summaryrefslogtreecommitdiffhomepage
path: root/networking/ntpd.c
AgeCommit message (Collapse)Author
2017-04-17Spelling fixes in comments, documentation, tests and examplesDenys Vlasenko
By klemens <ka7@github.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-19ntpd: print result of hostname resolutionDenys Vlasenko
This is particularly useful if hostname resolution is triggered by host non-reachability: I saw this in real-life, without the message it is not at all obvious that IP that we use for a specific host has changed. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2017-01-06ntpd: improve postponed hostname resolutionNatanael Copa
Run the namelookup from the main loop so a misspelled first ntp server name does not block everything forever. This fixes the following situation which would block forever: $ sudo ./busybox ntpd -dn -p foobar -p pool.ntp.org ntpd: bad address 'foobar' ntpd: bad address 'foobar' ntpd: bad address 'foobar' ... New behavior: ntpd: bad address 'foobar' ntpd: sending query to 137.190.2.4 ntpd: reply from 137.190.2.4: offset:-1.009775 delay:0.175550 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x01 ntpd: sending query to 137.190.2.4 ntpd: reply from 137.190.2.4: offset:-1.009605 delay:0.175461 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x03 ntpd: sending query to 137.190.2.4 ntpd: reply from 137.190.2.4: offset:-1.005327 delay:0.167027 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x07 ntpd: sending query to 137.190.2.4 ntpd: bad address 'foobar' ntpd: reply from 137.190.2.4: offset:-1.046349 delay:0.248705 status:0x24 strat:1 refid:0x00535047 rootdelay:0.000000 reach:0x0f This patch is based on Kaarle Ritvanens work. http://lists.busybox.net/pipermail/busybox/2016-May/084197.html function old new delta ntpd_main 1061 1079 +18 ntp_init 556 560 +4 resolve_peer_hostname 81 75 -6 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 22/-6) Total: 16 bytes Signed-off-by: Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi> Signed-off-by: Natanael Copa <ncopa@alpinelinux.org> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-11-23Convert all networking/* applets to "new style" applet definitionsDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-08-01ntpd: respond only to client and symmetric active packetsMiroslav Lichvar
The busybox NTP implementation doesn't check the NTP mode of packets received on the server port and responds to any packet with the right size. This includes responses from another NTP server. An attacker can send a packet with a spoofed source address in order to create an infinite loop of responses between two busybox NTP servers. Adding more packets to the loop increases the traffic between the servers until one of them has a fully loaded CPU and/or network. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-06getopt32: add new syntax of 'o:+' and 'o:*' for -o NUM and -o LISTDenys Vlasenko
In many cases, this aqllows to drop use of opt_complementary. Approximately -400 bytes: function old new delta getopt32 1423 1502 +79 opt_string 17 18 +1 OPT_STR 24 25 +1 uniq_main 416 406 -10 timeout_main 279 269 -10 sulogin_main 270 260 -10 readprofile_main 1825 1815 -10 ps_main 543 533 -10 pidof_main 245 235 -10 pgrep_main 611 601 -10 od_main 2600 2590 -10 mkfs_minix_main 2684 2674 -10 mkfs_ext2_main 2603 2593 -10 microcom_main 712 702 -10 makemime_main 315 305 -10 ionice_main 282 272 -10 inetd_main 2074 2064 -10 ifplugd_main 1144 1134 -10 halt_main 353 343 -10 getopt_main 636 626 -10 fdisk_main 2854 2844 -10 env_main 206 196 -10 dmesg_main 319 309 -10 conspy_main 1214 1204 -10 awk_main 981 971 -10 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 3/22 up/down: 81/-220) Total: -139 bytes text data bss dec hex filename 919373 906 14060 934339 e41c3 busybox_old 918969 906 14060 933935 e402f busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-07-03ntpd: daemonize before DNS resolutionDenys Vlasenko
This resolves the following use case problem: "I start ntpd by default from /etc/init.d There might be no working network connection (not configured properly for whatever reason, hardware problems, whatelse). With busybox 1.25 ntpd seems to loop forever if now NTP servers are found, blocking the boot process and I never get a login to solve a possible pb or to do a first time configuration." Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-06-06ntpd: retry initial DNS resolution (forever, no timeout for now).Denys Vlasenko
