# Copyright (C) 2015 Nippon Telegraph and Telephone Corporation. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or # implied. # See the License for the specific language governing permissions and # limitations under the License. import unittest from fabric.api import local from lib import base from lib.gobgp import * from lib.quagga import * from lib.exabgp import * import sys import os import time import nose from noseplugin import OptionParser, parser_option scenarios = {} def scenario(idx): def wrapped(f): if idx not in scenarios: scenarios[idx] = {} if f.__name__ in scenarios[idx]: raise Exception('scenario index {0}. already exists'.format(idx)) scenarios[idx][f.__name__] = f return wrapped def wait_for(f, timeout=120): interval = 1 count = 0 while True: if f(): return time.sleep(interval) count += interval if count >= timeout: raise Exception('timeout') """ No.1 import-policy test -------------------------------- e1 ->(192.168.2.0/24)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(1) def boot(env): gobgp_ctn_image_name = env.parser_option.gobgp_image log_level = env.parser_option.gobgp_log_level g1 = GoBGPContainer(name='g1', asn=65000, router_id='192.168.0.1', ctn_image_name=gobgp_ctn_image_name, log_level=log_level) e1 = ExaBGPContainer(name='e1', asn=65001, router_id='192.168.0.2') q1 = QuaggaBGPContainer(name='q1', asn=65002, router_id='192.168.0.3') q2 = QuaggaBGPContainer(name='q2', asn=65003, router_id='192.168.0.4') ctns = [g1, e1, q1, q2] initial_wait_time = max(ctn.run() for ctn in ctns) time.sleep(initial_wait_time) br01 = Bridge(name='br01', subnet='192.168.10.0/24') [br01.addif(ctn) for ctn in ctns] for q in [e1, q1, q2]: g1.add_peer(q, is_rs_client=True) q.add_peer(g1) env.g1 = g1 env.e1 = e1 env.q1 = q1 env.q2 = q2 @scenario(1) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.0.0/16', 'MasklengthRange': '16..24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.2.0/24') # this will pass e1.add_route('192.168.2.0/15') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(1) def check(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1)) == 2) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1)) == 2) wait_for(lambda: len(env.q1.get_global_rib()) == 2) wait_for(lambda: len(env.g1.get_local_rib(env.q2)) == 1) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2)) == 1) wait_for(lambda: len(env.q2.get_global_rib()) == 1) """ No.2 export-policy test -------------------------------- e1 ->(192.168.2.0/24)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | -> q2-rib ->x q2-adj-rib-out | -------------------------------- """ @scenario(2) def boot(env): scenarios[1]['boot'](env) @scenario(2) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.0.0/16', 'MasklengthRange': '16..24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.2.0/24') # this will pass e1.add_route('192.168.2.0/15') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(2) def check(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 2) wait_for(lambda : len(q1.get_global_rib()) == 2) wait_for(lambda : len(g1.get_local_rib(q2)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) """ No.3 import-policy update test r1:192.168.2.0/24 r2:192.168.20.0/24 r3:192.168.200.0/24 ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> q2 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> q2 ------------------------------------------------- """ @scenario(3) def boot(env): scenarios[1]['boot'](env) @scenario(3) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} p1 = {'IpPrefix': '192.168.200.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0, p1]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.2.0/24') e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(3) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 3) wait_for(lambda : len(q1.get_global_rib()) == 3) wait_for(lambda : len(g1.get_local_rib(q2)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) @scenario(3) def setup2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 g1.clear_policy() p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) g1.softreset(e1) @scenario(3) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 3) wait_for(lambda : len(q1.get_global_rib()) == 3) wait_for(lambda : len(g1.get_local_rib(q2)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 2) wait_for(lambda : len(q2.get_global_rib()) == 2) """ No.4 export-policy update test r1:192.168.2.0 r2:192.168.20.0 r3:192.168.200.0 ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1,r2,r3)-> rib ->(r1)-> adj-rib-out | ->(r1)-> q2 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1,r2,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> q2 ------------------------------------------------- """ @scenario(4) def boot(env): scenarios[1]['boot'](env) @scenario(4) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} p1 = {'IpPrefix': '192.168.200.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0, p1]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.2.0/24') e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(4) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 3) wait_for(lambda : len(q1.get_global_rib()) == 3) wait_for(lambda : len(g1.get_local_rib(q2)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) @scenario(4) def setup2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 g1.clear_policy() p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) # we need hard reset to flush q2's local rib g1.reset(e1) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(4) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 3) wait_for(lambda : len(q1.get_global_rib()) == 3) wait_for(lambda : len(g1.get_local_rib(q2)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 2) wait_for(lambda : len(q2.get_global_rib()) == 2) """ No.5 IPv6 import-policy test r1=2001::/64 r2=2001::/63 ------------------------------------------------- e1 ->(r1,r2)-> | ->(r1,r2)-> q1-rib ->(r1,r2)-> q1-adj-rib-out | ->(r1,r2)-> q1 | | | ->(r2) -> q2-rib ->(r2) -> q2-adj-rib-out | ->(r2)-> q2 ------------------------------------------------- """ @scenario(5) def boot(env): gobgp_ctn_image_name = env.parser_option.gobgp_image log_level = env.parser_option.gobgp_log_level g1 = GoBGPContainer(name='g1', asn=65000, router_id='192.168.0.1', ctn_image_name=gobgp_ctn_image_name, log_level=log_level) e1 = ExaBGPContainer(name='e1', asn=65001, router_id='192.168.0.2') q1 = QuaggaBGPContainer(name='q1', asn=65002, router_id='192.168.0.3') q2 = QuaggaBGPContainer(name='q2', asn=65003, router_id='192.168.0.4') ctns = [g1, e1, q1, q2] initial_wait_time = max(ctn.run() for ctn in ctns) time.sleep(initial_wait_time) br01 = Bridge(name='br01', subnet='2001::/96') [br01.addif(ctn) for ctn in ctns] for q in [e1, q1, q2]: g1.add_peer(q, is_rs_client=True) q.add_peer(g1) env.g1 = g1 env.e1 = e1 env.q1 = q1 env.q2 = q2 @scenario(5) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '2001::/32', 'MasklengthRange': '64..128'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('2001::/64', rf='ipv6') # this will pass e1.add_route('2001::/63', rf='ipv6') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(5) def check(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1, rf='ipv6')) == 2) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1, rf='ipv6')) == 2) wait_for(lambda: len(env.q1.get_global_rib(rf='ipv6')) == 2) wait_for(lambda: len(env.g1.get_local_rib(env.q2, rf='ipv6')) == 1) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2, rf='ipv6')) == 1) wait_for(lambda: len(env.q2.get_global_rib(rf='ipv6')) == 1) """ No.6 IPv6 export-policy test r1=2001::/64 r2=2001::/63 ------------------------------------------------- e1 ->(r1,r2)-> | ->(r1,r2)-> q1-rib ->(r1,r2)-> q1-adj-rib-out | ->(r1,r2)-> q1 | | | ->(r1,r2)-> q2-rib ->(r2) -> q2-adj-rib-out | ->(r2)-> q2 ------------------------------------------------- """ @scenario(6) def boot(env): scenarios[5]['boot'](env) @scenario(6) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '2001::/32', 'MasklengthRange': '64..128'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('2001::/64', rf='ipv6') # this will pass e1.add_route('2001::/63', rf='ipv6') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(6) def check(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1, rf='ipv6')) == 2) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1, rf='ipv6')) == 2) wait_for(lambda: len(env.q1.get_global_rib(rf='ipv6')) == 2) wait_for(lambda: len(env.g1.get_local_rib(env.q2, rf='ipv6')) == 2) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2, rf='ipv6')) == 1) wait_for(lambda: len(env.q2.get_global_rib(rf='ipv6')) == 1) """ No.7 IPv6 import-policy update test r1=2001:0:10:2::/64 r2=2001:0:10:20::/64 r3=2001:0:10:200::/64 ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> q2 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> q2 ------------------------------------------------- """ @scenario(7) def boot(env): scenarios[5]['boot'](env) @scenario(7) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '2001:0:10:2::/64'} p1 = {'IpPrefix': '2001:0:10:20::/64'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0, p1]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('2001:0:10:2::/64', rf='ipv6') e1.add_route('2001:0:10:20::/64', rf='ipv6') e1.add_route('2001:0:10:200::/64', rf='ipv6') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(7) def check(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.q1.get_global_rib(rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_local_rib(env.q2, rf='ipv6')) == 1) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2, rf='ipv6')) == 1) wait_for(lambda: len(env.q2.get_global_rib(rf='ipv6')) == 1) @scenario(7) def setup2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '2001:0:10:2::/64'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) g1.softreset(e1, rf='ipv6') @scenario(7) def check2(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.q1.get_global_rib(rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_local_rib(env.q2, rf='ipv6')) == 2) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2, rf='ipv6')) == 2) wait_for(lambda: len(env.q2.get_global_rib(rf='ipv6')) == 2) """ No.8 IPv6 export-policy update test r1=2001:0:10:2::/64 r2=2001:0:10:20::/64 r3=2001:0:10:200::/64 ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1,r2,r3)-> rib ->(r1)-> adj-rib-out | ->(r1)-> q2 ------------------------------------------------- | update gobgp.conf | V ------------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2,r3)-> rib ->(r1,r2,r3)-> adj-rib-out | ->(r1,r2,r3)-> q1 | | | q2 | | ->(r1,r2,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> q2 ------------------------------------------------- """ @scenario(8) def boot(env): scenarios[5]['boot'](env) @scenario(8) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '2001:0:10:2::/64'} p1 = {'IpPrefix': '2001:0:10:20::/64'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0, p1]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('2001:0:10:2::/64', rf='ipv6') e1.add_route('2001:0:10:20::/64', rf='ipv6') e1.add_route('2001:0:10:200::/64', rf='ipv6') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(8) def check(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.q1.get_global_rib(rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_local_rib(env.q2, rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2, rf='ipv6')) == 1) wait_for(lambda: len(env.q2.get_global_rib(rf='ipv6')) == 1) @scenario(8) def setup2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '2001:0:10:2::/64'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) g1.reset(e1) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(8) def check2(env): wait_for(lambda: len(env.g1.get_local_rib(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q1, rf='ipv6')) == 3) wait_for(lambda: len(env.q1.get_global_rib(rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_local_rib(env.q2, rf='ipv6')) == 3) wait_for(lambda: len(env.g1.get_adj_rib_out(env.q2, rf='ipv6')) == 2) wait_for(lambda: len(env.q2.get_global_rib(rf='ipv6')) == 2) """ No.9 aspath length condition import-policy test -------------------------------- e1 ->(aspath_length=10)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(9) def boot(env): scenarios[1]['boot'](env) @scenario(9) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'AsPathLength':{'Operator': 'ge', 'Value': 10}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', aspath=range(e1.asn, e1.asn-10, -1)) # this will pass e1.add_route('192.168.200.0/24', aspath=range(e1.asn, e1.asn-8, -1)) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(9) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 2) wait_for(lambda : len(q1.get_global_rib()) == 2) wait_for(lambda : len(g1.get_local_rib(q2)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) """ No.10 aspath from condition import-policy test -------------------------------- e1 ->(aspath=[65100,...])