summaryrefslogtreecommitdiffhomepage
diff options
context:
space:
mode:
Diffstat
-rw-r--r--tools/yang/bgp-multiprotocol.yang400
-rw-r--r--tools/yang/bgp-operational.yang112
-rw-r--r--tools/yang/bgp-policy.yang801
-rw-r--r--tools/yang/bgp.yang607
-rw-r--r--tools/yang/ietf-inet-types.yang457
-rw-r--r--tools/yang/ietf-netconf-monitoring.yang558
-rw-r--r--tools/yang/ietf-yang-smiv2.yang144
-rw-r--r--tools/yang/ietf-yang-types.yang474
8 files changed, 0 insertions, 3553 deletions
diff --git a/tools/yang/bgp-multiprotocol.yang b/tools/yang/bgp-multiprotocol.yang
deleted file mode 100644
index 2b0a0b29..00000000
--- a/tools/yang/bgp-multiprotocol.yang
+++ /dev/null
@@ -1,400 +0,0 @@
- module bgp-multiprotocol {
-
- yang-version "1";
-
- // namespace
- // TODO: change to an ietf or other more generic namespace
- namespace "http://google.com/yang/google-bgp-multiprotocol-cfg";
-
- prefix "bgp-mp";
-
- // import some basic inet types
- import ietf-inet-types { prefix inet; }
- import bgp-policy { prefix bgp-pol; }
- import bgp-operational { prefix bgp-op; }
-
- // meta
- organization
- "Google, AT&T, BT, Microsoft";
-
- contact
- "Google, Inc.
- 1600 Amphitheatre Way
- Mountain View, CA 94043
-
- AT&T Labs
- 200 S. Laurel Avenue
- Middletown, NJ 07748
-
- BT
- pp. C3L, BT Centre
- 81, Newgate Street
- London EC1A 7AJ
- UK
-
- Microsoft
- 205 108th Ave. NE, Suite 400
- Bellevue, WA 98004";
-
- description
- "This module is part of a YANG model for BGP protocol
- configuration, focusing on configuration of multiprotocol
- BGP, in particular various relevant address families (AFI) and
- sub-address families (SAFI).
- Identities (rather than enumerated types) are used to identify
- each AFI / SAFI type to make it easier for users to extend to
- pre-standard or custom AFI/SAFI types. This module is only
- intended to capture the most";
-
- revision "2014-10-13" {
- description
- "Initial revision";
- reference "TBD";
- }
-
- // extension statements
-
- // feature statements
-
- // identity statements
-
- identity afi-type {
- description
- "base identity type for BGP address family identifiers (AFI)";
- reference "RFC 4760 - Multiprotocol Extensions for BGP-4";
- }
-
- identity safi-type {
- description
- "base identity type for BGP subsequent address family
- identifiers (SAFI)";
- reference "RFC 4760 - Multiprotocol Extensions for BGP-4";
- }
-
- identity ipv4-afi {
- base bgp-mp:afi-type;
- description
- "IPv4 AF identifier (AFI = 1)";
- }
-
- identity ipv6-afi {
- base bgp-mp:afi-type;
- description
- "IPv6 AF identifier (AFI = 2)";
- }
-
- identity unicast-safi {
- base bgp-mp:safi-type;
- description
- "unicast SAFI identifier (SAFI = 1)";
- }
- identity l3vpn-unicast-safi {
- base safi-type;
- description
- "L3 / MPLS virtual private networks SAFI (SAFI = 128/129)";
- reference "RFC 4364 - BGP/MPLS IP Virtual Private Networks
- (VPNs)";
- }
-
- identity labeled-unicast-safi {
- base safi-type;
- description
- "labeled unicast SAFI identifier (SAFI = 4)";
- reference "RFC 3107 - Carrying Label Information in BGP-4";
- }
-
- identity l2vpn-vpls-afi {
- base afi-type;
- description
- "AFI for BGP L2 VPN / VPLS (AFI = 25)";
- reference "RFC 4761 - Virtual Private LAN Service (VPLS)
- Using BGP for Auto-Discovery and Signaling";
- }
-
- identity l2vpn-vpls-safi {
- base safi-type;
- description
- "BGP L2 VPN / VPLS service SAFI (SAFI = 65)";
- }
-
- identity multicast-safi {
- base safi-type;
- description
- "multicast SAFI (SAFI = 2)";
- reference "RFC 4760 - Multiprotocol Extensions for BGP-4";
- }
-
- identity multicast-vpn-safi {
- base safi-type;
- description
- "Multicast VPN SAFI (SAFI = 5)";
- reference "RFC 6514 - BGP Encodings and Procedures for Multicast
- in MPLS/BGP IP VPNs";
- }
-
- // typedef statements
-
- // TODO: move this and other commonly types to a common bgp-types
- // module
- typedef percentage {
- type uint8 {
- range "0..100";
- }
- description
- "Integer indicating a percentage value";
- }
-
- // grouping statements
-
- grouping address-family-common {
- description
- "Configuration that is for the address family level,
- but applies across AFI/SAFI";
-
- container prefix-limit {
- description
- "Configure the maximum number of prefixes that will be
- accepted from a peer.";
-
- leaf max-prefixes {
- type uint32;
- description
- "Maximum number of prefixes that will be accepted from
- the neighbor.";
- }
-
- leaf shutdown-threshold-pct {
- type percentage;
- description
- "Threshold on number of prefixes that can be received
- from a neighbor before generation of warning messages
- or log entries. Expressed as a percentage of
- max-prefixes.";
- }
-
- leaf restart-timer {
- type decimal64 {
- fraction-digits 2;
- }
- units "seconds";
- description
- "Time interval in seconds after which the BGP session
- is reestablished after being torn down due to exceeding
- the max-prefixes limit.";
- }
- }
- // policies can be applied at a specific AF level
- uses bgp-pol:apply-policy-group;
-
- }
-
- grouping ipv4-ipv6-unicast-common {
- description
- "common configuration for base ipv4 and ipv6 unicast; may
- need to be split into separate containers for each of ipv4
- and ipv6";
-
- container ipv4-ipv6-unicast {
- // YANG uses XPath 1.0 expression syntax
- when "(../../afi-name = 'ipv4-afi' or " +
- "../../afi-name = 'ipv6-afi') " +
- "and ../safi-name = 'unicast-safi'" {
- description
- "Include this container for unicast ipv4 or ipv6
- AFI-specific configuration";
- }
- description "ipv4 unicast config items";
-
- leaf send-default-route {
- // TODO: consider moving this to policy
- type boolean;
- default "false";
- description "if set to true, send the default route, i.e.,
- 0.0.0.0/0 to the neighbor(s)";
- }
- }
- }
-
- grouping ipv4-l3vpn-unicast-group {
- description
- "configuration group for L3 VPN VRFs for IPv4";
-
- container ipv4-l3vpn-unicast {
- when "../../afi-name = 'bgp-mp:ipv4-afi' and " +
- "../safi-name = 'l3vpn-unicast-safi'" {
- description
- "Include this container when AFI = ipv4 and
- SAFI = l3vpn-unicast";
- }
- description "ipv4 l3vpn config items";
- list vrfs {
- key name;
- description "list of configured VRFs";
-
- leaf name {
- type string;
- description "name / identifier of the VRF";
- }
-
- leaf route-distinguisher {
- // TODO: consider expanding to a union type to make it more
- // convenient to express as AS:addr or other common formats
- type uint64;
- description
- "route distinguisher value assigned to this VRF";
- }
-
- uses bgp-pol:apply-policy-group;
-
- /* additional leafs to consider --- should these be in BGP?
- interface-name
- retain-local-label-size
- advertise-best-external
- no-synchronization
- */
-
- }
- }
- }
-
- grouping ipv6-l3vpn-unicast-group {
- description
- "configuration group for L3 VPN VRFs for IPv6";
-
- container ipv6-l3vpn-unicast {
- when "../../afi-name = 'bgp-mp:ipv6-afi' and " +
- "../safi-name = 'l3vpn-unicast-safi'" {
- description
- "Include this container only when AFI = ipv6 and
- SAFI = l3vpn-unicast";
- }
- description "ipv6 l3vpn config items";
- }
- }
-
- grouping ipv4-labeled-unicast-group {
- description
- "configuration group for IPv4 labeled unicast";
- container ipv4-labeled-unicast {
- when "../../afi-name = 'ipv4-afi' and " +
- "../safi-name = 'labeled-unicast-safi'" {
- description
- "Include this container when AFI = ipv4 and
- SAFI = labeled-unicast";
- }
- description "ipv4 labeled unicast config items";
- }
- }
-
- grouping l2vpn-group {
- description
- "configuration group for L2 VPN";
-
- container l2vpn {
- // TODO: confirm that both AFI/SAFI values are set
- // for L2 VPNs
- when "../../afi-name = 'l2vpn-vpls-afi' and " +
- "../safi-name = 'l2vpn-vpls-safi'" {
- description
- "Include this container when AFI = l2vpn-vpls and
- SAFI = l2vpn-vpls";
- }
- description "l2vpn config items";
- }
- }
-
- grouping ipv4-multicast-vpn-group {
- description
- "configuration group for IPv4 multicast VPNs";
-
- container ipv4-multicast-vpn {
- when "../../afi-name = 'ipv4-afi' and " +
- "../safi-name = 'multicast-vpn-safi'" {
- description
- "Include this container when AFI = ipv4 and
- SAFI = multicast-vpn";
- }
- description "ipv4 multicast vpn config items";
- }
- }
-
- grouping ipv6-multicast-vpn-group {
- description
- "configuration group for IPv6 multicast VPNs";
-
- container ipv6-multicast-vpn {
- when "../../afi-name = 'ipv6-afi' and " +
- "../safi-name = 'multicast-vpn-safi'" {
- description
- "Include this container when AFI = ipv6 and
- SAFI = multicast-vpn";
- }
- description "ipv6 multicast vpn config items";
- }
- }
-
- grouping address-family-configuration {
- description "Configuration options that are applied at the
- address family level.";
-
- list afi {
-
- key "afi-name";
- description
- "Per address-family configuration, uniquely identified by AF
- name.";
- leaf afi-name {
- type identityref {
- base "afi-type";
- }
- description
- "Address family names are drawn from the afi-type base
- identity, which has specific address family types as
- derived identities.";
- }
-
- list safi {
- key "safi-name";
- description
- "Per subsequent address family configuration, under a
- specific address family.";
-
- leaf safi-name {
- type identityref {
- base "safi-type";
- }
- description
- "Within each address family, subsequent address family
- names are drawn from the subsequent-address-family base
- identity.";
- }
-
- // these grouping references conditionally add config nodes
- // that are specific to each AFI / SAFI combination
- uses ipv4-ipv6-unicast-common;
- uses ipv4-l3vpn-unicast-group;
- uses ipv6-l3vpn-unicast-group;
- uses ipv4-labeled-unicast-group;
- uses l2vpn-group;
- uses ipv4-multicast-vpn-group;
- uses ipv6-multicast-vpn-group;
-
- // this grouping pulls in the config items common across
- // AF/SAFI combinations
- uses address-family-common;
-
- }
- // operational state common acrossr address families
- uses bgp-op:bgp-op-af-group;
- }
- }
-
- // data definition statements
-
- // augment statements
-
- // rpc statements
-
- // notification statements
-
- } \ No newline at end of file
diff --git a/tools/yang/bgp-operational.yang b/tools/yang/bgp-operational.yang
deleted file mode 100644
index f7e7a5e4..00000000
--- a/tools/yang/bgp-operational.yang
+++ /dev/null
@@ -1,112 +0,0 @@
- module bgp-operational {
-
- yang-version "1";
-
- // namespace
- // TODO: change to an ietf or other more generic namespace
- namespace "http://google.com/yang/google-bgp-operational";
-
- prefix "bgp-op";
-
- // import some basic inet types
- import ietf-inet-types { prefix inet; }
- // meta
-
- organization
- "Google, AT&T, BT, Microsoft";
-
- contact
- "Google, Inc.
