/* * nandwrite and nanddump ported to busybox from mtd-utils * * Author: Baruch Siach <baruch@tkos.co.il>, Orex Computed Radiography * * Licensed under GPLv2, see file LICENSE in this source tree. * * TODO: add support for large (>4GB) MTD devices */ //config:config NANDWRITE //config: bool "nandwrite (5.9 kb)" //config: default y //config: select PLATFORM_LINUX //config: help //config: Write to the specified MTD device, with bad blocks awareness //config: //config:config NANDDUMP //config: bool "nanddump (6.3 kb)" //config: default y //config: select PLATFORM_LINUX //config: help //config: Dump the content of raw NAND chip //applet:IF_NANDWRITE(APPLET(nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP)) //applet:IF_NANDDUMP(APPLET_ODDNAME(nanddump, nandwrite, BB_DIR_USR_SBIN, BB_SUID_DROP, nanddump)) //kbuild:lib-$(CONFIG_NANDWRITE) += nandwrite.o //kbuild:lib-$(CONFIG_NANDDUMP) += nandwrite.o //usage:#define nandwrite_trivial_usage //usage: "[-np] [-s ADDR] MTD_DEVICE [FILE]" //usage:#define nandwrite_full_usage "\n\n" //usage: "Write to MTD_DEVICE\n" //usage: "\n -n Write without ecc" //usage: "\n -p Pad to page size" //usage: "\n -s ADDR Start address" //usage:#define nanddump_trivial_usage //usage: "[-no]" IF_LONG_OPTS(" [--bb padbad|skipbad]") " [-s ADDR] [-l LEN] [-f FILE] MTD_DEVICE" //usage:#define nanddump_full_usage "\n\n" //usage: "Dump MTD_DEVICE\n" //usage: "\n -n Read without ecc" //usage: "\n -o Dump oob data" //usage: "\n -s ADDR Start address" //usage: "\n -l LEN Length" //usage: "\n -f FILE Dump to file ('-' for stdout)" //usage: IF_LONG_OPTS( //usage: "\n --bb METHOD" //usage: "\n skipbad: skip bad blocks" //usage: "\n padbad: substitute bad blocks by 0xff (default)" //usage: ) #include "libbb.h" #include <mtd/mtd-user.h> #define IS_NANDDUMP (ENABLE_NANDDUMP && (!ENABLE_NANDWRITE || (applet_name[4] == 'd'))) #define IS_NANDWRITE (ENABLE_NANDWRITE && (!ENABLE_NANDDUMP || (applet_name[4] != 'd'))) #define OPT_p (1 << 0) /* nandwrite only */ #define OPT_o (1 << 0) /* nanddump only */ #define OPT_n (1 << 1) #define OPT_s (1 << 2) #define OPT_f (1 << 3) #define OPT_l (1 << 4) #define OPT_bb (1 << 5) /* must be the last one in the list */ #define BB_PADBAD (1 << 0) #define BB_SKIPBAD (1 << 1) /* helper for writing out 0xff for bad blocks pad */ static void dump_bad(struct mtd_info_user *meminfo, unsigned len, int oob) { unsigned char buf[meminfo->writesize]; unsigned count; /* round len to the next page only if len is not already on a page */ len = ((len - 1) | (meminfo->writesize - 1)) + 1; memset(buf, 0xff, sizeof(buf)); for (count = 0; count < len; count += meminfo->writesize) { xwrite(STDOUT_FILENO, buf, meminfo->writesize); if (oob) xwrite(STDOUT_FILENO, buf, meminfo->oobsize); } } static unsigned next_good_eraseblock(int fd, struct mtd_info_user *meminfo, unsigned block_offset) { while (1) { loff_t offs; if (block_offset >= meminfo->size) { if (IS_NANDWRITE) bb_error_msg_and_die("not enough space in MTD device"); return block_offset; /* let the caller exit */ } offs = block_offset; if (xioctl(fd, MEMGETBADBLOCK, &offs) == 0) return block_offset; /* ioctl returned 1 => "bad block" */ if (IS_NANDWRITE) printf("Skipping bad block at 0x%08x\n", block_offset); block_offset += meminfo->erasesize; } } int nandwrite_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; int nandwrite_main(int argc UNUSED_PARAM, char **argv) { /* Buffer for OOB data */ unsigned char *oobbuf; unsigned opts; unsigned bb_method = BB_SKIPBAD; int fd; ssize_t cnt; unsigned mtdoffset, meminfo_writesize, blockstart, limit; unsigned end_addr = ~0; struct mtd_info_user meminfo; struct mtd_oob_buf oob; unsigned char *filebuf; const char *opt_s = "0", *opt_f = "-", *opt_l, *opt_bb; if (IS_NANDDUMP) { opt_complementary = "=1"; #if ENABLE_LONG_OPTS applet_long_options = "bb\0" Required_argument "\xff"; /* no short