15 files changed, 445 insertions, 175 deletions
diff --git a/debian/README.runit b/debian/README.runit
new file mode 100644
index 0000000..4ac2814
--- /dev/null
+++ b/debian/README.runit
@@ -0,0 +1,46 @@
+Using the dropbear SSH server with runit's services supervision
+---------------------------------------------------------------
+
+The dropbear SSH server is perfectly suited to be run under runit's
+service supervision, and this package already has prepared an adequate
+service directory.  Follow these steps to enable the dropbear service
+using the runit package.
+
+If not yet installed on your system, install the runit package, and make
+sure its service supervision is enabled (it's by default)
+
+ # apt-get install runit
+
+Make sure the dropbear service normally handled through the sysv init
+script is stopped
+
+ # /etc/init.d/dropbear stop
+
+Create the system user ``dropbearlog'' which will run the logger service,
+and own the logs
+
+ # adduser --system --home /var/log/dropbear --no-create-home dropbearlog
+
+Create the log directory and make the newly created system user the owner
+of this directory
+
+ # mkdir -p /var/log/dropbear && chown dropbearlog /var/log/dropbear
+
+Optionally adjust the configuration of the dropbear service by editing the
+run script
+
+ # vi /etc/dropbear/run
+
+Finally enable the service by linking dropbear's service directory to
+/var/service/.  The service will be started within five seconds, and
+automatically at boot time.  The sysv init script is disabled; see the
+runsvctrl(8) program for information on how to control services handled by
+runit.  See the svlogd(8) program on how to configure the log service.
+
+ # ln -s /etc/dropbear /var/service/
+
+Optionally check the status of the service a few seconds later
+
+ # runsvstat -l /var/service/dropbear
+
+ -- Gerrit Pape <pape@smarden.org>, Sun, 16 May 2004 15:52:34 +0000
diff --git a/debian/changelog b/debian/changelog
index cb7253f..d9da388 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,55 @@
+dropbear (0.43-1) unstable; urgency=high
+
+  * New upstream release 0.43
+  * SECURITY: Don't attempt to free uninitialised buffers in DSS verification
+    code
+  * Handle portforwarding to servers which don't send any initial data
+    (Closes: #258426)
+
+ -- Matt Johnston <matt@ucc.asn.au>  Fri, 16 July 2004 17:44:54 +0800
+
+dropbear (0.42-1) unstable; urgency=low
+
+  * New upstream release 0.42
+
+ -- Matt Johnston <matt@ucc.asn.au>  Wed, 16 June 2004 12:44:54 +0800
+
+dropbear (0.41-3) unstable; urgency=low
+
+  * 1st upload to the Debian archive (closes: #216553).
+  * debian/diff/cvs-20040520.diff: new; stable cvs snapshot.
+  * debian/rules: new target patch: apply diffs in debian/diff/, reverse
+    apply in target clean; install man pages.
+  * debian/control: Priority: optional.
+
+ -- Gerrit Pape <pape@smarden.org>  Sun, 23 May 2004 08:32:37 +0000
+
+dropbear (0.41-2) unstable; urgency=low
+
+  * new maintainer.
+  * debian/control: no longer Build-Depends: debhelper; Build-Depends:
+    libz-dev; Standards-Version: 3.6.1.0; Suggests: runit; update
+    descriptions.
+  * debian/rules: stop using debhelper, use implicit rules; cleanup;
+    install dropbearconvert into /usr/lib/dropbear/.
+  * debian/impicit: new; implicit rules.
+  * debian/copyright.in: adapt.
+  * debian/dropbear.init: minor adaptions; test for dropbear service
+    directory.
+  * debian/README.runit: new; how to use dropbear with runit.
+  * debian/README.Debian, debian/docs: rename to debian/dropbear.*.
+  * debian/dropbear.docs: add debian/README.runit
+  * debian/conffiles: rename to debian/dropbear.conffiles; add init
+    script, and run scripts.
+  * debian/postinst: rename to debian/dropbear.postinst; adapt; use
+    invloke-rc.d dropbear start.
+  * debian/dropbear.prerm: new; invoke-rc.d dropbear stop.
+  * debian/postrm: rename to debian/dropbear.postrm; adapt; clean up
+    service directories.
+  * debian/compat, debian/dirs, dropbear.default: remove; obsolete.
+
+ -- Gerrit Pape <pape@smarden.org>  Sun, 16 May 2004 16:50:55 +0000
+
 dropbear (0.41-1) unstable; urgency=low
 