- 1600 Amphitheatre Way
- Mountain View, CA 94043
-
- AT&T Labs
- 200 S. Laurel Avenue
- Middletown, NJ 07748
-
- BT
- pp. C3L, BT Centre
- 81, Newgate Street
- London EC1A 7AJ
- UK
-
- Microsoft
- 205 108th Ave. NE, Suite 400
- Bellevue, WA 98004";
-
- description
- "This module is part of a YANG model for BGP protocol
- configuration, focusing on operational data (i.e., state
- variables) related to BGP operations";
-
- revision "2014-10-13" {
- description
- "Initial revision";
- reference "TBD";
- }
-
- // extension statements
-
- // feature statements
-
- // identity statements
-
- // typedef statements
-
- // grouping statements
-
- grouping bgp-op-global-group {
- description
- "top level container for operational state data";
-
- container bgp-global-state {
- config false;
- description
- "data definitions for operational state variables related
- to the global BGP instance";
- }
- }
-
- grouping bgp-op-af-group {
- description
- "top level container for operational state data";
-
- container bgp-af-common-state {
- config false;
- description
- "data definitions for operational state variables related
- to all BGP address families instance";
- }
- }
-
- grouping bgp-op-peergroup-group {
- description
- "top level container for operational state data";
-
- container bgp-group-common-state {
- config false;
- description
- "data definitions for operational state variables related
- to BGP peer groups";
- }
- }
-
- grouping bgp-op-neighbor-group {
- description
- "top level container for operational state data";
-
- container bgp-neighbor-common-state {
- config false;
- description
- "data definitions for operational state variables related
- to BGP neighbor sesions";
- }
- }
-
- // data definition statements
- // augment statements
-
- // rpc statements
-
- // notification statements
- } \ No newline at end of file
diff --git a/tools/yang/bgp-policy.yang b/tools/yang/bgp-policy.yang
deleted file mode 100644
index 8ed3d411..00000000
--- a/tools/yang/bgp-policy.yang
+++ /dev/null
@@ -1,801 +0,0 @@
- module bgp-policy {
-
- yang-version "1";
-
- // namespace
- // TODO: change to an ietf or other generic namespace
- namespace "http://google.com/yang/google-bgp-policy-cfg";
-
- prefix "bgp-policy";
-
- // import some basic types
- import ietf-inet-types { prefix inet; }
-
- // meta
- // TODO: add collaborating organizations
- organization
- "Google, AT&T, BT, Microsoft";
-
- contact
- "Google, Inc.
- 1600 Amphitheatre Way
- Mountain View, CA 94043
-
- AT&T Labs
- 200 S. Laurel Avenue
- Middletown, NJ 07748
-
- BT
- pp. C3L, BT Centre
- 81, Newgate Street
- London EC1A 7AJ
- UK
-
- Microsoft
- 205 108th Ave. NE, Suite 400
- Bellevue, WA 98004";
-
- description
- "This module describes a YANG model for BGP policy
- configuration. It is a limited subset of all of the policy
- configuration parameters available in the variety of vendor
- implementations, but supports widely used constructs for managing
- how BGP routes are imported, exported, and modified. This module
- works with the base BGP protocol configuration model defined in
- google-bgp.
-
- Route policy expression:
-
- Policies are expressed as a set of top-level policy definitions,
- each of which consists of a sequence of policy statements.
- Policy statements are simple condition-action tuples. Conditions
- may include mutiple match or comparison operations, and similarly
- actions may be multitude of changes to route attributes and a
- final disposition of accepting or> rejecting the route.
-
- BGP
- |
- +->policy
- +-> policy definitions
- +-> policy statements
- +-> conditions
- +-> [ match conditions / comparison conditions ]
- +-> actions
- +-> [ set attribute actions / control-flow actions ]
-
- Route policy evaluation:
-
- Evaluation of a policy definition is expected to proceed by
- evaluating the individual policy statements in the specified
- order. When a condition statement in a policy statement is
- satisfied, the corresponding action statement is executed.
- If the action statement has either accept-route or reject-route
- actions, policy evaluation stops. If the condition is not
- satisfied, or if the action statement contains goto-next, then
- evaluation proceeds to the next policy statement. If none of the
- policy statement conditions are satisfied, then the default
- action is applied.
-
- Policy 'subroutines' are supported by allowing condition
- statements to reference another policy definition which first
- applies conditions from the referenced policy before
- proceeding.";
-
- revision "2014-09-30" {
- description
- "Initial revision";
- reference "TBD";
- }
-
- // extension statements
- // feature statements
-
- // identity statements
-
- identity bgp-attribute-comparison {
- description
- "base type for supported comparison operators on route
- attributes";
- }
-
- identity attribute-eq {
- base bgp-attribute-comparison;
- description "== comparison";
- }
-
- identity attribute-ge {
- base bgp-attribute-comparison;
- description ">= comparison";
- }
-
- identity attribute-le {
- base bgp-attribute-comparison;
- description "<= comparison";
- }
-
- // typedef statements
-
- typedef match-set-options-type {
- type enumeration {
- enum ANY {
- description "match is true if given value matches any member
- of the defined set";
- }
- enum ALL {
- description "match is true if each given value matches a
- member of the defined set";
- }
- enum INVERT {
- description "match is true if given value does not match any
- member of the defined set";
- }
- }
- default ANY;
- description
- "Options that govern the behavior of a match statement. The
- default behavior is ANY, i.e., the given value matches any
- of the members of the defined set";
- }
-
- typedef as-path-prepend-option-repeat {
- type uint32;
- description
- "Option for the as-prepend policy action. Prepends the local
- AS number repeated n times";
- }
-
- typedef well-known-community-attr {
- type enumeration {
- enum INTERNET {
- description "entire Internet community (0x00000000)";
- }
- enum NO_EXPORT {
- // value 0xFFFFFF01;
- description "no export";
- }
- enum NO_ADVERTISE {
- description "no advertise (0xFFFFFF02)";
- }
- enum NO_EXPORT_SUBCONFED {
- description "no export subconfed, equivalent to
- local AS (0xFFFFFF03)";
- }
- }
- description
- "Type definition for well-known IETF community attribute
- values";
- reference "RFC 1997 - BGP Communities Attribute";
- }
-
- typedef std-community-attr-type {
- // TODO: further refine restrictions and allowed patterns
- // 4-octet value:
- // <as number> 2 octets
- // <community value> 2 octets
- type union {
- type uint32 {
- // per RFC 1997, 0x00000000 - 0x0000FFFF and 0xFFFF0000 -
- // 0xFFFFFFFF are reserved
- range "65536..4294901759"; // 0x00010000..0xFFFEFFFF
- }
- type string {
- pattern '([0-9]+:[0-9]+)';
- }
- }
- description
- "Type definition for standard commmunity attributes";
- reference "RFC 1997 - BGP Communities Attribute";
- }
-
- typedef ext-community-attr-type {
- // TODO: needs more work to make this more precise given the
- // variability of extended community attribute specifications
- // 8-octet value:
- // <type> 2 octects
- // <value> 6 octets
- type string {
- pattern '([0-9\.]+(:[0-9]+)?:[0-9]+)';
- }
- description
- "Type definition for extended community attributes";
- reference "RFC 4360 - BGP Extended Communities Attribute";
- }
-
- typedef community-regexp-type {
- // TODO: needs more work to decide what format these regexps can
- // take.
- type string;
- description
- "Type definition for communities specified as regular
- expression patterns";
- }
-
- typedef bgp-origin-attr-type {
- type enumeration {
- enum IGP {
- value 0;
- description "Origin of the NLRI is internal";
- }
- enum EGP {
- value 1;
- description "Origin of the NLRI is EGP";
- }
- enum INCOMPLETE {
- value 2;
- description "Origin of the NLRI is neither IGP or EGP";
- }
- }
- description
- "Type definition for standard BGP origin attribute";
- reference "RFC 4271 - A Border Gateway Protocol 4 (BGP-4),
- Sec 4.3";
- }
- typedef set-community-option-type {
- type enumeration {
- enum ADD {
- description "add the specified communities to the existing
- community attribute";
- }
- enum REMOVE {
- description "remove the specified communities from the
- existing community attribute";
- }
- enum REPLACE {
- description "replace the existing community attribute with
- the specified communities";
- }
- enum NULL {
- description "set the community attribute to empty / NULL";
- }
- }
- description
- "Type definition for options when setting the community
- attribute in a policy action";
- }
-
- typedef bgp-next-hop-type {
- type union {
- type inet:ip-address;
- type enumeration {
- enum SELF {
- description "special designation for local router's own
- address";
- }
- }
- }
- description "type definition for specifying next-hop in policy
- actions";
- }
-
- // grouping statements
-
- grouping defined-sets-definitions {
- description
- "Data definitions for pre-defined sets of attributes used in
- policy match conditions";
-
- list prefix-set {
- key prefix-set-name;
- description
- "Definitions for prefix sets";
-
- leaf prefix-set-name {
- type string;
- description
- "name / label of the prefix set -- this is used to
- reference the set in match conditions";
- }
-
- list prefix {
- key "address masklength masklength-range";
- description
- "list of prefix expressions that are part of the set";
-
- leaf address {
- type inet:ip-address;
- mandatory true;
- description
- "address portion of the prefix";
- }
-
- leaf masklength {
- type uint8 {
- // simple range covers both ipv4 and ipv6 --
- // could separate this into different types
- // for IPv4 and IPv6 prefixes
- range 1..128;
- }
- mandatory true;
- description
- "masklength for the prefix specification";
- }
-
- leaf masklength-range {
- type string {
- // pattern modeled after ietf-inet-types
- pattern '(([0-9])|([1-9][0-9])|(1[0-1][0-9])|'
- + '(12[0-8]))\.\.'
- + '(([0-9])|([1-9][0-9])|(1[0-1][0-9])|'
- + '(12[0-8]))';
- }
- description
- "Defines an optional range for the masklength. Absence
- of the masklength-length implies that the prefix has an
- exact masklength given by the masklength parameter.
- Example: 10.3.192.0/21 through 10.3.192.0/24 would be
- expressed as address: 10.3.192.0, masklength: 21,
- masklength-range: 21..24";
- }
- }
- }
-
- list community-set {
- key community-set-name;
- description
- "Definitions for community sets";
-
- leaf community-set-name {
- type string;
- mandatory true;
- description
- "name / label of the community set -- this is used to
- reference the set in match conditions";
- }
-
- leaf-list community-members {
- type union {
- type std-community-attr-type;
- type community-regexp-type;
- type well-known-community-attr;
- }
- description
- "members of the community set";
- }
-
- }
-
- list ext-community-set {
- key ext-community-set-name;
- description
- "Definitions for extended community sets";
-
- leaf ext-community-set-name {
- type string;
- description
- "name / label of the extended community set -- this is used
- to reference the set in match conditions";
- }
-
- leaf-list ext-community-members {
- type union {
- type ext-community-attr-type;
- // TODO: is regexp support needed for extended communities?
- // TODO: is well-known needed for extended communities?
