are 192.168.0.0/16 (16...24) and coming from peer2(10.0.0.2) # is attached to peer3(10.0.0.3)'s export-policy. self.setup_config(peer3, "test_02_export_policy_initial", "export") self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") paths = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(paths) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_adj_rib_in(peer2, prefix1, retry=1) self.assertIsNotNone(path) path = self.get_paths_in_localrib(peer3, prefix1) self.assertIsNotNone(path) path = self.get_adj_rib_out(peer3, prefix1, retry=1) # print path self.assertIsNone(path) # check show ip bgp on peer1(quagga3) qpath = self.get_route(peer3, prefix1, retry=self.retry_count_common, interval=w) self.assertIsNone(qpath) """ import-policy test r1:192.168.2.0 r2:192.168.20.0 r3:192.168.200.0 ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> peer3 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> peer3 ------------------------------------------------- """ def test_03_import_policy_update(self): peer1 = "10.0.0.1" peer2 = "10.0.0.2" peer3 = "10.0.0.3" r1 = "192.168.2.0/24" r2 = "192.168.20.0/24" r3 = "192.168.200.0/24" w = self.wait_per_retry # policy:test_03_import_policy_update which rejects paths # that are 192.168.2.0/24, 192.168.20.0/24, 192.168.200.0/24 # and coming from peer2(10.0.0.2) # is attached to peer3(10.0.0.3)'s import-policy. self.setup_config(peer3, "test_03_import_policy_update", "import") self.initialize() # add other network tn = qaccess.login(peer2) print "add network 192.168.20.0/24" qaccess.add_network(tn, 65002, r2) print "add network 192.168.200.0/24" qaccess.add_network(tn, 65002, r3) qaccess.logout(tn) addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") time.sleep(self.initial_wait_time) def path_exists_in_localrib(peer, prefix,r=10): paths = self.get_paths_in_localrib(peer, prefix, retry=r, interval=w) return paths is not None def path_exists_in_routing_table(peer, prefix,r=10): qpath = self.get_route(peer, prefix, retry=r, interval=w) return qpath is not None def path_exists_in_adj_rib_in(peer, prefix,r=10): path = self.get_adj_rib_in(peer, prefix, retry=r, interval=w) return path is not None self.assertTrue(path_exists_in_localrib(peer1,r1)) self.assertTrue(path_exists_in_localrib(peer1,r2)) self.assertTrue(path_exists_in_localrib(peer1,r3)) self.assertTrue(path_exists_in_localrib(peer3,r1)) self.assertFalse(path_exists_in_localrib(peer3,r2, r=1)) self.assertFalse(path_exists_in_localrib(peer3,r3, r=0)) # check show ip bgp on peer1(quagga1) self.assertTrue(path_exists_in_routing_table(peer1, r1)) self.assertTrue(path_exists_in_routing_table(peer1, r2)) self.assertTrue(path_exists_in_routing_table(peer1, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertFalse(path_exists_in_routing_table(peer3, r3, r=0)) # check adj-rib-out in peer2 self.assertTrue(path_exists_in_adj_rib_in(peer2, r1)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r2)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r3)) # update policy print "update_policy_config" self.set_policy(peer3, "import", "test_03_import_policy_update_softreset") time.sleep(self.initial_wait_time) # soft reset print "soft_reset" self.soft_reset(peer2, IPv4) # check local-rib self.assertTrue(path_exists_in_localrib(peer3,r1)) self.assertFalse(path_exists_in_localrib(peer3,r2,r=1)) self.assertTrue(path_exists_in_localrib(peer3,r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertTrue(path_exists_in_routing_table(peer3, r3)) """ export-policy test r1:192.168.2.0 r2:192.168.20.0 r3:192.168.200.0 ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r2,r3)-> rib ->(r1)-> adj-rib-out | ->(r1)-> peer3 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r2,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> peer3 ------------------------------------------------- """ @nose.tools.nottest def test_04_export_policy_update(self): peer1 = "10.0.0.1" peer2 = "10.0.0.2" peer3 = "10.0.0.3" r1 = "192.168.2.0/24" r2 = "192.168.20.0/24" r3 = "192.168.200.0/24" w = self.wait_per_retry # policy:test_04_export_policy_update which rejects paths # that are 192.168.2.0/24, 192.168.20.0/24, 192.168.200.0/24 # and coming from peer2(10.0.0.2) # is attached to peer3(10.0.0.3)'s export-policy. self.setup_config(peer3, "test_04_export_policy_update", "export") self.initialize() # add other network tn = qaccess.login(peer2) print "add network 192.168.20.0/24" qaccess.add_network(tn, 65002, r2) print "add network 192.168.200.0/24" qaccess.add_network(tn, 65002, r3) qaccess.logout(tn) addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") time.sleep(self.initial_wait_time) def path_exists_in_localrib(peer, prefix,r=10): paths = self.get_paths_in_localrib(peer, prefix, retry=r) return paths is not None def path_exists_in_routing_table(peer, prefix,r=10): qpath = self.get_route(peer, prefix, retry=r, interval=w) return qpath is not None def path_exists_in_adj_rib_in(peer, prefix,r=10): path = self.get_adj_rib_in(peer, prefix, retry=r, interval=w) return path is not None def path_exists_in_adj_rib_out(peer, prefix,r=10): path = self.get_adj_rib_out(peer, prefix, retry=r, interval=w) return path is not None self.assertTrue(path_exists_in_localrib(peer1,r1)) self.assertTrue(path_exists_in_localrib(peer1,r2)) self.assertTrue(path_exists_in_localrib(peer1,r3)) # check peer3 local-rib self.assertTrue(path_exists_in_localrib(peer3,r1)) self.assertTrue(path_exists_in_localrib(peer3,r2)) self.assertTrue(path_exists_in_localrib(peer3,r3)) # check peer3 rib-out self.assertTrue(path_exists_in_adj_rib_out(peer3,r1)) self.assertFalse(path_exists_in_adj_rib_out(peer3,r2,r=1)) self.assertFalse(path_exists_in_adj_rib_out(peer3,r3,r=1)) # check show ip bgp on peer1(quagga1) self.assertTrue(path_exists_in_routing_table(peer1, r1)) self.assertTrue(path_exists_in_routing_table(peer1, r2)) self.assertTrue(path_exists_in_routing_table(peer1, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2,r=1)) self.assertFalse(path_exists_in_routing_table(peer3, r3,r=1)) # check adj-rib-out