   * Updated to 0.41 release.
diff --git a/debian/control b/debian/control
index e528454..33c717c 100644
--- a/debian/control
+++ b/debian/control
@@ -1,14 +1,20 @@
 Source: dropbear
 Section: net
-Priority: standard
-Maintainer: Grahame Bowland <grahame@angrygoats.net>
-Build-Depends: debhelper (>> 4.0.0), zlib1g-dev
-Standards-Version: 3.5.8
+Priority: optional
+Maintainer: Gerrit Pape <pape@smarden.org>
+Build-Depends: libz-dev
+Standards-Version: 3.6.1.0
 
 Package: dropbear
 Architecture: any
-Depends: ${shlibs:Depends} ${misc:Depends}
-Suggests: ssh
-Description: a minimal SSH2 server
- A small secure shell version 2 server.
-
+Depends: ${shlibs:Depends}
+Suggests: ssh, runit
+Description: lightweight SSH2 server
+ dropbear is a SSH 2 server designed to be small enough to be used in small
+ memory environments, while still being functional and secure enough for
+ general use.
+ .
+ It implements most required features of the SSH 2 protocol, and other
+ features such as X11 and authentication agent forwarding.
+ .
+ See http://matt.ucc.asn.au/dropbear/dropbear.html
diff --git a/debian/copyright.in b/debian/copyright.in
index 015d9ab..79526d3 100644
--- a/debian/copyright.in
+++ b/debian/copyright.in
@@ -1,9 +1,11 @@
 This package was debianized by Grahame Bowland <grahame.angrygoats.net> on
-Tue, 17 Jun 2003 15:04:47 +0800.
+Tue, 17 Jun 2003 15:04:47 +0800, maintained temporarily by Matt Johnston
+<matt@ucc.asn.au>, and was adopted by Gerrit Pape <pape@smarden.org> on
+Sun, 16 May 2004 14:38:33 +0000.
 
 It was downloaded from http://matt.ucc.asn.au/dropbear/
 
-Upstream Author(s): Matt Johnston <matt@ucc.asn.au>
+Upstream Author: Matt Johnston <matt@ucc.asn.au>
 
 Copyright: 
 
