summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2018-05-09server/server: Fix typoSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-05-08gobgp/cmd: add router-mac option for BGP EVPN Type 2Paul Greenberg
The `router-mac` option in `gobgp` CLI allows sending Router's MAC Extended Community via BGP EVPN Type 2 and Type 5 advertisements. As explained in below RFC draft, this community is used to carry the MAC address of the VTEP where MAC-IP pair resides. More info: For example, GoBGP router (R1) peers with Cisco router (R2). R1 is used by an orchestraction platform, e.g. OpenStack, Docker Swarm, etc., to advertise container MAC-IP bindings. When R1 advertises the binding it also sets next hop for the route as the host where the MAC-IP binding (i.e. container) resides. When R2 receives the route, it will not install it unless Router's MAC Extended Community is present. R2 will use the MAC address in the community to create an entry in MAC address table of R2 pointint to NVE interface. ``` gobgp global rib -a evpn add macadv e9:72:d7:aa:1f:b4 \ 172.16.100.100 etag 0 label 34567 rd 10.1.1.1:100 \ rt 65001:100 encap vxlan nexthop 10.10.10.10 \ origin igp router-mac e9:72:d7:aa:1f:b4 gobgp global rib -a evpn add nexthop 10.10.10.10 origin igp \ prefix 172.16.100.100/32 esi 0 etag 0 rd 10.1.1.1:100 \ rt 65001:100 gw 10.10.10.10 label 34567 encap vxlan \ router-mac e9:72:d7:aa:1f:b4 ``` In the above example, a host with IP of `10.10.10.10` runs a container connected to an Open vSwitch instance. The container's IP address is `172.16.100.100` and MAC address `e9:72:d7:aa:1f:b4`. The Open vSwitch is VTEP with `tunnel_key=34567`, i.e. VNID `34567`. GoBGP (R1) and Cisco (R2) routers are in BGP AS 65001. R1's IP is `10.1.1.1`. R2 used RT of `65001:100` to import routes and place them into appropriate VRF. In this case the VRF is associated with L2VNI from VLAN 300. Upon the receipt of the above BGP EVPN Type 2 and Type 5 routes, R2 will create create a MAC address entry pointing to it's NVE interface with destination IP address of `10.10.10.10`. ``` Legend: * - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC age - seconds since last seen,+ - primary entry using vPC Peer-Link, (T) - True, (F) - False, C - ControlPlane MAC VLAN MAC Address Type age Secure NTFY Ports ---------+-----------------+--------+---------+------+----+------------------ * 300 e972.d7aa.1fb4 static - F F nve1(10.10.10.10) ``` The R2 will use the `router-mac e9:72:d7:aa:1f:b4` as the destination MAC address of the inner VXLAN packet. For example, an underlay host `20.20.20.20` ping the container. The inner VXLAN L2 destination address is `e9:72:d7:aa:1f:b4`. The inner VXLAN L2 source address is R2's MAC. The outer VXLAN L3 source address, i.e. `10.2.2.2` is R2' NVE address. ``` OUTER VXLAN L2: 10:20:08:d0:ff:23 > b2:0e:19:6a:8d:51 OUTER VXLAN L3: 10.2.2.2.45532 > 10.10.10.10.4789: VXLAN, flags [I] (0x08), vni 34567 INNER VXLAN L2: 4e:f4:ca:aa:f6:7b > e9:72:d7:aa:1f:b4 INNER VXLAN L3: 20.20.20.20 > 172.16.100.100: ICMP echo reply, id 66, seq 1267, length 64 ``` See also: https://tools.ietf.org/html/draft-sajassi-l2vpn-evpn-inter-subnet-forwarding-05#section-6.1 Signed-off-by: Paul Greenberg <greenpau@outlook.com>
2018-05-07table: use shorter key for map of ipv4 and ipv6 prefixesFUJITA Tomonori
save about 100MB memory. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove Radixkey member in Destination structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove key member in Path structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove uuid member in originInfo structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove VrfIds member in Path structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07avoid updating Path in the rib via MarkStale()FUJITA Tomonori
A path object in the adj-in is also in the master rib. We can't update such. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07table: remove withdraw/newPath/oldPath Lists in DestinationFUJITA Tomonori
Shrink memory usage. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07preparation for shrinking Destination structureFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07docs: update policy about route server setupFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-07use sorted single master table for route server setupFUJITA Tomonori
https://github.com/osrg/gobgp/issues/1249 The IN policy was removed. The modification by the IMPORT policy are visible to all route server peers. This saves some dozens bytes memory per a path. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-04-21contrib: systemd unit files and docsPaul Greenberg
