| Age | Commit message (Collapse) | Author |
|---|
|
Call i2c_set_slave_addr() unconditionally as busy checking
is skipped depending on force argument.
Clarify usage texts for -f and -a flags.
Signed-off-by: Nikolaus Voss <nv@vosn.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
i2ctransfer sends and receives user defined i2c messages
v2: apply Xabier's comments: add -a option, don't decrement argc,
use bb_show_usage() and xzalloc()
v3: fix possible out of bound access to msgs[nmsgs]
Reviewed-by: Xabier Oneca -- xOneca <xoneca@gmail.com>
Signed-off-by: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
bb_ask_y_confirmation_FILE - 83 +83
inetd_main 2033 2043 +10
udhcp_send_kernel_packet 295 301 +6
rmescapes 306 310 +4
send_tree 353 355 +2
i2cdetect_main 674 672 -2
confirm_or_abort 43 38 -5
get_terminal_width_height 242 234 -8
bb_ask_y_confirmation 76 10 -66
xargs_main 823 755 -68
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 4/5 up/down: 105/-149) Total: -44 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
bb_ask_y_confirmation
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
When 'i' or 's' modes are selected block array is filled from offset 3
(blen = 3) but copied to data.block buffer from offset 0 so first 3 bytes
contains garbage from stack.
The buffer that is sent is also 3 bytes too long due to those extra 3
bytes.
Signed-off-by: Avi Fishman <AviFishman70@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
packed_usage 31624 31615 -9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Installing headers from upstream i2c-tools makes it impossible to
build the busybox version due to redefined symbols. This is caused by
the fact that linux/i2c-dev.h from i2c-tools overwrites the one from
linux uapi and defines symbols already defined by linux' linux/i2c.h.
Drop this include and simply re-implement the relevant defines from
linux/i2c-dev.h in miscutils/i2c-tools.c.
Tested by building on systems with and without i2c-tools headers.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
We no longer use common_bufsiz1 in i2c-tools.
Don't include common_bufsiz.h.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
vgetopt32 1318 1392 +74
runsvdir_main 703 713 +10
bb_make_directory 423 425 +2
collect_cpu 546 545 -1
opt_chars 3 - -3
opt_complementary 4 - -4
tftpd_main 567 562 -5
ntp_init 476 471 -5
zcip_main 1266 1256 -10
xxd_main 428 418 -10
whois_main 140 130 -10
who_main 463 453 -10
which_main 212 202 -10
wget_main 2535 2525 -10
watchdog_main 291 281 -10
watch_main 222 212 -10
vlock_main 399 389 -10
uuencode_main 332 322 -10
uudecode_main 316 306 -10
unlink_main 45 35 -10
udhcpd_main 1482 1472 -10
udhcpc_main 2762 2752 -10
tune2fs_main 290 280 -10
tunctl_main 366 356 -10
truncate_main 218 208 -10
tr_main 518 508 -10
time_main 1134 1124 -10
tftp_main 286 276 -10
telnetd_main 1873 1863 -10
tcpudpsvd_main 1785 1775 -10
taskset_main 521 511 -10
tar_main 1009 999 -10
tail_main 1644 1634 -10
syslogd_main 1967 1957 -10
switch_root_main 368 358 -10
svlogd_main 1454 1444 -10
sv 1296 1286 -10
stat_main 104 94 -10
start_stop_daemon_main 1028 1018 -10
split_main 542 532 -10