diff --git a/debian/dropbear.README.Debian b/debian/dropbear.README.Debian
new file mode 100644
index 0000000..8cdac38
--- /dev/null
+++ b/debian/dropbear.README.Debian
@@ -0,0 +1,41 @@
+Dropbear for Debian
+-------------------
+
+This package will attempt to listen on port 22. If the OpenSSH 
+package ("ssh") is installed, the file /etc/default/dropbear 
+will be set up so that the server does not start by default.
+
+You can run Dropbear concurrently with OpenSSH 'sshd' by 
+modifying /etc/default/dropbear so that "NO_START" is set to 
+"0" and changing the port number that Dropbear runs on. Follow 
+the instructions in the file.
+
+This package suggests you install the "ssh" package. This package 
+provides the "ssh" client program, as well as the "/usr/bin/scp" 
+binary you will need to be able to retrieve files from a server 
+running Dropbear via SCP.
+
+Replacing OpenSSH "sshd" with Dropbear
+--------------------------------------
+
+You will still want to have the "ssh" package installed, as it 
+provides the "ssh" and "scp" binaries. When you install this 
+package, it checks for existing OpenSSH host keys and if found, 
+converts them to the Dropbear format.
+
+If this appears to have worked, you should be able to change over 
+by following these steps:
+
+1. Stop the OpenSSH server
+   % /etc/init.d/ssh stop
+2. Prevent the OpenSSH server from starting in the future
+   % touch /etc/ssh/sshd_not_to_be_run
+3. Modify the Dropbear defaults file, set NO_START to 0 and 
+   ensure DROPBEAR_PORT is set to 22.
+   % editor /etc/default/dropbear
+4. Restart the Dropbear server.
+   % /etc/init.d/dropbear restart
+
+See the Dropbear homepage for more information:
+  http://matt.ucc.asn.au/dropbear/dropbear.html
+
diff --git a/debian/dropbear.conffiles b/debian/dropbear.conffiles
new file mode 100644
index 0000000..6919006
--- /dev/null
+++ b/debian/dropbear.conffiles
@@ -0,0 +1,3 @@
+/etc/init.d/dropbear
+/etc/dropbear/run
+/etc/dropbear/log/run
diff --git a/debian/dropbear.docs b/debian/dropbear.docs
new file mode 100644
index 0000000..599d48c
--- /dev/null
+++ b/debian/dropbear.docs
@@ -0,0 +1,3 @@
+README
+TODO
+debian/README.runit
diff --git a/debian/dropbear.init b/debian/dropbear.init
index 25eda9f..d9578db 100644
--- a/debian/dropbear.init
+++ b/debian/dropbear.init
@@ -1,15 +1,4 @@
-#! /bin/sh
-#
-# skeleton	example file to build /etc/init.d/ scripts.
-#		This file should be used to construct scripts for /etc/init.d.
-#
-#		Written by Miquel van Smoorenburg <miquels@cistron.nl>.
-#		Modified for Debian 
-#		by Ian Murdock <imurdock@gnu.ai.mit.edu>.
-#
-# Version:	@(#)skeleton  1.9  26-Feb-2001  miquels@cistron.nl
-#
-
+#!/bin/sh
 #
 # Do not configure this file. Edit /etc/default/dropbear instead!
 #
@@ -22,54 +11,45 @@ DESC="Dropbear SSH server"
 DROPBEAR_PORT=22
 DROPBEAR_EXTRA_ARGS=
 NO_START=0
-set -e
-test -f /etc/default/dropbear && . /etc/default/dropbear
-
-if [ -n "$DROPBEAR_BANNER" ]; then
-	DROPBEAR_EXTRA_ARGS="$DROPBEAR_EXTRA_ARGS -b $DROPBEAR_BANNER"
-fi
 
-if [ -z "$DROPBEAR_RSAKEY" ]; then
-	DROPBEAR_RSAKEY="/etc/dropbear/dropbear_rsa_host_key"
-fi
-
-if [ -z "$DROPBEAR_DSSKEY" ]; then
-	DROPBEAR_DSSKEY="/etc/dropbear/dropbear_dss_host_key"
-fi
+set -e
 
-test "$NO_START" != "0" && exit 0
+test ! -r /etc/default/dropbear || . /etc/default/dropbear
+test "$NO_START" = "0" || exit 0
+test -x "$DAEMON" || exit 0
+test ! -h /var/service/dropbear || exit 0
 
-test -x $DAEMON || exit 0
+test -z "$DROPBEAR_BANNER" || \
+  DROPBEAR_EXTRA_ARGS="$DROPBEAR_EXTRA_ARGS -b $DROPBEAR_BANNER"
+test -n "$DROPBEAR_RSAKEY" || \
+  DROPBEAR_RSAKEY="/etc/dropbear/dropbear_rsa_host_key"
+test -n "$DROPBEAR_DSSKEY" || \
+  DROPBEAR_DSSKEY="/etc/dropbear/dropbear_dss_host_key"
 
