summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2015-03-29scenario_test: add route server flagISHIDA Wataru
this is a preparation for normal BGP scenario test Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-29scenario_test: add option to specify exabgp_pathISHIDA Wataru
can be used to use local exabgp repository Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-29scenario_test: update gobgp configurationISHIDA Wataru
now gobgp changes its behavior according to PeerType Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-29scenario_test: enable debug logging for quaggaISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-29scenario_test: fix typoISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-29.gitignore: ignore *.pycISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-25packet: fix mpreach nlri path attributeISHIDA Wataru
RFC2545#section-3 says, when AFI is ipv6, mpreach nlri may include a link-local address just after a global address as a nexthop. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-25config: add default connect retry valueISHIDA Wataru
use RFC4271 recommended value. Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-25server: support active connectionISHIDA Wataru
md5 auth is not supported yet for active conntion Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-25server: don't run fsm for global ribISHIDA Wataru
Signed-off-by: ISHIDA Wataru <ishida.wataru@lab.ntt.co.jp>
2015-03-24policy: test policy existenceHiroshi Yokoi
2015-03-24policy: support ipv6 and add test codeNaoto Hanaue
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-24policy: add example configs for import policyHiroshi Yokoi
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-24policy: apply import/export policyHiroshi Yokoi
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-24policy: add prefix filterNaoto Hanaue
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-23tabele: remove unnecessary withdrawn route checkYuji Oshima
2015-03-22tools: fix bash completion scriptFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-22add bash completion for gobgpcliFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-21config: add evpn to the default address families to global ribFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-21api: add EVPN route family supportYuji Oshima
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-21table: add EVPN route family supportYuji Oshima
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-21packet: fix EVPN route family NlriYuji Oshima
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20config: set PeerType defaultFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20peer: don't send back routes to the source.ISHIDA Wataru
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20config: add 'Global.AfiSafiList' default valueISHIDA Wataru
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20api/cli: add show global commandISHIDA Wataru
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20peer: update pathattr for non-route-server clientISHIDA Wataru
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-20server: add Global Rib to support normal BGP functionalityISHIDA Wataru
We handle Global Rib as a Peer. Normail (non route server client) peer has one sibling, Global Rib peer. Global Rib peer has all normal peers as siblings. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-19table: remove unnecessary distinction of pathsISHIDA Wataru
struct Path has a flag which can tell whether the path is withdrawal path or not. so table.ProcessPaths() needs not to return withdrawal path and non-withdrawal path separetly. this removes such unnecessary distinction. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-14server: fix handing of a connection closed by peerFUJITA Tomonori
When a peer closed a connection (e.g. after we send a notification), rx goroutine finds it immediately since read() returns an error and kills tomb. The problem is that tx goroutine doesn't check if tomb Dying() so tx doesn't die until tx tries to write keepalive to the socket (and it doesn't never happen if keepalive interval is zero). So fsm does't become idle shortly. This fixes tx to check Dying() and makes sure that it sends notification messages befor dying if they exists. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-12packet: add EVPN NLRI parser and serializerFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-11config: use global-address-family-configurationHiroshi Yokoi
2015-03-11config: add routing-policy containersHiroshi Yokoi
2015-03-11table: IPv4_VPN route familyYuji Oshima
2015-03-10server: add helper function to send paths to siblingsFUJITA Tomonori
kill duplicated code. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-10table: use github.com/tchap/go-patricia/patricia instead of our forkFUJITA Tomonori
The fix for sorting is merged: https://github.com/tchap/go-patricia/commit/f8d475d887c8f22feb1c7d6748f2864681be53b3 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-09scenario_test: specify address-family in the URL to get local-ribHiroshi Yokoi
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-09server: handle the route family configuration mismatch with peerFUJITA Tomonori
Even if a peer is configured to support v4/v6, the peer might send only v4 capability with Open message. In this case, we have to send only ipv4 info. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-08server: adj-in/out supports route families rather than v4/v6FUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-08server: support multiple route familes per peerFUJITA Tomonori
You can configure like the following: [Global] As = 65032 RouterId = "192.168.255.1" [[NeighborList]] NeighborAddress = "10.0.255.1" PeerAs = 65001 [NeighborList.RouteServer] RouteServerClient = true [[NeighborList.AfiSafiList]] AfiSafiName = "ipv4-unicast" [[NeighborList.AfiSafiList]] AfiSafiName = "ipv6-unicast" Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-07rest: support show table with specified route familyFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-07rest: clean up request handlingFUJITA Tomonori
merge duplicated functions and kill hacky strings Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-06server: remove rf in ServerMsgFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-06table: NewTableManager takes route familiesFUJITA Tomonori
NewTableManager creates tables for only specified route families. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-06server: check route refresh afi and safiFUJITA Tomonori
If it's not valid, log a warning and ignore. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-06table: remove RF from PeerInfoFUJITA Tomonori
Cleanup for supporting multiple route families. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-05config: validate route family configuraitonFUJITA Tomonori
If not specified, use the same AFI with peer IP address as a default. To avoid circular import, define BGP_ORIGIN_ATTR_TYPE consts bgp.go Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-05tools: update example_toml.go for route family configuraitonFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
2015-03-05scenario_test: remove the template configuration file of gobgp and quagga to ↵Naoto Hanaue
use for malformed test
2015-03-05scenario_test: change generated by the program the configuration file of ↵Naoto Hanaue
malformed test
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 06:36:16 +0000