summaryrefslogtreecommitdiffhomepage
path: root/test
AgeCommit message (Collapse)Author
2018-01-19test/lib: Add YABGP containerIWASE Yusuke
Note: This implementation supposes the YABGP version 0.4.0. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-19test/lib/base: Delete FlowSpec routes with keywordIWASE Yusuke
Currently, in case of the FlowSpec routes, "prefix" value which stored on each container instance is just a keyword and not valid NLRI arguments for adding or deleting routes. So when deleting routes with "route" keyword, it is required to construct the NLRI arguments using "matchs" value. This patch enables to construct the valid NLIR arguments as "prefix" value when adding the FlowSpec routes and enables to delete the FlowSpec routes with "route" keyword. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09bgp_zebra_test: Fix ping reachability testsIWASE Yusuke
Currently, we test the ping reachability of Quagga(o1) -> GoBGP(g1) -> Quagga(q1) in this scenario test, but in this case, two Quagga routers belong to the connected networks of GoBGP router and ping will succeed without the BGP advertisements. Then, even if GoBGP failed to install the received routes to the Linux routeing table via Zebra daemon, this test case will pass. This patch fixes to test the reachability of Quagga(o1) -> GoBGP(g1) -> Quagga(q1) -> Quagga(o2) and makes the advertised routes required to be installed into the g1's routing table. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09test/lib/base: Fix typosIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09test/lib/{gobgp,quagga}: IPv6 forwarding in zebra.confIWASE Yusuke
With this patch, it is not required to enable IPv6 forwarding by using "sysctl" explicitly in Quagga or GoBGP(Zebra enabled) containers. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-01-09test/lib/base: Removes redundant routes from hostIWASE Yusuke
When creating a new Docker network (Linux Bridge), some routes to its subnet will be installed in to the container host's routing table. This routes enable containers to communicate each other through the container host's rouging table, then causes the unexpected success of scenario tests (e.g., ping between containers). This patch removes the unexpected routes from the container host and avoid this problem. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-12-28addpath_test: Wait for re-establishment with ExaBGPIWASE Yusuke
When adding or deleting routes in ExaBGPContainer, it is required to restart ExaBGPContainer with the current implementation. This patch fixes to wait for the re-establishment with ExaBGP and improves the stability of this test case. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-12-16use label for containers and networks in order to avoid colliding with othersImcom Jin
2017-12-07test: use the current PYTHONPATH in run_all_tests.shFUJITA Tomonori
On some environments, it's necessary to use the current PYTHONPATH to run python. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-11-27test/lib: Allow unconfigured peer-as for Unnumbered BGPSatoshi Fujimoto
For Unnumbered BGP, neighbor AS number isn't needed to be specified, so 'peer-as' should not be specified in the scenario test for Unnumbered BGP. However, currently 'peer-as' is always specified in test/lib/gobgp.py This commit solves this by not specifying `peer-as` if 'neighbor-interface' is configured. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07test: Add scenario test for BGP ConfederationSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07test/lib: Add bgp config structure for GoBGP/Quagga containersSatoshi Fujimoto
This commit introduces 'bgp_config' attribute for GoBGP/Quagga containers to configure complex settings. Adding to this, this commit enables to configure BGP confederation settings to GoBGP/Quagga conrainers. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07test/lib: Enhancement on Get Rib library on QuaggaSatoshi Fujimoto
For Quagga containers, currently, when we use get_global_rib() without specifying prefix, we cannot get AS_PATH and other attributes. And when we use get_global_rib() with prefix, we can get only one path even if there is multiple paths for a destination. This commit fixes these problems by refining test/lib/quagga.py. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-07travis: Update .travis.ymlIWASE Yusuke
For scenario_test, Python build environment is more suitable rather than Go build environment, because scenario_test is written in Python and the building source codes will be done on Docker containers. This patch fixes scenario_test to use Python build environment and reduces "sudo" executions in order to use interpreter of virtualenv. Note: On Travis-Ci, the Python interpreter of sudoer is older version, and when install packages with "sudo pip", InsecurePlatformWarning will be displayed. So it is better to use the newer interpreter of virtualenv. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-09-29test: Add Scenario tests for Revised Error HandlingSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-09-24test/lib/base: Reduce redundant build stepsIWASE Yusuke
Currently, the build steps of "go get" and removing the downloaded directory are not effective steps. For example, "go get" for downloading dependencies can be replaced with "dep ensure". Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-09-14test/lib/gobgp,quagga: Adopt to Debian 9 based osrg/quagga:v1.0IWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-09-14test/lib/gobgp: Add shared volume for QuaggaIWASE Yusuke
Currently, daemons of Quagga will fails to output their logs, because those daemons (quagga user) does not have the permission to access to the GoBGP config directory (owned by root user). This patch prepares the volume for quagga user and enables daemons of Quagga to output logs. With this patch, those logs will be output into "TEST_BASE_DIR/TEST_PREFIX/<CONTAINER_NAME>/quagga/" directory. (default: /tmp/gobgp/<CONTAINER_NAME>/quagga/") Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-08-04update travis-ci for depFUJITA Tomonori
libraries are installed into vendor directory so we can't build go code outside. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-07-30addpath_test: Test cases for routes from CLIIWASE Yusuke