 case "$1" in
   start)
 	echo -n "Starting $DESC: "
-	start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
-		--exec $DAEMON -- -d $DROPBEAR_DSSKEY -r $DROPBEAR_RSAKEY -p $DROPBEAR_PORT $DROPBEAR_EXTRA_ARGS
+	start-stop-daemon --start --quiet --pidfile /var/run/"$NAME".pid \
+	  --exec "$DAEMON" -- -d "$DROPBEAR_DSSKEY" -r "$DROPBEAR_RSAKEY" \
+	    -p "$DROPBEAR_PORT" $DROPBEAR_EXTRA_ARGS
 	echo "$NAME."
 	;;
   stop)
 	echo -n "Stopping $DESC: "
-	start-stop-daemon --stop --quiet --oknodo --pidfile /var/run/$NAME.pid
+	start-stop-daemon --stop --quiet --oknodo --pidfile /var/run/"$NAME".pid
 	echo "$NAME."
 	;;
   restart|force-reload)
-	#
-	#	If the "reload" option is implemented, move the "force-reload"
-	#	option to the "reload" entry above. If not, "force-reload" is
-	#	just the same as "restart".
-	#
 	echo -n "Restarting $DESC: "
-	start-stop-daemon --stop --quiet --oknodo --pidfile \
-		/var/run/$NAME.pid
+	start-stop-daemon --stop --quiet --oknodo --pidfile /var/run/"$NAME".pid
 	sleep 1
-	start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
-		--exec $DAEMON -- -d $DROPBEAR_DSSKEY -r $DROPBEAR_RSAKEY -p $DROPBEAR_PORT $DROPBEAR_EXTRA_ARGS
+	start-stop-daemon --start --quiet --pidfile /var/run/"$NAME".pid \
+	  --exec "$DAEMON" -- -d "$DROPBEAR_DSSKEY" -r "$DROPBEAR_RSAKEY" \
+	    -p "$DROPBEAR_PORT" $DROPBEAR_EXTRA_ARGS
 	echo "$NAME."
 	;;
   *)
 	N=/etc/init.d/$NAME
-	# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
 	echo "Usage: $N {start|stop|restart|force-reload}" >&2
 	exit 1
 	;;
diff --git a/debian/dropbear.postinst b/debian/dropbear.postinst
new file mode 100644
index 0000000..749ffd1
--- /dev/null
+++ b/debian/dropbear.postinst
@@ -0,0 +1,68 @@
+#!/bin/sh
+set -e
+
+test "$1" = 'configure' || exit 0
+test -n "$2" || chown log /etc/dropbear/log/main || true
+
+if test ! -e /etc/dropbear/dropbear_rsa_host_key; then
+  if test -f /etc/ssh/ssh_host_rsa_key; then
+    echo "Converting existing OpenSSH RSA host key to Dropbear format."
+    /usr/lib/dropbear/dropbearconvert openssh dropbear \
+      /etc/ssh/ssh_host_rsa_key /etc/dropbear/dropbear_rsa_host_key
+  else
+    echo "Generating Dropbear RSA key. Please wait."
+    dropbearkey -t rsa -f /etc/dropbear/dropbear_rsa_host_key
+  fi
+fi
+if test ! -e /etc/dropbear/dropbear_dss_host_key; then
+  if test -f /etc/ssh/ssh_host_dsa_key; then
+    echo "Converting existing OpenSSH RSA host key to Dropbear format."
+    /usr/lib/dropbear/dropbearconvert openssh dropbear \
+      /etc/ssh/ssh_host_dsa_key /etc/dropbear/dropbear_dss_host_key
+  else
+    echo "Generating Dropbear DSS key. Please wait."
+    dropbearkey -t dss -f /etc/dropbear/dropbear_dss_host_key
+  fi
+fi
+if test ! -s /etc/default/dropbear; then 
+  # check whether OpenSSH seems to be installed.
