summaryrefslogtreecommitdiffhomepage
path: root/table/destination.go
AgeCommit message (Collapse)Author
2018-06-05config: Accept CLUSTER_ID as an integer valueIWASE Yusuke
Currently, only IPv4 address is acceptable for the CLUSTER_ID setting, this patch enables to specify the CLUSTER_ID as a 32-bit unsigned integer. With this expansion, "Config.RouteReflectorClusterId" stores the raw configured value for the CLUSTER_ID and "State.RouteReflectorClusterId" stores the value used for construct the CLUSTER_LIST attribute. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-24fix withdraw with addpath and rtc enabledFUJITA Tomonori
Needs withdrawn paths that includes attributes. The attributes are necessary because they are used with rtc table to check if the paths were sent. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-23zclient: Avoid flapping of nexthop reachabilityIWASE Yusuke
Currently, GoBGP sends the ROUTE_DELETE messages to Zebra for the paths whose nexthop was determined as unreachable by IGP, but when Zebra received the ROUTE_DELETE messages for the unreachable nexthop, Zebra will send the NEXTHOP_UPDATE message with the given nexthop is reachable via the default interface. This message unexpectedly causes updates of the unreachable path to be reachable (not true though). Then GoBGP will send ROUTE_ADD messages to Zebra, but those paths soon will be invalidated via the NEXTHOP_UPDATE message, GoBGP will send the ROUTE_DELETE messages and ... (infinite loop). This patch fixes to avoid sending the ROUTE_DELETE messages for the unreachable paths because those paths are inactivated on Zebra and not installed to FIB. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-10make Path objects in rib read-onlyFUJITA Tomonori
Now you can read Path objects in rib safely. Nobody modifies them. GetRib() API doesn't need to clone the objects. With full routes, this avoid allocating temporary huge memory. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove Radixkey member in Destination structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove withdraw/newPath/oldPath Lists in DestinationFUJITA Tomonori
Shrink memory usage. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07preparation for shrinking Destination structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07use sorted single master table for route server setupFUJITA Tomonori
https://github.com/osrg/gobgp/issues/1249 The IN policy was removed. The modification by the IMPORT policy are visible to all route server peers. This saves some dozens bytes memory per a path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-04-03packet/bgp: Getter functions for AS segmentIWASE Yusuke
This patch adds getter functions for the segment type and AS list of each segment without using type assertion. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-13packet/bgp: Remove raw binary field on PathAttributeIWASE Yusuke
The current implementation, PathAttribute stores the raw binary data as "Value" field, but this field increases the memory consumption. This patch removes "Value" field to slim down. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-08config: Option to disable best path selectionIWASE Yusuke
Note: When this option is specified, no path will be redistributed to any peer, because there is no best path. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-06table: Change type of BestPathReason to uint8IWASE Yusuke
The current type is string, which size is multiple of byte(=uint8). Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-11-07*: Support BGP Confederations (RFC 5065)Satoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-11-01Fix some typos found by spell checkerIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-10-03table: Implement ignore-as-path-lengthIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-08-02table: allocate bitmap for path id dynamicallyFUJITA Tomonori
allocating 256 bytes per prefix isn't a good idea. Let's allocate 8 bytes by default and expand dynamically if necessary. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-07-27table: disable wrong warning about aspathFUJITA Tomonori
With addpath support, two paths from API without AS_PATH attribute could be compared. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-07-26fix addpath send withdrawFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-07-26add addpath send supportFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-07-26table: assign local identifier to pathFUJITA Tomonori
The local identifier for path is sent to remote peers. To simplify the implementation, 1) the local identifier is unique per prefix not peer. 2) always assign the local identifier even without addpath-rx-capable peer. In the future, we might need to improve 2) to avoid the unnecessary overhead. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-07-04support addpath recvISHIDA Wataru
2017-07-04use Destination instead of Path for path selection APIFUJITA Tomonori
With Destination struct, multiple Paths can be moved from the table package to the server package in a cleaner way; for features such as add-path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-06-16config: Use State to get NeighborAddress instead of ConfigSatoshi Fujimoto
By introducing dynamic neighbor feature, GoBGP can have dynamic neighbors, and corresponding Config.NeighboAddress can be empty. This patch sets State.NeighborAddress for all neighbors, and gets the neighbor's address from them. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-06-07replace github.com/Sirupsen/logrus with github.com/sirupsen/logrusFUJITA Tomonori
The usage of "github.com/sirupsen/logrus" is recommended. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-05-31table: reduce allocs in NewDestinationChris Stockton
In NewDestination we add additional path to AddrToRadixkey to check the concrete type of nlri.