sort_main 796 786 -10
slattach_main 624 614 -10
shuf_main 504 494 -10
setsid_main 96 86 -10
setserial_main 1132 1122 -10
setfont_main 388 378 -10
setconsole_main 78 68 -10
sendmail_main 1209 1199 -10
sed_main 677 667 -10
script_main 1077 1067 -10
run_parts_main 325 315 -10
rtcwake_main 454 444 -10
rm_main 175 165 -10
reformime_main 119 109 -10
readlink_main 123 113 -10
rdate_main 246 236 -10
pwdx_main 189 179 -10
pstree_main 317 307 -10
pscan_main 663 653 -10
popmaildir_main 818 808 -10
pmap_main 80 70 -10
nc_main 1042 1032 -10
mv_main 558 548 -10
mountpoint_main 477 467 -10
mount_main 1264 1254 -10
modprobe_main 768 758 -10
modinfo_main 333 323 -10
mktemp_main 200 190 -10
mkswap_main 324 314 -10
mkfs_vfat_main 1489 1479 -10
microcom_main 715 705 -10
md5_sha1_sum_main 521 511 -10
man_main 867 857 -10
makedevs_main 1052 1042 -10
ls_main 563 553 -10
losetup_main 432 422 -10
loadfont_main 89 79 -10
ln_main 524 514 -10
link_main 75 65 -10
ipcalc_main 544 534 -10
iostat_main 2397 2387 -10
install_main 768 758 -10
id_main 480 470 -10
i2cset_main 1239 1229 -10
i2cget_main 380 370 -10
i2cdump_main 1482 1472 -10
i2cdetect_main 682 672 -10
hwclock_main 406 396 -10
httpd_main 741 731 -10
grep_main 837 827 -10
getty_main 1559 1549 -10
fuser_main 297 287 -10
ftpgetput_main 345 335 -10
ftpd_main 2232 2222 -10
fstrim_main 251 241 -10
fsfreeze_main 77 67 -10
fsck_minix_main 2921 2911 -10
flock_main 314 304 -10
flashcp_main 740 730 -10
flash_eraseall_main 833 823 -10
fdformat_main 532 522 -10
expand_main 680 670 -10
eject_main 335 325 -10
dumpleases_main 630 620 -10
du_main 314 304 -10
dos2unix_main 441 431 -10
diff_main 1350 1340 -10
df_main 1064 1054 -10
date_main 1095 1085 -10
cut_main 961 951 -10
cryptpw_main 228 218 -10
crontab_main 575 565 -10
crond_main 1149 1139 -10
cp_main 370 360 -10
common_traceroute_main 3834 3824 -10
common_ping_main 1767 1757 -10
comm_main 239 229 -10
cmp_main 655 645 -10
chrt_main 379 369 -10
chpst_main 704 694 -10
chpasswd_main 308 298 -10
chown_main 171 161 -10
chmod_main 158 148 -10
cat_main 428 418 -10
bzip2_main 120 110 -10
blkdiscard_main 264 254 -10
base64_main 221 211 -10
arping_main 1665 1655 -10
ar_main 556 546 -10
adjtimex_main 406 396 -10
adduser_main 882 872 -10
addgroup_main 411 401 -10
acpid_main 1198 1188 -10
optstring 11 - -11
opt_string 18 - -18
OPT_STR 25 - -25
ubi_tools_main 1288 1258 -30
ls_options 31 - -31
------------------------------------------------------------------------------
(add/remove: 0/6 grow/shrink: 3/129 up/down: 86/-1383) Total: -1297 bytes
text data bss dec hex filename
915428 485 6876 922789 e14a5 busybox_old
914629 485 6872 921986 e1182 busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Those two spaces after tab have no effect, and always a nuisance when editing.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Commit e6a2f4cc changed the way common_bufsiz1 works. Now it needs to
be initialized before using, but i2cdump wasn't updated by said patch.
Since the fact that we're using common_bufsiz1 here isn't obvious (no
G_INIT() macro, no other global variables), drop it and simply
allocate the integer array required for block reads on the stack.