+  if test -x /usr/sbin/sshd; then
+    cat <<EOT
+OpenSSH appears to be installed.  Setting /etc/default/dropbear so that
+Dropbear will not start by default.  Edit this file to change this behaviour.
+
+EOT
+    cat >>/etc/default/dropbear <<EOT
+# disabled because OpenSSH is installed
+# change to NO_START=0 to enable Dropbear
+NO_START=1
+
+EOT
+  fi
+  cat >>/etc/default/dropbear <<EOT
+# the TCP port that Dropbear listens on
+DROPBEAR_PORT=22
+
+# any additional arguments for Dropbear
+DROPBEAR_EXTRA_ARGS=
+
+# specify an optional banner file containing a message to be
+# sent to clients before they connect, such as "/etc/issue.net"
+DROPBEAR_BANNER=""
+
+# RSA hostkey file (default: /etc/dropbear/dropbear_rsa_host_key)
+#DROPBEAR_RSAKEY="/etc/dropbear/dropbear_rsa_host_key"
+
+# DSS hostkey file (default: /etc/dropbear/dropbear_dss_host_key)
+#DROPBEAR_DSSKEY="/etc/dropbear/dropbear_dss_host_key"
+EOT
+fi
+
+if test -x /etc/init.d/dropbear; then
+  update-rc.d dropbear defaults >/dev/null
+  if test -x /usr/sbin/invoke-rc.d; then
+    invoke-rc.d dropbear start
+  else
+    /etc/init.d/dropbear start
+  fi
+fi
diff --git a/debian/dropbear.postrm b/debian/dropbear.postrm
new file mode 100644
index 0000000..d09dab0
--- /dev/null
+++ b/debian/dropbear.postrm
@@ -0,0 +1,12 @@
+#! /bin/sh
+set -e
+
+test "$1" = 'purge' || exit 0
+if test -e /etc/dropbear; then
+  rm -f /etc/dropbear/dropbear_rsa_host_key
+  rm -f /etc/dropbear/dropbear_dss_host_key
+  rmdir --ignore-fail-on-non-empty /etc/dropbear
+fi
+update-rc.d dropbear remove >/dev/null
+rm -f /etc/default/dropbear
+rm -rf /etc/dropbear/supervise /etc/dropbear/log/supervise
diff --git a/debian/dropbear.prerm b/debian/dropbear.prerm
new file mode 100644
index 0000000..89bb5b6
--- /dev/null
+++ b/debian/dropbear.prerm
@@ -0,0 +1,11 @@
+#!/bin/sh
+set -u
+
+test "$1" = 'remove' || test "$1" = 'deconfigure' || exit 0
+if test -x /etc/init.d/dropbear; then
+  if test -x /usr/sbin/invoke-rc.d; then
+    invoke-rc.d dropbear stop
+  else
+    /etc/init.d/dropbear stop
+  fi
+fi
diff --git a/debian/implicit b/debian/implicit
new file mode 100644
index 0000000..d28b629
--- /dev/null
+++ b/debian/implicit
@@ -0,0 +1,79 @@
+# $Id: implicit,v 1.1 2004/06/16 05:08:32 matt Exp $
+
+.PHONY: deb-checkdir deb-checkuid
+
+deb-checkdir:
+	@test -e debian/control || sh -cx '! : wrong directory'
+deb-checkuid:
+	@test "`id -u`" -eq 0 || sh -cx '! : need root privileges'
+
+%.deb: %.deb-docs %.deb-DEBIAN
+	@rm -f $*.deb $*.deb-checkdir $*.deb-docs $*.deb-docs-base \
+	  $*.deb-docs-docs $*.deb-docs-examples $*.deb-DEBIAN \
+	  $*.deb-DEBIAN-dir $*.deb-DEBIAN-scripts $*.deb-DEBIAN-md5sums
+
+%.deb-checkdir:
+	@test -d debian/$* || sh -cx '! : directory debian/$* missing'
+	@test "`id -u`" -eq 0 || sh -cx '! : need root privileges'