-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(10) def boot(env): scenarios[1]['boot'](env) @scenario(10) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 as0 = {'AsPathSets': {'AsPathSetList': [{'AsPathSetName': 'as0', 'AsPathList': [{'AsPath': '^{0}'.format(e1.asn)}]}]}} g1.set_bgp_defined_set(as0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchAsPathSet':{'AsPathSet': 'as0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', aspath=range(e1.asn, e1.asn-10, -1)) # this will pass e1.add_route('192.168.200.0/24', aspath=range(e1.asn-1, e1.asn-10, -1)) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(10) def check(env): # same check function as previous No.1 scenario scenarios[1]['check'](env) """ No.11 aspath any condition import-policy test -------------------------------- e1 ->(aspath=[...65098,...])-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(11) def boot(env): scenarios[1]['boot'](env) @scenario(11) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 as0 = {'AsPathSets': {'AsPathSetList': [{'AsPathSetName': 'as0', 'AsPathList': [{'AsPath': '65098'}]}]}} g1.set_bgp_defined_set(as0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchAsPathSet':{'AsPathSet': 'as0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', aspath=[65000, 65098, 65010]) # this will pass e1.add_route('192.168.200.0/24', aspath=[65000, 65100, 65010]) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(11) def check(env): # same check function as previous No.1 scenario scenarios[1]['check'](env) """ No.12 aspath origin condition import-policy test -------------------------------- e1 ->(aspath=[...,65090])-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(12) def boot(env): scenarios[1]['boot'](env) @scenario(12) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 as0 = {'AsPathSets': {'AsPathSetList': [{'AsPathSetName': 'as0', 'AsPathList': [{'AsPath': '65090$'}]}]}} g1.set_bgp_defined_set(as0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchAsPathSet':{'AsPathSet': 'as0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', aspath=[65000, 65098, 65090]) # this will pass e1.add_route('192.168.200.0/24', aspath=[65000, 65100, 65010]) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(12) def check(env): # same check function as previous No.1 scenario scenarios[1]['check'](env) """ No.13 aspath only condition import-policy test -------------------------------- e1 -> (aspath=[65100]) -> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(13) def boot(env): scenarios[1]['boot'](env) @scenario(13) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 as0 = {'AsPathSets': {'AsPathSetList': [{'AsPathSetName': 'as0', 'AsPathList': [{'AsPath': '^65100$'}]}]}} g1.set_bgp_defined_set(as0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchAsPathSet':{'AsPathSet': 'as0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', aspath=[65100]) # this will pass e1.add_route('192.168.200.0/24', aspath=[65000, 65100, 65010]) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(13) def check(env): # same check function as previous No.1 scenario scenarios[1]['check'](env) """ No.14 aspath condition mismatch import-policy test ------------------------------- exabgp ->(aspath=[...,65090])->| -> q1-rib -> q1-adj-rib-out | --> q1 | | | -> q2-rib -> q2-adj-rib-out | --> q2 ------------------------------- This case check if policy passes the path to e1 because of condition mismatch. """ @scenario(14) def boot(env): scenarios[1]['boot'](env) @scenario(14) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', aspath=[65100, 65090]) # this will pass e1.add_route('192.168.200.0/24', aspath=[65000, 65100, 65010]) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(14) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 2) wait_for(lambda : len(q1.get_global_rib()) == 2) wait_for(lambda : len(g1.get_local_rib(q2)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 2) wait_for(lambda : len(q2.get_global_rib()) == 2) """ No.15 community condition import-policy test -------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(15) def boot(env): scenarios[1]['boot'](env) @scenario(15) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', community=['65100:10']) # this will pass e1.add_route('192.168.200.0/24', community=['65100:20']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(15) def check(env): # same check function as previous No.1 scenario scenarios[1]['check'](env) """ No.16 community condition regexp import-policy test -------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(16) def boot(env): scenarios[1]['boot'](env) @scenario(16) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '6[0-9]+:[0-9]+'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) # this will be blocked e1.add_route('192.168.100.0/24', community=['65100:10']) # this will pass e1.add_route('192.168.200.0/24', community=['55100:20']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(16) def check(env): # same check function as previous No.4 scenario scenarios[1]['check'](env) """ No.17 community add action import-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=65100:10,65100:20)-> q2 | apply action | ------------------------------- """ @scenario(17) def boot(env): scenarios[1]['boot'](env) @scenario(17) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'ADD', 'SetCommunityMethod': {'Communities': ['65100:20']}}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) def community_exists(path, com): a, b = com.split(':') com = (int(a) << 16) + int(b) for a in path['attrs']: if a['type'] == BGP_ATTR_TYPE_COMMUNITIES and com in a['communities']: return True return False @scenario(17) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 1) wait_for(lambda : len(q1.get_global_rib()) == 1) wait_for(lambda : len(g1.get_local_rib(q2)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) @scenario(17) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1)[0] env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) path = g1.get_adj_rib_out(q2)[0] env.assertTrue(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) """ No.18 community replace