summaryrefslogtreecommitdiffhomepage
path: root/docs
AgeCommit message (Collapse)Author
2017-06-05*: Support Peer-Group ConfigurationSatoshi Fujimoto
This patch enables to create peer-groups, also supports dynamic configuration to peer-groups. Manually set fields in neighbor configs have priority over its peer-group's config, except some fields, like "peer-as", or "minimum-advertisement-interval" and so on. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-06-03config: Option to enable BMP Route MirroringIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-23cli: Add User Interface for Redirect-IPv6 actionSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2017-05-22config: Add interval seconds for BMP stats reportsIWASE Yusuke
This patch suppose the default interval of the BMP stats reports is 0 which disable this feature and the range of this interval is 15 though 65535 seconds to follow Junos OS configuration. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-22bmp: Obsolete "both" option for route-monitoring-policyIWASE Yusuke
Because of the introduction of "local-rib" and "all" options for route-monitoring-policy, this patch obsoletes "both" option. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2017-05-10*: support replace-peer-as (aka as-override)Wataru Ishida
we use the term replace-peer-as instead of as-override since openconfig is using it. cli ``` $ gobgp n add <neighbor-addr> as <asn> replace-peer-as ``` config ``` neighbor: config: peer-as: <asn> neighbor-address: <neighbor-addr> as-path-options: config: replace-peer-as: true ``` Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2017-05-10*: support remove private asWataru Ishida
cli ``` $ gobgp n add <neighbor-addr> as <asn> remove-private-as (all|replace) ``` config ``` neighbor: config: peer-as: <asn> neighbor-address: <neighbor-addr> remove-private-as: all ``` Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2017-05-09server: ignore routes when local AS is in AS_PATHISHIDA Wataru
RFC4271 9.1.2 Phase 2: Route Selection If the AS_PATH attribute of a BGP route contains an AS loop, the BGP route should be excluded from the Phase 2 decision function. AS loop detection is done by scanning the full AS path (as specified in the AS_PATH attribute), and checking that the autonomous system number of the local system does not appear in the AS path. Operations of a BGP speaker that is configured to accept routes with its own autonomous system number in the AS path are outside the scope of this document. Also this commit adds support for allow-own-as option to relax this. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-04-26doc: update required go versions to 1.7 or laterFUJITA Tomonori
[skip ci] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-04-21Update getting-started.mdDaniel Portella
2017-04-21Update unnumbered-bgp.mdDaniel Portella
2017-04-21Update graceful-restart.mdDaniel Portella
2017-04-04docs: add doc for unnumberd BGPISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-03-05doc: improve bmp documentationMark Strother
Add documentation for route-monitoring-policy = "both".
2017-03-02flowspec: comply with new draft RFC5575bis normalized operatorsMatthieu Texier
2017-02-24doc: update policyFUJITA Tomonori
add note that prefix-set has either v4 or v6. [skip ci] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2017-02-17flowspec: comply with RFC 5575 about TCP flags rulesMatthieu Texier
This patch proposes a new way to configure BGP flowspec TCP flags rules It allows to comply with RFC 5575 by defining flags like this =SA =A / '!SA' / '=SA&=!U' = means match, ! means not, & means and, all TCP flags are identified by their first charater S for SYN A for Ack ...
2017-02-17Document support for post-policy BMP flowsMark Strother
2017-02-15cli: add current option to monitor commandsISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2017-01-15fix configuration examples with correct route-disposition policy syntaxtamihiro
2016-11-17config: simplify route-disposition configurationWataru Ishida
before: ```yaml actions: route-disposition: accept-route: true reject-route: false ``` after ```yaml action: router-disposition: accept-route ``` Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-13fix a few typosRuben Kerkhof
2016-11-12ops: drop open switch supportWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-04docs: update cli docWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-03allow add local route with specific mpls labelFUJITA Tomonori
Also don't allocate label for local routes. The label management needs to work with other components rather than bgp. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-10-16cli/api: support getting table summary informationWataru Ishida
$ gobgp global rib summary -a ipv4 $ gobgp neighbor 10.0.0.1 local summary $ gobgp neighbor 10.0.0.1 adj-in summary $ gobgp neighbor 10.0.0.1 adj-out summary Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-10-10policy: support large-community match/actionWataru Ishida
close #1133 Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-10-09*: support long lived graceful restartWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-10-08docs: add cli example to add route with blackhole communityFUJITA Tomonori
[ci skip] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-09-16docs: add a reference to route server RFCWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-09-14bgp/cli: Support Large CommunityWataru Ishida
see https://tools.ietf.org/html/draft-heitz-idr-large-community-04 Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-17docs: add a route-type condition exampleISHIDA Wataru
[ci skip] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-17policy: support route-type conditionISHIDA Wataru
// match with routes locally generated $ gobgp policy statement s0 add condition route-type local // match with routes received from eBGP peers $ gobgp policy statement s0 add condition route-type external // match with routes received from iBGP peers $ gobgp policy statement s0 add condition route-type internal Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-16cli: support setting flowspec "procotol" in octetISHIDA Wataru
$ gobgp global rib -a ipv4-flowspec add match protocol 100 then discard close #1052 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-15mrt: support per-peer table dump with route server configurationFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-14support mrt table dump (TABLE_DUMPv2 format)FUJITA Tomonori
Only global rib dumping is supported for now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-29server: move default config setting logic inside BgpServer's methodsISHIDA Wataru
We have three ways to configure gobgp. config file, grpc api and native lib. Every methods eventually call (*server.BgpServer).Start() or (*server.BgpServer).AddNeighbor() when starting bgp server or adding neighbors. This commit moves default config setting logic inside them to remove redundant code in grpc_server.go and simplify the usage of native lib. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29config: curve out code specific to default global config settingISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29config: curve out code specific to default neighbor config settingISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29move grpc_server.go from server/ to api/FUJITA Tomonori
Now all gRPC code was moved to api/. server/ isn't dependent on gRPC anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-27doc: update lib.md with the new native APIsFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-20remove gRPC dependency from table/FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-20remove REQ_GRPC_ADD_NEIGHBORFUJITA Tomonori
replace REQ_GRPC_ADD_NEIGHBOR with REQ_ADD_NEIGHBOR Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-20fix typo: s/dispodition/disposition/ in policy documentJun-ya Kato
2016-07-20Fix and get along with gobgpd v1.9Shintaro Kojima
2016-07-11Add shorter prefix searchBen Agricola
Adds a shorter-prefixes search mode that finds any identical-or-less-specific routes than the input values. Bug-Url: #1006 Signed-off-by: Ben Agricola bagricola@squiz.co.uk
2016-06-06server: refactoring for monitorbestchanged api. use watcher infraISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-06-01docs: another update for lib.mdISHIDA Wataru
fix 9f6b62a5e5abcebde0008b56edcb8f40bd762d52 [skip ci] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-31docs: update lib.mdISHIDA Wataru
[skip ci] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-29docs: fix typos in cli examplesFUJITA Tomonori
[ci skip] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 01:20:45 +0000