+
+%.deb-docs-base:
+	: implicit
+	@rm -f debian/$*/usr/share/doc/$*/* || :
+	@install -d -m0755 debian/$*/usr/share/doc/$*
+	: debian/$*/usr/share/doc/$*/
+	@sh -cx 'install -m0644 debian/copyright debian/$*/usr/share/doc/$*/'
+	@sh -cx 'install -m0644 debian/changelog \
+	  debian/$*/usr/share/doc/$*/changelog.Debian'
+	@test ! -r changelog || \
+	  sh -cx 'install -m0644 changelog debian/$*/usr/share/doc/$*/'
+	@test -r debian/$*/usr/share/doc/$*/changelog || \
+	  sh -cx 'mv debian/$*/usr/share/doc/$*/changelog.Debian \
+	    debian/$*/usr/share/doc/$*/changelog'
+	@gzip -9 debian/$*/usr/share/doc/$*/changelog*
+%.deb-docs-docs:
+	@for i in `cat debian/$*.docs 2>/dev/null || :`; do \
+	  sh -cx "install -m0644 $$i debian/$*/usr/share/doc/$*/" || exit 1; \
+	done
+	@test ! -r debian/$*.README.Debian || \
+	  sh -cx 'install -m0644 debian/$*.README.Debian \
+	    debian/$*/usr/share/doc/$*/README.Debian'
+	@if test -r debian/$*.NEWS.Debian; then \
+	  sh -cx 'install -m0644 debian/$*.NEWS.Debian \
+	    debian/$*/usr/share/doc/$*/NEWS.Debian && \
+	      gzip -9 debian/$*/usr/share/doc/$*/NEWS.Debian'; \
+	fi
+%.deb-docs-examples:
+	@rm -rf debian/$*/usr/share/doc/$*/examples
+	: debian/$*/usr/share/doc/$*/examples/
+	@test ! -r debian/$*.examples || \
+	  install -d -m0755 debian/$*/usr/share/doc/$*/examples
+	@for i in `cat debian/$*.examples 2>/dev/null || :`; do \
+	  sh -cx "install -m0644 $$i debian/$*/usr/share/doc/$*/examples/" \
+	    || exit 1; \
+	done
+%.deb-docs: %.deb-checkdir %.deb-docs-base %.deb-docs-docs %.deb-docs-examples
+	: debian/$*/usr/share/doc/$*/ ok
+
+%.deb-DEBIAN-base:
+	@rm -rf debian/$*/DEBIAN
+	: debian/$*/DEBIAN/
+	@install -d -m0755 debian/$*/DEBIAN
+	@for i in conffiles shlibs; do \
+	  test ! -r debian/$*.$$i || \
+	    sh -cx "install -m0644 debian/$*.$$i debian/$*/DEBIAN/$$i" \
+	      || exit 1; \
+	done
+%.deb-DEBIAN-scripts:
+	@for i in preinst prerm postinst postrm; do \
+	  test ! -r debian/$*.$$i || \
+	    sh -cx "install -m0755 debian/$*.$$i debian/$*/DEBIAN/$$i" \
+	      || exit 1; \
+	done
+%.deb-DEBIAN-md5sums:
+	: debian/$*/DEBIAN/md5sums
+	@rm -f debian/$*/DEBIAN/md5sums
+	@cd debian/$* && find * -path 'DEBIAN' -prune -o \
+	  -type f -exec md5sum {} >>DEBIAN/md5sums \;
+%.deb-DEBIAN: %.deb-checkdir %.deb-DEBIAN-base %.deb-DEBIAN-scripts \
+	  %.deb-DEBIAN-md5sums
+	: debian/$*/DEBIAN/ ok
diff --git a/debian/rules b/debian/rules
index 4d73093..ee7b14a 100644
--- a/debian/rules
+++ b/debian/rules
@@ -1,134 +1,96 @@
 #!/usr/bin/make -f
-# Sample debian/rules that uses debhelper.
-# GNU copyright 1997 to 1999 by Joey Hess.
-#
-# Modified to make a template file for a multi-binary package with separated
-# build-arch and build-indep targets  by Bill Allombert 2001
 