action import-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=65100:20)-> q2 | apply action | ------------------------------- """ @scenario(18) def boot(env): scenarios[1]['boot'](env) @scenario(18) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'REPLACE', 'SetCommunityMethod': {'Communities': ['65100:20']}}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(18) def check(env): # same check function as previous No.17 scenario scenarios[17]['check'](env) @scenario(18) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1)[0] env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) path = g1.get_adj_rib_out(q2)[0] env.assertFalse(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) """ No.19 community remove action import-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=null)-> q2 | apply action | ------------------------------- """ @scenario(19) def boot(env): scenarios[1]['boot'](env) @scenario(19) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'REMOVE', 'SetCommunityMethod': {'Communities': ['65100:10', '65100:20']}}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10']) e1.add_route('192.168.110.0/24', community=['65100:10', '65100:20']) e1.add_route('192.168.120.0/24', community=['65100:10', '65100:30']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(19) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_local_rib(q1)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 3) wait_for(lambda : len(q1.get_global_rib()) == 3) wait_for(lambda : len(g1.get_local_rib(q2)) == 3) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 3) wait_for(lambda : len(q2.get_global_rib()) == 3) @scenario(19) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) if path['nlri']['prefix'] == '192.168.110.0/24': env.assertTrue(community_exists(path, '65100:20')) if path['nlri']['prefix'] == '192.168.120.0/24': env.assertTrue(community_exists(path, '65100:30')) adj_out = g1.get_adj_rib_out(q2) for path in adj_out: env.assertFalse(community_exists(path, '65100:10')) if path['nlri']['prefix'] == '192.168.110.0/24': env.assertFalse(community_exists(path, '65100:20')) if path['nlri']['prefix'] == '192.168.120.0/24': env.assertTrue(community_exists(path, '65100:30')) """ No.20 community null action import-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=null)-> q2 | apply action | ------------------------------- """ @scenario(20) def boot(env): scenarios[1]['boot'](env) @scenario(20) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'REPLACE', 'SetCommunityMethod': {'Communities': []}}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10']) e1.add_route('192.168.110.0/24', community=['65100:10', '65100:20']) e1.add_route('192.168.120.0/24', community=['65100:10', '65100:30']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(20) def check(env): scenarios[19]['check'](env) @scenario(20) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) if path['nlri']['prefix'] == '192.168.110.0/24': env.assertTrue(community_exists(path, '65100:20')) if path['nlri']['prefix'] == '192.168.120.0/24': env.assertTrue(community_exists(path, '65100:30')) adj_out = g1.get_adj_rib_out(q2) for path in adj_out: env.assertFalse(community_exists(path, '65100:10')) if path['nlri']['prefix'] == '192.168.110.0/24': env.assertFalse(community_exists(path, '65100:20')) if path['nlri']['prefix'] == '192.168.120.0/24': env.assertFalse(community_exists(path, '65100:30')) """ No.21 community add action export-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=null)-> q2 | apply action | ------------------------------- """ @scenario(21) def boot(env): scenarios[1]['boot'](env) @scenario(21) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'ADD', 'SetCommunityMethod': {'Communities': ['65100:20']}}}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(21) def check(env): scenarios[17]['check'](env) @scenario(21) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) local_rib = g1.get_local_rib(q2) for path in local_rib[0]['paths']: env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) adj_out = g1.get_adj_rib_out(q2) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) """ No.22 community replace action export-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=65100:20)-> q2 | apply action | ------------------------------- """ @scenario(22) def boot(env): scenarios[1]['boot'](env) @scenario(22) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'REPLACE', 'SetCommunityMethod': {'Communities': ['65100:20']}}}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(22) def check(env): scenarios[17]['check'](env) @scenario(22) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) local_rib = g1.get_local_rib(q2) for path in local_rib[0]['paths']: env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) adj_out = g1.get_adj_rib_out(q2) for path in adj_out: env.assertFalse(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) """ No.23 community replace action export-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=null)-> q2 | apply action | ------------------------------- """ @scenario(23) def boot(env): scenarios[1]['boot'](env) @scenario(23) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'REMOVE', 'SetCommunityMethod': {'Communities': ['65100:20', '65100:30']}}}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10', '65100:20', '65100:30']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(23) def check(env): scenarios[17]['check'](env) @scenario(23) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) env.assertTrue(community_exists(path, '65100:30')) local_rib = g1.get_local_rib(q2) for path in local_rib[0]['paths']: env.assertTrue(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) env.assertTrue(community_exists(path, '65100:30')) adj_out = g1.get_adj_rib_out(q2) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) env.assertFalse(community_exists(path, '65100:30')) """ No.24 community null action export-policy test ------------------------------- e1 ->(community=65100:10)-> | -> q1-rib -> q1-adj-rib-out | ->(community=65100:10)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(community=null)-> q2 | apply action | ------------------------------- """ @scenario(24) def boot(env): scenarios[1]['boot'](env) @scenario(24) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'REPLACE', 