summaryrefslogtreecommitdiffhomepage
path: root/config
AgeCommit message (Collapse)Author
2015-10-06add log messages at bootupFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-09-25config: add zebra redistribution configurationISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-09-25config: add mpls label range configurationISHIDA Wataru
you can specify mpls label range from which gobgpd automatically assign to vpn routes like below ``` [Global] As = 65000 RouterId = "192.168.255.1" [Global.MplsLabelRange] MinLabel = 1000 MaxLabel = 1999 ``` default values (min:16000, max:1048575) is taken from cisco ios xr. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-09-17config: add zebra configurationHiroshi Yokoi
Signed-off-by: Hiroshi Yokoi <yokoi.hiroshi@po.ntts.co.jp>
2015-09-16packet: support draft-ietf-idr-flow-spec-v6-06ISHIDA Wataru
you can add ipv6 flowspec routes like below $ gobgp global rib add match destination 2001::/64 10 label '=200' then discard -a ipv6-flowspec $ gobgp global rib -a ipv6-flowspec Network Next Hop AS_PATH Age Attrs *> [destination:2001::/64/10][label: =200] fictitious 00:00:23 [{Origin: i} {Extcomms: [discard]}] scenario_test is also added Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-09-13Add bmp supportFUJITA Tomonori
Can be enabled like: [Global] [Global.GlobalConfig] As = 64512 RouterId = "10.0.255.254" [BmpServers] [[BmpServers.BmpServerList]] [BmpServers.BmpServerList.BmpServerConfig] Address = "127.0.0.1" Port=11019 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-09-08server: add mrt bgp4mp supportFUJITA Tomonori
You can enable the feature like: [Global] [Global.GlobalConfig] As = 64512 RouterId = "10.0.255.254" [Global.Mrt] FileName = "update.dump" Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-19config file support rpki configurationFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-13config: add rpki configurationNaoto Hanaue
2015-08-12config: fix peer type detectionFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-12rpki: don't show validation result if rpki disabledFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-12bgp/cli: support flowspec (RFC5575)ISHIDA Wataru
draft-ietf-idr-flowspec-redirect-rt-bis-05 is also implmented. TODO: draft-ietf-idr-flow-spec-v6-06 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-08-11config: add structure to be used in the match of the validation result of rpkiNaoto Hanaue
2015-08-11config: cancel as-path-set-memberHiroshi Yokoi
2015-08-11config: insert gobgp-specific elements with augment statements defined in ↵Hiroshi Yokoi
gobgp.yang
2015-08-11config: rename distributed-policy to in-policyNaoto Hanaue
2015-08-08config: add the structure that holds the state of administrator operatingNaoto Hanaue
2015-08-06config: don't crash when failing to reload config fileFUJITA Tomonori
gobgpd crashes when failing to read a config file at startup but should not crash when failing to reload the config file. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-05config: change type of Prefix in the PrefixSetNaoto Hanaue
2015-08-05fix policy dynamic updateFUJITA Tomonori
handle dynamic policy peer binding Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-08-05config: change the structure of Neighbor.RouteServer as the ↵Naoto Hanaue
Neighbor.RouteReflector
2015-08-05config: change the structure of AsPathSet, CommunitySet and ExtCommunitySet ↵Naoto Hanaue
as the PrefixSet
2015-07-31config: use the latest openconfig yangHiroshi Yokoi
2015-07-11policy: support aspath prepend actionHiroshi Yokoi
2015-07-05server/cli: support add/delete vpnv4/vpnv6 routesISHIDA Wataru
$ gobgp global rib add 1:10.0.0.1:1000:10.0.0.0/24 -a vpnv4 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-07-01policy: distribute policyHiroshi Yokoi
2015-05-20config: change SetCommunity.Options's type to stringHiroshi Yokoi
2015-05-01table: add support for route target constraint nlriISHIDA Wataru
add rtc route $ gobgp global rib add 65000 77 -a rtc check it $ gobgp global rib -a rtc Network Next Hop AS_PATH Age Attrs *> 65001:65000:75 0.0.0.0 [65001] 00:15:35 [{Origin: IGP}] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-04-25table: add support for encapsulation nlriISHIDA Wataru
add encap end point route(10.0.0.1) with vni 20 $ gobgp global rib add 10.0.0.1 20 -a encap check it $ gobgp global rib -a encap Please specify one command of: add or del Network Next Hop AS_PATH Age Attrs *> 10.0.0.1 0.0.0.0 [64512] 00:00:01 [{Origin: IGP} {Encap: < VXLAN | color: 20 >}] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-04-24config: add bgp-policy configurationHiroshi Yokoi
2015-03-25config: add default connect retry valueISHIDA Wataru
use RFC4271 recommended value. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-24policy: apply import/export policyHiroshi Yokoi
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-21config: add evpn to the default address families to global ribFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20config: set PeerType defaultFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20config: add 'Global.AfiSafiList' default valueISHIDA Wataru
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-11config: use global-address-family-configurationHiroshi Yokoi
2015-03-11config: add routing-policy containersHiroshi Yokoi
2015-03-05config: validate route family configuraitonFUJITA Tomonori
If not specified, use the same AFI with peer IP address as a default. To avoid circular import, define BGP_ORIGIN_ATTR_TYPE consts bgp.go Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-04config: fix attribute nameHiroshi Yokoi
2015-03-03config: make a field name same to its type nameHiroshi Yokoi
embedding doesn't work with toml. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-03update the whole code for the latest openconfig yang filesFUJITA Tomonori
The modified openconfig yang files are available at: https://github.com/osrg/yang/tree/gobgp Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-03config: remove time.Time in BgpNeighborCommonStateTypeFUJITA Tomonori
This is part of work to remove time.Time in bgp_config.go since no nice way to represent time.Time with yang. We replace time.Time with int64. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-03config: remove starttime in BgpGlobalStateType structFUJITA Tomonori
It's not used. We'll add again when it'll become necessary. This is part of work to remove time.Time in bgp_config.go since no nice way to represent time.Time with yang. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-02-25config: set default config value only when not specifiedFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-02-16server: support discarded countersFUJITA Tomonori
fujita@ubuntu:~/git/gobgp$ ./cli/gobgpcli show neighbor 10.0.255.7 BGP neighbor is 10.0.255.7, remote AS 65070 BGP version 4, remote router ID 192.168.0.7 BGP state = BGP_FSM_ACTIVE, up for 0:00:01.982115 BGP OutQ = 0, Flops = 4 Neighbor capabilities: MULTIPROTOCOL: advertised and received ROUTE_REFRESH: advertised FOUR_OCTET_AS_NUMBER: advertised and received Message statistics: Sent Rcvd Opens: 4 4 Notifications: 4 0 Updates: 8 0 Keepalives: 4 4 Route Refesh: 0 0 Discarded: 0 4 Total: 20 12 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-01-29config: support enum value and add ietf yang filesHiroshi Yokoi
2015-01-29config: fix BGP_ORIGIN_ATTR_TYPE_ valuesFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-01-26config: make config file failure FatalFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-01-18server: support idlehold time after resetFUJITA Tomonori
After resetting a peer, the peer will remain idle for idlehold time (by default 30 seconds). It can be configured via IdleHoldTImeAfterReset. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-01-17server: implement OutQ and Flops supportFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 14:34:12 +0000