in peer2 peer2 = "10.0.0.2" self.assertTrue(path_exists_in_adj_rib_in(peer2, r1)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r2)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r3)) # update policy print "update_policy_config" self.set_policy(peer3, "export", "test_04_export_policy_update_softreset") time.sleep(self.initial_wait_time) # soft reset print "soft_reset" self.soft_reset(peer2, IPv4) # check local-rib self.assertTrue(path_exists_in_localrib(peer3,r1)) self.assertTrue(path_exists_in_localrib(peer3,r2)) self.assertTrue(path_exists_in_localrib(peer3,r3)) # check local-adj-out-rib self.assertTrue(path_exists_in_adj_rib_out(peer3, r1)) self.assertFalse(path_exists_in_adj_rib_out(peer3, r2, r=1)) self.assertTrue(path_exists_in_adj_rib_out(peer3, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertTrue(path_exists_in_routing_table(peer3, r3)) """ import-policy test r1=2001:0:10:2::/64 -------------------------------------------------- peer2 ->(r1)-> | ->(r1)-> peer1-rib ->(r1)-> peer1-adj-rib-out | ->(r1)-> peer1 | | | ->x peer3-rib | -------------------------------------------------- """ def test_05_import_policy_initial_ipv6(self): peer1 = "2001::192:168:0:1" peer2 = "2001::192:168:0:2" peer3 = "2001::192:168:0:3" r1 = "2001:0:10:2::/64" w = self.wait_per_retry self.use_ipv6_gobgp = True # policy:test_06_export_policy_initial_ipv6 which rejects paths # that are 2001:0:10:2:: (64...128) and coming from peer2(2001::192:168:0:2) # is attached to peer3(2001::192:168:0:3)'s import-policy. self.setup_config(peer3, "test_05_import_policy_initial_ipv6", "import") self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, r1, retry=self.retry_count_common, af=IPv6, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r1, retry=self.retry_count_common, af=IPv6) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_adj_rib_in(peer2, r1, retry=self.retry_count_common, af=IPv6) self.assertIsNotNone(path) path = self.get_paths_in_localrib(peer3, r1, retry=0, af=IPv6) self.assertIsNone(path) # check show ip bgp on peer1(quagga3) qpath = self.get_route(peer3, r1, retry=1, interval=w, af=IPv6) self.assertIsNone(qpath) """ export-policy test r1=2001:0:10:2::/64 -------------------------------------------------- peer2 ->(r1)-> | ->(r1)-> peer1-rib ->(r1)-> peer1-adj-rib-out | ->(r1)-> peer1 | | | ->(r1)-> peer3-rib ->x peer3-adj-rib-out | -------------------------------------------------- """ def test_06_export_policy_initial_ipv6(self): peer1 = "2001::192:168:0:1" peer2 = "2001::192:168:0:2" peer3 = "2001::192:168:0:3" r1 = "2001:0:10:2::/64" w = self.wait_per_retry self.use_ipv6_gobgp = True # policy:test_06_export_policy_initial_ipv6 which rejects paths # that are 2001:0:10:2:: (64...128) and coming from peer2(2001::192:168:0:2) # is attached to peer3(2001::192:168:0:3)'s export-policy. self.setup_config(peer3, "test_06_export_policy_initial_ipv6", "export") self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") paths = self.get_paths_in_localrib(peer1, r1, retry=self.retry_count_common, interval=w, af=IPv6) self.assertIsNotNone(paths) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r1, retry=self.retry_count_common, interval=w, af=IPv6) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_adj_rib_in(peer2, r1, retry=1, interval=w, af=IPv6) self.assertIsNotNone(path) path = self.get_paths_in_localrib(peer3, r1, af=IPv6, interval=w) self.assertIsNotNone(path) path = self.get_adj_rib_out(peer3, r1, retry=1, interval=w, af=IPv6) self.assertIsNone(path) # check show ip bgp on peer1(quagga3) qpath = self.get_route(peer3, r1, retry=1, interval=w, af=IPv6) self.assertIsNone(qpath) """ import-policy test r1=2001:0:10:2::/64 r2=2001:0:10:20::/64 r3=2001:0:10:200::/64 ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> peer3 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> peer3 ------------------------------------------------- """ def test_07_import_policy_update(self): peer1 = "2001::192:168:0:1" peer2 = "2001::192:168:0:2" peer3 = "2001::192:168:0:3" r1 = "2001:0:10:2::/64" r2 = "2001:0:10:20::/64" r3 = "2001:0:10:200::/64" w = self.wait_per_retry self.use_ipv6_gobgp = True # policy:test_07_import_policy_update which rejects paths # that are 2001:0:10:2::/64, 2001:0:10:20::/64, 2001:0:10:200::/64 # and coming from peer2(2001::192:168:0:2) # is attached to peer3(2001::192:168:0:3)'s import-policy. self.setup_config(peer3, "test_07_import_policy_update", "import") self.initialize() # add other network tn = qaccess.login(peer2) print "add network 2001:0:10:20::/64" qaccess.add_network(tn, 65002, r2, use_ipv6=True) print "add network 2001:0:10:200::/64" qaccess.add_network(tn, 65002, r3, use_ipv6=True) qaccess.logout(tn) addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") time.sleep(self.initial_wait_time) def path_exists_in_localrib(peer, prefix, r=10): paths = self.get_paths_in_localrib(peer, prefix, retry=r, interval=w, af=IPv6) return paths is not None def path_exists_in_routing_table(peer, prefix, r=10): qpath = self.get_route(peer, prefix, retry=r, interval=w, af=IPv6) return qpath is not None def path_exists_in_adj_rib_in(peer, prefix, r=10): path = self.get_adj_rib_in(peer, prefix, retry=r, interval=w, af=IPv6) return path is not None self.assertTrue(path_exists_in_localrib(peer1, r1)) self.assertTrue(path_exists_in_localrib(peer1, r2)) self.assertTrue(path_exists_in_localrib(peer1, r3)) self.assertTrue(path_exists_in_localrib(peer3, r1)) self.assertFalse(path_exists_in_localrib(peer3, r2, r=1)) self.assertFalse(path_exists_in_localrib(peer3, r3, r=1)) # check show ip bgp on peer1(quagga1) self.assertTrue(path_exists_in_routing_table(peer1, r1)) self.assertTrue(path_exists_in_routing_table(peer1, r2)) self.assertTrue(path_exists_in_routing_table(peer1, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertFalse(path_exists_in_routing_table(peer3, r3, r=1)) # check adj-rib-out in peer2 self.assertTrue(path_exists_in_adj_rib_in(peer2, r1)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r2)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r3)) # update