-# Uncomment this to turn on verbose mode.
-#export DH_VERBOSE=1
+#export DH_OPTIONS
+DEB_HOST_GNU_TYPE ?=$(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?=$(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
 
-# This has to be exported to make some magic below work.
-export DH_OPTIONS
-
-# These are used for cross-compiling and for saving the configure script
-# from having to guess our platform (since we know it already)
-DEB_HOST_GNU_TYPE   ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
-DEB_BUILD_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
-
-
-CFLAGS = -Wall -g
+STRIP =strip
+ifneq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+  STRIP =: nostrip
+endif
 
+CFLAGS =-Wall -g
 ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
-	CFLAGS += -O0
+  CFLAGS +=-O0
 else
-	CFLAGS += -O2
-endif
-ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
-	INSTALL_PROGRAM += -s
+  CFLAGS +=-O2
 endif
 
-config.status: configure
-	dh_testdir
-	# Add here commands to configure the package.
-	CFLAGS='-DSFTPSERVER_PATH="\"/usr/lib/sftp-server\""' ./configure --host=$(DEB_HOST_GNU_TYPE) --build=$(DEB_BUILD_GNU_TYPE) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
-
-
-#Architecture 
-build: build-arch #build-indep
-
-build-arch: build-arch-stamp
-build-arch-stamp:  config.status
-	
-	# Add here commands to compile the arch part of the package.
-	$(MAKE) CC=gcc LD=gcc
-
-build-indep: build-indep-stamp
-build-indep-stamp:  config.status
-	
-	# Add here commands to compile the indep part of the package.
-	#$(MAKE) doc
-
-clean:
-	dh_testdir
-	dh_testroot
-	rm -f build-arch-stamp build-indep-stamp config-stamp
-
-	# Add here commands to clean up after the build process.
-	-$(MAKE) clean
-ifneq "$(wildcard /usr/share/misc/config.sub)" ""
-	cp -f /usr/share/misc/config.sub config.sub
-endif
-ifneq "$(wildcard /usr/share/misc/config.guess)" ""
-	cp -f /usr/share/misc/config.guess config.guess
+CC =gcc
+ifneq (,$(findstring diet,$(DEB_BUILD_OPTIONS)))
+  CC =diet -v -Os gcc
 endif
 
