summaryrefslogtreecommitdiffhomepage
path: root/server
AgeCommit message (Collapse)Author
2018-07-06api: remove table/ usage in util.goFUJITA Tomonori
This is a part of work removing table/ usage in api/. api/ will depend on only protobuf stuff and packet/. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-06-29server: exclude RTC for softreset if not specifiedFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-06-27Fixing staticcheck errors from linux filesJeff Bean
2018-06-27server: Avoid calling os.Exit() in BgpServer.Shutdown()IWASE Yusuke
In case that GoBGP is used as Go native library, calling os.Exit() can cause unexpected termination including application which uses GoBGP. This patch removes calls of os.Exit() derived from BgpServer.Shutdown(). Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-06-23potential - Found a bug in the python testsJeff Bean
2018-06-23timeouts on tests and fixing timeout logic on graceful restart testJeff Bean
2018-06-22Fixing all megacheck errors.Jeff Bean
2018-06-20server: fix AddPath to return uuidFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-06-14simple staticcheck issuesJeff Bean
2018-06-13api: Implement AddCollector()Satoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-06-05server: fix GetRib() with rpkiFUJITA Tomonori
fix a bug that doesn't return validation results at all. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-06-05table: support nexthop match policyurban
2018-05-31server: reject route without origin attribute via AddPath()FUJITA Tomonori
We should do stricter validation. Probably, we should use packet/bgp/validate.go. close #1660 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-29zclient: Drop NextHop Tracking dampening featureIWASE Yusuke
The dampening feature was implemented to delay the update of nexthop states in order to avoid the states are "extremely" frequent updated. But with this implementation, if a path is withdrawn by peer or via API which the dampening feature delaying the update of that path, the withdrawn path can be restored unexpectedly again. And currently Quagga and FRRouting does not support the dampening, this path drops the dampening feature to avoid this problem. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-28table: update accepted number in adj-in rib after softreset-inFUJITA Tomonori
update accepted number in adj-in rib after AllowOwnAs has changed. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-28table: fix accepted number in adj-in ribFUJITA Tomonori
fix accepted number in adj-in rib when it has an as-looped path. adding another member to Path struct is pain. Should be fixed later. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-28table: remove unused id in AdjRib strctureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-28server: Apply rtfilter on eBGP sessionIWASE Yusuke
The outgoing Route Target Constraint filter should be applied to eBGP session, but currently applied to only iBGP session. This patch fixes to apply rtfilter on eBGP session. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-28server: Prefer RTC route from RR clientIWASE Yusuke
In case that a Route Reflector(RR) and a non RR client peering, peering of different RR clusters for example, the RR should send the RTC route from its client even if the RTC route from non RR client is better path based on the best path algorithm in order to notify that some RR clients are interested in the given Route Target. Currently, only source peer address is concerned, the RTC route from RR client can have lower priority than non RR client and it can not be advertised. This patch fixes to prefer the route from RR client when selecting the candidate to be advertised. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-26server: fix infinite rtc update loop with addpathFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-24server: Gather informations for BMPPeerDownMessageSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-05-24server/server: Add field to WatchEventPeerState for PeerDownEventSatoshi Fujimoto
To include the PeerDownReason and data in BMP messages, this commit adds some field to WatchEventPeerState. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-05-24server/server: Restart peers when capabilities are changedSatoshi Fujimoto
If capabilities are added or removed by updating peer configs, it is needed to resend Open Message contains the new capabilities. But currently, GoBGP does not resend Open Message for Add-Path and Graceful Restart capabilities. This commit fixes it to resend Open Message for them. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-05-24server: Withdraw routes when received RTM withdrawalIWASE Yusuke
Because the RTM is removed from adj-RIB-in before collecting the candidate routes to be withdrawn, the candidates are unexpectedly filtered before sending withdraw messages. Then on the peers, the VPN routes are left on. This patch fixes to selects candidates from the filtered paths and send withdraw messages as expected. Also resolves the TODO in "test/scenario_test/rtc_test.py". Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-24fix withdraw with addpath and rtc enabledFUJITA Tomonori
Needs withdrawn paths that includes attributes. The attributes are necessary because they are used with rtc table to check if the paths were sent. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-23zclient: Avoid flapping of nexthop reachabilityIWASE Yusuke
Currently, GoBGP sends the ROUTE_DELETE messages to Zebra for the paths whose nexthop was determined as unreachable by IGP, but when Zebra received the ROUTE_DELETE messages for the unreachable nexthop, Zebra will send the NEXTHOP_UPDATE message with the given nexthop is reachable via the default interface. This message unexpectedly causes updates of the unreachable path to be reachable (not true though). Then GoBGP will send ROUTE_ADD messages to Zebra, but those paths soon will be invalidated via the NEXTHOP_UPDATE message, GoBGP will send the ROUTE_DELETE messages and ... (infinite loop). This patch fixes to avoid sending the ROUTE_DELETE messages for the unreachable paths because those paths are inactivated on Zebra and not installed to FIB. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-23server: use negotiated family instead configuredFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-22fix graceful-restart when not all peers are restartingPatrick Hemmer
This fixes an issue where GoBGP would incorrectly defer sending routes to a peer on a graceful restart. RFC4724 states: > Once the session between the Restarting Speaker and the Receiving > Speaker is re-established, the Restarting Speaker will receive and > process BGP messages from its peers. However, it MUST defer route > selection for an address family until it either (a) receives the > End-of-RIB marker from all its peers (excluding the ones with the > "Restart State" bit set in the received capability and excluding the > ones that do not advertise the graceful restart capability) or (b) > the Selection_Deferral_Timer referred to below has expired. The scenario that this fixes is where you have 3 (or more) peers, and 2 of the peers ("A" and "B") perform a graceful restart at the same time, but the 3rd ("C") does not. If after restart peer C sends EOR to peer A before peer B reaches BGP_FSM_ESTABLISHED with peer A, it defers the route selection. However once peer B does reach BGP_FSM_ESTABLISHED, peer A still wouldn't send any updates to peer C until the deferral expired. This commit changes the behavior so that upon restart, once the peer receives EOR from all non-restarting peers and reaches BGP_FSM_ESTABLISHED for all restarting peers, the routes are sent to all peers.