This commit contains `systemd` unit file and the documentation describing how to run `gobgp` as `systemd` managed service on CentOS/RHEL Linux distribution. Signed-off-by: Paul Greenberg <greenpau@outlook.com>
2018-05-01GoBGP 1.31FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-05-01cli: Show best path symbol on VRF RIB commandIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-27Close incoming channel in zapi on receive errorSam Hitz
2018-04-25Restore PathIdentifier for paths belonging to VRFsDavid Barroso
2018-04-18fsm: Don't wait EoR if the peer is restartingSatoshi Fujimoto
RFC4724(Graceful Restart) says that if "Restart State" bit is set in the Open message, its peer must not wait for the EoR marker from the speaker before advertising routing information to the speaker. But currently, GoBGP waits EoR even if "Restart State" bit is set in graceful restart process. This commit fixes it to skipping syncing process for the restarting peers. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-04-18server: Fix outgoing rtfilterIWASE Yusuke
Currently, the result of Route Target Constraint filter is unexpectedly ignored when Route Reflector reflecting the VPN routes because "ignore" flag can be overwritten without evaluated. This patch fixes to return "nil" before "ignore" flag overwritten and enable to filter outgoing VPN routes based on RTC. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-18rtc_test: Add a TODO commentIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-13rtc_test: Add description for topologiesIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-13test_rtc: Use assertEqual for better log messageIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-13travis: Run scenario test for RTCIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-10goreleaser: add arm64 binaryFUJITA Tomonori
fixes #1640 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-04-09server: Avoid infinite UPDATE loop of RTM NLRIIWASE Yusuke
When GoBGP dropped adj-Rib-out per Peer, we fixed to send the same Route Target Membership (RTM) NLRI even if it is already sent. This can cause the infinite UPDATE loop when Route Reflector(RR) reflects RTM NLRI to its clients. For example, the following situation causes the infinite UPDATE loop. Topology: +----- RR -----+ | | Client1 Client2 When Client1 has VRF with RT 65000:1 and sends a RTM NLRI to RR, then RR reflects the NLRI to Client2. If a new VRF with the same RT 65000:1 on Client2 is created, Client2 will notify it to RR, then RR calculates the best, but RR will send the NLRI from Client2 to Client1 even if it is not the best. Client1 receives the NLRI again, calculates the best and re-sends the best. Then, RR reflects the received NLRI ... (infinite loop). This patch fixes to compare the candidate path to be sent with the old path and assume the given candidate path was already sent before if the candidate path and the old path is the same path. Then avoids the infinite UPDATE loop. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-05server/rpki: fixed ROA sortAbhijit Gadgil
The typo in function Less() was causing logical error during comparison and the comparison would always return whether AS number was less or not regardless of Maxlen. fixes #1633
2018-04-03packet/bgp: Getter functions for AS segmentIWASE Yusuke
This patch adds getter functions for the segment type and AS list of each segment without using type assertion. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Return nil for invalid redirect IP addressIWASE Yusuke
When initializing IPv4AddressSpecificExtended or IPv6AddressSpecificExtended structure, nil value will be returned when an invalid IP address is given. But the redirect action extended community types; - RedirectIPv4AddressSpecificExtended - RedirectIPv6AddressSpecificExtended which embed IP address specific extended community types, are not aware of nil value when initializing, so these redirect action extended community can be unexpectedly initialized with nil value. This patch fixes to check return value of the embedded structure and also return nil when failure of initializing it. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Initializer func for PMSI Tunnel ID typesIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Avoid data races when serializingIWASE Yusuke