- type community-regexp-type;
- }
- description
- "members of the extended community set";
- }
- }
-
- list as-path-set {
- key as-path-set-name;
- description
- "Definitions for AS path sets";
-
- leaf as-path-set-name {
- type string;
- description
- "name of the AS path set -- this is used to reference the
- the set in match conditions";
- }
-
- leaf-list as-path-set-members {
- // TODO: need to refine typedef for AS path expressions
- type string;
- description
- "AS path expression -- list of ASes in the set";
- }
-
- }
- }
-
- grouping condition-set-matches {
- description
- "Condition statement definitions for checking membership in a
- defined set";
-
- leaf match-community-set {
- type leafref {
- path "/bgp/policy/defined-sets/community-set/community-set-name";
- require-instance true;
- }
- description
- "References a defined community set";
- }
-
- leaf match-ext-community-set {
- type leafref {
- path "/bgp/policy/defined-sets/ext-community-set"
- + "/ext-community-set-name";
- }
- description "References a defined extended community set";
- }
- leaf match-as-path-set {
- type leafref {
- path "/bgp/policy/defined-sets/as-path-set/as-path-set-name";
- }
- description "References a defined AS path set";
- }
-
- leaf match-prefix-set {
- type leafref {
- path "/bgp/policy/defined-sets/prefix-set/prefix-set-name";
- }
- description "References a defined prefix set";
- }
-
- leaf match-set-options {
- type match-set-options-type;
- description
- "Optional parameter that governs the behavior of the match
- operation";
- }
- }
-
- grouping condition-attribute-compare-operators {
- description "common definitions for comparison operations in
- condition statements";
-
- leaf operator {
- type identityref {
- base bgp-attribute-comparison;
- }
- description
- "type of comparison to be performed";
- }
-
- leaf value {
- type uint32;
- description
- "value to compare with the community count";
- }
- }
-
- grouping condition-attribute-comparisons {
- description
- "Condition statement definitions for comparing a route
- attribute to a specified value";
-
- leaf med-eq {
- type uint32;
- description
- "Condition to check if the received MED value is equal to
- the specified value";
- }
-
- leaf origin-eq {
- type bgp-origin-attr-type;
- description
- "Condition to check if the route origin is equal to the
- specified value";
- }
-
- leaf-list next-hop-in {
- type inet:ip-address;
- description
- "List of next hop addresses to check for in the route
- update";
- }
-
- leaf local-pref-eq {
- type uint32;
- // TODO: add support for other comparisons
- description
- "Condition to check if the local pref attribute is equal to
- the specified value";
- }
-
- container community-count {
-
- presence "node is present in the config data to indicate a
- community-count condition";
-
- description
- "Value and comparison operations for conditions based on the
- number of communities in the route update";
-
- uses condition-attribute-compare-operators;
-
- }
-
- container as-path-length {
-
- presence "node is present in the config data to indicate a
- as-path-length condition";
-
- description
- "Value and comparison operations for conditions based on the
- length of the AS path in the route update";
- uses condition-attribute-compare-operators;
- }
-
- leaf route-type {
- // TODO: verify extent of vendor support for this comparison
- type enumeration {
- enum INTERNAL {
- description "route type is internal";
- }
- enum EXTERNAL {
- description "route type is external";
- }
- }
- description
- "Condition to check the route type in the route update";
- }
- }
-
- grouping set-attribute-actions {
- description
- "Definitions for base set of policy action statements that
- change various attributes of the route";
-
- container set-as-path-prepend {
-
- presence "node is present in the config data to use the AS
- prepend action";
- description
- "action to prepend local AS number to the AS-path a
- specified number of times";
-
- leaf repeat-n {
- type uint8;
- description "number of times to prepend the local AS number";
- }
- }
-
- container set-community {
-
- presence "node is present in the config data when set-community
- action is used";
- description
- "action to set the community attributes of the route, along
- with options to modify how the community is modified";
-
- leaf-list communities {
- type union {
- type std-community-attr-type;
- type well-known-community-attr;
- }
- description
- "community values for the update";
- }
-
- leaf options {
- type set-community-option-type;
- description
- "options for modifying the community attribute with the
- specified values";
- }
- }
-
- container set-ext-community {
-
- presence "node is present in the config data when set-community
- action is used";
- description
- "action to set the extended community attributes of the
- route, along with options to modify how the community is
- modified";
-
- leaf-list communities {
- type union {
- type ext-community-attr-type;
- type well-known-community-attr;
- }
- description
- "community values for the update";
- }
-
- leaf options {
- type set-community-option-type;
- description
- "options for modifying the community attribute with the
- specified values";
- }
- }
-
- leaf set-route-origin {
- type bgp-origin-attr-type;
- description "set the origin attribute to the specified value";
- }
-
- leaf set-local-pref {
- type uint32;
- description "set the local pref attribute on the route update";
- }
-
- leaf set-next-hop {
- type bgp-next-hop-type;
- description "set the next-hop attribute in the route update";
- }
-
- leaf set-med {
- type uint32;
- description "set the med metric attribute in the route update";
- }
- }
-
- grouping control-flow-actions {
- description
- "Definitions for base set of policy action statements that
- manage the disposition or control flow of the policy";
-
- leaf accept-route {
- type empty;
- description "accepts the route into the routing table";
- }
-
- leaf reject-route {
- type empty;
- description "rejects the route";
- }
-
- leaf goto-next {
- type empty;
- description
- "proceed to evaluate the next policy statement in the
- policy definition";
- }
-
- leaf goto-policy {
- type string;
- description
- "proceed to the named policy definition and continue
- evaluating the policy";
- }
-
- }
-
- grouping conditions {
- description
- "Condition statement definitions for policy statements";
- leaf call-policy {
- type string;
- description
- "Applies the conditions from the specified policy definition
- in the current policy statement.";
- }
-
- uses condition-set-matches;
- uses condition-attribute-comparisons;
-
- }
-
- grouping actions {
- description
- "Action statement definitions for policy statements";
-
- uses set-attribute-actions;
- uses control-flow-actions;
-
- }
-
- grouping apply-policy-group {
- description
- "top level configuration for applying policies at various
- points in the configuration hierarchy";
-
- container apply-policy {
- description
- "Anchor point for policies in the BGP configuration. Import
- and export policies are with respect to the local routing
- table, i.e., export (send) and import (receive).";
-
- leaf-list import-policies {
- type leafref {
- path "/bgp/policy/policy-definitions/policy-definition"
- + "/name";
- require-instance true;
- }
- description
- "list of policy names in sequence to be applied on
- receiving a routing update in the current context, e.g.,
- for the current peer group, neighbor, address family,
- etc.";
- }
-
- leaf-list export-policies {
- type leafref {
- path "/bgp/policy/policy-definitions/policy-definition"
- + "/name";
- require-instance true;
- }
- description
- "list of policy names in sequence to be applied on
- sending a routing update in the current context, e.g.,
- for the current peer group, neighbor, address family,
- etc.";
- }
- }
- }
-
- grouping policy-definition-group {
- description
- "top level set of policy defined sets and policy definitions";
-
- container policy {
- description
- "Top level container for BGP policy-related configuration
- items";
-
- container defined-sets {
- presence "Container for sets defined for matching in policy
- statements";
- description
- "Predefined sets of attributes used in policy match
- statements";
-
- uses defined-sets-definitions;
- }
-
- container policy-definitions {
- presence "Container for the set of policy definitions";
- description
- "Top level container for policy definitions";
-
- list policy-definition {
- key name;
- ordered-by user;
- description
- "List of top-level policy definitions, keyed by a unique
- name";
-
- leaf name {
- type string;
- description
- "Name of the top-level policy definition -- this name
- is used in references to the current policy";
- }
-
- list statements {
- key name;
- // TODO: names of policy statements withing a policy defn
- // should be optional, however, YANG requires a unique id
- // for lists; not sure that a compound key works either;
- // need to investigate further.
- ordered-by user;
- description
- "Name of this policy statement";
-
- leaf name {
- type string;
- description "name of the policy statement";
- }
-
- container conditions {
- description "Condition statements for this
- policy statement";
-
- uses conditions;
- }
-
- container actions {
- description "Action statements for this policy
- statement";
-
- uses actions;
- }
- }
- }
- }
- }
- }
-
- // augment statements
-
- // rpc statements
-
- // notification statements
-
- } \ No newline at end of file
diff --git a/tools/yang/bgp.yang b/tools/yang/bgp.yang
deleted file mode 100644
index c6257b5e..00000000
--- a/tools/yang/bgp.yang
+++ /dev/null
@@ -1,607 +0,0 @@
- module bgp {
-
- yang-version "1";
-
- // namespace
- // TODO: change to an ietf or other more generic namespace
- namespace "http://google.com/yang/google-bgp-protocol-cfg";
-
- prefix "bgp";
-
- // import some basic inet types
- import ietf-inet-types { prefix inet; }
- import bgp-multiprotocol { prefix bgp-mp; }
- import bgp-policy { prefix bgp-pol; }
- import bgp-operational { prefix bgp-op; }
-
- // meta
- organization
- "Google, AT&T, BT, Microsoft";
-
- contact
- "Google, Inc.
- 1600 Amphitheatre Way
- Mountain View, CA 94043
-
- AT&T Labs
- 200 S. Laurel Avenue
- Middletown, NJ 07748
-
- BT
- pp. C3L, BT Centre
- 81, Newgate Street
- London EC1A 7AJ
- UK
-
- Microsoft
- 205 108th Ave. NE, Suite 400
- Bellevue, WA 98004";
-
- description
- "This module describes a YANG model for BGP protocol
- configuration.It is a limited subset of all of the configuration
- parameters available in the variety of vendor implementations,
- hence it is expected that it would be augmented with vendor-
- specific configuration data as needed.Additional modules or
- submodules to handle other aspects of BGP configuration,
- including policy, VRFs, VPNs, and additional address families
- are also expected.
-
- This model supports the following BGP configuration level
- hierarchy:
-
- BGP
- |
- +-> [ global BGP configuration ]
- +-> AFI / SAFI (address family)
- +-> [AFI-specific config ]
- +-> peer group
- +-> [ peer group config ]
- +-> AFI / SAFI [ per-AFI overrides ]
- +-> neighbor
- +-> [ per-neighbor overrides ]
- +-> AFI / SAFI [ per-AFI overrides ]
- +-> neighbor
- +-> [ neighbor config ]
- +-> AFI / SAFI [ per-AFI overrides ]";
-
- revision "2014-09-30" {
- description
- "Initial revision";
- reference "TBD";
- }
-
- typedef peer-type {
- type enumeration {
- enum INTERNAL {
- description "internal (iBGP) peer";
- }
- enum EXTERNAL {
- description "external (eBGP) peer";
- }
- }
- description
- "labels a peer or peer group as explicitly internal or
- external";
- }
-
- typedef remove-private-as-option {
- type enumeration {
- enum ALL {
- description "remove all private ASes in the path";
- }
- enum REPLACE {
- description "replace private ASes with local AS";
- }
- }
- description
- "set of options for configuring how private AS path numbers
- are removed from advertisements";
- }
-
- typedef percentage {
- type uint8 {
- range "0..100";
- }
- description
- "Integer indicating a percentage value";
- }
-
- typedef rr-cluster-id-type {
- type union {
- type uint32;
- type inet:ipv4-address;
- }
- description
- "union type for route reflector cluster ids:
- option 1: 4-byte number
- option 2: IP address";
- }
-
- grouping bgp-common-configuration {
- description "Common configuration available at all hierarchy
- levels, global, AFI, groups, neighbors, etc.";
-
- leaf description {
- type string;
- description
- "An optional textual description (intended primarily for use
- with a peer or group";
- }
-
- container route-selection-options {
- // TODO: consider moving this container to AFI/SAFI level
- // config
- description
- "Set of configuration options that govern best
- path selection.";
- leaf always-compare-med {
- type boolean;
- default "false";
- description
- "Compare multi-exit discriminator (MED) value from
- different ASes when selecting the best route. The
- default behavior is to only compare MEDs for paths
- received from the same AS.";
- }
-
- leaf ignore-as-path-length {
- type boolean;
- default "false";
- description
- "Ignore the AS path length when selecting the best path.