-	
-	dh_clean
-
-install: install-indep install-arch
-install-indep:
-	dh_testdir
-	dh_testroot
-	dh_clean -k -i
-	dh_installdirs -i
-	
-	# Add here commands to install the indep part of the package into
-	# debian/<package>-doc.
-	#INSTALLDOC#
-	
-	dh_install -i
-
-install-arch:
-	dh_testdir
-	dh_testroot
-	dh_clean -k -a
-	dh_installdirs -a
-	dh_installdirs /etc/dropbear
-
-	# Add here commands to install the arch part of the package into 
-	# debian/tmp.
-	$(MAKE) install prefix=$(CURDIR)/debian/dropbear/usr
-
-	dh_install -a
-# Must not depend on anything. This is to be called by
-# binary-arch/binary-multi
-# in another 'make' thread.
-binary-common:
-	cat $(CURDIR)/debian/copyright.in $(CURDIR)/LICENSE > $(CURDIR)/debian/copyright
-	dh_testdir
-	dh_testroot
-	dh_installchangelogs CHANGES
-	dh_installdocs
-	dh_installexamples
-#	dh_installmenu
-#	dh_installdebconf	
-#	dh_installlogrotate	
-#	dh_installemacsen
-#	dh_installpam
-#	dh_installmime
-	dh_installinit
-#	dh_installcron
-#	dh_installinfo
-	dh_installman
-	dh_link
-	dh_strip
-	dh_compress 
-	dh_fixperms
-#	dh_perl
-#	dh_python
-	dh_makeshlibs
-	dh_installdeb
-	dh_gencontrol
-	dh_md5sums
-	dh_builddeb
-# Build architecture independant packages using the common target.
-binary-indep: build-indep install-indep
-	$(MAKE) -f debian/rules DH_OPTIONS=-i binary-common
-
-# Build architecture dependant packages using the common target.
-binary-arch: build-arch install-arch
-	$(MAKE) -f debian/rules DH_OPTIONS=-a binary-common
-
-binary: binary-arch #binary-indep
-.PHONY: build clean binary-indep binary-arch binary install install-indep install-arch 
+DIR=`pwd`/debian/dropbear
+
+patch: deb-checkdir patch-stamp
+patch-stamp:
+#	no patches for now
+#	for i in debian/diff/*.diff; do patch -p0 <$$i || exit 1; done
+	touch patch-stamp
+
+config.status: patch-stamp configure
+	CFLAGS="$(CFLAGS)"' -DSFTPSERVER_PATH="\"/usr/lib/sftp-server\""' \
+	  ./configure --host="$(DEB_HOST_GNU_TYPE)" \
+	    --build="$(DEB_BUILD_GNU_TYPE)" --prefix=/usr \
+	    --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info
+
+build: deb-checkdir build-stamp
+build-stamp: config.status
+	$(MAKE) CC="$(CC)" LD="$(CC)"
+	touch build-stamp
+
+clean: deb-checkdir deb-checkuid
+	-$(MAKE) distclean
+#	test ! -e patch-stamp || \
+#	  for i in debian/diff/*.diff; do patch -p0 -R <$$i; done
+	rm -f patch-stamp build-stamp config.log config.status
+	rm -rf "$(DIR)"
+	rm -f debian/files debian/substvars debian/copyright changelog
+
+install: deb-checkdir deb-checkuid build-stamp
+	rm -rf "$(DIR)"
+	install -d -m0755 "$(DIR)"/etc/dropbear
+	# programs
+	install -d -m0755 "$(DIR)"/usr/sbin
+	install -m0755 dropbear "$(DIR)"/usr/sbin/dropbear
+	install -d -m0755 "$(DIR)"/usr/bin
+	install -m0755 dropbearkey "$(DIR)"/usr/bin/dropbearkey
+	install -d -m0755 "$(DIR)"/usr/lib/dropbear
+	install -m0755 dropbearconvert \
+	  "$(DIR)"/usr/lib/dropbear/dropbearconvert
+	$(STRIP) -R .comment -R .note "$(DIR)"/usr/sbin/* \
+	  "$(DIR)"/usr/bin/* "$(DIR)"/usr/lib/dropbear/*
+	# init and run scripts
+	install -d -m0755 "$(DIR)"/etc/init.d
+	install -m0755 debian/dropbear.init "$(DIR)"/etc/init.d/dropbear
+	install -m0755 debian/service/run "$(DIR)"/etc/dropbear/run
+	install -d -m0755 "$(DIR)"/etc/dropbear/log
+	install -m0755 debian/service/log "$(DIR)"/etc/dropbear/log/run
+	ln -s /var/log/dropbear "$(DIR)"/etc/dropbear/log/main
+	ln -s /var/run/dropbear "$(DIR)"/etc/dropbear/supervise
+	ln -s /var/run/dropbear.log "$(DIR)"/etc/dropbear/log/supervise
+	# man pages
+	install -d -m0755 "$(DIR)"/usr/share/man/man8
+	for i in dropbear.8 dropbearkey.8; do \
+	  install -m644 $$i "$(DIR)"/usr/share/man/man8/ || exit 1; \
+	done
+	gzip -9 "$(DIR)"/usr/share/man/man8/*.8
+	# copyright, changelog
+	cat debian/copyright.in LICENSE >debian/copyright
+	ln -s CHANGES changelog
+
+binary-indep:
+
+binary-arch: install dropbear.deb
+	test "$(CC)" != 'gcc' || \
+	  dpkg-shlibdeps "$(DIR)"/usr/sbin/* "$(DIR)"/usr/bin/* \
+	    "$(DIR)"/usr/lib/dropbear/*
+	dpkg-gencontrol -isp -pdropbear -P"$(DIR)"
+	dpkg -b "$(DIR)" ..
+
+binary: binary-arch binary-indep
+
+.PHONY: patch build clean install binary-indep binary-arch binary
+
+include debian/implicit
diff --git a/debian/service/log b/debian/service/log
new file mode 100644
index 0000000..2ffb13d
--- /dev/null
+++ b/debian/service/log
@@ -0,0 +1,2 @@
+#!/bin/sh
+exec chpst -udropbearlog svlogd -tt ./main
diff --git a/debian/service/run b/debian/service/run
new file mode 100644
index 0000000..f208085
--- /dev/null
+++ b/debian/service/run
@@ -0,0 +1,3 @@
+#!/bin/sh
+exec 2>&1
+exec dropbear -d ./dropbear_dss_host_key -r ./dropbear_rsa_host_key -F -E -p 22