# BGP Monitoring Protocol

GoBGP supports [BGP Monitoring Protocol (RFC 7854)](https://tools.ietf.org/html/rfc7854), which provides a convenient interface for obtaining route views.

## Prerequisites

Assume you finished [Getting Started](https://github.com/osrg/gobgp/blob/master/docs/sources/getting-started.md).

## Contents
- [Configuration](#config)
- [Verification](#verify)

## <a name="config"> Configuration

Add `[bmp-servers]` session to enable BMP. 

```toml
[global.config]
  as = 64512
  router-id = "192.168.255.1"

[[bmp-servers]]
  [bmp-servers.config]
    address = "127.0.0.1"
    port=11019
```

The supported route monitoring policy types are:
- pre-policy (Default)
- post-policy
- both (Obsoleted)
- local-rib
- all

Enable post-policy support as follows:

```toml
[[bmp-servers]]
  [bmp-servers.config]
    address = "127.0.0.1"
    port=11019
    route-monitoring-policy = "post-policy"
```

Enable all policies support as follows:

```toml
[[bmp-servers]]
  [bmp-servers.config]
    address = "127.0.0.1"
    port=11019
    route-monitoring-policy = "all"
```

To enable BMP stats reports, specify the interval seconds to send statistics messages.
The default value is 0 and no statistics messages are sent.
Please note the range of this interval is 15 though 65535 seconds.

```toml
[[bmp-servers]]
  [bmp-servers.config]
    address = "127.0.0.1"
    port=11019
    statistics-timeout = 3600
```

## <a name="verify"> Verification

Let's check if BMP works with a bmp server. GoBGP also supports BMP server (currently, just shows received BMP messages in the json format).

```bash
$ go get github.com/osrg/gobgp/gobmpd
$ gobmpd
```

Once the BMP server accepts a connection from gobgpd, then you see
below on the BMP server side.

```bash
INFO[0013] Accepted a new connection from 127.0.0.1:33685
{"Header":{"Version":3,"Length":6,"Type":4},"PeerHeader":{"PeerType":0,"IsPostPolicy":false,"PeerDistinguisher":0,"PeerAddress":"","PeerAS":0,"PeerBGPID":"","Timestamp":0},"Body":{"Info":null}}
```

You also see below on the BGP server side:

```bash
{"level":"info","msg":"bmp server is connected, 127.0.0.1:11019","time":"2015-09-15T10:29:03+09:00"}
```