- The default is to use the AS path length and prefer paths
- with shorter length.";
- }
-
- leaf external-compare-router-id {
- type boolean;
- default "true";
- description
- "When comparing similar routes received from external
- BGP peers, use the router-id as a criterion to select
- the active path.";
- }
-
- leaf advertise-inactive-routes {
- type boolean;
- default "false";
- description
- "Advertise inactive routes to external peers. The
- default is to only advertise active routes.";
- }
-
- leaf enable-aigp {
- type empty;
- description
- "Flag to enable sending / receiving accumulated IGP
- attribute in routing updates";
- }
- }
-
- container use-multiple-paths {
-
- presence
- "Presence of this container indicates that multipath
- is enabled for both eBGP and iBGP, absence indicates
- that multi-path is not used";
-
- description
- "Configuration of BGP multi-path for iBGP and eBGP";
-
- container ebgp {
- description
- "Configuration of BGP multipath to enable load sharing
- across multiple paths to eBGP peers";
-
- leaf allow-multiple-as {
- type boolean;
- default "false";
- description
- "Allow multipath to use paths from different neighbouring
- ASes. The default is to only consider multiple paths from
- the same neighbouring AS.";
- }
-
- leaf maximum-paths {
- type uint32;
- default 1;
- description
- "Maximum number of parallel paths to consider when using
- BGP multipath. The default is use a single path.";
- }
- }
-
- container ibgp {
- description
- "Configuration of BGP multipath to enable load-sharing
- across multiple paths to iBGP peers";
-
- leaf maximum-paths {
- type uint32;
- default 1;
- description
- "Maximum number of parallel paths to consider when using
- iBGP multipath. The default is to use a single path";
- }
- }
-
- container eibgp {
- description
- "Configuration of BGP multipath to enable load-sharing
- across multiple paths to external confederation sub-ASes";
- leaf maximum-paths {
- type uint32;
- default 1;
- description
- "Maximum number of parallel paths to consider when using
- eiBGP multipath. The default is to use a single path";
- }
-
- }
- }
-
- container graceful-restart {
- // TODO: most impls seem to require this at the global level
- // in order to specify at neighbor or other levels
- presence "Presence of this item indicates that BGP graceful
- restart is enabled.";
-
- description
- "Configures BGP graceful restart, which is a negotiated
- option that indicates that a BGP speaker is able to retain
- forwarding state when a BGP session restarts";
-
- reference "RFC 4724: Graceful Restart Mechanism for BGP";
-
- leaf restart-time {
- type uint16 {
- range 0..4096;
- }
- description
- "Estimated time in seconds for the BGP session to be
- re-established after a restart. This is a 12-bit value
- advertised by the router to peers. Per RFC 4724, the
- suggested default value is <= the hold-time value";
- }
-
- leaf stale-routes-time {
- type decimal64 {
- fraction-digits 2;
- }
- description
- "Sets an upper bound on the time in seconds that stale
- routes will be retained by the router after a session is
- restarted";
- }
- }
-
- uses bgp-pol:apply-policy-group;
- }
-
- grouping bgp-global-configuration {
- description
- "Grouping for global level configuration items";
-
- leaf as {
- type inet:as-number;
- mandatory "true";
- description
- "Local autonomous system number of the router. Uses
- the 32-bit as-number type from the model in RFC 6991";
- }
- leaf router-id {
- type inet:ipv4-address;
- description
- "Router id of the router, expressed as an
- 32-bit value, IPv4 address.";
- }
-
- container default-route-distance {
- description
- "Administrative distance (or preference) assigned to
- routes received from different sources
- (external, internal, and local).";
- leaf external-route-distance {
- type uint8 {
- range "1..255";
- }
- description
- "Administrative distance for routes learned from external
- BGP (eBGP).";
- }
- leaf internal-route-distance {
- type uint8 {
- range "1..255";
- }
- description
- "Administrative distance for routes learned from internal
- BGP (iBGP).";
- }
- }
-
- container confederation {
-
- presence "Presence of this node indicates that the local AS
- is part of a confederation";
- description
- "Configuration for a BGP confederation consisting of a
- confed id and member sub-AS list";
-
- leaf identifier {
- type inet:as-number;
- description
- "Confederation identifier for the autonomous system";
- }
-
- leaf-list member-as {
- type inet:as-number;
- description
- "Remote autonomous systems that are to be treated
- as part of the local confederation.";
- }
- }
-
- }
-
- grouping bgp-group-common-configuration {
- description "Configuration items that are applied at the peer
- group level";
-
- // currently a placeholder in case we identify config that is
- // really only applicable at the group level
- }
-
- grouping bgp-group-neighbor-common-configuration {
- description "Configuration items that are applied at the peer
- or peer group levels";
-
- leaf auth-password {
- type string;
- description
- "Configures an MD5 authentication password for use with
- neighboring devices.";
- }
-
- leaf peer-type {
- type peer-type;
- description
- "Explicitly designate the peer or peer group as internal
- (iBGP) or external (eBGP).";
- }
-
- container timers {
- description "Configuration of various BGP timers";
- leaf connect-retry {
- type decimal64 {
- fraction-digits 2;
- }
- default 30;
- description
- "Time interval in seconds between attempts to establish a
- session with the peer.";
- }
-
- leaf hold-time {
- type decimal64 {
- fraction-digits 2;
- }
- default 90;
- description
- "Time interval in seconds that a BGP session will be
- considered active in the absence of keepalive or other
- messages from the peer. The hold-time is typically
- set to 3x the keepalive-interval.";
- reference
- "RFC 4271 - A Border Gateway Protocol 4, Sec. 10";
- }
-
- leaf keepalive-interval {
- type decimal64 {
- fraction-digits 2;
- }
- default 30;
- description
- "Time interval in seconds between transmission of keepalive
- messages to the neighbor. Typically set to 1/3 the
- hold-time.";
- }
-
- leaf minimum-advertisement-interval {
- type decimal64 {
- fraction-digits 2;
- }
- default 30;
- description
- "Mininum time interval in seconds between transmission
- of BGP updates to neighbors";
- reference
- "RFC 4271 - A Border Gateway Protocol 4, Sec 10";
- }
-
- leaf send-update-delay {
- type decimal64 {
- fraction-digits 2;
- }
- description
- "Time interval between routes changing in the routing
- table and corresponding updates sent to neighbors --
- serves to batch updates";
- }
-
- }
-
- container ebgp-multihop {
- description
- "Configure multihop BGP for peers that are not directly
- connected";
-
- leaf multihop-ttl {
- type uint8;
- default 1;
- description
- "Time-to-live for multihop BGP sessions. The default
- value of 1 is for directly connected peers (i.e.,
- multihop disabled";
-
- }
-
- }
-
- container route-reflector {
- description
- "Configure the local router as a route-reflector
- server";
-
- leaf route-reflector-cluster-id {
- type rr-cluster-id-type;
- description
- "route-reflector cluster id to use when local router is
- configured as a route reflector. Commonly set at the group
- level, but allows a different cluster
- id to be set for each neighbor.";
- }
-
- leaf route-reflector-client {
- type boolean;
- default "false";
- description
- "Configure the neighbor as a route reflector client.";
- }
- }
-
- leaf remove-private-as {
- // could also make this a container with a flag to enable
- // remove-private and separate option. here, option implies
- // remove-private is enabled.
- type remove-private-as-option;
- description
- "Remove private AS numbers from updates sent to peers.";
- }
-
- container bgp-logging-options {
- description
- "Configure various tracing/logging options for BGP peers
- or groups. Expected that additional vendor-specific log
- options would augment this container.";
-
- leaf log-neighbor-state-changes {
- type boolean;
- default "true";
- description
- "Configure logging of peer state changes. Default is
- to enable logging of peer state changes.";
- }
- }
-
- container transport-options {
- description
- "Transport protocol options for BGP sessions";
-
- leaf tcp-mss {
- type uint16;
- description
- "Sets the max segment size for BGP TCP sessions.";
- }
-
- leaf mtu-discovery {
- type boolean;
- description
- "Turns path mtu discovery for BGP TCP sessions on (true)
- or off (false)";
- }
-
- leaf passive-mode {
- type boolean;
- description
- "Wait for peers to issue requests to open a BGP session,
- rather than initiating sessions from the local router.";
- }
- }
-
- leaf local-address {
- type inet:ip-address;
- description
- "Set the local IP (either IPv4 or IPv6) address to use for
- the session when sending BGP update messages.";
- }
-
- leaf route-flap-damping {
- type boolean;
- description
- "Enable route flap damping.";
- }
- }
-
- grouping bgp-neighbor-configuration {
- description
- "Neighbor-level configuration items";
-
- list neighbor {
- key "neighbor-address";
- description
- "List of BGP peers, uniquely identified by neighbor
- address.";
- leaf neighbor-address {
- type inet:ip-address;
- description
- "Address of the BGP peer, either IPv4 or IPv6.";
- }
-
- leaf peer-as {
- type inet:as-number;
- mandatory "true";
- description
- "AS number of the peer.";
-
- }
- uses bgp-common-configuration;
- uses bgp-mp:address-family-configuration;
- uses bgp-group-neighbor-common-configuration;
- uses bgp-op:bgp-op-neighbor-group;
- }
- }
-
- container bgp {
- description "Top-level configuration data for the BGP router";
-
- container global {
- description
- "Top-level bgp protocol options applied at the global level
- in the hierarchy -- these apply across peer-groups,
- neighbors, and address families";
-
- uses bgp-global-configuration;
-
- // attach global level operational data
- uses bgp-op:bgp-op-global-group;
- }
-
- // top level AF configuration
- uses bgp-mp:address-family-configuration;
-
- list peer-group {
- key "group-name";
- description
- "List of peer-groups, uniquely identified by the peer group
- name.";
- leaf group-name {
- type string;
- description "Name of the peer group.";
- }
- uses bgp-op:bgp-op-peergroup-group;
- uses bgp-common-configuration;
- uses bgp-mp:address-family-configuration;
- uses bgp-group-neighbor-common-configuration;
-
- // list of configurations for neighbors in this peer group
- uses bgp-neighbor-configuration;
- }
-
- // top level neighbor configuration
- uses bgp-neighbor-configuration;
-
- // hook for top-level policy definitions
- uses bgp-pol:policy-definition-group;
- }
- } \ No newline at end of file
diff --git a/tools/yang/ietf-inet-types.yang b/tools/yang/ietf-inet-types.yang
deleted file mode 100644
index 5c6f139a..00000000
--- a/tools/yang/ietf-inet-types.yang
+++ /dev/null
@@ -1,457 +0,0 @@
-module ietf-inet-types {
-
- namespace "urn:ietf:params:xml:ns:yang:ietf-inet-types";
- prefix "inet";
-
- organization
- "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
- contact
- "WG Web: <http://tools.ietf.org/wg/netmod/>
- WG List: <mailto:netmod@ietf.org>
-
- WG Chair: David Kessens
- <mailto:david.kessens@nsn.com>
-
- WG Chair: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>
-
- Editor: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>";
-
- description
- "This module contains a collection of generally useful derived
- YANG data types for Internet addresses and related things.