'SetCommunityMethod': {'Communities': []}}}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', community=['65100:10', '65100:20', '65100:30']) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(24) def check(env): scenarios[17]['check'](env) @scenario(24) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) for path in adj_out: env.assertTrue(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) env.assertTrue(community_exists(path, '65100:30')) local_rib = g1.get_local_rib(q2) for path in local_rib[0]['paths']: env.assertTrue(community_exists(path, '65100:10')) env.assertTrue(community_exists(path, '65100:20')) env.assertTrue(community_exists(path, '65100:30')) adj_out = g1.get_adj_rib_out(q2) for path in adj_out: env.assertFalse(community_exists(path, '65100:10')) env.assertFalse(community_exists(path, '65100:20')) env.assertFalse(community_exists(path, '65100:30')) """ No.25 med replace action import-policy test ------------------------------- e1 ->(med=300)-> | -> q1-rib -> q1-adj-rib-out | ->(med=300)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(med=100)-> q2 | apply action | ------------------------------- """ @scenario(25) def boot(env): scenarios[1]['boot'](env) @scenario(25) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '100'}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', med=300) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) def metric(path): for a in path['attrs']: if 'metric' in a: return a['metric'] return -1 @scenario(25) def check(env): scenarios[17]['check'](env) @scenario(25) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) env.assertTrue(metric(adj_out[0]) == 300) local_rib = g1.get_local_rib(q2) env.assertTrue(metric(local_rib[0]['paths'][0]) == 100) adj_out = g1.get_adj_rib_out(q2) env.assertTrue(metric(adj_out[0]) == 100) """ No.26 med add action import-policy test ------------------------------- e1 ->(med=300)-> | -> q1-rib -> q1-adj-rib-out | ->(med=300)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(med=300+100)-> q2 | apply action | ------------------------------- """ @scenario(26) def boot(env): scenarios[1]['boot'](env) @scenario(26) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '+100'}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', med=300) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(26) def check(env): scenarios[17]['check'](env) @scenario(26) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) env.assertTrue(metric(adj_out[0]) == 300) local_rib = g1.get_local_rib(q2) env.assertTrue(metric(local_rib[0]['paths'][0]) == 400) adj_out = g1.get_adj_rib_out(q2) env.assertTrue(metric(adj_out[0]) == 400) """ No.27 med subtract action import-policy test ------------------------------- e1 ->(med=300)-> | -> q1-rib -> q1-adj-rib-out | ->(med=300)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(med=300-100)-> q2 | apply action | ------------------------------- """ @scenario(27) def boot(env): scenarios[1]['boot'](env) @scenario(27) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '-100'}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', med=300) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(27) def check(env): scenarios[17]['check'](env) @scenario(27) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) env.assertTrue(metric(adj_out[0]) == 300) local_rib = g1.get_local_rib(q2) env.assertTrue(metric(local_rib[0]['paths'][0]) == 200) adj_out = g1.get_adj_rib_out(q2) env.assertTrue(metric(adj_out[0]) == 200) """ No.28 med replace action export-policy test ------------------------------- e1 ->(med=300)-> | -> q1-rib -> q1-adj-rib-out | ->(med=300)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(med=100)-> q2 | apply action | ------------------------------- """ @scenario(28) def boot(env): scenarios[1]['boot'](env) @scenario(28) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '100'}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', med=300) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(28) def check(env): scenarios[17]['check'](env) @scenario(28) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) env.assertTrue(metric(adj_out[0]) == 300) local_rib = g1.get_local_rib(q2) env.assertTrue(metric(local_rib[0]['paths'][0]) == 300) adj_out = g1.get_adj_rib_out(q2) env.assertTrue(metric(adj_out[0]) == 100) """ No.29 med add action export-policy test ------------------------------- e1 ->(med=300)-> | -> q1-rib -> q1-adj-rib-out | ->(med=300)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(med=300+100)-> q2 | apply action | ------------------------------- """ @scenario(29) def boot(env): scenarios[1]['boot'](env) @scenario(29) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '+100'}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', med=300) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(29) def check(env): scenarios[17]['check'](env) @scenario(29) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) env.assertTrue(metric(adj_out[0]) == 300) local_rib = g1.get_local_rib(q2) env.assertTrue(metric(local_rib[0]['paths'][0]) == 300) adj_out = g1.get_adj_rib_out(q2) env.assertTrue(metric(adj_out[0]) == 400) """ No.30 med subtract action export-policy test ------------------------------- e1 ->(med=300)-> | -> q1-rib -> q1-adj-rib-out | ->(med=300)-> q1 | | | -> q2-rib -> q2-adj-rib-out | ->(med=300-100)-> q2 | apply action | ------------------------------- """ @scenario(30) def boot(env): scenarios[1]['boot'](env) @scenario(30) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 st0 = {'Name': 'st0', 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '-100'}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.100.0/24', med=300) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(30) def check(env): scenarios[17]['check'](env) @scenario(30) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 adj_out = g1.get_adj_rib_out(q1) env.assertTrue(metric(adj_out[0]) == 300) local_rib = g1.get_local_rib(q2) env.assertTrue(metric(local_rib[0]['paths'][0]) == 300) adj_out = g1.get_adj_rib_out(q2) env.assertTrue(metric(adj_out[0]) == 200) """ No.31 in-policy reject test ---------------- e1 ->r1(community=65100:10) -> x | -> q1-rib -> | -> r2 --> q1 r2(192.168.10.0/24) -> o | | | -> q2-rib -> | -> r2 --> q2 ---------------- """ @scenario(31) def