policy print "update_policy_config" self.set_policy(peer3, "import", "test_07_import_policy_update_softreset") time.sleep(self.initial_wait_time) # soft reset print "soft_reset" self.soft_reset(peer2, IPv6) # check local-rib self.assertTrue(path_exists_in_localrib(peer3, r1)) self.assertFalse(path_exists_in_localrib(peer3, r2, r=1)) self.assertTrue(path_exists_in_localrib(peer3, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertTrue(path_exists_in_routing_table(peer3, r3)) """ export-policy test r1=2001:0:10:2::/64 r2=2001:0:10:20::/64 r3=2001:0:10:200::/64 ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r2,r3)-> rib ->(r1)-> adj-rib-out | ->(r1)-> peer3 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r2,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> peer3 ------------------------------------------------- """ @nose.tools.nottest def test_08_export_policy_update(self): peer1 = "2001::192:168:0:1" peer2 = "2001::192:168:0:2" peer3 = "2001::192:168:0:3" r1 = "2001:0:10:2::/64" r2 = "2001:0:10:20::/64" r3 = "2001:0:10:200::/64" w = self.wait_per_retry self.use_ipv6_gobgp = True # policy:test_08_export_policy_update which rejects paths # that are 2001:0:10:2::/64, 2001:0:10:20::/64, 2001:0:10:200::/64 # and coming from peer2(2001::192:168:0:2) # is attached to peer3(2001::192:168:0:3)'s export-policy. self.setup_config(peer3, "test_08_export_policy_update", "export") self.initialize() # add other network tn = qaccess.login(peer2) print "add network 2001:0:10:20::/64" qaccess.add_network(tn, 65002, r2, use_ipv6=True) print "add network 2001:0:10:200::/64" qaccess.add_network(tn, 65002, r3, use_ipv6=True) qaccess.logout(tn) addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") time.sleep(self.initial_wait_time) def path_exists_in_localrib(peer, prefix, r=10): paths = self.get_paths_in_localrib(peer, prefix, retry=r, interval=w, af=IPv6) return paths is not None def path_exists_in_routing_table(peer, prefix, r=10): qpath = self.get_route(peer, prefix, retry=r, interval=w, af=IPv6) return qpath is not None def path_exists_in_adj_rib_in(peer, prefix, r=10): path = self.get_adj_rib_in(peer, prefix, retry=r, interval=w, af=IPv6) return path is not None def path_exists_in_adj_rib_out(peer, prefix, r=10): path = self.get_adj_rib_out(peer, prefix, retry=r, interval=w, af=IPv6) return path is not None self.assertTrue(path_exists_in_localrib(peer1, r1)) self.assertTrue(path_exists_in_localrib(peer1, r2)) self.assertTrue(path_exists_in_localrib(peer1, r3)) # check peer3 local-rib self.assertTrue(path_exists_in_localrib(peer3, r1)) self.assertTrue(path_exists_in_localrib(peer3, r2)) self.assertTrue(path_exists_in_localrib(peer3, r3)) # check peer3 rib-out self.assertTrue(path_exists_in_adj_rib_out(peer3, r1)) self.assertFalse(path_exists_in_adj_rib_out(peer3, r2, r=1)) self.assertFalse(path_exists_in_adj_rib_out(peer3, r3, r=1)) # check show ip bgp on peer1(quagga1) self.assertTrue(path_exists_in_routing_table(peer1, r1)) self.assertTrue(path_exists_in_routing_table(peer1, r2)) self.assertTrue(path_exists_in_routing_table(peer1, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertFalse(path_exists_in_routing_table(peer3, r3, r=1)) # check adj-rib-out in peer2 self.assertTrue(path_exists_in_adj_rib_in(peer2, r1)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r2)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r3)) # update policy print "update_policy_config" self.set_policy(peer3, "export", "test_08_export_policy_update_softreset") time.sleep(self.initial_wait_time) # soft reset print "soft_reset" self.soft_reset(peer2, "ipv6") # check local-rib self.assertTrue(path_exists_in_localrib(peer3, r1)) self.assertTrue(path_exists_in_localrib(peer3, r2)) self.assertTrue(path_exists_in_localrib(peer3, r3)) # check local-adj-out-rib self.assertTrue(path_exists_in_adj_rib_out(peer3, r1)) self.assertFalse(path_exists_in_adj_rib_out(peer3, r2, r=1)) # Currently this test fails because of export_policy handling self.assertTrue(path_exists_in_adj_rib_out(peer3, r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertTrue(path_exists_in_routing_table(peer3, r3)) """ import-policy test --------------------------------------- exabgp ->(aspath_length=10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_09_aspath_length_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry self.quagga_num = 2 # policy:test_09_aspath_length_condition_import which rejects paths # whose aspath length is greater than or equal 10 # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_09_aspath_length_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) print qpath self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp ->(aspath=[65100,...])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_10_aspath_from_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_10_aspath_from_condition_import which rejects paths # that come from AS65100 is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_10_aspath_from_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp ->(aspath=[...65098,...])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_11_aspath_any_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_11_aspath_any_condition_import which rejects paths # that contain 65098 in its aspath attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_11_aspath_any_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp ->(aspath=[...,65090])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_12_aspath_origin_condition_import(self): # initialize test environment # policy_pattern:AspFrom attaches a policy for rejecting a path that has 65090 at last in its aspath attr # to peer2(10.0.0.2)'s import-policy. # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_12_aspath_origin_condition_import which rejects paths # that have 65090 at last in its aspath attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_12_aspath_origin_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp -> (aspath=[65100]) -> | -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_13_aspath_only_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asn = '65100' e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=asn) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_13_aspath_only_condition_import which rejects paths # that have only 65100 in its aspath attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_13_aspath_only_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp ->(aspath=[...,65090])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 --------------------------------------- This case check if policy passes the path to peer2 because of condition mismatch. """ def test_14_aspath_only_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_16_community_condition_regexp_import which rejects paths # that have 65090 at last in its aspath attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_14_aspath_only_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNotNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_15_community_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_15_community_condition_import which rejects paths # that have 65100:10 in its community attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_15_community_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1, interval=w) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_16_community_condition_regexp_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_16_community_condition_regexp_import which rejects paths # that have 65100:10 in its community attr # is attached to peer2(10.0.0.2)'s import-policy. # This policy uses a regexp as the community condition. self.setup_config(peer2, "test_16_community_condition_regexp_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) print qpath self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1, interval=w) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_17_community_add_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_17_community_add_action_import which adds community 65100:10 # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_17_community_add_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 20) in attrs[0]['communites']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:20', retry=0)) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_18_community_replace_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_18_community_replace_action_import which replace with # community 65100:10 is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_18_community_replace_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 20) in attrs[0]['communites']) self.assertTrue((65100 << 16 | 30) in attrs[0]['communites']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:20', retry=0)) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:30', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:10', retry=0)) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 (community=65100:20) | | (community=65100:30) | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_19_community_remove_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 65100:20 65100:30 ' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_19_community_remove_action_import which removes # community 65100:20 65100:30 is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_19_community_remove_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 20) not in attrs[0]['communites']) self.assertTrue((65100 << 16 | 30) not in attrs[0]['communites']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:10', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:20', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:30', retry=0)) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 (community=65100:20) | | (community=65100:30) | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_20_community_null_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 65100:20 65100:30 ' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_20_community_null_action_import which removes all community # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_20_community_null_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertFalse('communites' in attrs) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:20', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:30', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:10', retry=0)) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_21_community_add_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_21_community_add_action_export which adds community 65100:20 # is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_21_community_add_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1,retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertFalse((65100 << 16 | 20) in attrs[0]['communites']) # check out-rib path = self.get_adj_rib_out(peer2, prefix1, retry=0) attrs = [x for x in path['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 20) in attrs[0]['communites']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:20')) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_22_community_replace_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_22_community_replace_action_export which replaces # communities with 65100:20 and 65100:30 is attached to # peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_22_community_replace_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertFalse((65100 << 16 | 20) in attrs[0]['communites']) self.assertFalse((65100 << 16 | 30) in attrs[0]['communites']) # check out-rib path = self.get_adj_rib_out(peer2, prefix1, retry=1) attrs = [x for x in path['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 20) in attrs[0]['communites']) self.assertTrue((65100 << 16 | 30) in attrs[0]['communites']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:20')) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:30')) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:10', retry=0)) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 (community=65100:20) | | (community=65100:30) | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_23_community_remove_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 65100:20 65100:30 ' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_23_community_remove_action_export which removes # community 65100:20 and 65100:30 is attached to # peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_23_community_remove_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 20) in attrs[0]['communites']) self.assertTrue((65100 << 16 | 30) in attrs[0]['communites']) # check out-rib path = self.get_adj_rib_out(peer2, prefix1, retry=1) attrs = [x for x in path['attrs'] if 'communites' in x ] self.assertFalse((65100 << 16 | 20) in attrs[0]['communites']) self.assertFalse((65100 << 16 | 30) in attrs[0]['communites']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_community(peer2, prefix1.split('/')[0], '65100:10', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:20', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:30', retry=0)) """ import-policy test --------------------------------------- exabgp ->(community=65100:10)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 (community=65100:20) | | (community=65100:30) | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_24_community_null_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 65100:20 65100:30 ' as_path = reduce(lambda a,b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_24_community_null_action_export which removes its community attr # is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_24_community_null_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'communites' in x ] self.assertTrue((65100 << 16 | 10) in attrs[0]['communites']) self.assertTrue((65100 << 16 | 20) in attrs[0]['communites']) self.assertTrue((65100 << 16 | 30) in attrs[0]['communites']) # check out-rib path = self.get_adj_rib_out(peer2, prefix1, retry=1) attrs = [x for x in path['attrs'] if 'communites' in x ] self.assertFalse('communites' in attrs) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:20', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:30', retry=0)) self.assertFalse(self.check_community(peer2, prefix1.split('/')[0], '65100:10', retry=0)) """ import-policy test --------------------------------------- exabgp ->(med=300)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_25_med_replace_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community, med=med) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_25_med_replace_action_import which replace 100 in its med attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_25_med_replace_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'metric' in x] self.assertTrue(100 == attrs[0]['metric']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_med(peer2, prefix1.split('/'), 100, retry=0)) """ import-policy test --------------------------------------- exabgp ->(med=300)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_26_med_add_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community, med=med) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_26_med_add_action_import which add 100 in its med attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_26_med_add_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'metric' in x] self.assertTrue(400 == attrs[0]['metric']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_med(peer2, prefix1.split('/'), 400, retry=0)) """ import-policy test --------------------------------------- exabgp ->(med=300)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_27_med_subtract_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community, med=med) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_27_med_subtract_action_import which subtract 100 in its med attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_27_med_subtract_action_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'metric' in x] self.assertTrue(200 == attrs[0]['metric']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_med(peer2, prefix1.split('/'), 200, retry=0)) """ export-policy test --------------------------------------- exabgp ->(med=300)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_28_med_replace_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community, med=med) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_28_med_replace_action_export which replace 100 in its med attr # is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_28_med_replace_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'metric' in x] self.assertFalse(100 == attrs[0]['metric']) # check adj-rib-out path = self.get_adj_rib_out(peer2, prefix1, retry=1) attrs = [x for x in path['attrs'] if 'metric' in x] self.assertTrue(100 == attrs[0]['metric']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_med(peer2, prefix1.split('/'), 100, retry=0)) """ export-policy test --------------------------------------- exabgp ->(med=300)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_29_med_add_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community, med=med) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_29_med_add_action_export which add 100 in its med attr # is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_29_med_add_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'metric' in x] self.assertFalse(400 == attrs[0]['metric']) # check adj-rib-out path = self.get_adj_rib_out(peer2, prefix1, retry=1) attrs = [x for x in path['attrs'] if 'metric' in x] self.assertTrue(400 == attrs[0]['metric']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_med(peer2, prefix1.split('/'), 400, retry=0)) """ export-policy test --------------------------------------- exabgp ->(med=300)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_30_med_subtract_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = '65100:10' as_path = reduce(lambda a,b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, community=community, med=med) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_30_med_subtract_action_export