Some users start ntpd on boot, and don't babysit it. If it dies because DNS is not yet up and therefore NTP servers can't be found, users are not happy. Example behavior with a peer name which can't be resolved: ntpd: bad address 'qwe.rty.ghj.kl' ...5 sec... ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ntpd: bad address 'qwe.rty.ghj.kl' ... Based on the patch by Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi> function old new delta resolve_peer_hostname - 81 +81 ntpd_main 1130 1061 -69 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 0/1 up/down: 81/-69) Total: 12 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04ntpd: if peer does not reply anymore, try re-resolving its hostnameDenys Vlasenko
function old new delta ntpd_main 1053 1130 +77 add_peers 166 195 +29 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-04ntpd: do not use a peer more than once (say, if two peers resolve to the ↵Denys Vlasenko
same IP) function old new delta add_peers 98 166 +68 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-03-03ntpd: more informative poll lowering messageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-24ntpd: print packet delay in clock update messageDenys Vlasenko
function old new delta update_local_clock 820 826 +6 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-10ntpd: shorter messageDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2016-02-10ntpd: step when |offset| > 1 sec, not 0.125 secDenys Vlasenko
update_local_clock 769 820 +51 recv_and_process_peer_pkt 838 862 +24 reset_peer_stats 137 133 -4 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/1 up/down: 75/-4) Total: 71 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-08-24libbb: add setsockopt_foo helpersDenys Vlasenko
function old new delta setsockopt_int - 23 +23 do_load 918 934 +16 setsockopt_SOL_SOCKET_int - 14 +14 setsockopt_keepalive - 10 +10 setsockopt_SOL_SOCKET_1 - 10 +10 buffer_fill_and_print 169 178 +9 setsockopt_1 - 8 +8 nfsmount 3560 3566 +6 redirect 1277 1282 +5 tcpudpsvd_main 1782 1786 +4 d6_send_kernel_packet 272 275 +3 i2cget_main 380 382 +2 ed_main 2544 2545 +1 scan_recursive 380 378 -2 nbdclient_main 492 490 -2 hash_find 235 233 -2 cmdputs 334 332 -2 parse_command 1443 1440 -3 static.two 4 - -4 ntpd_main 1039 1035 -4 const_int_1 4 - -4 const_IPTOS_LOWDELAY 4 - -4 RCVBUF 4 - -4 ntp_init 474 469 -5 change_listen_mode 316 310 -6 uevent_main 416 409 -7 arping_main 1697 1690 -7 telnet_main 1612 1603 -9 socket_want_pktinfo 42 33 -9 setsockopt_reuseaddr 21 10 -11 setsockopt_broadcast 21 10 -11 httpd_main 772 757 -15 get_remote_transfer_fd 109 94 -15 make_new_session 503 487 -16 ftpd_main 2177 2160 -17 read_bunzip 1896 1866 -30 common_traceroute_main 4099 4058 -41 common_ping_main 1836 1783 -53 ------------------------------------------------------------------------------ (add/remove: 5/4 grow/shrink: 8/21 up/down: 111/-283) Total: -172 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-07-13Removes stray empty line from codeManinder Singh
This patch removes stray empty line from busybox code reported by script find_stray_empty_lines Signed-off-by: Maninder Singh <maninder1.s@samsung.com> Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-05ntpd: tweak help textDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-03-02ntpd: chnage help text about -l to say that it doesn't disable client codeDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-01-29ntpd: get rid of G.initial_poll_completeDenys Vlasenko
This speeds up syncing - now happens only just two replies from a peer. Especially useful for "ntpd -q". Shouldn't have ill effects: if we chose a bad peer, we will discover it later and switch to another one. The code is even smaller this way. Suggested by Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2015-01-04ntpd: relicense ntpd applet to ISC-style licenseAdam Tkac
OpenNTPd is licensed under ISC-style license so it's good idea to keep ntpd applet under same license to avoid mess, instead of having our changes to be under GPL. Names of original code's authors are added. Signed-off-by: Adam Tkac <vonsch@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-05ntpd: calculate offset to jitter ratio before updating jitterMiroslav Lichvar