-
- Copyright (c) 2013 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC 6991; see
- the RFC itself for full legal notices.";
-
- revision 2013-07-15 {
- description
- "This revision adds the following new data types:
- - ip-address-no-zone
- - ipv4-address-no-zone
- - ipv6-address-no-zone";
- reference
- "RFC 6991: Common YANG Data Types";
- }
-
- revision 2010-09-24 {
- description
- "Initial revision.";
- reference
- "RFC 6021: Common YANG Data Types";
- }
-
- /*** collection of types related to protocol fields ***/
-
- typedef ip-version {
- type enumeration {
- enum unknown {
- value "0";
- description
- "An unknown or unspecified version of the Internet
- protocol.";
- }
- enum ipv4 {
- value "1";
- description
- "The IPv4 protocol as defined in RFC 791.";
- }
- enum ipv6 {
- value "2";
- description
- "The IPv6 protocol as defined in RFC 2460.";
- }
- }
- description
- "This value represents the version of the IP protocol.
-
- In the value set and its semantics, this type is equivalent
- to the InetVersion textual convention of the SMIv2.";
- reference
- "RFC 791: Internet Protocol
- RFC 2460: Internet Protocol, Version 6 (IPv6) Specification
- RFC 4001: Textual Conventions for Internet Network Addresses";
- }
-
- typedef dscp {
- type uint8 {
- range "0..63";
- }
- description
- "The dscp type represents a Differentiated Services Code Point
- that may be used for marking packets in a traffic stream.
- In the value set and its semantics, this type is equivalent
- to the Dscp textual convention of the SMIv2.";
- reference
- "RFC 3289: Management Information Base for the Differentiated
- Services Architecture
- RFC 2474: Definition of the Differentiated Services Field
- (DS Field) in the IPv4 and IPv6 Headers
- RFC 2780: IANA Allocation Guidelines For Values In
- the Internet Protocol and Related Headers";
- }
-
- typedef ipv6-flow-label {
- type uint32 {
- range "0..1048575";
- }
- description
- "The ipv6-flow-label type represents the flow identifier or Flow
- Label in an IPv6 packet header that may be used to
- discriminate traffic flows.
-
- In the value set and its semantics, this type is equivalent
- to the IPv6FlowLabel textual convention of the SMIv2.";
- reference
- "RFC 3595: Textual Conventions for IPv6 Flow Label
- RFC 2460: Internet Protocol, Version 6 (IPv6) Specification";
- }
-
- typedef port-number {
- type uint16 {
- range "0..65535";
- }
- description
- "The port-number type represents a 16-bit port number of an
- Internet transport-layer protocol such as UDP, TCP, DCCP, or
- SCTP. Port numbers are assigned by IANA. A current list of
- all assignments is available from <http://www.iana.org/>.
-
- Note that the port number value zero is reserved by IANA. In
- situations where the value zero does not make sense, it can
- be excluded by subtyping the port-number type.
- In the value set and its semantics, this type is equivalent
- to the InetPortNumber textual convention of the SMIv2.";
- reference
- "RFC 768: User Datagram Protocol
- RFC 793: Transmission Control Protocol
- RFC 4960: Stream Control Transmission Protocol
- RFC 4340: Datagram Congestion Control Protocol (DCCP)
- RFC 4001: Textual Conventions for Internet Network Addresses";
- }
-
- /*** collection of types related to autonomous systems ***/
-
- typedef as-number {
- type uint32;
- description
- "The as-number type represents autonomous system numbers
- which identify an Autonomous System (AS). An AS is a set
- of routers under a single technical administration, using
- an interior gateway protocol and common metrics to route
- packets within the AS, and using an exterior gateway
- protocol to route packets to other ASes. IANA maintains
- the AS number space and has delegated large parts to the
- regional registries.
-
- Autonomous system numbers were originally limited to 16
- bits. BGP extensions have enlarged the autonomous system
- number space to 32 bits. This type therefore uses an uint32
- base type without a range restriction in order to support
- a larger autonomous system number space.
-
- In the value set and its semantics, this type is equivalent
- to the InetAutonomousSystemNumber textual convention of
- the SMIv2.";
- reference
- "RFC 1930: Guidelines for creation, selection, and registration
- of an Autonomous System (AS)
- RFC 4271: A Border Gateway Protocol 4 (BGP-4)
- RFC 4001: Textual Conventions for Internet Network Addresses
- RFC 6793: BGP Support for Four-Octet Autonomous System (AS)
- Number Space";
- }
-
- /*** collection of types related to IP addresses and hostnames ***/
-
- typedef ip-address {
- type union {
- type inet:ipv4-address;
- type inet:ipv6-address;
- }
- description
- "The ip-address type represents an IP address and is IP
- version neutral. The format of the textual representation
- implies the IP version. This type supports scoped addresses
- by allowing zone identifiers in the address format.";
- reference
- "RFC 4007: IPv6 Scoped Address Architecture";
- }
-
- typedef ipv4-address {
- type string {
- pattern
- '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
- + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
- + '(%[\p{N}\p{L}]+)?';
- }
- description
- "The ipv4-address type represents an IPv4 address in
- dotted-quad notation. The IPv4 address may include a zone
- index, separated by a % sign.
-
- The zone index is used to disambiguate identical address
- values. For link-local addresses, the zone index will
- typically be the interface index number or the name of an
- interface. If the zone index is not present, the default
- zone of the device will be used.
-
- The canonical format for the zone index is the numerical
- format";
- }
-
- typedef ipv6-address {
- type string {
- pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
- + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
- + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
- + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
- + '(%[\p{N}\p{L}]+)?';
- pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
- + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
- + '(%.+)?';
- }
- description
- "The ipv6-address type represents an IPv6 address in full,
- mixed, shortened, and shortened-mixed notation. The IPv6
- address may include a zone index, separated by a % sign.
-
- The zone index is used to disambiguate identical address
- values. For link-local addresses, the zone index will
- typically be the interface index number or the name of an
- interface. If the zone index is not present, the default
- zone of the device will be used.
-
- The canonical format of IPv6 addresses uses the textual
- representation defined in Section 4 of RFC 5952. The
- canonical format for the zone index is the numerical
- format as described in Section 11.2 of RFC 4007.";
- reference
- "RFC 4291: IP Version 6 Addressing Architecture
- RFC 4007: IPv6 Scoped Address Architecture
- RFC 5952: A Recommendation for IPv6 Address Text
- Representation";
- }
-
- typedef ip-address-no-zone {
- type union {
- type inet:ipv4-address-no-zone;
- type inet:ipv6-address-no-zone;
- }
- description
- "The ip-address-no-zone type represents an IP address and is
- IP version neutral. The format of the textual representation
- implies the IP version. This type does not support scoped
- addresses since it does not allow zone identifiers in the
- address format.";
- reference
- "RFC 4007: IPv6 Scoped Address Architecture";
- }
-
- typedef ipv4-address-no-zone {
- type inet:ipv4-address {
- pattern '[0-9\.]*';
- }
- description
- "An IPv4 address without a zone index. This type, derived from
- ipv4-address, may be used in situations where the zone is
- known from the context and hence no zone index is needed.";
- }
-
- typedef ipv6-address-no-zone {
- type inet:ipv6-address {
- pattern '[0-9a-fA-F:\.]*';
- }
- description
- "An IPv6 address without a zone index. This type, derived from
- ipv6-address, may be used in situations where the zone is
- known from the context and hence no zone index is needed.";
- reference
- "RFC 4291: IP Version 6 Addressing Architecture
- RFC 4007: IPv6 Scoped Address Architecture
- RFC 5952: A Recommendation for IPv6 Address Text
- Representation";
- }
-
- typedef ip-prefix {
- type union {
- type inet:ipv4-prefix;
- type inet:ipv6-prefix;
- }
- description
- "The ip-prefix type represents an IP prefix and is IP
- version neutral. The format of the textual representations
- implies the IP version.";
- }
-
- typedef ipv4-prefix {
- type string {
- pattern
- '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
- + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
- + '/(([0-9])|([1-2][0-9])|(3[0-2]))';
- }
- description
- "The ipv4-prefix type represents an IPv4 address prefix.
- The prefix length is given by the number following the
- slash character and must be less than or equal to 32.
-
- A prefix length value of n corresponds to an IP address
- mask that has n contiguous 1-bits from the most
- significant bit (MSB) and all other bits set to 0.
-
- The canonical format of an IPv4 prefix has all bits of
- the IPv4 address set to zero that are not part of the
- IPv4 prefix.";
- }
-
- typedef ipv6-prefix {
- type string {
- pattern '((:|[0-9a-fA-F]{0,4}):)([0-9a-fA-F]{0,4}:){0,5}'
- + '((([0-9a-fA-F]{0,4}:)?(:|[0-9a-fA-F]{0,4}))|'
- + '(((25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])\.){3}'
- + '(25[0-5]|2[0-4][0-9]|[01]?[0-9]?[0-9])))'
- + '(/(([0-9])|([0-9]{2})|(1[0-1][0-9])|(12[0-8])))';
- pattern '(([^:]+:){6}(([^:]+:[^:]+)|(.*\..*)))|'
- + '((([^:]+:)*[^:]+)?::(([^:]+:)*[^:]+)?)'
- + '(/.+)';
- }
- description
- "The ipv6-prefix type represents an IPv6 address prefix.
- The prefix length is given by the number following the
- slash character and must be less than or equal to 128.
-
- A prefix length value of n corresponds to an IP address
- mask that has n contiguous 1-bits from the most
- significant bit (MSB) and all other bits set to 0.
-
- The IPv6 address should have all bits that do not belong
- to the prefix set to zero.
-
- The canonical format of an IPv6 prefix has all bits of
- the IPv6 address set to zero that are not part of the
- IPv6 prefix. Furthermore, the IPv6 address is represented
- as defined in Section 4 of RFC 5952.";
- reference
- "RFC 5952: A Recommendation for IPv6 Address Text
- Representation";
- }
-
- /*** collection of domain name and URI types ***/
-
- typedef domain-name {
- type string {
- pattern
- '((([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.)*'
- + '([a-zA-Z0-9_]([a-zA-Z0-9\-_]){0,61})?[a-zA-Z0-9]\.?)'
- + '|\.';
- length "1..253";
- }
- description
- "The domain-name type represents a DNS domain name. The
- name SHOULD be fully qualified whenever possible.
-
- Internet domain names are only loosely specified. Section
- 3.5 of RFC 1034 recommends a syntax (modified in Section
- 2.1 of RFC 1123). The pattern above is intended to allow
- for current practice in domain name use, and some possible
- future expansion. It is designed to hold various types of
- domain names, including names used for A or AAAA records
- (host names) and other records, such as SRV records. Note
- that Internet host names have a stricter syntax (described
- in RFC 952) than the DNS recommendations in RFCs 1034 and
- 1123, and that systems that want to store host names in
- schema nodes using the domain-name type are recommended to
- adhere to this stricter standard to ensure interoperability.
-
- The encoding of DNS names in the DNS protocol is limited
- to 255 characters. Since the encoding consists of labels
- prefixed by a length bytes and there is a trailing NULL
- byte, only 253 characters can appear in the textual dotted
- notation.
-
- The description clause of schema nodes using the domain-name
- type MUST describe when and how these names are resolved to
- IP addresses. Note that the resolution of a domain-name value
- may require to query multiple DNS records (e.g., A for IPv4
- and AAAA for IPv6). The order of the resolution process and
- which DNS record takes precedence can either be defined
- explicitly or may depend on the configuration of the
- resolver.
