summaryrefslogtreecommitdiffhomepage
path: root/server/bmp.go
AgeCommit message (Collapse)Author
2017-06-07replace github.com/Sirupsen/logrus with github.com/sirupsen/logrusFUJITA Tomonori
The usage of "github.com/sirupsen/logrus" is recommended. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-06-03bmp: Enable to send BMP Route Mirroring messagesIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-23bmp: Implement Information TLV on Termination messagesIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-23bmp: Implement Information TLV on Initiation messageIWASE Yusuke
Currently, the TLV fields are implemented as BMPTLV on the Initiation messages, but not enough decoded and required to be constructed in binary format. This patch introduces BMPInfoTLV and makes easy to handle the TLV fields. Note: This patch obsoletes BMPTLV structure. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-22bmp: Stats reports for Adj-RIBs-In and Loc-RIB routesIWASE Yusuke
This patch enable to send BMP statistics reports for the following types; - Stat Type = 7: Number of routes in Adj-RIBs-In = Regarding number of "accepted" routes in AdjTable state - Stat Type = 8: Number of routes in Loc-RIB = Regarding number of "advertised" and "filtered" routes in AdjTable state which means the all routes selected by the local BGP speaker's Decision Process. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-22bmp: Obsolete "both" option for route-monitoring-policyIWASE Yusuke
Because of the introduction of "local-rib" and "all" options for route-monitoring-policy, this patch obsoletes "both" option. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-22bmp: Fix peer header info in Loc-RIB route messageIWASE Yusuke
"draft-evens-grow-bmp-local-rib" says the peer header for Loc-RIB monitoring should include the following values; - Peer Address: Zero-filled as remote peer address is not applicable. - Peer AS: Set to the BGP instance global or default ASN value. - Peer BGP ID: Set to the BGP instance global or RD (e.g. VRF) specific router-id. This patch fixes the peer header construction to follow this specification. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-22bmp: Enable to specify all route monitoring policiesIWASE Yusuke
This patch adds the new key "all" for specifying the all BMP route monitoring policies. Configuration Example: [[bmp-servers]] [bmp-servers.config] address = "127.0.0.1" port=11019 route-monitoring-policy = "all" Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-17bmp: BMP Route Monitoring for Local RIB routesIWASE Yusuke
This patch enable to send BMP Route Monitoring message for Local RIB routes described in bmp-draft-evens-grow-bmp-local-rib. Configuration Example: gobgpd.toml ... [[bmp-servers]] [bmp-servers.config] address = "127.0.0.1" port=11019 route-monitoring-policy = "local-rib" ... Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-04-17packet/bmp: Obsolete policy argument for BMPPeerHeaderIWASE Yusuke
According to "draft-evens-grow-bmp-local-rib", the L flag in the Peer Flags is NOT used for the locally sourced routes and the F flag is defined into the same bit. This patch removes "policy" argument and add "flags" argument for BMPPeerHeader and NewBMPPeerHeader in order to distinguish which flag is set (the L flag or the F flag). Then introduce IsPostPolicy() func to show if the L flag is set or not. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2016-12-19bmp: don't send paths already sent in case of softresetin happensWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-07-30all logging is done with log.WithFieldsdsp
Signed-off-by: dsp <dsp@2f30.org> Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-26export Watch featureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-22bmp uses the new Watch APIFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-06-10server: remove restart() from watcher interfaceISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-04-12packet: create bmp packageFUJITA Tomonori
move bmp stuff from bgp to bmp package. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-03-31move packet/*.go to packet/bgp/*.go for Go's conventionFUJITA Tomonori
Later, we move non-bgp protocol stuff like mrt under their own direcotries. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-02-06bmp: try to reconnect after write failureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-02-06server: fix needless warnings about writing to dead bmp connectionFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-02-07server: remove broadcastBMPMsgISHIDA Wataru
not used Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-01-09api: support bmp configurationISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-01-09bmp: use watcher infra to implement bmp featureISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-01-09server: add REQ_BMP_NEIGHBORS api for internal bmp useISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-01-09config: refactor config structureISHIDA Wataru
- change config variable name to chaincase from camelcase - remove unnecessary wrapper structs which only contain one slice field Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-12-30bmp: detect bmp connection lost earlier and recover earlierISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-12-29config: use viper and support multiple configuration formatsISHIDA Wataru
// toml by default $ gobgpd -f gobgpd.toml // use -t to change configuration type $ gobgpd -t yaml -f gobgpd.yaml Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-12-28config: make config/state variable name simpleISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-12-16bmp: support post-policy routing monitoringFUJITA Tomonori
"RouteMonitoringPolicy" option added: 0: pre-policy (by default) 1: post-policy 2: both = [BmpServers] [[BmpServers.BmpServerList]] [BmpServers.BmpServerList.BmpServerConfig] Address = "127.0.0.1" Port = 11019 RouteMonitoringPolicy = 2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-11-13bmp: use on-wire original update dataFUJITA Tomonori
bgpd parse on-wire original update data to construct BGPMessage object and serialize it. Sometimes the both data is not idential. For example, the original data sets the extended length for attribute even if the length is less than 256. This commit fixes the above issue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-09-13Add bmp supportFUJITA Tomonori
Can be enabled like: [Global] [Global.GlobalConfig] As = 64512 RouterId = "10.0.255.254" [BmpServers] [[BmpServers.BmpServerList]] [BmpServers.BmpServerList.BmpServerConfig] Address = "127.0.0.1" Port=11019 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 08:57:48 +0000