equivalent */ #endif opts = getopt32(argv, "ons:f:l:", &opt_s, &opt_f, &opt_l, &opt_bb); } else { /* nandwrite */ opt_complementary = "-1:?2"; opts = getopt32(argv, "pns:", &opt_s); } argv += optind; if (IS_NANDWRITE && argv[1]) opt_f = argv[1]; if (!LONE_DASH(opt_f)) { int tmp_fd = xopen(opt_f, IS_NANDDUMP ? O_WRONLY | O_TRUNC | O_CREAT : O_RDONLY ); xmove_fd(tmp_fd, IS_NANDDUMP ? STDOUT_FILENO : STDIN_FILENO); } fd = xopen(argv[0], IS_NANDWRITE ? O_RDWR : O_RDONLY); xioctl(fd, MEMGETINFO, &meminfo); if (opts & OPT_n) xioctl(fd, MTDFILEMODE, (void *)MTD_FILE_MODE_RAW); mtdoffset = xstrtou(opt_s, 0); if (IS_NANDDUMP && (opts & OPT_l)) { unsigned length = xstrtou(opt_l, 0); if (length < meminfo.size - mtdoffset) end_addr = mtdoffset + length; } if (IS_NANDDUMP && (opts & OPT_bb)) { if (strcmp("skipbad", opt_bb) == 0) bb_method = BB_SKIPBAD; else if (strcmp("padbad", opt_bb) == 0) bb_method = BB_PADBAD; else bb_show_usage(); } /* Pull it into a CPU register (hopefully) - smaller code that way */ meminfo_writesize = meminfo.writesize; if (mtdoffset & (meminfo_writesize - 1)) bb_error_msg_and_die("start address is not page aligned"); filebuf = xmalloc(meminfo_writesize); oobbuf = xmalloc(meminfo.oobsize); oob.start = 0; oob.length = meminfo.oobsize; oob.ptr = oobbuf; blockstart = mtdoffset & ~(meminfo.erasesize - 1); if (blockstart != mtdoffset) { unsigned tmp; /* mtdoffset is in the middle of an erase block, verify that * this block is OK. Advance mtdoffset only if this block is * bad. */ tmp = next_good_eraseblock(fd, &meminfo, blockstart); if (tmp != blockstart) { /* bad block(s), advance mtdoffset */ if (IS_NANDDUMP) { if (bb_method == BB_PADBAD) { int bad_len = MIN(tmp, end_addr) - mtdoffset; dump_bad(&meminfo, bad_len, opts & OPT_o); } /* with option skipbad, increase the total length */ if (bb_method == BB_SKIPBAD) { end_addr += (tmp - blockstart); } } mtdoffset = tmp; } } cnt = -1; limit = MIN(meminfo.size, end_addr); while (mtdoffset < limit) { int input_fd = IS_NANDWRITE ? STDIN_FILENO : fd; int output_fd = IS_NANDWRITE ? fd : STDOUT_FILENO; blockstart = mtdoffset & ~(meminfo.erasesize - 1); if (blockstart == mtdoffset) { /* starting a new eraseblock */ mtdoffset = next_good_eraseblock(fd, &meminfo, blockstart); if (IS_NANDWRITE) printf("Writing at 0x%08x\n", mtdoffset); else if (mtdoffset > blockstart) { if (bb_method == BB_PADBAD) { /* dump FF padded bad block */ int bad_len = MIN(mtdoffset, limit) - blockstart; dump_bad(&meminfo, bad_len, opts & OPT_o); } else if (bb_method == BB_SKIPBAD) { /* for skipbad, increase the length */ if ((end_addr + mtdoffset - blockstart) > end_addr) end_addr += (mtdoffset - blockstart); else end_addr = ~0; limit = MIN(meminfo.size, end_addr); } } if (mtdoffset >= limit) break; } xlseek(fd, mtdoffset, SEEK_SET); /* get some more data from input */ cnt = full_read(input_fd, filebuf, meminfo_writesize); if (cnt == 0) { /* even with -p, we do not pad past the end of input * (-p only zero-pads last incomplete page) */ break; } if (cnt < meminfo_writesize) { if (IS_NANDDUMP) bb_error_msg_and_die("short read"); if (!(opts & OPT_p)) bb_error_msg_and_die("input size is not rounded up to page size, " "use -p to zero pad"); /* zero pad to end of write block */ memset(filebuf + cnt, 0, meminfo_writesize - cnt); } xwrite(output_fd, filebuf, meminfo_writesize); if (IS_NANDDUMP && (opts & OPT_o)) { /* Dump OOB data */ oob.start = mtdoffset; xioctl(fd, MEMREADOOB, &oob); xwrite(output_fd, oobbuf, meminfo.oobsize); } mtdoffset += meminfo_writesize; if (cnt < meminfo_writesize) break; } if (IS_NANDWRITE && cnt != 0) { /* We filled entire MTD, but did we reach EOF on input? */ if (full_read(STDIN_FILENO, filebuf, meminfo_writesize) != 0) { /* no */ bb_error_msg_and_die("not enough space in MTD device"); } } if (ENABLE_FEATURE_CLEAN_UP) { free(filebuf); close(fd); } return EXIT_SUCCESS; }