Tested with i2c block read on a Lenovo Thinkpad laptop.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
The config item is FEATURE_USE_BSS_TAIL. When it is off (default):
function old new delta
read_config 210 228 +18
doCommands 2279 2294 +15
ipneigh_list_or_flush 763 772 +9
ipaddr_list_or_flush 1256 1261 +5
display_process_list 1301 1306 +5
conspy_main 1378 1383 +5
do_lzo_compress 352 355 +3
do_lzo_decompress 565 567 +2
push 46 44 -2
inetd_main 2136 2134 -2
uevent_main 421 418 -3
addLines 97 92 -5
bb_common_bufsiz1 8193 1024 -7169
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181) Total: -7119 bytes
text data bss dec hex filename
829850 4086 9080 843016 cdd08 busybox_old
829901 4086 1904 835891 cc133 busybox_unstripped
FEATURE_USE_BSS_TAIL=y:
read_config 210 228 +18
doCommands 2279 2294 +15
ipneigh_list_or_flush 763 772 +9
ipaddr_list_or_flush 1256 1261 +5
display_process_list 1301 1306 +5
conspy_main 1378 1383 +5
do_lzo_compress 352 355 +3
do_lzo_decompress 565 567 +2
inetd_main 2136 2134 -2
bb_common_bufsiz1 8193 - -8193
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195) Total: -8133 bytes
text data bss dec hex filename
829850 4086 9080 843016 cdd08 busybox_old
829911 4086 880 834877 cbd3d busybox_unstripped
FIXME: setup_common_bufsiz() calls are missing.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
This makes busybox i2cdump compatible with the upstream version, which
also displays the numeric error value in case of a block read failure.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
We should bail-out if i2c_smbus_read_block_data() or
i2c_smbus_read_i2c_block_data() return 0 or less. Add the missing check
for the former and fix the existing for the latter.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Currently we're calling i2c_smbus_read_block_data() for both 'i' and 's'
mode parameters. If the bus doesn't support SMBus block mode, then the
i2c access ioctl() fails. Make i2cdump behave compatibly with upstream
version by calling i2c_smbus_read_i2c_block_data() for I2C block.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
We currently read data twice in byte mode. Add a check to avoid calling
i2c_smbus_read_i2c_block_data() if we're not in I2C or SMBus block mode.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
If the bus doesn't support SMBus Quick Write or Receive Byte commands
and we're running in auto mode all addresses will be skipped resulting
in an empty table being printed.
This is caused by not restoring the auto mode after it's been changed
for certain address ranges - we need an additional variable to hold the
temporary state.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
print_intel_cstates 499 511 +12
file_insert 355 364 +9
dpkg_main 2944 2940 -4
ifenslave_main 645 640 -5
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/2 up/down: 21/-9) Total: 12 bytes
text data bss dec hex filename
937564 932 17676 956172 e970c busybox_old
937164 932 17676 955772 e957c busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Benefits are: drops reference to out-of-line putchar(), fixes a few cases
of failed string merge.
function old new delta
i2cdump_main 1488 1502 +14
sha256_process_block64 423 433 +10
sendmail_main 1183 1185 +2
list_table 1114 1116 +2
i2cdetect_main 1235 1237 +2
fdisk_main 2852 2854 +2
builtin_type 119 121 +2
unicode_conv_to_printable2 325 324 -1
scan_recursive 380 378 -2
mkfs_minix_main 2687 2684 -3
buffer_fill_and_print 178 169 -9
putchar 152 - -152
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 7/4 up/down: 34/-167) Total: -133 bytes
text data bss dec hex filename
937788 932 17676 956396 e97ec busybox_old
937564 932 17676 956172 e970c busybox_unstripped
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Rename the defines not present in linux UAPI headers to better reflect
their purpose.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Most applets include linux' user API headers instead of duplicating
the definitions. Make it the case for i2c-tools as well.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Since there are now more statements in the if block after the while loop
in list_i2c_busses_and_exit(), there's no need for a label.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Split i2cdump_main() into shorter functions. Simplify the code a bit.
Make block an array of ints so that we can store negative results of
read functions (fixes a bug found by Denys Vlasenko).
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
We should only warn the user about addresses to be skipped if
(mode == DETECT_MODE_AUTO).
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Addresses 0x00-0x02 shouldn't be scanned by default. This patch makes
'first' default to 0x03 and only enables lower addresses if '-a' option
is passed
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
We can't use i2c_set_slave_addr() in i2cdetect, as we have to check for
EBUSY after calling ioctl(I2C_SLAVE) and print 'UU' on busy addresses
instead of bailing-out.