-
- Domain-name values use the US-ASCII encoding. Their canonical
- format uses lowercase US-ASCII characters. Internationalized
- domain names MUST be A-labels as per RFC 5890.";
- reference
- "RFC 952: DoD Internet Host Table Specification
- RFC 1034: Domain Names - Concepts and Facilities
- RFC 1123: Requirements for Internet Hosts -- Application
- and Support
- RFC 2782: A DNS RR for specifying the location of services
- (DNS SRV)
- RFC 5890: Internationalized Domain Names in Applications
- (IDNA): Definitions and Document Framework";
- }
-
- typedef host {
- type union {
- type inet:ip-address;
- type inet:domain-name;
- }
- description
- "The host type represents either an IP address or a DNS
- domain name.";
- }
-
- typedef uri {
- type string;
- description
- "The uri type represents a Uniform Resource Identifier
- (URI) as defined by STD 66.
-
- Objects using the uri type MUST be in US-ASCII encoding,
- and MUST be normalized as described by RFC 3986 Sections
- 6.2.1, 6.2.2.1, and 6.2.2.2. All unnecessary
- percent-encoding is removed, and all case-insensitive
- characters are set to lowercase except for hexadecimal
- digits, which are normalized to uppercase as described in
- Section 6.2.2.1.
-
- The purpose of this normalization is to help provide
- unique URIs. Note that this normalization is not
- sufficient to provide uniqueness. Two URIs that are
- textually distinct after this normalization may still be
- equivalent.
-
- Objects using the uri type may restrict the schemes that
- they permit. For example, 'data:' and 'urn:' schemes
- might not be appropriate.
-
- A zero-length URI is not a valid URI. This can be used to
- express 'URI absent' where required.
-
- In the value set and its semantics, this type is equivalent
- to the Uri SMIv2 textual convention defined in RFC 5017.";
- reference
- "RFC 3986: Uniform Resource Identifier (URI): Generic Syntax
- RFC 3305: Report from the Joint W3C/IETF URI Planning Interest
- Group: Uniform Resource Identifiers (URIs), URLs,
- and Uniform Resource Names (URNs): Clarifications
- and Recommendations
- RFC 5017: MIB Textual Conventions for Uniform Resource
- Identifiers (URIs)";
- }
-
-}
diff --git a/tools/yang/ietf-netconf-monitoring.yang b/tools/yang/ietf-netconf-monitoring.yang
deleted file mode 100644
index 8d2380e7..00000000
--- a/tools/yang/ietf-netconf-monitoring.yang
+++ /dev/null
@@ -1,558 +0,0 @@
-module ietf-netconf-monitoring {
-
- namespace "urn:ietf:params:xml:ns:yang:ietf-netconf-monitoring";
- prefix "ncm";
-
- import ietf-yang-types { prefix yang; }
- import ietf-inet-types { prefix inet; }
-
- organization
- "IETF NETCONF (Network Configuration) Working Group";
-
- contact
- "WG Web: <http://tools.ietf.org/wg/netconf/>
- WG List: <mailto:netconf@ietf.org>
-
- WG Chair: Mehmet Ersue
- <mailto:mehmet.ersue@nsn.com>
-
- WG Chair: Bert Wijnen
- <mailto:bertietf@bwijnen.net>
-
- Editor: Mark Scott
- <mailto:mark.scott@ericsson.com>
-
- Editor: Martin Bjorklund
- <mailto:mbj@tail-f.com>";
-
- description
- "NETCONF Monitoring Module.
- All elements in this module are read-only.
-
- Copyright (c) 2010 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD
- License set forth in Section 4.c of the IETF Trust's
- Legal Provisions Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC 6022; see
- the RFC itself for full legal notices.";
-
- revision 2010-10-04 {
- description
- "Initial revision.";
- reference
- "RFC 6022: YANG Module for NETCONF Monitoring";
- }
-
- typedef netconf-datastore-type {
- type enumeration {
- enum running;
- enum candidate;
- enum startup;
- }
- description
- "Enumeration of possible NETCONF datastore types.";
- reference
- "RFC 4741: NETCONF Configuration Protocol";
- }
-
- identity transport {
- description
- "Base identity for NETCONF transport types.";
- }
-
- identity netconf-ssh {
- base transport;
- description
- "NETCONF over Secure Shell (SSH).";
- reference
- "RFC 4742: Using the NETCONF Configuration Protocol
- over Secure SHell (SSH)";
- }
-
- identity netconf-soap-over-beep {
- base transport;
- description
- "NETCONF over Simple Object Access Protocol (SOAP) over
- Blocks Extensible Exchange Protocol (BEEP).";
- reference
- "RFC 4743: Using NETCONF over the Simple Object
- Access Protocol (SOAP)";
- }
-
- identity netconf-soap-over-https {
- base transport;
- description
- "NETCONF over Simple Object Access Protocol (SOAP)
- over Hypertext Transfer Protocol Secure (HTTPS).";
- reference
- "RFC 4743: Using NETCONF over the Simple Object
- Access Protocol (SOAP)";
- }
-
- identity netconf-beep {
- base transport;
- description
- "NETCONF over Blocks Extensible Exchange Protocol (BEEP).";
- reference
- "RFC 4744: Using the NETCONF Protocol over the
- Blocks Extensible Exchange Protocol (BEEP)";
- }
-
- identity netconf-tls {
- base transport;
- description
- "NETCONF over Transport Layer Security (TLS).";
- reference
- "RFC 5539: NETCONF over Transport Layer Security (TLS)";
- }
-
- identity schema-format {
- description
- "Base identity for data model schema languages.";
- }
-
- identity xsd {
- base schema-format;
- description
- "W3C XML Schema Definition.";
- reference
- "W3C REC REC-xmlschema-1-20041028:
- XML Schema Part 1: Structures";
- }
-
- identity yang {
- base schema-format;
- description
- "The YANG data modeling language for NETCONF.";
- reference
- "RFC 6020: YANG - A Data Modeling Language for the
- Network Configuration Protocol (NETCONF)";
- }
-
- identity yin {
- base schema-format;
- description
- "The YIN syntax for YANG.";
- reference
- "RFC 6020: YANG - A Data Modeling Language for the
- Network Configuration Protocol (NETCONF)";
- }
-
- identity rng {
- base schema-format;
- description
- "Regular Language for XML Next Generation (RELAX NG).";
- reference
- "ISO/IEC 19757-2:2008: RELAX NG";
- }
-
- identity rnc {
- base schema-format;
- description
- "Relax NG Compact Syntax";
- reference
- "ISO/IEC 19757-2:2008: RELAX NG";
- }
-
- grouping common-counters {
- description
- "Counters that exist both per session, and also globally,
- accumulated from all sessions.";
-
- leaf in-rpcs {
- type yang:zero-based-counter32;
- description
- "Number of correct <rpc> messages received.";
- }
- leaf in-bad-rpcs {
- type yang:zero-based-counter32;
- description
- "Number of messages received when an <rpc> message was expected,
- that were not correct <rpc> messages. This includes XML parse
- errors and errors on the rpc layer.";
- }
- leaf out-rpc-errors {
- type yang:zero-based-counter32;
- description
- "Number of <rpc-reply> messages sent that contained an
- <rpc-error> element.";
- }
- leaf out-notifications {
- type yang:zero-based-counter32;
- description
- "Number of <notification> messages sent.";
- }
- }
-
- container netconf-state {
- config false;
- description
- "The netconf-state container is the root of the monitoring
- data model.";
-
- container capabilities {
- description
- "Contains the list of NETCONF capabilities supported by the
- server.";
-
- leaf-list capability {
- type inet:uri;
- description
- "List of NETCONF capabilities supported by the server.";
- }
- }
-
- container datastores {
- description
- "Contains the list of NETCONF configuration datastores.";
-
- list datastore {
- key name;
- description
- "List of NETCONF configuration datastores supported by
- the NETCONF server and related information.";
-
- leaf name {
- type netconf-datastore-type;
- description
- "Name of the datastore associated with this list entry.";
- }
- container locks {
- presence
- "This container is present only if the datastore
- is locked.";
- description
- "The NETCONF <lock> and <partial-lock> operations allow
- a client to lock specific resources in a datastore. The
- NETCONF server will prevent changes to the locked
- resources by all sessions except the one that acquired
- the lock(s).
-
- Monitoring information is provided for each datastore
- entry including details such as the session that acquired
- the lock, the type of lock (global or partial) and the
- list of locked resources. Multiple locks per datastore
- are supported.";
-
- grouping lock-info {
- description
- "Lock related parameters, common to both global and
- partial locks.";
-
- leaf locked-by-session {
- type uint32;
- mandatory true;
- description
- "The session ID of the session that has locked
- this resource. Both a global lock and a partial
- lock MUST contain the NETCONF session-id.
-
- If the lock is held by a session that is not managed
- by the NETCONF server (e.g., a CLI session), a session
- id of 0 (zero) is reported.";
- reference
- "RFC 4741: NETCONF Configuration Protocol";
- }
- leaf locked-time {
- type yang:date-and-time;
- mandatory true;
- description
- "The date and time of when the resource was
- locked.";
- }
- }
-
- choice lock-type {
- description
- "Indicates if a global lock or a set of partial locks
- are set.";
-
- container global-lock {
- description
- "Present if the global lock is set.";
- uses lock-info;
- }
-
- list partial-lock {
- key lock-id;
- description
- "List of partial locks.";
- reference
- "RFC 5717: Partial Lock Remote Procedure Call (RPC) for
- NETCONF";
-
- leaf lock-id {
- type uint32;
- description
- "This is the lock id returned in the <partial-lock>
- response.";
- }
- uses lock-info;
- leaf-list select {
- type yang:xpath1.0;
- min-elements 1;
- description
- "The xpath expression that was used to request
- the lock. The select expression indicates the
- original intended scope of the lock.";
- }
- leaf-list locked-node {
- type instance-identifier;
- description
- "The list of instance-identifiers (i.e., the
- locked nodes).
-
- The scope of the partial lock is defined by the list
- of locked nodes.";
- }
- }
- }
- }
- }
- }
-
- container schemas {
- description
- "Contains the list of data model schemas supported by the
- server.";
-
- list schema {
- key "identifier version format";
-
- description
- "List of data model schemas supported by the server.";
-
- leaf identifier {
- type string;
- description
- "Identifier to uniquely reference the schema. The
- identifier is used in the <get-schema> operation and may
- be used for other purposes such as file retrieval.
-
- For modeling languages that support or require a data
- model name (e.g., YANG module name) the identifier MUST
- match that name. For YANG data models, the identifier is
- the name of the module or submodule. In other cases, an
- identifier such as a filename MAY be used instead.";
- }
- leaf version {
- type string;
- description
- "Version of the schema supported. Multiple versions MAY be
- supported simultaneously by a NETCONF server. Each
- version MUST be reported individually in the schema list,
- i.e., with same identifier, possibly different location,
- but different version.
-
- For YANG data models, version is the value of the most
- recent YANG 'revision' statement in the module or
- submodule, or the empty string if no 'revision' statement
- is present.";
- }
- leaf format {
- type identityref {
- base schema-format;
- }
- description
- "The data modeling language the schema is written
- in (currently xsd, yang, yin, rng, or rnc).
- For YANG data models, 'yang' format MUST be supported and
- 'yin' format MAY also be provided.";
- }
- leaf namespace {
- type inet:uri;
- mandatory true;
- description
- "The XML namespace defined by the data model.
-
- For YANG data models, this is the module's namespace.
- If the list entry describes a submodule, this field
- contains the namespace of the module to which the
- submodule belongs.";
- }
- leaf-list location {
- type union {
- type enumeration {
- enum "NETCONF";
- }
- type inet:uri;
- }
- description
- "One or more locations from which the schema can be
- retrieved. This list SHOULD contain at least one
- entry per schema.