which subtract 100 in its med attr # is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_30_med_subtract_action_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1) self.assertIsNotNone(path) attrs = [x for x in path[0]['attrs'] if 'metric' in x] self.assertFalse(200 == attrs[0]['metric']) # check adj-rib-out path = self.get_adj_rib_out(peer2, prefix1, retry=1) attrs = [x for x in path['attrs'] if 'metric' in x] self.assertTrue(200 == attrs[0]['metric']) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) self.assertTrue(self.check_med(peer2, prefix1.split('/'), 200, retry=0)) """ distribute-policy test --------------------- exabgp ->r1(community=65100:10) -> x | -> peer1-rib -> | -> r2 --> peer1 r2(192.168.10.0/24) -> o | | | -> peer2-rib -> | -> r2 --> peer2 --------------------- """ def test_31_distribute_reject(self): # generate exabgp configuration file r1 = "192.168.100.0/24" r2 = "192.168.10.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 65100:20 65100:30 ' as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(r1, aspath=as_path, community=community) e.add_route(r2, aspath='65100') e.write() self.quagga_num = 2 self.use_exa_bgp = True self.use_ipv6_gobgp = False peer1 = "10.0.0.1" peer2 = "10.0.0.2" exabgp = "10.0.0.100" w = self.wait_per_retry # policy:test_31_distribute_reject which rejects routes that have community=65100:10 # is attached to exabgp(10.0.0.100)'s distribute policy. self.setup_config(exabgp, "test_31_distribute_reject", "distribute", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(qpath) path = self.get_paths_in_localrib(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(qpath) path = self.get_paths_in_localrib(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) """ distribute-policy test --------------------- exabgp ->r1(community=65100:10) -> x | -> peer1-rib -> | -> r2 --> peer1 r2(192.168.10.0/24) -> o | | | -> peer2-rib -> | -> r2 --> peer2 --------------------- """ def test_32_distribute_accept(self): # generate exabgp configuration file r1 = "192.168.100.0/24" r2 = "192.168.10.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 65100:20 65100:30 ' as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(r1, aspath=as_path, community=community) e.add_route(r2, aspath='65100') e.write() self.quagga_num = 2 self.use_exa_bgp = True self.use_ipv6_gobgp = False peer1 = "10.0.0.1" peer2 = "10.0.0.2" exabgp = "10.0.0.100" w = self.wait_per_retry # policy:test_32_distribute_accept which accepts 192.168.10.0/24 # is attached to exabgp(10.0.0.100)'s distribute policy. self.setup_config(exabgp, "test_32_distribute_accept", "distribute", add_exabgp=True, defaultReject=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(qpath) path = self.get_paths_in_localrib(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNone(qpath) path = self.get_paths_in_localrib(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) """ distribute-policy test --------------------- exabgp ->r1(community=65100:10) -> o | -> peer1-rib -> | -> r1(community=65100:10, 65100:20), r2 --> peer1 r2(192.168.10.0/24) -> o | | | -> peer2-rib -> | -> r1(community=65100:10, 65100:20), r2 --> peer2 --------------------- """ def test_33_distribute_set_community_action(self): # generate exabgp configuration file r1 = "192.168.100.0/24" r2 = "192.168.10.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 ' as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(r1, aspath=as_path, community=community) e.add_route(r2, aspath='65100') e.write() self.quagga_num = 2 self.use_exa_bgp = True self.use_ipv6_gobgp = False peer1 = "10.0.0.1" peer2 = "10.0.0.2" exabgp = "10.0.0.100" w = self.wait_per_retry # policy:test_33_distribute_set_community_action which set community # attr is attached to exabgp(10.0.0.100)'s distribute policy. self.setup_config(exabgp, "test_33_distribute_set_community_action", "distribute", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) # check show ip bgp on peer2(quagga2) self.assertTrue(self.check_community(peer1, r1.split('/')[0], '65100:10', retry=0)) self.assertTrue(self.check_community(peer1, r1.split('/')[0], '65100:20', retry=0)) self.assertTrue(self.check_community(peer2, r1.split('/')[0], '65100:10', retry=0)) self.assertTrue(self.check_community(peer2, r1.split('/')[0], '65100:20', retry=0)) """ distribute-policy test --------------------- exabgp ->r1(med=300) -> o | -> peer1-rib -> | -> r1(med=400), r2 --> peer1 r2(192.168.10.0/24) -> o | | | -> peer2-rib -> | -> r1(med=400), r2 --> peer2 --------------------- """ def test_34_distribute_set_med_action(self): # generate exabgp configuration file r1 = "192.168.100.0/24" r2 = "192.168.10.0/24" asns = ['65100'] + [ str(asn) for asn in range(65099, 65090, -1) ] community = ' 65100:10 ' as_path = reduce(lambda a, b: a + " " + b, asns) med = "300" e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(r1, aspath=as_path, community=community, med=med) e.add_route(r2, aspath='65100') e.write() self.quagga_num = 2 self.use_exa_bgp = True self.use_ipv6_gobgp = False peer1 = "10.0.0.1" peer2 = "10.0.0.2" exabgp = "10.0.0.100" w = self.wait_per_retry # policy:test_34_distribute_set_med_action which subtract 100 in its med attr # is attached to peer2(10.0.0.2)'s distribute-policy. self.setup_config(exabgp, "test_34_distribute_set_med_action", "distribute", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, r1, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) path = self.get_paths_in_localrib(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer2, r2, retry=self.retry_count_common, interval=w) self.assertIsNotNone(qpath) # check show ip bgp on peer2(quagga2) self.assertTrue(self.check_med(peer1, r1.split('/'), 400, retry=0)) self.assertTrue(self.check_med(peer2, r1.split('/'), 400, retry=0)) """ import-policy test r1:192.168.2.0 r2:192.168.20.0 r3:192.168.200.0 ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> peer3 ------------------------------------------------- | update distribute policy | V ------------------------------------------------- |peer1 | peer2 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> peer1 | | |peer3 | | ->(r1,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> peer3 ------------------------------------------------- """ def test_35_distribute_policy_update(self): # initialize test environment peer1 = "10.0.0.1" peer2 = "10.0.0.2" peer3 = "10.0.0.3" r1 = "192.168.2.0/24" r2 = "192.168.20.0/24" r3 = "192.168.200.0/24" w = self.wait_per_retry # policy:test_28_distribute_policy_update which rejects routes # 192.168.20.0/24, 192.168.200.0/24 from peer2 is attached to peer2. # After policy's update, 192.168.200.0/24 can go through. self.setup_config(peer2, "test_35_distribute_policy_update", "distribute") self.initialize() # add other network tn = qaccess.login(peer2) print "add network 192.168.20.0/24" qaccess.add_network(tn, 65002, r2) print "add network 192.168.200.0/24" qaccess.add_network(tn, 65002, r3) qaccess.logout(tn) addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") time.sleep(self.initial_wait_time) def path_exists_in_localrib(peer, prefix,r=10): paths = self.get_paths_in_localrib(peer, prefix, retry=r, interval=w) return paths is not None def path_exists_in_routing_table(peer, prefix,r=10): qpath = self.get_route(peer, prefix, retry=r, interval=w) return qpath is not None def path_exists_in_adj_rib_in(peer, prefix,r=10): path = self.get_adj_rib_in(peer, prefix, retry=r, interval=w) return path is not None self.assertTrue(path_exists_in_localrib(peer1,r1)) self.assertFalse(path_exists_in_localrib(peer1,r2, r=1)) self.assertFalse(path_exists_in_localrib(peer1,r3, r=0)) self.assertTrue(path_exists_in_localrib(peer3,r1)) self.assertFalse(path_exists_in_localrib(peer3,r2, r=1)) self.assertFalse(path_exists_in_localrib(peer3,r3, r=0)) # check show ip bgp on peer1(quagga1) self.assertTrue(path_exists_in_routing_table(peer1, r1)) self.assertFalse(path_exists_in_routing_table(peer1, r2, r=1)) self.assertFalse(path_exists_in_routing_table(peer1, r3, r=0)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertFalse(path_exists_in_routing_table(peer3, r3, r=0)) # check adj-rib-in in peer2 self.assertTrue(path_exists_in_adj_rib_in(peer2, r1)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r2)) self.assertTrue(path_exists_in_adj_rib_in(peer2, r3)) # update policy print "update_policy_config" self.set_policy(peer2, "distribute", "test_35_distribute_policy_update_softreset") time.sleep(self.initial_wait_time) # soft reset print "soft_reset" self.soft_reset(peer2, IPv4) # check local-rib self.assertTrue(path_exists_in_localrib(peer1,r1)) self.assertFalse(path_exists_in_localrib(peer1,r2, r=1)) self.assertTrue(path_exists_in_localrib(peer1,r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer1, r1)) self.assertFalse(path_exists_in_routing_table(peer1, r2, r=1)) self.assertTrue(path_exists_in_routing_table(peer1, r3)) # check local-rib self.assertTrue(path_exists_in_localrib(peer3,r1)) self.assertFalse(path_exists_in_localrib(peer3,r2,r=1)) self.assertTrue(path_exists_in_localrib(peer3,r3)) # check show ip bgp on peer3(quagga3) self.assertTrue(path_exists_in_routing_table(peer3, r1)) self.assertFalse(path_exists_in_routing_table(peer3, r2, r=1)) self.assertTrue(path_exists_in_routing_table(peer3, r3)) """ import-policy test --------------------------------------- exabgp ->(aspath=[65100 65099 65000])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_36_aspath_prepend_action_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100', '65099', '65000'] as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" # policy:test_36_aspath_prepend_action_import which prepends asnumber 65005 # 5 times is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_36_aspath_prepend_action_import", "import", add_exabgp=True) self.initialize() def get_asseq(target): attrs = [p for p in target[0]['attrs'] if p['type'] == 2] path_asns = [a['asns'] for a in attrs[0]['as_paths'] if a['segment_type'] == 2] return path_asns[0] addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check as path path_asns = qpath['aspath'] expected = asns self.assertListEqual(path_asns, expected) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in ['65005'] * 5 + asns ] self.assertListEqual(asseq, expected) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) print(qpath) # check as path path_asns = qpath['aspath'] expected = ['65005'] * 5 + asns self.assertListEqual(path_asns, expected) """ export-policy test --------------------------------------- exabgp ->(aspath=[65100 65099 65000])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_37_aspath_prepend_action_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100', '65099', '65000'] as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" # policy:test_37_aspath_prepend_action_export which prepends asnumber 65005 # 5 times is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_37_aspath_prepend_action_export", "export", add_exabgp=True) self.initialize() def get_asseq(target): attrs = [p for p in target[0]['attrs'] if p['type'] == 2] path_asns = [a['asns'] for a in attrs[0]['as_paths'] if a['segment_type'] == 2] return path_asns[0] addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check as path path_asns = qpath['aspath'] expected = asns self.assertListEqual(path_asns, expected) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check as path path_asns = qpath['aspath'] expected = ['65005'] * 5 + asns self.assertListEqual(path_asns, expected) """ import-policy test --------------------------------------- exabgp ->(aspath=[65100 65099 65000])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_38_aspath_prepend_action_lastas_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100', '65099', '65000'] as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" # policy:test_38_aspath_prepend_action_lastas_import which prepends # the leftmost asnumber 5 times is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_38_aspath_prepend_action_lastas_import", "import", add_exabgp=True) self.initialize() def