The offset to jitter ratio is now calculated before updating jitter to make the test more sensitive. function old new delta ntp_init 460 474 +14 update_local_clock 752 764 +12 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 26/0) Total: 26 bytes Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-10-02ntpd: don't stay at short polling intervalMiroslav Lichvar
To avoid polling servers frequently slowly increase the interval up to BIGPOLL when - no replies are received from a peer - no source can be selected - peer claims to be unsynchronized (e.g. we are polling it too frequently) When recv() returns with an error, drop code to try to continue on network errors: I'm not convinced those cases happen in real life. function old new delta recv_and_process_peer_pkt 919 838 -81 Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-27ntpd: be less eager to use shorter poll intervalsDenys Vlasenko
* on step, poll interval drops to 8.5 mins instead of 32 seconds * on total loss of all replies (no replies from any peer for last 8 requests), also drop poll interval to 8.5 mins instead of 32 seconds * on send abd recv errors, RETRY_INTERVAL is now 32 seconds, not 5 seconds * on timing out listening to reply, instead of unconditional shortening poll interval by x4, clamp it to NOREPLY_INTERVAL (512 seconds) * if a largish offset is seen, clamp nexp poll interval to 128 seconds, not 64 seconds function old new delta clamp_pollexp_and_set_MAXSTRAT - 37 +37 recv_and_process_peer_pkt 861 869 +8 poll_interval 52 48 -4 update_local_clock 762 752 -10 ntpd_main 1063 1050 -13 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 1/3 up/down: 45/-27) Total: 18 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24ntpd: split out poll adjusting codeMiroslav Lichvar
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-09-24ntpd: don't wait for good offset before disabling burst modeMiroslav Lichvar
The burst mode needs to be stopped even when no replies are received. Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-07-15ntpd: add support for -I IFACEDenys Vlasenko
function old new delta packed_usage 29908 29947 +39 ntp_init 428 460 +32 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 71/0) Total: 71 bytes Signed-off-by: Nikolaus Froehlich <nikolaus@mathematik.uni-marburg.de> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-04-20ntpd: fix wrong delay value in one of the printed messagesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-04-19ntpd: truly ignore high delay packetDenys Vlasenko
Before this cahnge, sometimes they were used after the next packet from another peer was received, because we did updare some peer stats from high delay packet before dropping it. function old new delta recv_and_process_peer_pkt 922 966 +44 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-03-23ntpd: add optional support for /etc/ntp.confDenys Vlasenko
function old new delta add_peers - 98 +98 packed_usage 29470 29511 +41 ntp_init 407 428 +21 pw_encrypt 14 27 +13 ------------------------------------------------------------------------------ (add/remove: 1/0 grow/shrink: 3/0 up/down: 173/0) Total: 173 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-03-05use [s]rand(), not [s]random()Denys Vlasenko
rand() is the most standard C library function, and on uclibc they are the same. I guess they are the same in most todays' libc... Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-02-09htpd: trivial simplification in random interval selectionDenys Vlasenko
function old new delta poll_interval 57 52 -5 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-01-20ntpd: remove now unnecessary check for IP_PKTINFO definitionDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-01-20ntpd: fix compilation warningsBartosz Golaszewski
GCC complained about since_last_update being set but not used. Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2014-01-08ntpd: adjust last packet's recv time after a stepDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-12-08ntpd: speed up resyncing if our clock is seriously offDenys Vlasenko
function old new delta recv_and_process_peer_pkt 892 922 +30 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-12-07ntpd: do not invalidate datapoints after stepDenys Vlasenko