Because "Serialize()" functions of NLRIs or PathAttributes can be called from some different goroutines, updating fields of a structure can cause data races. This patch moves the normalization for each field (mostly length and flags calculation) into "NewXxx()" or "DecodeFromBytes()" and avoids the data races. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Initializer func for EVPN NLRIsIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Remove length argument from NewEVPNNLRIIWASE Yusuke
The length value can be retrieved from the route type specific data field and need not to be specified at the initialization. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Missing funcs to calc byte length of NLRIIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03packet/bgp: Remove binary field of RouteDistinguisherIWASE Yusuke
Keeping binary representation increases the size of structure and can cause data races. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-03bgp_race_test: Unit test to detect data racesIWASE Yusuke
This patch adds UT file to detect data races when serializing BGP UPDATE messages. Example of Usage: $ go test -race github.com/osrg/gobgp/packet/bgp -run ^Test_RaceCondition$ Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-02README: Update list of docsIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-02*.md: Improvements for markdownlintIWASE Yusuke
Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-02travis: Introduce markdownlintIWASE Yusuke
When using IDE (e.g. VSCode), we can easily check the results of markdownlint and it should not be a heavy burden to write docs. This patch introduces an unit test to invoke markdownlint on Travis-CI. See https://github.com/DavidAnson/markdownlint/blob/master/doc/Rules.md, for configuration details of ".markdownlint.json". Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-04-01GoBGP 1.30FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-03-28cmd/*: Pass number of expected args to extractReserved()Satoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-03-28cmd/common: Specify number of expected argumentsSatoshi Fujimoto
In CLI operation, currently, unexpected argument names (such as 'aspath' for 'gobgp neighbor add') may pass the validations and return no errors. This commit prevents accepting those argument names by specifying the number of expected arguments for each argument names. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-03-27server/server: Set rsRib to RS client in adding dynamic neighborSatoshi Fujimoto
Currently, globalRib is always set to dynamic neighbors even if they are route server clients. This patch fixes to set rsRib when the neighbor is a route server client. Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-03-22Fix AddPath MarshallingOption bug.kishiguro
When neighbor had AddPath capability, then disable AddPath after that. Old marshallingOptions remains. So once neighbor enabled AddPath it can't be disabled with no AddPath capability option in Open Message.
2018-03-20cmd/global: Refine parameter description in Help messageSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-03-20cmd/global: Add help messages for L3VPN and MPLSSatoshi Fujimoto
Signed-off-by: Satoshi Fujimoto <satoshi.fujimoto7@gmail.com>
2018-03-19packet/bgp: make serialization of ipv4/v6 nlri goroutine-safeFUJITA Tomonori
The serialization of ipv4/v6 nlri should be goroutine-safe but somehow not. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-03-02GoBGP 1.29FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-02-25docs: update gettting-startedFUJITA Tomonori
The way to install GoBGP is outdated. README tells how so let's remove. Also bash completion scripts haven't be updated for long time so let's remove too. [ci skip] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2018-02-23zclient: Avoid directly access to RIBIWASE Yusuke
In order to avoid races, zclient should not access to RIB without calling APIs of BgpServer. But currently zclient directly accesses to the global RIB when handling NEXTHO_UPDATE messages. This patch fixes this problem by calling BgpServer.GetRib(). Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
2018-02-22packet/bgp: Return specified type value for UnknownExtendedIWASE Yusuke
Currently, "UnknownExtended.GetTypes()" returns always the constant values even if "Type" value is given. This patch fixes to return the given type value and use the first "Value" byte as the sub type. Also, introduces "NewUnknownExtended()" function for the convenience. Signed-off-by: IWASE Yusuke <iwase.yusuke0@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 03:40:06 +0000