get_asseq(target): attrs = [p for p in target[0]['attrs'] if p['type'] == 2] path_asns = [a['asns'] for a in attrs[0]['as_paths'] if a['segment_type'] == 2] return path_asns[0] addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1,prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check as path path_asns = qpath['aspath'] expected = asns self.assertListEqual(path_asns, expected) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in ['65100'] * 5 + asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) print(qpath) # check as path path_asns = qpath['aspath'] expected = ['65100'] * 5 + asns self.assertListEqual(path_asns, expected) """ export-policy test --------------------------------------- exabgp ->(aspath=[65100 65099 65000])->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | apply action | --------------------------------------- """ def test_39_aspath_prepend_action_lastas_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100', '65099', '65000'] as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" # policy:test_39_aspath_prepend_action_lastas_export which prepends # the leftmost asnumber 5 times is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_39_aspath_prepend_action_lastas_export", "export", add_exabgp=True) self.initialize() def get_asseq(target): attrs = [p for p in target[0]['attrs'] if p['type'] == 2] path_asns = [a['asns'] for a in attrs[0]['as_paths'] if a['segment_type'] == 2] return path_asns[0] addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check as path path_asns = qpath['aspath'] expected = asns self.assertListEqual(path_asns, expected) # check adj-rib-out in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=0) self.assertIsNotNone(path) # check aspath asseq = get_asseq(path) expected = [int(n) for n in asns] self.assertListEqual(asseq, expected) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check as path path_asns = qpath['aspath'] expected = ['65100'] * 5 + asns self.assertListEqual(path_asns, expected) """ import-policy test --------------------------------------- exabgp ->(extcommunity=origin:65001.65100:200)->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | ->x peer2-rib | --------------------------------------- """ def test_40_ecommunity_origin_condition_import(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [str(asn) for asn in range(65099, 65090, -1)] extcommunity = 'origin:4259970636:200' as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, extcommunity=extcommunity) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_40_ecommunity_origin_condition_import which rejects paths # that have origin:4259970636:200 in its extended community attr # is attached to peer2(10.0.0.2)'s import-policy. self.setup_config(peer2, "test_40_ecommunity_origin_condition_import", "import", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") # check local-rib in peer1 path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1, interval=w) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=1, interval=w) self.assertIsNone(qpath) """ export-policy test --------------------------------------- exabgp ->(extcommunity=origin:65010:320)-> | -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib ->x peer2-adj-rib-out | --------------------------------------- """ def test_41_ecommunity_target_condition_export(self): # generate exabgp configuration file prefix1 = "192.168.100.0/24" asns = ['65100'] + [str(asn) for asn in range(65099, 65090, -1)] extcommunity = 'target:65010:320' as_path = reduce(lambda a, b: a + " " + b, asns) e = ExabgpConfig(EXABGP_COMMON_CONF) e.add_route(prefix1, aspath=as_path, extcommunity=extcommunity) e.write() self.quagga_num = 2 peer1 = "10.0.0.1" peer2 = "10.0.0.2" w = self.wait_per_retry # policy:test_41_ecommunity_target_condition_export which rejects paths # that have target:65010:320 in its extended community attr # is attached to peer2(10.0.0.2)'s export-policy. self.setup_config(peer2, "test_41_ecommunity_target_condition_export", "export", add_exabgp=True) self.initialize() addresses = self.get_neighbor_address(self.gobgp_config) self.retry_routine_for_state(addresses, "BGP_FSM_ESTABLISHED") # check local-rib in peer1 path = self.get_paths_in_localrib(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(path) # check show ip bgp on peer1(quagga1) qpath = self.get_route(peer1, prefix1, retry=self.retry_count_common) self.assertIsNotNone(qpath) # check local-rib in peer2 path = self.get_paths_in_localrib(peer2, prefix1, retry=1, interval=w) self.assertIsNotNone(path) # check local-rib in peer2 path = self.get_adj_rib_out(peer2, prefix1, retry=1, interval=w) self.assertIsNone(path) # check show ip bgp on peer2(quagga2) qpath = self.get_route(peer2, prefix1, retry=1, interval=w) self.assertIsNone(qpath) class ExabgpConfig(object): basic_conf_begin = ''' neighbor 10.0.255.1 { router-id 192.168.0.7; local-address 10.0.0.100; local-as 65100; peer-as 65000; hold-time 90; md5 "hoge100"; graceful-restart; family { inet unicast; } static { # static routes ''' basic_conf_end = ''' } } ''' def __init__(self, config_name): self.o = StringIO.StringIO() self.config_name = config_name print >> self.o, self.basic_conf_begin def add_route(self, prefix, aspath='', community='', med='0', extcommunity=''): value = {'prefix': prefix, 'aspath': aspath, 'community': community, 'med': med, 'extended-community': extcommunity} r = "route %(prefix)s next-hop 10.0.0.100 as-path [%(aspath)s] community [%(community)s] " \ "med %(med)s extended-community [%(extended-community)s];" % value print >> self.o, r def write(self): print >> self.o, self.basic_conf_end pwd = local("pwd", capture=True) conf_dir = pwd + "/exabgp_test_conf" with open(conf_dir + "/" + self.config_name, 'w') as f: f.write(self.o.getvalue()) if __name__ == '__main__': if fab.test_user_check() is False: print "you are not root." sys.exit(1) if fab.docker_pkg_check() is False: print "not install docker package." sys.exit(1) nose.main(argv=sys.argv, addplugins=[OptionParser()], defaultTest=sys.argv[0])