While we're at it: reorder definitions of local vars in i2cdetect_main().
function old new delta
i2cdetect_main 703 744 +41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 41/0) Total: 41 bytes
text data bss dec hex filename
826097 4164 9584 839845 cd0a5 busybox_old
826145 4164 9584 839893 cd0d5 busybox_unstripped
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Trying to access /dev/i2c/* on every error after opening /dev/i2c-* can
mislead users who e.g. don't have root access. Instead of bailing-out
with "permission denied" we currently print "no such file or directory".
Fix it by trying open("/dev/i2c/%d") only if we got ENOENT.
Upstream i2cdetect tries to get any info it can from /sys and /proc even
when invoked by an unprivileged user, but we don't want to add unnecessary
bloat.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Calling 'i2cdetect -l' only displays usage and exits. Fix it by
correctly parsing command-line arguments.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
function old new delta
is_prefixed_with - 18 +18
complete_username 78 77 -1
man_main 737 735 -2
fsck_device 429 427 -2
unpack_ar_archive 80 76 -4
strip_unsafe_prefix 105 101 -4
singlemount 1054 1050 -4
rtc_adjtime_is_utc 90 86 -4
resolve_mount_spec 88 84 -4
parse_one_line 1029 1025 -4
parse_conf 1460 1456 -4
may_wakeup 83 79 -4
loadkmap_main 219 215 -4
get_irqs_from_stat 103 99 -4
get_header_cpio 913 909 -4
findfs_main 79 75 -4
fbsplash_main 1230 1226 -4
load_crontab 776 771 -5
expand_vars_to_list 1151 1146 -5
date_main 881 876 -5
skip_dev_pfx 30 24 -6
make_device 2199 2193 -6
complete_cmd_dir_file 773 767 -6
run_applet_and_exit 715 708 -7
uudecode_main 321 313 -8
pwdx_main 197 189 -8
execute 568 560 -8
i2cdetect_main 1186 1176 -10
procps_scan 1242 1230 -12
procps_read_smaps 1017 1005 -12
process_module 746 734 -12
patch_main 1903 1891 -12
nfsmount 3572 3560 -12
stack_machine 126 112 -14
process_timer_stats 449 435 -14
match_fstype 111 97 -14
do_ipaddr 1344 1330 -14
open_list_and_close 359 343 -16
get_header_tar 1795 1779 -16
prepend_new_eth_table 340 323 -17
fsck_main 1811 1794 -17
find_iface_state 56 38 -18
dnsd_main 1321 1303 -18
base_device 179 158 -21
find_keyword 104 82 -22
handle_incoming_and_exit 2785 2762 -23
parse_and_put_prompt 774 746 -28
modinfo 347 317 -30
find_action 204 171 -33
update_passwd 1470 1436 -34
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/49 up/down: 18/-540) Total: -522 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
|
Add a minimal implementation of i2cget, i2cset, i2cdump and i2cdetect
tools. Supports most features of upstream i2c-tools.
function old new delta
i2cdump_main - 1444 +1444
i2cset_main - 1239 +1239
i2cdetect_main - 611 +611
list_i2c_busses_and_exit - 532 +532
packed_usage 29975 30438 +463
i2cget_main - 380 +380
check_read_funcs - 140 +140
i2c_funcs_tab - 128 +128
confirm_action - 100 +100
i2c_dev_open - 57 +57
i2c_smbus_access - 44 +44
confirm_or_abort - 43 +43
check_funcs_test_end - 39 +39
i2c_smbus_read_word_data - 38 +38
i2c_smbus_read_byte_data - 38 +38
i2c_smbus_read_byte - 37 +37
i2c_set_slave_addr - 32 +32
applet_names 2480 2512 +32
adap_descs - 32 +32
i2c_set_pec - 29 +29
get_funcs_matrix - 21 +21
i2c_parse_data_addr - 18 +18
i2c_parse_bus_addr - 18 +18
i2c_bus_lookup - 18 +18
i2c_smbus_write_byte - 17 +17
applet_main 1440 1456 +16
will_skip - 14 +14
no_support - 11 +11
applet_nameofs 720 728 +8
applet_install_loc 180 182 +2
------------------------------------------------------------------------------
(add/remove: 26/0 grow/shrink: 5/0 up/down: 5601/0) Total: 5601 bytes
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
|