boot(env): scenarios[1]['boot'](env) @scenario(31) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0]} g1.add_policy(policy, e1) e1.add_route('192.168.100.0/24', community=['65100:10']) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(31) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_adj_rib_in(e1)) == 2) wait_for(lambda : len(g1.get_local_rib(q1)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 1) wait_for(lambda : len(q1.get_global_rib()) == 1) wait_for(lambda : len(g1.get_local_rib(q2)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) """ No.32 in-policy accept test ---------------- e1 ->r1(community=65100:10) -> x | -> q1-rib -> | -> r2 --> q1 r2(192.168.10.0/24) -> o | | | -> q2-rib -> | -> r2 --> q2 ---------------- """ @scenario(32) def boot(env): scenarios[1]['boot'](env) @scenario(32) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions':{'RouteDisposition': {'AcceptRoute': True}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0], 'default': 'reject'} g1.add_policy(policy, e1) e1.add_route('192.168.100.0/24', community=['65100:10']) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(32) def check(env): scenarios[31]['check'](env) """ No.33 in-policy set community action ---------------- e1 ->r1(community=65100:10) -> o | -> q1-rib -> | -> r1(community=65100:10, 65100:20), r2 --> q1 r2(192.168.10.0/24) -> o | | | -> q2-rib -> | -> r1(community=65100:10, 65100:20), r2 --> q2 ---------------- """ @scenario(33) def boot(env): scenarios[1]['boot'](env) @scenario(33) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetCommunity': {'Options': 'ADD', 'SetCommunityMethod': {'Communities': ['65100:20']}}}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0]} g1.add_policy(policy, e1) e1.add_route('192.168.100.0/24', community=['65100:10']) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(33) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_adj_rib_in(e1)) == 2) wait_for(lambda : len(g1.get_local_rib(q1)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 2) wait_for(lambda : len(q1.get_global_rib()) == 2) wait_for(lambda : len(g1.get_local_rib(q2)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 2) wait_for(lambda : len(q2.get_global_rib()) == 2) @scenario(33) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 for q in [q1, q2]: adj_out = g1.get_adj_rib_out(q, prefix='192.168.100.0/24') env.assertTrue(len(adj_out) == 1) env.assertTrue(community_exists(adj_out[0], '65100:10')) env.assertTrue(community_exists(adj_out[0], '65100:20')) adj_out = g1.get_adj_rib_out(q, prefix='192.168.10.0/24') env.assertTrue(len(adj_out) == 1) env.assertFalse(community_exists(adj_out[0], '65100:10')) env.assertFalse(community_exists(adj_out[0], '65100:20')) """ No.34 in-policy med add action ----------------- e1 -> r1(med=300) -> o | -> q1-rib -> | -> r1(med=400), r2 --> q1 r2(192.168.10.0/24) -> o | | | -> q2-rib -> | -> r1(med=400), r2 --> q2 ----------------- """ @scenario(34) def boot(env): scenarios[1]['boot'](env) @scenario(34) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 cs0 = {'CommunitySets': {'CommunitySetList': [{'CommunitySetName': 'cs0', 'CommunityList': [{'Community': '65100:10'}]}]}} g1.set_bgp_defined_set(cs0) st0 = {'Name': 'st0', 'Conditions':{'BgpConditions':{'MatchCommunitySet':{'CommunitySet': 'cs0'}}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetMed': '+100'}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0]} g1.add_policy(policy, e1) e1.add_route('192.168.100.0/24', community=['65100:10']) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(34) def check(env): scenarios[33]['check'](env) @scenario(34) def check2(env): g1 = env.g1 q1 = env.q1 q2 = env.q2 for q in [q1, q2]: adj_out = g1.get_adj_rib_out(q, prefix='192.168.100.0/24') env.assertTrue(len(adj_out) == 1) env.assertTrue(metric(adj_out[0]) == 100) adj_out = g1.get_adj_rib_out(q, prefix='192.168.10.0/24') env.assertTrue(len(adj_out) == 1) env.assertTrue(metric(adj_out[0]) == -1) """ No.35 in-policy update test r1:192.168.2.0 r2:192.168.20.0 r3:192.168.200.0 ------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> q1 | | | q2 | | ->(r1)-> rib ->(r1)-> adj-rib-out | ->(r1)-> q2 ------------------------------------- | update distribute policy | V ------------------------------------------- | q1 | e1 ->(r1,r2,r3)-> | ->(r1,r2)-> rib ->(r1,r2)-> adj-rib-out | ->(r1,r2)-> q1 | | | q2 | | ->(r1,r3)-> rib ->(r1,r3)-> adj-rib-out | ->(r1,r3)-> q2 ------------------------------------------- """ @scenario(35) def boot(env): scenarios[1]['boot'](env) @scenario(35) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} p1 = {'IpPrefix': '192.168.200.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0, p1]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0]} g1.add_policy(policy, e1) e1.add_route('192.168.2.0/24') e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(35) def check(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_adj_rib_in(e1)) == 3) wait_for(lambda : len(g1.get_local_rib(q1)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 1) wait_for(lambda : len(q1.get_global_rib()) == 1) wait_for(lambda : len(g1.get_local_rib(q2)) == 1) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 1) wait_for(lambda : len(q2.get_global_rib()) == 1) @scenario(35) def setup2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 g1.clear_policy() p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) n0 = {'Address': g1.peers[e1]['neigh_addr'].split('/')[0]} ns0 = {'NeighborSetName': 'ns0', 'NeighborInfoList': [n0]} g1.set_neighbor_set(ns0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}, 'MatchNeighborSet': {'NeighborSet': ns0['NeighborSetName']}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0]} g1.add_policy(policy, e1) g1.softreset(e1) @scenario(35) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 wait_for(lambda : len(g1.get_adj_rib_in(e1)) == 3) wait_for(lambda : len(g1.get_local_rib(q1)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q1)) == 2) wait_for(lambda : len(q1.get_global_rib()) == 2) wait_for(lambda : len(g1.get_local_rib(q2)) == 2) wait_for(lambda : len(g1.get_adj_rib_out(q2)) == 2) wait_for(lambda : len(q2.get_global_rib()) == 2) """ No.36 aspath prepend action import -------------------------------- e1 ->(aspath=[65001])-> | -> p1-rib -> p1-adj-rib-out | -> p1 | | | -> p2-rib -> p2-adj-rib-out | -> p2 | apply action | -------------------------------- """ @scenario(36) def