2017-05-23table: avoid unnecessary memory allocation about generating radix keyFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-27table: avoid cloning path for withdrawFUJITA Tomonori
when a peer having lots of routes goes down, the cloning paths consume too much memory. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-04server: fix bug of wrongly set <nil> to PeerInfo.LocalAddressISHIDA Wataru
config.TransportState.LocalAddress may have zone info with ipv6 address like "fe80::x%eth0". In this case, net.ParseIP() returns <nil>, which leads to set <nil> to PeerInfo.LocalAddress. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-03-06table: Evaluate best path based on nexthop reachabilityIWASE Yusuke
For BGP Nexthop Tracking, this patch enables table package to evaluate the best path based on the nexthop reachability which validated by IGB. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-02-15server: add a current option to WatchBestPath()ISHIDA Wataru
also, use it for zebra integration Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-11-29zebra: add flags for recursive nexthop lookup if necessaryWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-12table: use old best path instead of withdrawn pathsFUJITA Tomonori
Preparation for removing in-memory adj-out. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-11-04support neighbor belongs to VRFWataru Ishida
$ gobgp vrf add red rd 100:100 rt both 100:100 $ gobgp neighbor add 10.0.0.1 as 2 vrf red $ gobgp vrf red neighbor Peer AS Up/Down State |#Advertised Received Accepted 10.0.0.1 2 never Active | 0 0 0 Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-10-09*: support long lived graceful restartWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-09-13cli/table: support filtering of IPv4/IPv6 MPLS routesWataru Ishida
close #1086 Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-25table: add Best/MultiPath option to SelectOptionWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-25api/cli: kill cmd package custom path/destination structsWataru Ishida
reuse table package Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-25server/api: fix GetRib API to return sorted destinationWataru Ishida
the feature has been broken. Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-21fixed some misspell errorPeng Xiao
Signed-off-by: Peng Xiao <xiaoquwl@gmail.com>
2016-07-31gobgp: support mrt injecting only best pathsFUJITA Tomonori
$ gobgp mrt inject global --only-best your-mrt-dump-file Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-30all logging is done with log.WithFieldsdsp
Signed-off-by: dsp <dsp@2f30.org> Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-20move gRPC-related code in path.go and destination.go to grpc_server.goFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-06-06server/table: support bgp multipathISHIDA Wataru
This patch adds multiPathList field to watcherEventBestPathMsg and fills it when global.use-multiple-paths.config.enable = true Following patches add support injecting multipath to zebra and monitoring it via gRPC Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-06-06table: return default value(100) when local-pref attr doesn't existISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-06-03table: fix leftmostAS() in compareByMEDFUJITA Tomonori
Needs the first AS in the AS_SEQUENCE is the same for multiple paths. Any preceding AS_CONFED_SEQUENCE is ignored. Also rename the function name to 'firstAS'. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-05-29Revert "table: fix to compare new best path with old best path"FUJITA Tomonori
This reverts commit 74c0527dda13032dabd5dd4b7034115827fd2a46. Fix this in a different way.
2016-05-29table: make clear function to sort pathsFUJITA Tomonori
We want to check out if two pointers are same or different here. Make the code clear. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-05-29table: fix to compare new best path with old best pathFUJITA Tomonori
The current code uses Path.Equal(), which just check out if pathes are idential. However, it doesn't work for two cloned pathes of a path (soft update in case). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-05-26policy: add support setting self ip address as next-hopISHIDA Wataru
from configuration file [policy-definitions.statements.actions.bgp-actions] set-next-hop = "self" from cli $ gobgp policy statement stmt1 add action next-hop self Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-23server/table: fix intra-AS RTC route distributionISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:20:58 +0000