Used to set p->filter_datapoint[i].d_dispersion = MAXDISP and clear reachable bits, but this proved to be too agressive: after step (tested with suspinding laptop for ~30 secs), this caused all previous data to be considered invalid, making us needing to collect full ~8 datapoins per peer after step in order to start trusting them. In turn, this was making poll interval decrease even after step was done. (Poll interval decreases already before step in this scenario, because we see large offsets and end up with no good peer to select). function old new delta reset_peer_stats 157 139 -18 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-12-04ntpd: comment out "spike detection" codeDenys Vlasenko
function old new delta update_local_clock 982 835 -147 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-12-04ntpd: promote log level 3 to productionDenys Vlasenko
Without it, peer selection logic is hard to debug function old new delta update_local_clock 861 982 +121 select_and_cluster 962 1065 +103 common_ping_main 1788 1821 +33 huft_build 1287 1296 +9 chpst_main 708 704 -4 INET6_resolve 127 119 -8 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 4/2 up/down: 266/-12) Total: 254 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-12-04ntpd: let user know if spike was detectedDenys Vlasenko
function old new delta update_local_clock 861 943 +82 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-07-30Whitespace fixesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-05-23ntpd: set offset to 0.0 in "usync" eventDenys Vlasenko
function old new delta ntpd_main 1030 1026 -4 Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-05-22ntpd: set G.last_script_run even if script isn't configuredDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-05-22ntpd: make "unsync" code actually work.Denys Vlasenko
While at it: don't run "periodic" if interrupted by a signal. Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-05-22ntpd: drop delay outliers; run "unsync" handler if no replies for some timeDenys Vlasenko
function old new delta ntpd_main 960 1029 +69 recv_and_process_peer_pkt 834 892 +58 ------------------------------------------------------------------------------ (add/remove: 0/0 grow/shrink: 2/0 up/down: 127/0) Total: 127 bytes Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-03-29libbb: introduce and use strftime_[YYYYMMDD]HHMMSS()Denys Vlasenko
function old new delta strftime_fmt - 53 +53 strftime_YYYYMMDDHHMMSS - 12 +12 strftime_HHMMSS - 12 +12 human_time 44 43 -1 fmtstr_t 9 - -9 step_time 361 345 -16 watch_main 261 232 -29 ------------------------------------------------------------------------------ (add/remove: 3/1 grow/shrink: 0/3 up/down: 77/-55) Total: 22 bytes text data bss dec hex filename 919203 932 17692 937827 e4f63 busybox_old 919209 932 17692 937833 e4f69 busybox_unstripped Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-01-14ntpd: fix incorrect m_status field in outgoing packets. Closes 5120Paul Marks
When using busybox ntpd with an NTPv3 client and NTPv4 server (or vice versa), the version numbers can be incorrectly ORed together, yielding the bogus value of "NTPv7". This makes ntpd unusable with clients such as Chrony and Windows "Internet Time". This patch avoids the version mangling, by copying only the Leap Indicator bits from the server's status field. Signed-off-by: Paul Marks <paul@pmarks.net> Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2013-01-14whitespace fixes. no code changesDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
2012-12-19CONFIG_PID_FILE_PATH: new configuration option for pidfile pathsAnthony G. Basile
We set a default path for the directory where pidfiles are create when FEATURE_PIDFILE is selected. The default has no effect on applets which must specify a pidfile path on the command line to run, and it can be overridden by applets which optionally allow the user to specify the pidfile path. We also add pidfile write/remove support for klogd, ntpd and watchdog. For syslogd, we add a missing remove_pidfile() for better cleanup on daemon exit. Signed-off-by: Anthony G. Basile <blueness@gentoo.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-07-05include sys/resource.h where neededMike Frysinger
We use functions from sys/resource.h in misc applets, but don't include the header. This breaks building with newer glibc versions, so add the include where needed. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-06-11ntpd: on time step, kill all outstanding replies from other peersDenys Vlasenko
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 17:15:38 +0000