1 files changed, 149 insertions, 0 deletions
diff --git a/docs/sources/add-paths.md b/docs/sources/add-paths.md
new file mode 100644
index 00000000..152ecef2
--- /dev/null
+++ b/docs/sources/add-paths.md
@@ -0,0 +1,149 @@
+# Additional Paths
+
+This page explains how to configure BGP Additional Paths features on GoBGP.
+GoBGP supports to advertise ADD-PATH capability according to
+[RFC7911](https://tools.ietf.org/html/rfc7911) and advertise paths with
+the "Advertise N Paths" mode described in
+[draft-ietf-idr-add-paths-guidelines](https://tools.ietf.org/html/draft-ietf-idr-add-paths-guidelines).
+
+## Prerequisites
+
+Assumed that you finished [Getting Started](https://github.com/osrg/gobgp/blob/master/docs/sources/getting-started.md).
+
+## Contents
+
+- [Configuration](#section0)
+- [Verification](#section1)
+    - [Example Topology and Configuration](#section1.1)
+    - [Advertise Multiple Paths](#section1.2)
+
+## <a name="section0"> Configuration
+
+In order to advertise multiple paths to the specific neighbors, you need to
+configure `[neighbors.add-paths.config]` section for each neighbor.
+In the following example, `send-max = 8` means GoBGP will advertise up to 8
+paths per prefix towards this neighbor and `receive = true` enables to
+receive multiple paths from this neighbor.
+
+```toml
+[[neighbors]]
+  [neighbors.config]
+    neighbor-address = "10.0.0.2"
+    [neighbors.add-paths.config]
+      send-max = 8
+      receive = true
+```
+
+## <a name="section1"> Verification
+
+### <a name="section1.1"> Example Topology and Configuration
+
+To test BGP Additional Paths features, this page supposes the following
+topology.
+
+```
++----------+                    +----------+          +----------+
+| r1       |                    | r2       |          | r3       |
+| AS 65001 |  ADD-PATH enabled  | AS 65002 |          | AS 65003 |
+| 10.0.0.1 |--------------------| 10.0.0.2 |----------| 10.0.0.3 |
++----------+                    +----------+          +----------+
+                                     |
+                                     |
+                                     |
+                                +----------+
+                                | r4       |
+                                | AS 65004 |
+                                | 10.0.0.4 |
+                                +----------+
+```
+
+Configuration on r1:
+
+```toml
+[global.config]
+  as = 65001
+  router-id = "10.0.0.1"
+
+[[neighbors]]
+  [neighbors.config]
+    neighbor-address = "10.0.0.2"
+    peer-as = 65002
+  [neighbors.add-paths.config]
+    receive = true
+    send-max = 8
+  [[neighbors.afi-safis]]
+    [neighbors.afi-safis.config]
+      afi-safi-name = "ipv4-unicast"
+```
+
+Configuration on r2:
+
+```toml
+[global.config]
+  as = 65002
+  router-id = "10.0.0.2"
+
+[[neighbors]]
+  [neighbors.config]
+    neighbor-address = "10.0.0.1"
+    peer-as = 65001
+  [neighbors.add-paths.config]
+    receive = true
+    send-max = 8
+  [[neighbors.afi-safis]]
+    [neighbors.afi-safis.config]
+      afi-safi-name = "ipv4-unicast"
+
+[[neighbors]]
+  [neighbors.config]
+    neighbor-address = "10.0.0.3"
+    peer-as = 65003
+  [[neighbors.afi-safis]]
+    [neighbors.afi-safis.config]
+      afi-safi-name = "ipv4-unicast"
+
+[[neighbors]]
+  [neighbors.config]
+    neighbor-address = "10.0.0.4"
+    peer-as = 65004
+  [[neighbors.afi-safis]]
+    [neighbors.afi-safis.config]
+      afi-safi-name = "ipv4-unicast"
+```
+
+### <a name="section1.2"> Advertise Multiple Paths
+
+Start GoBGP on r1, r2, r3 and r4, and confirm the establishment of each BGP
+session.
+
+e.g.:
+
+```
+r1> gobgpd -f gobgpd.toml
+{"level":"info","msg":"gobgpd started","time":"YYYY-MM-DDTHH:mm:ss+09:00"}
+{"Topic":"Config","level":"info","msg":"Finished reading the config file","time":""YYYY-MM-DDTHH:mm:ss+09:00"}
+{"level":"info","msg":"Peer 10.0.0.2 is added","time":"YYYY-MM-DDTHH:mm:ss+09:00"}
+{"Topic":"Peer","level":"info","msg":"Add a peer configuration for:10.0.0.2","time":"YYYY-MM-DDTHH:mm:ss+09:00"}
+{"Key":"10.0.0.2","State":"BGP_FSM_OPENCONFIRM","Topic":"Peer","level":"info","msg":"Peer Up","time":"YYYY-MM-DDTHH:mm:ss+09:00"}
+```
+
+Advertise a prefix "192.168.1.0/24" on r3 and r4.
+
+```
+r3> gobgp global rib -a ipv4 add 192.168.1.0/24
+```
+
+```
+r4> gobgp global rib -a ipv4 add 192.168.1.0/24
+```
+
+Then confirm 2 paths (from r3 and r4) are advertised to r1 from r2.
+In the following output shows the path with AS_PATH 65002 65003 (r3->r2->r1)
+and the path with AS_PATH 65002 65004 (r4->r2->r1).
+
+```
+r1> gobgp global rib -a ipv4
+   Network              Next Hop             AS_PATH              Age        Attrs
+*> 192.168.1.0/24       10.0.0.2             65002 65003          HH:mm:ss   [{Origin: ?}]
+*  192.168.1.0/24       10.0.0.2             65002 65004          HH:mm:ss   [{Origin: ?}]
+```