-
- A schema entry may be located on a remote file system
- (e.g., reference to file system for ftp retrieval) or
- retrieved directly from a server supporting the
- <get-schema> operation (denoted by the value 'NETCONF').";
- }
- }
- }
-
- container sessions {
- description
- "The sessions container includes session-specific data for
- NETCONF management sessions. The session list MUST include
- all currently active NETCONF sessions.";
-
- list session {
- key session-id;
- description
- "All NETCONF sessions managed by the NETCONF server
- MUST be reported in this list.";
-
- leaf session-id {
- type uint32 {
- range "1..max";
- }
- description
- "Unique identifier for the session. This value is the
- NETCONF session identifier, as defined in RFC 4741.";
- reference
- "RFC 4741: NETCONF Configuration Protocol";
- }
- leaf transport {
- type identityref {
- base transport;
- }
- mandatory true;
- description
- "Identifies the transport for each session, e.g.,
- 'netconf-ssh', 'netconf-soap', etc.";
- }
- leaf username {
- type string;
- mandatory true;
- description
- "The username is the client identity that was authenticated
- by the NETCONF transport protocol. The algorithm used to
- derive the username is NETCONF transport protocol specific
- and in addition specific to the authentication mechanism
- used by the NETCONF transport protocol.";
- }
- leaf source-host {
- type inet:host;
- description
- "Host identifier of the NETCONF client. The value
- returned is implementation specific (e.g., hostname,
- IPv4 address, IPv6 address)";
- }
- leaf login-time {
- type yang:date-and-time;
- mandatory true;
- description
- "Time at the server at which the session was established.";
- }
- uses common-counters {
- description
- "Per-session counters. Zero based with following reset
- behaviour:
- - at start of a session
- - when max value is reached";
- }
- }
- }
-
- container statistics {
- description
- "Statistical data pertaining to the NETCONF server.";
-
- leaf netconf-start-time {
- type yang:date-and-time;
- description
- "Date and time at which the management subsystem was
- started.";
- }
- leaf in-bad-hellos {
- type yang:zero-based-counter32;
- description
- "Number of sessions silently dropped because an
- invalid <hello> message was received. This includes <hello>
- messages with a 'session-id' attribute, bad namespace, and
- bad capability declarations.";
- }
- leaf in-sessions {
- type yang:zero-based-counter32;
- description
- "Number of sessions started. This counter is incremented
- when a <hello> message with a <session-id> is sent.
-
- 'in-sessions' - 'in-bad-hellos' =
- 'number of correctly started netconf sessions'";
- }
- leaf dropped-sessions {
- type yang:zero-based-counter32;
- description
- "Number of sessions that were abnormally terminated, e.g.,
- due to idle timeout or transport close. This counter is not
- incremented when a session is properly closed by a
- <close-session> operation, or killed by a <kill-session>
- operation.";
- }
- uses common-counters {
- description
- "Global counters, accumulated from all sessions.
- Zero based with following reset behaviour:
- - re-initialization of NETCONF server
- - when max value is reached";
- }
- }
- }
-
- rpc get-schema {
- description
- "This operation is used to retrieve a schema from the
- NETCONF server.
-
- Positive Response:
- The NETCONF server returns the requested schema.
-
- Negative Response:
- If requested schema does not exist, the <error-tag> is
- 'invalid-value'.
-
- If more than one schema matches the requested parameters, the
- <error-tag> is 'operation-failed', and <error-app-tag> is
- 'data-not-unique'.";
-
- input {
- leaf identifier {
- type string;
- mandatory true;
- description
- "Identifier for the schema list entry.";
- }
- leaf version {
- type string;
- description
- "Version of the schema requested. If this parameter is not
- present, and more than one version of the schema exists on
- the server, a 'data-not-unique' error is returned, as
- described above.";
- }
- leaf format {
- type identityref {
- base schema-format;
- }
- description
- "The data modeling language of the schema. If this
- parameter is not present, and more than one formats of
- the schema exists on the server, a 'data-not-unique' error
- is returned, as described above.";
- }
- }
- output {
- anyxml data {
- description
- "Contains the schema content.";
- }
- }
- }
-}
diff --git a/tools/yang/ietf-yang-smiv2.yang b/tools/yang/ietf-yang-smiv2.yang
deleted file mode 100644
index b06afc7a..00000000
--- a/tools/yang/ietf-yang-smiv2.yang
+++ /dev/null
@@ -1,144 +0,0 @@
-module ietf-yang-smiv2 {
-
- namespace "urn:ietf:params:xml:ns:yang:ietf-yang-smiv2";
- prefix "smiv2";
-
- organization
- "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
- contact
- "WG Web: <http://tools.ietf.org/wg/netmod/>
- WG List: <mailto:netmod@ietf.org>
-
- WG Chair: David Kessens
- <mailto:david.kessens@nsn.com>
-
- WG Chair: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>
-
- Editor: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>";
-
- description
- "This module defines YANG extensions that are used to translate
- SMIv2 concepts into YANG.
-
- Copyright (c) 2011 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC XXXX; see
- the RFC itself for full legal notices.";
- // RFC Ed.: replace XXXX with actual RFC number and remove this note
-
- // RFC Ed.: please update the date to the date of publication
- revision 2011-11-25 {
- description
- "Initial revision.";
- reference
- "RFC XXXX: Translation of SMIv2 MIB Modules to YANG Modules";
- // RFC Ed.: replace XXXX with actual RFC number and remove this note
- }
-
- identity object-identity {
- description
- "Base identity for all SMIv2 OBJECT-IDENTITYs.";
- }
-
- typedef opaque {
- type binary;
- description
- "The Opaque type supports the capability to pass arbitrary ASN.1
- syntax. A value is encoded using the ASN.1 Basic Encoding Rules
- into a string of octets. This, in turn, is encoded as an OCTET
- STRING, in effect 'double-wrapping' the original ASN.1 value.
-
- In the value set and its semantics, this type is equivalent to
- the Opaque type of the SMIv2. This type exists in the SMIv2
- solely for backward-compatibility reasons and this is also
- true for this YANG data type.";
- reference
- "RFC 2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
- extension display-hint {
- argument "format";
- description
- "The display-hint statement takes as an argument the DISPLAY-HINT
- assigned to an SMIv2 textual convention.";
- reference
- "RFC2579: Textual Conventions for SMIv2";
- }
-
- extension max-access {
- argument "access";
- description
- "The max-access statement takes as an argument the MAX-ACCESS
- assigned to an SMIv2 object definition";
- reference
- "RFC2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
- extension defval {
- argument "value";
- description
- "The defval statement takes as an argument a default value
- defined by an SMIv2 DEFVAL clause. Note that the value is in
- the SMIv2 value space defined by the SMIv2 syntax of the
- corresponding object and not in the YANG value space
- defined by the corresponding YANG data type.";
- reference
- "RFC2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
- extension implied {
- argument "index";
- description
- "If an SMIv2 INDEX object is preceded by the IMPLIED keyword, then
- the implied statement is present in the yang module and takes as
- an argument the name of the IMPLIED index object.";
- reference
- "RFC2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
- extension alias {
- argument "descriptor";
- description
- "The alias statement introduces an SMIv2 descriptor. The body of
- the alias statement is expected to contain an oid statement that
- provides the numeric OID associated with the descriptor.";
- reference
- "RFC2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
- extension oid {
- argument "value";
- description
- "The oid statement takes as an argument the object identifier
- assigned to an SMIv2 definition. The object identifier value
- is written in decimal dotted notation.";
- reference
- "RFC2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
- extension subid {
- argument "value";
- description
- "The subid statement takes as an argument the last sub-identifier
- of the object identifier assigned to an SMIv2 definition. The
- sub-identifier value is a single positive decimal natural number.
- The subid statement may not be used as a substatement to any
- top-level node in a YANG document. The subid substatement may
- be used only as a substatement to a node having a parent node
- defined with either a smiv2:oid or smiv2:subid substatement.";
- reference
- "RFC2578: Structure of Management Information Version 2 (SMIv2)";
- }
-
-}
diff --git a/tools/yang/ietf-yang-types.yang b/tools/yang/ietf-yang-types.yang
deleted file mode 100644
index ee58fa3a..00000000
--- a/tools/yang/ietf-yang-types.yang
+++ /dev/null
@@ -1,474 +0,0 @@
-module ietf-yang-types {
-
- namespace "urn:ietf:params:xml:ns:yang:ietf-yang-types";
- prefix "yang";
-
- organization
- "IETF NETMOD (NETCONF Data Modeling Language) Working Group";
-
- contact
- "WG Web: <http://tools.ietf.org/wg/netmod/>
- WG List: <mailto:netmod@ietf.org>
-
- WG Chair: David Kessens
- <mailto:david.kessens@nsn.com>
-
- WG Chair: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>
-
- Editor: Juergen Schoenwaelder
- <mailto:j.schoenwaelder@jacobs-university.de>";
-
- description
- "This module contains a collection of generally useful derived
- YANG data types.
-
- Copyright (c) 2013 IETF Trust and the persons identified as
- authors of the code. All rights reserved.
-
- Redistribution and use in source and binary forms, with or
- without modification, is permitted pursuant to, and subject
- to the license terms contained in, the Simplified BSD License
- set forth in Section 4.c of the IETF Trust's Legal Provisions
- Relating to IETF Documents
- (http://trustee.ietf.org/license-info).
-
- This version of this YANG module is part of RFC 6991; see
- the RFC itself for full legal notices.";
-
- revision 2013-07-15 {
- description
- "This revision adds the following new data types:
- - yang-identifier
- - hex-string
- - uuid
- - dotted-quad";
- reference
- "RFC 6991: Common YANG Data Types";
- }
-
- revision 2010-09-24 {
- description
- "Initial revision.";
- reference
- "RFC 6021: Common YANG Data Types";
- }
-
- /*** collection of counter and gauge types ***/
-
- typedef counter32 {
- type uint32;
- description
- "The counter32 type represents a non-negative integer
- that monotonically increases until it reaches a
- maximum value of 2^32-1 (4294967295 decimal), when it
- wraps around and starts increasing again from zero.
-
- Counters have no defined 'initial' value, and thus, a
- single value of a counter has (in general) no information
- content. Discontinuities in the monotonically increasing
- value normally occur at re-initialization of the
- management system, and at other times as specified in the
- description of a schema node using this type. If such
- other times can occur, for example, the creation of
- a schema node of type counter32 at times other than
- re-initialization, then a corresponding schema node
- should be defined, with an appropriate type, to indicate
- the last discontinuity.
-
- The counter32 type should not be used for configuration
- schema nodes. A default statement SHOULD NOT be used in
- combination with the type counter32.
-
- In the value set and its semantics, this type is equivalent
- to the Counter32 type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef zero-based-counter32 {
- type yang:counter32;
- default "0";
- description
- "The zero-based-counter32 type represents a counter32
- that has the defined 'initial' value zero.
-
- A schema node of this type will be set to zero (0) on creation
- and will thereafter increase monotonically until it reaches
- a maximum value of 2^32-1 (4294967295 decimal), when it
- wraps around and starts increasing again from zero.
-
- Provided that an application discovers a new schema node
- of this type within the minimum time to wrap, it can use the
- 'initial' value as a delta. It is important for a management
- station to be aware of this minimum time and the actual time
- between polls, and to discard data if the actual time is too
- long or there is no defined minimum time.
-
- In the value set and its semantics, this type is equivalent
- to the ZeroBasedCounter32 textual convention of the SMIv2.";
- reference
- "RFC 4502: Remote Network Monitoring Management Information
- Base Version 2";
- }
-
- typedef counter64 {
- type uint64;
- description
- "The counter64 type represents a non-negative integer
- that monotonically increases until it reaches a
- maximum value of 2^64-1 (18446744073709551615 decimal),
- when it wraps around and starts increasing again from zero.