boot(env): scenarios[1]['boot'](env) @scenario(36) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetAsPathPrepend': {'RepeatN': 5, 'As': "65005"}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(36) def check(env): scenarios[33]['check'](env) @scenario(36) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_adj_rib_out(q1, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_local_rib(q2, prefix='192.168.20.0/24')[0]['paths'][0] env.assertTrue(path['as_path'] == [65005]*5 + [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [65005]*5 + [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) """ No.37 aspath prepend action export -------------------------------- e1 ->(aspath=[65001])-> | -> p1-rib -> p1-adj-rib-out | -> p1 | | | -> p2-rib -> p2-adj-rib-out | -> p2 | apply action | -------------------------------- """ @scenario(37) def boot(env): scenarios[1]['boot'](env) @scenario(37) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetAsPathPrepend': {'RepeatN': 5, 'As': "65005"}}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(37) def check(env): scenarios[33]['check'](env) @scenario(37) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_adj_rib_out(q1, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_local_rib(q2, prefix='192.168.20.0/24')[0]['paths'][0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [65005]*5 + [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) """ No.38 aspath prepend action lastas import -------------------------------- e1 ->(aspath=[65001])-> | -> p1-rib -> p1-adj-rib-out | -> p1 | | | -> p2-rib -> p2-adj-rib-out | -> p2 | apply action | -------------------------------- """ @scenario(38) def boot(env): scenarios[1]['boot'](env) @scenario(38) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetAsPathPrepend': {'RepeatN': 5, 'As': "last-as"}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(38) def check(env): scenarios[33]['check'](env) @scenario(38) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_adj_rib_out(q1, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_local_rib(q2, prefix='192.168.20.0/24')[0]['paths'][0] env.assertTrue(path['as_path'] == [e1.asn]*5 + [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]*5 + [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) """ No.39 aspath prepend action lastas export -------------------------------- e1 ->(aspath=[65001])-> | -> p1-rib -> p1-adj-rib-out | -> p1 | | | -> p2-rib -> p2-adj-rib-out | -> p2 | apply action | -------------------------------- """ @scenario(39) def boot(env): scenarios[1]['boot'](env) @scenario(39) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.20.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = {'Name': 'st0', 'Conditions': {'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}}, 'Actions': {'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': {'SetAsPathPrepend': {'RepeatN': 5, 'As': "last-as"}}}} policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.20.0/24') e1.add_route('192.168.200.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(39) def check(env): scenarios[33]['check'](env) @scenario(39) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_adj_rib_out(q1, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_local_rib(q2, prefix='192.168.20.0/24')[0]['paths'][0] env.assertTrue(path['as_path'] == [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.20.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]*5 + [e1.asn]) path = g1.get_adj_rib_out(q2, prefix='192.168.200.0/24')[0] env.assertTrue(path['as_path'] == [e1.asn]) """ No.40 extended community origin condition import -------------------------------- e1 ->(extcommunity=origin:65001.65100:200)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(40) def boot(env): scenarios[1]['boot'](env) @scenario(40) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 es0 = {'ExtCommunitySets': {'ExtCommunitySetList': [{'ExtCommunitySetName': 'es0', 'ExtCommunityList': [{'ExtCommunity': 'SoO:65001.65100:200'}]}]}} g1.set_bgp_defined_set(es0) st0 = {'Name': 'st0', 'Conditions': {'BgpConditions':{'MatchExtCommunitySet':{'ExtCommunitySet': 'es0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.20.0/24', extendedcommunity='origin:{0}:200'.format((65001 << 16) + 65100)) e1.add_route('192.168.200.0/24', extendedcommunity='origin:{0}:100'.format((65001 << 16) + 65200)) for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(40) def check(env): scenarios[1]['check'](env) """ No.41 extended community origin condition import -------------------------------- e1 ->(extcommunity=target:65010:320)-> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | ->x q2-rib | -------------------------------- """ @scenario(41) def boot(env): scenarios[1]['boot'](env) @scenario(41) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 es0 = {'ExtCommunitySets': {'ExtCommunitySetList': [{'ExtCommunitySetName': 'es0', 'ExtCommunityList': [{'ExtCommunity': 'RT:6[0-9]+:3[0-9]+'}]}]}} g1.set_bgp_defined_set(es0) st0 = {'Name': 'st0', 'Conditions': {'BgpConditions':{'MatchExtCommunitySet':{'ExtCommunitySet': 'es0'}}}} policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.20.0/24', extendedcommunity='target:65010:320') e1.add_route('192.168.200.0/24', extendedcommunity='target:55000:320') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(41) def check(env): scenarios[1]['check'](env) """ No.42 prefix only condition accept in ----------------- e1 ->r1(192.168.100.0/24) -> o | -> q1-rib -> | -> r2 --> q1 r2(192.168.10.0/24) -> x | | | -> q2-rib -> | -> r2 --> q2 ----------------- """ @scenario(42) def boot(env): scenarios[1]['boot'](env) @scenario(42) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.10.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = {'Name': 'st0', 'Conditions': { 'MatchPrefixSet': {'PrefixSet': ps0['PrefixSetName']}}} policy = {'name': 'policy0', 'type': 'in', 'statements': [st0]} g1.add_policy(policy, e1) # this will be blocked e1.add_route('192.168.100.0/24') # this will pass e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(42) def check(env): scenarios[31]['check'](env) """ No.43 extended community add action import-policy test --------------------------------- e1 ->(extcommunity=none) ->| -> q1-rib -> q1-adj-rib-out | --> q1 | | | -> q2-rib -> q2-adj-rib-out | --> q2 | add ext-community | --------------------------------- """ @scenario(43) def boot(env): scenarios[1]['boot'](env) @scenario(43) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.10.