summaryrefslogtreecommitdiffhomepage
path: root/server
AgeCommit message (Collapse)Author
2015-08-21server: fix rpki ipv6 address connectivityFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-21speed up showing ipv6 routesFUJITA Tomonori
same as ipv4. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-20server: fix for sorting adj-in/out routesFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-19rpki: fix deadlock bugFUJITA Tomonori
Same as commit 22b43f7ae7daf381520a529157be4c71c11c2bc8. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-19config file support rpki configurationFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-19server: fix LOCAL_RIB sends back sorted ipv4 routesFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-19gobgp: improve the time to show routesFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-19vrf: advertise route-target constraint routes when adding a vrfISHIDA Wataru
partial implementation of RFC4686 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-19table: fix best path selection which considers local asnISHIDA Wataru
TableManager.localAsn wasn't used. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-19table: withdraw self-generated vrfed routes when a vrf deletedISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-19server: fix grpc deadlockFUJITA Tomonori
When grpc client stops reading, gobgpd becomes in deadlock because gobgpd tries to write to grpc request's channel for a response but nobody reads from the channel. This patch fixes this issue. Another problem that this patch fixes is that grpc client reads slowly, gobgpd would sleep on grpc request's channel for a response. That should not happen. So instead grpc creates responses first, then run goroutine to write the responses to the client. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-18*: s/distribute/inISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-13api/cli: reuse api.Path in ModPathArgumentsISHIDA Wataru
kill redundant lines Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-12support rpki validationFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-12bgp/cli: support flowspec (RFC5575)ISHIDA Wataru
draft-ietf-idr-flowspec-redirect-rt-bis-05 is also implmented. TODO: draft-ietf-idr-flow-spec-v6-06 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-12server: fix typoISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-12server: add fsm state to debug messageISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-12server: store whole capabilities with the same cap codeISHIDA Wataru
multi protocol capability may appear several times. store all of them to show through gobgp cli command. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-12api: kill protobuf Addressfamily structISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-11config: rename distributed-policy to in-policyNaoto Hanaue
2015-08-09server: support adminDown'ed peer startupFUJITA Tomonori
The config file should be like: [Neighbors] [[Neighbors.NeighborList]] [Neighbors.NeighborList.NeighborConfig] PeerAs = 65001 NeighborAddress = "10.0.255.1" [Neighbors.NeighborList.NeighborState] AdminDown = true Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-08server: guard against nil pointer dereferenceISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-08*: kill protobuf path structureISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-08server: fix typoISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-08server: support vrfISHIDA Wataru
to add/delete vrf $ gobgp vrf [add|del] <vrf-name> rd <rd> rt [import|export|both] <rt>... show vrf $ gobgp vrf to add/delete a path to a specific vrf $ gobgp vrf <vrf-name> rib [add|del] <prefix> -a <address-family> show paths contained in a specific vrf $ gobgp vrf <vrf-name> rib -a <address-family> Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-08api: change arguments name from neighbor_address to nameISHIDA Wataru
planning to use this variable more generally (for vrf) Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-06server: support to send notification to all peers when shutdownFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-05server: fix commit mess upFUJITA Tomonori
route server config has changed. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-05fix policy dynamic updateFUJITA Tomonori
handle dynamic policy peer binding Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-05server/table: support mac mobilityISHIDA Wataru
RFC7432 15. MAC Mobility Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-05config: change the structure of Neighbor.RouteServer as the ↵Naoto Hanaue
Neighbor.RouteReflector
2015-08-05config: change the structure of AsPathSet, CommunitySet and ExtCommunitySet ↵Naoto Hanaue
as the PrefixSet
2015-08-04server: fix 'accepted' number in peerFUJITA Tomonori
TODO: we calculate the number every time a CLI request comes. we should store the number somewhere. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-03mrt: merge gomrt to gobgp cli commandISHIDA Wataru
Usage $ gobgp mrt inject global <filename> [<count>] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-03api: use serialized buffer rather than protobuf struct to add pathsISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-03mrt: support mrt rib dump of neighbor's local ribISHIDA Wataru
This feature can be used in route-server env. CLI syntax changed like below $ gobgp mrt dump rib global [<interval>] $ gobgp mrt dump rib neighbor <neighbor addr> [<interval>] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-03api: s/router_id/neighbor_addressISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-03server: fix bug of re-establishISHIDA Wataru
we must call filterpath() in case of re-establish. scenario_test is also added to check this. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-03server: fix bgp state transition raceFUJITA Tomonori
Make sure that all Go routines finishes before moving to another bgp state. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-31config: use the latest openconfig yangHiroshi Yokoi
2015-07-28server: fix one-shot mrt dumpFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-28add RPKI supportFUJITA Tomonori
Just get info from ROA server. Not varidate any route yet. Currently, "--rpki-server" option enables RPKI: $ gobgpd --rpki-server 210.173.170.254:323 We'll use the configuration file for this later. You can see ROAs via CLI: $ gobgp rpki For ipv6, $ gobgp rpki -a v6 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-27server: support ipv6 route zapiFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-26server: add zebra api support to configure linux network stackFUJITA Tomonori
Install route information to linux network stack via quagga's zebra. $ gobgpd --enable-zapi By default, 'unix:/var/run/quagga/zserv.api' for is used for zapi endpoint. It's not the case in your environment, use '--zapi-url' option. Note that only ipv4 support now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-26server: generize broadcastFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-23server: make mrt rpc request reliableFUJITA Tomonori
Currently, if a mrt request sender doesn't read from bgpd some time, a message could be dropped. Instead, this makes bgpd keep messages in memory until they are read. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-22server: make monitor rcp request reliableFUJITA Tomonori
Currently, if a monitor request sender doesn't read from bgpd some time, a message could be dropped. Instead, this makes bgpd keep messages in memory until they are read. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-07-22mrt: support mrt dumpISHIDA Wataru
$ gobgp mrt dump 10 -o ./dump Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-07-20server: enable buffering for grpc responseISHIDA Wataru
aimed at preventing drop of monitoring notification Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-07-15cli: support extended communityNaoto Hanaue
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 04:53:10 +0000