-
- Counters have no defined 'initial' value, and thus, a
- single value of a counter has (in general) no information
- content. Discontinuities in the monotonically increasing
- value normally occur at re-initialization of the
- management system, and at other times as specified in the
- description of a schema node using this type. If such
- other times can occur, for example, the creation of
- a schema node of type counter64 at times other than
- re-initialization, then a corresponding schema node
- should be defined, with an appropriate type, to indicate
- the last discontinuity.
-
- The counter64 type should not be used for configuration
- schema nodes. A default statement SHOULD NOT be used in
- combination with the type counter64.
-
- In the value set and its semantics, this type is equivalent
- to the Counter64 type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef zero-based-counter64 {
- type yang:counter64;
- default "0";
- description
- "The zero-based-counter64 type represents a counter64 that
- has the defined 'initial' value zero.
-
- A schema node of this type will be set to zero (0) on creation
- and will thereafter increase monotonically until it reaches
- a maximum value of 2^64-1 (18446744073709551615 decimal),
- when it wraps around and starts increasing again from zero.
-
- Provided that an application discovers a new schema node
- of this type within the minimum time to wrap, it can use the
- 'initial' value as a delta. It is important for a management
- station to be aware of this minimum time and the actual time
- between polls, and to discard data if the actual time is too
- long or there is no defined minimum time.
-
- In the value set and its semantics, this type is equivalent
- to the ZeroBasedCounter64 textual convention of the SMIv2.";
- reference
- "RFC 2856: Textual Conventions for Additional High Capacity
- Data Types";
- }
-
- typedef gauge32 {
- type uint32;
- description
- "The gauge32 type represents a non-negative integer, which
- may increase or decrease, but shall never exceed a maximum
- value, nor fall below a minimum value. The maximum value
- cannot be greater than 2^32-1 (4294967295 decimal), and
- the minimum value cannot be smaller than 0. The value of
- a gauge32 has its maximum value whenever the information
- being modeled is greater than or equal to its maximum
- value, and has its minimum value whenever the information
- being modeled is smaller than or equal to its minimum value.
- If the information being modeled subsequently decreases
- below (increases above) the maximum (minimum) value, the
- gauge32 also decreases (increases).
-
- In the value set and its semantics, this type is equivalent
- to the Gauge32 type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef gauge64 {
- type uint64;
- description
- "The gauge64 type represents a non-negative integer, which
- may increase or decrease, but shall never exceed a maximum
- value, nor fall below a minimum value. The maximum value
- cannot be greater than 2^64-1 (18446744073709551615), and
- the minimum value cannot be smaller than 0. The value of
- a gauge64 has its maximum value whenever the information
- being modeled is greater than or equal to its maximum
- value, and has its minimum value whenever the information
- being modeled is smaller than or equal to its minimum value.
- If the information being modeled subsequently decreases
- below (increases above) the maximum (minimum) value, the
- gauge64 also decreases (increases).
-
- In the value set and its semantics, this type is equivalent
- to the CounterBasedGauge64 SMIv2 textual convention defined
- in RFC 2856";
- reference
- "RFC 2856: Textual Conventions for Additional High Capacity
- Data Types";
- }
-
- /*** collection of identifier-related types ***/
-
- typedef object-identifier {
- type string {
- pattern '(([0-1](\.[1-3]?[0-9]))|(2\.(0|([1-9]\d*))))'
- + '(\.(0|([1-9]\d*)))*';
- }
- description
- "The object-identifier type represents administratively
- assigned names in a registration-hierarchical-name tree.
-
- Values of this type are denoted as a sequence of numerical
- non-negative sub-identifier values. Each sub-identifier
- value MUST NOT exceed 2^32-1 (4294967295). Sub-identifiers
- are separated by single dots and without any intermediate
- whitespace.
-
- The ASN.1 standard restricts the value space of the first
- sub-identifier to 0, 1, or 2. Furthermore, the value space
- of the second sub-identifier is restricted to the range
- 0 to 39 if the first sub-identifier is 0 or 1. Finally,
- the ASN.1 standard requires that an object identifier
- has always at least two sub-identifiers. The pattern
- captures these restrictions.
-
- Although the number of sub-identifiers is not limited,
- module designers should realize that there may be
- implementations that stick with the SMIv2 limit of 128
- sub-identifiers.
-
- This type is a superset of the SMIv2 OBJECT IDENTIFIER type
- since it is not restricted to 128 sub-identifiers. Hence,
- this type SHOULD NOT be used to represent the SMIv2 OBJECT
- IDENTIFIER type; the object-identifier-128 type SHOULD be
- used instead.";
- reference
- "ISO9834-1: Information technology -- Open Systems
- Interconnection -- Procedures for the operation of OSI
- Registration Authorities: General procedures and top
- arcs of the ASN.1 Object Identifier tree";
- }
-
- typedef object-identifier-128 {
- type object-identifier {
- pattern '\d*(\.\d*){1,127}';
- }
- description
- "This type represents object-identifiers restricted to 128
- sub-identifiers.
-
- In the value set and its semantics, this type is equivalent
- to the OBJECT IDENTIFIER type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef yang-identifier {
- type string {
- length "1..max";
- pattern '[a-zA-Z_][a-zA-Z0-9\-_.]*';
- pattern '.|..|[^xX].*|.[^mM].*|..[^lL].*';
- }
- description
- "A YANG identifier string as defined by the 'identifier'
- rule in Section 12 of RFC 6020. An identifier must
- start with an alphabetic character or an underscore
- followed by an arbitrary sequence of alphabetic or
- numeric characters, underscores, hyphens, or dots.
-
- A YANG identifier MUST NOT start with any possible
- combination of the lowercase or uppercase character
- sequence 'xml'.";
- reference
- "RFC 6020: YANG - A Data Modeling Language for the Network
- Configuration Protocol (NETCONF)";
- }
-
- /*** collection of types related to date and time***/
-
- typedef date-and-time {
- type string {
- pattern '\d{4}-\d{2}-\d{2}T\d{2}:\d{2}:\d{2}(\.\d+)?'
- + '(Z|[\+\-]\d{2}:\d{2})';
- }
- description
- "The date-and-time type is a profile of the ISO 8601
- standard for representation of dates and times using the
- Gregorian calendar. The profile is defined by the
- date-time production in Section 5.6 of RFC 3339.
-
- The date-and-time type is compatible with the dateTime XML
- schema type with the following notable exceptions:
-
- (a) The date-and-time type does not allow negative years.
-
- (b) The date-and-time time-offset -00:00 indicates an unknown
- time zone (see RFC 3339) while -00:00 and +00:00 and Z
- all represent the same time zone in dateTime.
-
- (c) The canonical format (see below) of data-and-time values
- differs from the canonical format used by the dateTime XML
- schema type, which requires all times to be in UTC using
- the time-offset 'Z'.
-
- This type is not equivalent to the DateAndTime textual
- convention of the SMIv2 since RFC 3339 uses a different
- separator between full-date and full-time and provides
- higher resolution of time-secfrac.
-
- The canonical format for date-and-time values with a known time
- zone uses a numeric time zone offset that is calculated using
- the device's configured known offset to UTC time. A change of
- the device's offset to UTC time will cause date-and-time values
- to change accordingly. Such changes might happen periodically
- in case a server follows automatically daylight saving time
- (DST) time zone offset changes. The canonical format for
- date-and-time values with an unknown time zone (usually
- referring to the notion of local time) uses the time-offset
- -00:00.";
- reference
- "RFC 3339: Date and Time on the Internet: Timestamps
- RFC 2579: Textual Conventions for SMIv2
- XSD-TYPES: XML Schema Part 2: Datatypes Second Edition";
- }
-
- typedef timeticks {
- type uint32;
- description
- "The timeticks type represents a non-negative integer that
- represents the time, modulo 2^32 (4294967296 decimal), in
- hundredths of a second between two epochs. When a schema
- node is defined that uses this type, the description of
- the schema node identifies both of the reference epochs.
-
- In the value set and its semantics, this type is equivalent
- to the TimeTicks type of the SMIv2.";
- reference
- "RFC 2578: Structure of Management Information Version 2
- (SMIv2)";
- }
-
- typedef timestamp {
- type yang:timeticks;
- description
- "The timestamp type represents the value of an associated
- timeticks schema node at which a specific occurrence
- happened. The specific occurrence must be defined in the
- description of any schema node defined using this type. When
- the specific occurrence occurred prior to the last time the
- associated timeticks attribute was zero, then the timestamp
- value is zero. Note that this requires all timestamp values
- to be reset to zero when the value of the associated timeticks
- attribute reaches 497+ days and wraps around to zero.
-
- The associated timeticks schema node must be specified
- in the description of any schema node using this type.
-
- In the value set and its semantics, this type is equivalent
- to the TimeStamp textual convention of the SMIv2.";
- reference
- "RFC 2579: Textual Conventions for SMIv2";
- }
-
- /*** collection of generic address types ***/
-
- typedef phys-address {
- type string {
- pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
- }
-
- description
- "Represents media- or physical-level addresses represented
- as a sequence octets, each octet represented by two hexadecimal
- numbers. Octets are separated by colons. The canonical
- representation uses lowercase characters.
-
- In the value set and its semantics, this type is equivalent
- to the PhysAddress textual convention of the SMIv2.";
- reference
- "RFC 2579: Textual Conventions for SMIv2";
- }
-
- typedef mac-address {
- type string {
- pattern '[0-9a-fA-F]{2}(:[0-9a-fA-F]{2}){5}';
- }
- description
- "The mac-address type represents an IEEE 802 MAC address.
- The canonical representation uses lowercase characters.
-
- In the value set and its semantics, this type is equivalent
- to the MacAddress textual convention of the SMIv2.";
- reference
- "IEEE 802: IEEE Standard for Local and Metropolitan Area
- Networks: Overview and Architecture
- RFC 2579: Textual Conventions for SMIv2";
- }
-
- /*** collection of XML-specific types ***/
-
- typedef xpath1.0 {
- type string;
- description
- "This type represents an XPATH 1.0 expression.
-
- When a schema node is defined that uses this type, the
- description of the schema node MUST specify the XPath
- context in which the XPath expression is evaluated.";
- reference
- "XPATH: XML Path Language (XPath) Version 1.0";
- }
-
- /*** collection of string types ***/
-
- typedef hex-string {
- type string {
- pattern '([0-9a-fA-F]{2}(:[0-9a-fA-F]{2})*)?';
- }
- description
- "A hexadecimal string with octets represented as hex digits
- separated by colons. The canonical representation uses
- lowercase characters.";
- }
-
- typedef uuid {
- type string {
- pattern '[0-9a-fA-F]{8}-[0-9a-fA-F]{4}-[0-9a-fA-F]{4}-'
- + '[0-9a-fA-F]{4}-[0-9a-fA-F]{12}';
- }
- description
- "A Universally Unique IDentifier in the string representation
- defined in RFC 4122. The canonical representation uses
- lowercase characters.
-
- The following is an example of a UUID in string representation:
- f81d4fae-7dec-11d0-a765-00a0c91e6bf6
- ";
- reference
- "RFC 4122: A Universally Unique IDentifier (UUID) URN
- Namespace";
- }
-
- typedef dotted-quad {
- type string {
- pattern
- '(([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.){3}'
- + '([0-9]|[1-9][0-9]|1[0-9][0-9]|2[0-4][0-9]|25[0-5])';
- }
- description
- "An unsigned 32-bit number expressed in the dotted-quad
- notation, i.e., four octets written as decimal numbers
- and separated with the '.' (full stop) character.";
- }
-}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 07:03:06 +0000