summaryrefslogtreecommitdiffhomepage
path: root/api
AgeCommit message (Collapse)Author
2016-11-14client: add golang client libraryWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-14config: use struct type instead of []byte for capability and open msgWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-14policy: fix bug of policy with multiple statementsWataru Ishida
policy can have multiple statements. In each statement, when condition is matched, route-action is finally evaluated after actions with mods. When route-action is 'none', we contine to next statement if it exists. When route-action is 'accept' or 'reject', we stop proceeding. This patch fixes a bug that route-action can't be set to 'none' which means route-action always be set to 'accept' or 'reject' and can't proceed to the next statement. Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-05bmp: fix wrong monitoring policy type translationWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-04support neighbor belongs to VRFWataru Ishida
$ gobgp vrf add red rd 100:100 rt both 100:100 $ gobgp neighbor add 10.0.0.1 as 2 vrf red $ gobgp vrf red neighbor Peer AS Up/Down State |#Advertised Received Accepted 10.0.0.1 2 never Active | 0 0 0 Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-11-03remove label allocation completelyFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-10-16cli/api: support getting table summary informationWataru Ishida
$ gobgp global rib summary -a ipv4 $ gobgp neighbor 10.0.0.1 local summary $ gobgp neighbor 10.0.0.1 adj-in summary $ gobgp neighbor 10.0.0.1 adj-out summary Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-10-10policy: support large-community match/actionWataru Ishida
close #1133 Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-10-08table: ensure compatibility with archs where int == int32Vincent Bernat
MED actions are expected to be int64 and AS are expected to be uint32. Use ParseInt/ParseUint instead of Atoi for those until the tests pass on ARM.
2016-10-04Allow creating a server with a user specified grpc server.Chris Stockton
2016-10-04cli: support specifying vrf-id when creating vrfWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-09-30api: add id to VrfRequestFUJITA Tomonori
to support VRF ID for Zebra Protocol v3. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-09-29Support of ZAPI version 3 (handles VRF ID).kishiguro
2016-09-13server/table: fix a bug of vrf route injectionWataru Ishida
regression due to 43dc07d72353fc8bcb79a18a5739ea0a90dda6bb before: $ gobgp vrf add vrf01 rd 100:100 rt both 100:100 $ gobgp vrf vrf01 rib add 10.0.0.0/24 $ gobgp global rib -a ipv4 Network Next Hop AS_PATH Age Attrs *> 10.0.0.0/24 0.0.0.0 00:00:19 [{Origin: ?} {Extcomms: [100:100]}] after: $ gobgp vrf add vrf01 rd 100:100 rt both 100:100 $ gobgp vrf vrf01 rib add 10.0.0.0/24 $ gobgp global rib -a ipv4 Network not in table $ gobgp global rib -a vpnv4 Network Labels Next Hop AS_PATH Age Attrs *> 100:100:10.0.0.0/24 [16000] 0.0.0.0 00:00:19 [{Origin: ?} {Extcomms: [100:100]}] Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-26add RemoteRouterId to config.NeighborStateFUJITA Tomonori
Stop using config.NeighborState's Description in a hacky way for the remote Router Id. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-26zebra: add grpc apiFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-25api: publish ToPathApi(*table.Path)Wataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-25api/cli: kill cmd package custom path/destination structsWataru Ishida
reuse table package Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-25server/api: fix GetRib API to return sorted destinationWataru Ishida
the feature has been broken. Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-21api: enable to set/get UseMultiplePaths global settingWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-17policy: support route-type conditionISHIDA Wataru
// match with routes locally generated $ gobgp policy statement s0 add condition route-type local // match with routes received from eBGP peers $ gobgp policy statement s0 add condition route-type external // match with routes received from iBGP peers $ gobgp policy statement s0 add condition route-type internal Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-16api: support address family filtering of MonitorRib APIISHIDA Wataru
the feature was somehow dropped Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-14support mrt table dump (TABLE_DUMPv2 format)FUJITA Tomonori
Only global rib dumping is supported for now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-02api/cli: api/cli support for unnumbered bgpISHIDA Wataru
fron cli: ``` $ gobgp neighbor add interface eth1 as 65000 $ gobgp neighbor del interface eth1 $ gobgp neighbor eth1 Peer AS Up/Down State |#Advertised Received Accepted eth1 65000 00:00:05 Establ | 0 0 0 ``` Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29api/cli: add LocalAddress to PeerConf structISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29server: move default config setting logic inside BgpServer's methodsISHIDA Wataru
We have three ways to configure gobgp. config file, grpc api and native lib. Every methods eventually call (*server.BgpServer).Start() or (*server.BgpServer).AddNeighbor() when starting bgp server or adding neighbors. This commit moves default config setting logic inside them to remove redundant code in grpc_server.go and simplify the usage of native lib. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29config: curve out code specific to default neighbor config settingISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29move grpc_server.go from server/ to api/FUJITA Tomonori
Now all gRPC code was moved to api/. server/ isn't dependent on gRPC anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-11Add shorter prefix searchBen Agricola
Adds a shorter-prefixes search mode that finds any identical-or-less-specific routes than the input values. Bug-Url: #1006 Signed-off-by: Ben Agricola bagricola@squiz.co.uk
2016-06-07api: catch up the latest grpcFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-06-06server: refactoring for monitorbestchanged api. use watcher infraISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-26policy: add support setting self ip address as next-hopISHIDA Wataru
from configuration file [policy-definitions.statements.actions.bgp-actions] set-next-hop = "self" from cli $ gobgp policy statement stmt1 add action next-hop self Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-25policy: add local-pref actionISHIDA Wataru
$ gobgp policy statement st01 add action local-pref 110 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-21cli: include route-reflector/route-server infomation in Peer messageISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-05-10grpc: remove MRT dump streaming GRPC APIFUJITA Tomonori
Seems that nobody is interested in receiving MRT dump over streaming GRPC API. Let's remove it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-05-10Refactoring GRPC APIFUJITA Tomonori
Let's follow the conventions of GRPC - Stop using one method for multiple operations like add, delete, etc. IOW, remove all the ModHoge APIs. - Stop abusing Streaming RPC API. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-04-25remove collector mode supportFUJITA Tomonori
We need to update yang config collector mode (split into config and state). before that, let's remove the feature itself to see if there is any user of it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-04-21rpki: delete roa validation stream APIFUJITA Tomonori
better to be implemented outside GoBGP. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-04-21config: add set-next-hop optiontamihiro
2016-04-19cli: show prefix-limit configuration by `gobgp neighbor <neighbor-addr>`ISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-04-19GRPC: catch up with the latest GRPC interfaceFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-04-11rpki: support re-validation for specific prefixFUJITA Tomonori
You can specify a prefix to be validated like: $gobgp rpki validate 10.0.0.0/24 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-04-02rpki: support dynamic add/delete operations via gRPCFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-03-20server: support mrt dump rotation like QuaggaFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-03-17server: add missing api.Global fieldISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-03-02api: add neighbor-ip field to grpc Path messageISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-02-27ops: fix and integration the attribute name that indicates the route ↵Naoto Hanaue
received from an external resource
2016-02-21rpki: remove homegrown SplitHostPort functionFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-02-19update protoNaoto Hanaue
2016-02-13server/api: add DEL_ALL operation support in ModPath() apiISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 19:17:14 +0000