2018-05-11fix add-path with vrf-neighborFUJITA Tomonori
close #1661 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-11mrt: Improve golint resultIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-11mrt: Enable to dump locally generated routesIWASE Yusuke
For reloading locally generated routes by using MRT dump file, this patch enables to include locally generated routes into TABLE_DUMPv2 records. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-05-10bmp: avoid huge memory allocation for sending paths initiallyFUJITA Tomonori
We had to serialize all the paths once because the paths could be modified later. Now they are immutable so we don't need. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-10make Path objects in rib read-onlyFUJITA Tomonori
Now you can read Path objects in rib safely. Nobody modifies them. GetRib() API doesn't need to clone the objects. With full routes, this avoid allocating temporary huge memory. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-09server/server: Fix typoSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-05-07table: use shorter key for map of ipv4 and ipv6 prefixesFUJITA Tomonori
save about 100MB memory. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove uuid member in originInfo structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove VrfIds member in Path structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07avoid updating Path in the rib via MarkStale()FUJITA Tomonori
A path object in the adj-in is also in the master rib. We can't update such. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove withdraw/newPath/oldPath Lists in DestinationFUJITA Tomonori
Shrink memory usage. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07preparation for shrinking Destination structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07use sorted single master table for route server setupFUJITA Tomonori
https://github.com/osrg/gobgp/issues/1249 The IN policy was removed. The modification by the IMPORT policy are visible to all route server peers. This saves some dozens bytes memory per a path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-04-18fsm: Don't wait EoR if the peer is restartingSatoshi Fujimoto
RFC4724(Graceful Restart) says that if "Restart State" bit is set in the Open message, its peer must not wait for the EoR marker from the speaker before advertising routing information to the speaker. But currently, GoBGP waits EoR even if "Restart State" bit is set in graceful restart process. This commit fixes it to skipping syncing process for the restarting peers. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-04-18server: Fix outgoing rtfilterIWASE Yusuke
Currently, the result of Route Target Constraint filter is unexpectedly ignored when Route Reflector reflecting the VPN routes because "ignore" flag can be overwritten without evaluated. This patch fixes to return "nil" before "ignore" flag overwritten and enable to filter outgoing VPN routes based on RTC. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-09server: Avoid infinite UPDATE loop of RTM NLRIIWASE Yusuke
When GoBGP dropped adj-Rib-out per Peer, we fixed to send the same Route Target Membership (RTM) NLRI even if it is already sent. This can cause the infinite UPDATE loop when Route Reflector(RR) reflects RTM NLRI to its clients. For example, the following situation causes the infinite UPDATE loop. Topology: +----- RR -----+ | | Client1 Client2 When Client1 has VRF with RT 65000:1 and sends a RTM NLRI to RR, then RR reflects the NLRI to Client2. If a new VRF with the same RT 65000:1 on Client2 is created, Client2 will notify it to RR, then RR calculates the best, but RR will send the NLRI from Client2 to Client1 even if it is not the best. Client1 receives the NLRI again, calculates the best and re-sends the best. Then, RR reflects the received NLRI ... (infinite loop). This patch fixes to compare the candidate path to be sent with the old path and assume the given candidate path was already sent before if the candidate path and the old path is the same path. Then avoids the infinite UPDATE loop. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-05server/rpki: fixed ROA sortAbhijit Gadgil
The typo in function Less() was causing logical error during comparison and the comparison would always return whether AS number was less or not regardless of Maxlen. fixes #1633
2018-04-03packet/bgp: Getter functions for AS segmentIWASE Yusuke
This patch adds getter functions for the segment type and AS list of each segment without using type assertion. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-03-27server/server: Set rsRib to RS client in adding dynamic neighborSatoshi Fujimoto
Currently, globalRib is always set to dynamic neighbors even if they are route server clients. This patch fixes to set rsRib when the neighbor is a route server client. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-03-22Fix AddPath MarshallingOption bug.kishiguro
When neighbor had AddPath capability, then disable AddPath after that. Old marshallingOptions remains. So once neighbor enabled AddPath it can't be disabled with no AddPath capability option in Open Message.
2018-02-23zclient: Avoid directly access to RIBIWASE Yusuke
In order to avoid races, zclient should not access to RIB without calling APIs of BgpServer. But currently zclient directly accesses to the global RIB when handling NEXTHO_UPDATE messages. This patch fixes this problem by calling BgpServer.GetRib(). Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-08config: Option to disable best path selectionIWASE Yusuke
Note: When this option is specified, no path will be redistributed to any peer, because there is no best path. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 04:26:05 +0000