This patch adds test cases for adding/deleting routes from GoBGP CLI. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-30addpath_test: Test cases for send add-pathsIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-30test/lib/gobgp: Get community/identifier via get_*_rib()IWASE Yusuke
This patch enables GoBGPContainer to get community and identifier for each route via get_global_rib() and get_local_rib() methods. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-30test/lib/gobgp: Add route with identifier and communityIWASE Yusuke
This patch enables GoBGPContainer to add routes with "identifier" and "community" via add_route() method. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-30test/lib/gobgp: Enable GoBGPContainer to del a routeIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-30test/lib/base: Avoid to del all routes without identifier specifiedIWASE Yusuke
Currently, del_route() with "identifier=None" deletes all routes even if some installed routes have the valid identifier. This patch fixes to delete only route which exactly matches against the given identifier. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-20addpath_test: Test cases with non add-path routerIWASE Yusuke
This patch adds the test cases for the mixed situation of add-path enabled routers and non add-path enabled routers and advertising and withdrawing routes in such situation. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-20test/lib/base/BGPContainer: Enable to delete routeIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-20addpath_test: Enable to run without root privilegeIWASE Yusuke
see the comment of 4d7e3bd16fa51f4469a0a3f5f807c20b237ee21d Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-07-05test: add addpath_test.pyISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-06-08test: Test for Graceful Restart with multiple peersSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-06-07test: ignore the failure of caching dependeny with building docker imageFUJITA Tomonori
`go get -d github.com/osrg/gobgp/...` could fail (e.g., an imported library has gone). After that, we build a docker image from modified source code. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-05-23flowspec: handling of >2 logical elements and fixed testDenis Shevchenko
2017-05-10*: support replace-peer-as (aka as-override)Wataru Ishida
we use the term replace-peer-as instead of as-override since openconfig is using it. cli ``` $ gobgp n add <neighbor-addr> as <asn> replace-peer-as ``` config ``` neighbor: config: peer-as: <asn> neighbor-address: <neighbor-addr> as-path-options: config: replace-peer-as: true ``` Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2017-05-10*: support remove private asWataru Ishida
cli ``` $ gobgp n add <neighbor-addr> as <asn> remove-private-as (all|replace) ``` config ``` neighbor: config: peer-as: <asn> neighbor-address: <neighbor-addr> remove-private-as: all ``` Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2017-05-09server: ignore routes when local AS is in AS_PATHISHIDA Wataru
RFC4271 9.1.2 Phase 2: Route Selection If the AS_PATH attribute of a BGP route contains an AS loop, the BGP route should be excluded from the Phase 2 decision function. AS loop detection is done by scanning the full AS path (as specified in the AS_PATH attribute), and checking that the autonomous system number of the local system does not appear in the AS path. Operations of a BGP speaker that is configured to accept routes with its own autonomous system number in the AS path are outside the scope of this document. Also this commit adds support for allow-own-as option to relax this. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-04-21test: fix container build for testFUJITA Tomonori
fix the regression of commit e429c1aaf4dd85459dfafc1a5efac9d4778370f6 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-18test: change Dockerfile for faster container buildFUJITA Tomonori
use cache wisely. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-18Revert "test/lib/gobgp: Use local GoBGP executables in contaier"FUJITA Tomonori
This reverts commit 47ab84e34caeb7c89b26271bf84959011bc8ed19. using the same binaries on a host and inside a container isn't always feasible (by default, not statically linked binary). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-18test: remove unnecessary root check in bgp_unnumbered_test.pyFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-17scenario_test/README: Update commands to clean upIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-17scenario_test/README: Remove list for each test fileIWASE Yusuke
For the maintainability, this patch removes the list for each scenario test file. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-17test/lib/gobgp: Use local GoBGP executables in contaierIWASE Yusuke
Currently, to reflect the modification of the local source code or to switch the base image for GoBGP container, it is required to re-build the GoBGP container image, and this take a long time to test or debug with the scenario tests. This patch fixes to use the local GoBGP executables (gobgp and gobgpd) in container, and enables to reflect the changes without rebuidling container image. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-17scenario_test/README: Remove redundant brake tagIWASE Yusuke
Also adds the language type of code blocks. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-17scenario_test/README: Update list of required imagesIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-04test: add test for unnumbered bgp featureISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-03-17scenario_test: Test for NextHop Tracking with ZebraIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-03-17scenario_test: Support OSPFd in Quagga containerIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-03-17scenario_test: Enable to start OSPFd in GoBGP containerIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-03-16test/lib/quagga: Avoid ambiguous command "en"IWASE Yusuke
With the newer version of Quagga, "en" command will be regarded as an "Ambiguous command", because there are two commands "enable" and "end". This patch replaces "en" command with "enable" command, and fixes this problem. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-03-16test/lib: Enable to disply name of config fileIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:33:02 +0000