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = { 'Name': 'st0', 'Conditions': { 'MatchPrefixSet': { 'PrefixSet': ps0['PrefixSetName'] } }, 'Actions': { 'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': { 'SetExtCommunity': { 'Options': 'ADD', 'SetExtCommunityMethod': { 'Communities': ['0:2:0xfd:0xe8:0:0:0:1'] } }, } } } policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(43) def check(env): scenarios[17]['check'](env) def ext_community_exists(path, extcomm): typ = extcomm.split(':')[0] value = ':'.join(extcomm.split(':')[1:]) for a in path['attrs']: if a['type'] == BGP_ATTR_TYPE_EXTENDED_COMMUNITIES: for c in a['value']: if typ == 'RT' and c['type'] == 0 and c['subtype'] == 2 and c['value'] == value: return True return False @scenario(43) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1)[0] env.assertFalse(ext_community_exists(path, 'RT:65000:1')) path = g1.get_adj_rib_out(q2)[0] env.assertTrue(ext_community_exists(path, 'RT:65000:1')) """ No.44 extended community add action import-policy test -------------------------------- e1 ->(extcommunity=RT:65000:1) -> | -> q1-rib -> q1-adj-rib-out | --> q1 | | | -> q2-rib -> q2-adj-rib-out | --> q2 | add ext-community | -------------------------------- """ @scenario(44) def boot(env): scenarios[1]['boot'](env) @scenario(44) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.10.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = { 'Name': 'st0', 'Conditions': { 'MatchPrefixSet': { 'PrefixSet': ps0['PrefixSetName'] } }, 'Actions': { 'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': { 'SetExtCommunity': { 'Options': 'ADD', 'SetExtCommunityMethod': { 'Communities': ['0:2:0xfe:0x4c:0:0:0:0x64'] } }, } } } policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.10.0/24', extendedcommunity='target:65000:1') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(44) def check(env): scenarios[17]['check'](env) @scenario(44) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1)[0] env.assertTrue(ext_community_exists(path, 'RT:65000:1')) env.assertFalse(ext_community_exists(path, 'RT:65100:100')) path = g1.get_local_rib(q2)[0]['paths'][0] env.assertTrue(ext_community_exists(path, 'RT:65000:1')) env.assertTrue(ext_community_exists(path, 'RT:65100:100')) path = g1.get_adj_rib_out(q2)[0] env.assertTrue(ext_community_exists(path, 'RT:65000:1')) env.assertTrue(ext_community_exists(path, 'RT:65100:100')) """ No.45 extended community add action multiple import-policy test --------------------------------------- exabgp ->(extcommunity=none) ->| -> peer1-rib -> peer1-adj-rib-out | --> peer1 | | | -> peer2-rib -> peer2-adj-rib-out | --> peer2 | add ext-community | --------------------------------------- """ @scenario(45) def boot(env): scenarios[1]['boot'](env) @scenario(45) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.10.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = { 'Name': 'st0', 'Conditions': { 'MatchPrefixSet': { 'PrefixSet': ps0['PrefixSetName'] } }, 'Actions': { 'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': { 'SetExtCommunity': { 'Options': 'ADD', 'SetExtCommunityMethod': { 'Communities': ['0:2:0xfe:0x4c:0:0:0:0x64', '0:2:0:0x64:0:0:0:0x64'] } }, } } } policy = {'name': 'policy0', 'type': 'import', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(45) def check(env): scenarios[17]['check'](env) @scenario(45) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1)[0] env.assertFalse(ext_community_exists(path, 'RT:65100:100')) env.assertFalse(ext_community_exists(path, 'RT:100:100')) path = g1.get_local_rib(q2)[0]['paths'][0] env.assertTrue(ext_community_exists(path, 'RT:65100:100')) env.assertTrue(ext_community_exists(path, 'RT:100:100')) path = g1.get_adj_rib_out(q2)[0] env.assertTrue(ext_community_exists(path, 'RT:65100:100')) env.assertTrue(ext_community_exists(path, 'RT:100:100')) """ No.46 extended comunity add action export-policy test ------------------------------------ e1 ->(extcommunity=none) ->| -> q1-rib -> q1-adj-rib-out | --> q1 | | | -> q2-rib -> q2-adj-rib-out | --> q2 | add ext-community | ------------------------------------ """ @scenario(46) def boot(env): scenarios[1]['boot'](env) @scenario(46) def setup(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 p0 = {'IpPrefix': '192.168.10.0/24'} ps0 = {'PrefixSetName': 'ps0', 'PrefixList': [p0]} g1.set_prefix_set(ps0) st0 = { 'Name': 'st0', 'Conditions': { 'MatchPrefixSet': { 'PrefixSet': ps0['PrefixSetName'] } }, 'Actions': { 'RouteDisposition': {'AcceptRoute': True}, 'BgpActions': { 'SetExtCommunity': { 'Options': 'ADD', 'SetExtCommunityMethod': { 'Communities': ['0:2:0xfd:0xe8:0:0:0:1'], } }, } } } policy = {'name': 'policy0', 'type': 'export', 'statements': [st0]} g1.add_policy(policy, q2) e1.add_route('192.168.10.0/24') for c in [e1, q1, q2]: g1.wait_for(BGP_FSM_ESTABLISHED, c) @scenario(46) def check(env): scenarios[17]['check'](env) @scenario(46) def check2(env): g1 = env.g1 e1 = env.e1 q1 = env.q1 q2 = env.q2 path = g1.get_adj_rib_out(q1)[0] env.assertFalse(ext_community_exists(path, 'RT:65000:1')) path = g1.get_local_rib(q2)[0]['paths'][0] env.assertFalse(ext_community_exists(path, 'RT:65000:1')) path = g1.get_adj_rib_out(q2)[0] env.assertTrue(ext_community_exists(path, 'RT:65000:1')) class GoBGPTestBase(unittest.TestCase): wait_per_retry = 5 retry_limit = 10 @classmethod def setUpClass(cls): idx = parser_option.test_index base.TEST_PREFIX = parser_option.test_prefix cls.parser_option = parser_option if idx not in scenarios: print 'invalid test-index. # of scenarios: {0}'.format(len(scenarios)) sys.exit(1) cls.boot = scenarios[idx]['boot'] cls.setup = scenarios[idx]['setup'] cls.check = scenarios[idx]['check'] cls.setup2 = scenarios[idx]['setup2'] if 'setup2' in scenarios[idx] else None cls.check2 = scenarios[idx]['check2'] if 'check2' in scenarios[idx] else None def test(self): self.boot() self.setup() self.check() if self.setup2: self.setup2() if self.check2: self.check2() if __name__ == '__main__': if os.geteuid() is not 0: print "you are not root." sys.exit(1) output = local("which docker 2>&1 > /dev/null ; echo $?", capture=True) if int(output) is not 0: print "docker not found" sys.exit(1) nose.main(argv=sys.argv, addplugins=[OptionParser()], defaultTest=sys.argv[0])