summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2016-08-25server: handle error of net.ParseCIDR()Wataru Ishida
invalid key could crash BgpServer
2016-08-21fixed some misspell errorPeng Xiao
Signed-off-by: Peng Xiao <xiaoquwl@gmail.com>
2016-08-21api: enable to set/get UseMultiplePaths global settingWataru Ishida
Signed-off-by: Wataru Ishida <ishida.wataru@lab.ntt.co.jp>
2016-08-17travis: add go1.7FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-17policy: fix global default policy initializationISHIDA Wataru
Allow all routes coming in and going out by default Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-17Revert "server: add missing default policy setting in (*BgpServer).Start()"ISHIDA Wataru
This reverts commit 7bf91ea437181b85ecc3a1473adc3fbc0da80cbe. This commit causes misleading error message "failed to get policy info" when global policy is configured at startup.
2016-08-17docs: add a route-type condition exampleISHIDA Wataru
[ci skip] Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-17policy: support route-type conditionISHIDA Wataru
// match with routes locally generated $ gobgp policy statement s0 add condition route-type local // match with routes received from eBGP peers $ gobgp policy statement s0 add condition route-type external // match with routes received from iBGP peers $ gobgp policy statement s0 add condition route-type internal Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-17server: passive tcp md5 support on OpenBSDFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-17server: add debug messages about tcp md5FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-17server: support passive md5 and ttl on *bsdFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-16cli: support setting flowspec "procotol" in octetISHIDA Wataru
$ gobgp global rib -a ipv4-flowspec add match protocol 100 then discard close #1052 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-16api: support address family filtering of MonitorRib APIISHIDA Wataru
the feature was somehow dropped Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-15server: move linux specific functions to sockopt_linux.goFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-15test: skip BGPKeepAliveISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-15Revert "test: disable monitoring tests for now"ISHIDA Wataru
This reverts commit d4b8a858299acc7164f452c8aa4180695252f38e. workaround commit: 10d13783c61c0a89dd1535e75bfa483fb44dccd4
2016-08-15test: execute gobgp monitor on docker hostISHIDA Wataru
docker-py's exec_start stream fails often. execute gobgp monitor on docker host instead. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-15mrt: support per-peer table dump with route server configurationFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-14cli: fix ParseExtendedCommunities() to correctly parse action 'accept'ISHIDA Wataru
close #1049 Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-14support mrt table dump (TABLE_DUMPv2 format)FUJITA Tomonori
Only global rib dumping is supported for now. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-12test: disable monitoring tests for nowFUJITA Tomonori
docker-py's exec_start stream fails often somehow.
2016-08-12travis: use the old version of docker (1.8.3)FUJITA Tomonori
Seems that the latest often fails for some reasons. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-11server: fix handling the best path change from ebgp to ibgpFUJITA Tomonori
We have the best path from ebgp and advertise it to an ibgp peer. Then we got the new best from ibgp and then we have to explicitly withdraw the old best (and don't send the new best from ibgp to the ibgp peer). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-11test: wait for condition instead of randomly waiting in zebra testingsFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-08server: add missing default policy setting in (*BgpServer).Start()ISHIDA Wataru
policy.Reset() won't initialize global policy unless we pass a map with key table.GLOBAL_RIB_NAME Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-05.travis.yml: test on osxISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-05config: fix compile error on non-linux platformISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-03server: fix advertising multiple local withdrawals with same prefixISHIDA Wataru
a bug introduced by 332766189685028c4f9852e4285fb1a9025223cc Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-03test: deconfigure deleted peer for later testsISHIDA Wataru
Depending on Docker version, Docker re-allocates deleted container's IP address to new container. If both deleted and new container run a BGP daemon and are peering to other containers, other containers who think they are connecting to deleted container's BGP daemon wrongly connect to new container's BGP daemon (because IP address is same) To avoid this issue, let's deconfigure deleted peer before going to next test. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-03table: make some RoutingPolicy methods unexportedFUJITA Tomonori
All the exported methods are properly serialized with mutex. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-03move policyMutex to policy/FUJITA Tomonori
It's more logical. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-03server: unify setPolicyByConfig and handlePolicyFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-02GoBGP 1.10FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-08-02api/cli: api/cli support for unnumbered bgpISHIDA Wataru
fron cli: ``` $ gobgp neighbor add interface eth1 as 65000 $ gobgp neighbor del interface eth1 $ gobgp neighbor eth1 Peer AS Up/Down State |#Advertised Received Accepted eth1 65000 00:00:05 Establ | 0 0 0 ``` Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-02config: support unnumbered bgp peeringISHIDA Wataru
from configuration file: ```toml [[neighbors]] [[neighbors.afi-safis]] neighbor-interface = "eth0" peer-as = 65000 ``` Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-02config: fix error propagatation in default config settingISHIDA Wataru
bug introduced by e97a59c5390fc05ba75673fb4ff7e061c1e73e4f Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-08-02packet: Change graceful restart tuple (afi/safi/flags) parsing to use ↵Tim Evens
capability length instead of remaining parameter length. Fixes #1037
2016-08-01server: UpdateNeighbor() needs address parameter checkingFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-31gobgp: support mrt injecting only best pathsFUJITA Tomonori
$ gobgp mrt inject global --only-best your-mrt-dump-file Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-31server: fix wrong log messageFUJITA Tomonori
Fix the regression due to c4fe45902e736a858c4870bcab01c9143551f696 Also switch from Fatal from Warn. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-30packet/bgp: treat 0x000000 as a withdraw labelISHIDA Wataru
though RFC3107 says the label field should be set to 0x800000 in the withdrawn routes, some platform uses 0x000000 for that purpose. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-30all logging is done with log.WithFieldsdsp
Signed-off-by: dsp <dsp@2f30.org> Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29api/cli: add LocalAddress to PeerConf structISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29config: simplify ipv6 link local address peeringISHIDA Wataru
from cli: ``` gobgp neighbor add fe80::902f:4eff:fe52:6985%eth0 as 65000 ``` from configuration file: ```toml [[neighbors]] [[neighbors.afi-safis]] [neighbors.config] neighbor-address = "fe80::902f:4eff:fe52:6985%eth0" peer-as = 65000 ``` Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29server: move default config setting logic inside BgpServer's methodsISHIDA Wataru
We have three ways to configure gobgp. config file, grpc api and native lib. Every methods eventually call (*server.BgpServer).Start() or (*server.BgpServer).AddNeighbor() when starting bgp server or adding neighbors. This commit moves default config setting logic inside them to remove redundant code in grpc_server.go and simplify the usage of native lib. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29config: curve out code specific to default global config settingISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29config: curve out code specific to default neighbor config settingISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2016-07-29drop go 1.3 and 1.4 supportFUJITA Tomonori
Seems like golang.org/x/net/http2 will not support 1.3 and 1.4 any more. Let's stop testing with both on travis-ci. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-29move grpc_server.go from server/ to api/FUJITA Tomonori
Now all gRPC code was moved to api/. server/ isn't dependent on gRPC anymore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2016-07-29remove unused GrpcRequest and GrpcResponseFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 05:23:00 +0000